Unable to preview sound in timeline

I have a sound file (.mp3) that I would like to animate to. I am attempting to preview several frames in the timeline to see how my animation is syncing up as I work on it, but no sound plays in the timeline. Doing a publish/preview every time I want to check it doesn't seem like the best option. I've tried CS4 and CS5 and it's the same result in both. I'm curious as to what I am missing, or do you animators out there do something different?

It was a very newbie question, but thanks for the help! I always just had the sync set to "start". Works wonders now.
Grr...wanted to give you both full points but I can't

Similar Messages

Unable to play preview clip on timeline Premiere Elements 10

All of a sudden, I'm unable to preview clips, even in unfinished projects that used to work. I'm running Premiere Elements 10, Windows 8.1, Flash updated etc. These clips are activated, not rendered (red line above) but doesn't show. However, if I play the clip, I can hear the sound. Sometimes the program crashes, and I have to start all over again.
Update: Now, when I click on the clip on the timeline, preview window shows one frame, while the marker continues to "play" the clip(without showing anything but the first frame as a still picture. When hitting pause again, preview window shows a still where the clip was stopped...This happens on some of the clips on the timeline. Some are just pure black
Intel i7-3770 CPU @ 3.40 GHz 64 bit
Pls help

Yes, that could be it!
I do have a NVIDA graphics card! And it's updated with the latest drivers...
Now, I'll have to find out how to do a roll back...I'll read the thread you suggested and hope for the best!
Thanks for the answer!
Additional info:
Some of the clips that wont play in the preview or full screen window, shows a still picture when setting thetimeline to it AND THE clicking on the preview window. A still shows up, but nothing happens when a hit play. Some of the clips are from my GoPro Hero3 Black, but they seem to pay fine as long as I havn't used zoom on them. On many GoPro clips I've used zoom to minimize the "fisheye" effect, and then it wont play.
Med vänliga hälsningar
Christer
Sweden
@sascaptain
Skickat från min iPad
6 nov 2013 kl. 15:46 skrev "A.T. Romano" <[email protected]>:
Re: Unable to play preview clip on timeline Premiere Elements 10
created by A.T. Romano in Premiere Elements - View the full discussion
ramlosabrunn
Any chance you could be part of a growing crowd of Premiere Elements 10 NVIDIA video card users who have run into the NVIDIA video card driver issue. For the now of this issue, the answer seems to be to roll back the driver version rather than assure that you have the latest version of it.
Please check out the following thread here where I have sought to keep track of these happenings.
http://forums.adobe.com/thread/1317675?tstart=0
Please let us know if any of that might apply to your situation.....what video card, what computer operating system?
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5819615#5819615
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Unable to play preview clip on timeline Premiere Elements 10
To unsubscribe from this thread, please visit the message page at Re: Unable to play preview clip on timeline Premiere Elements 10. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Flash CS5.5 unable to import sounds and massive animation lag

So, having reached a point where I want to add sound to my animation (which is extremely laggy for no particular reason), I find myself completely unable to import sounds of any form into Flash. "Oh, crap" I say to myself, and come onto the forums looking for a solution. Apparently importing the sound into a sound editor (ie audition) and then resaving it works, except it hasn't in my case and I'm still stuck with this stupid "Couldn't import [filename]" error.
(and my animation is extremely laggy for some reason in case you hadn't realised from the hints above. Does this have something to do with the fact that I am using blurs in the animation and then animating them with tweens, or is flash cs5.5 (and 5) just not good at rendering blurs efficiently?)

In Flash, all of the animation is done at runtime, not during authoring. This means that a blur, for instance, is done when the user is looking at the movie. This is completely different from the way that video is played on a computer. All of the animation workload is on the user's processor.
If you have a normal bitmap image that you are blurring with a blur filter and then animating that bitmap on the timeline in a tween, then you are giving the processor a lot of work to do. If you import a blurred bitmap and animate that, the processor has much less work to do.
That may or may not describe the problem that you are seeing.
I have no idea what the problem is with the sound files. Can you post one of the sound files so that someone could take a look at it?

Previewing Sound In Logic!

When working in a higher sample rate. You can't really preview your audio like in protools. Why is this? The audio is gonna be really sped up due to old Sample Rate. is there a way to listen to preview converted to whatever sample rate your working, meaning that... it let's you hear what it sounds like at it's original?

You can always preview sounds in Finder: select audio file(s), press Space, and then navigate using arrow keys if you want to preview multiple files.

Unable to preview Contract Terms for Standard Purchase Order

Unable to preview View Contract Terms for Standard Purchase Order,displays error
We have defined the same contract terms and Document type layouts to documents Contract Purchase Order and Standard Purchase Order.
Created a Contract PO,Attached a template able to preview the contract template in PDF successfully
Created a Standard PO,Attached a template not able to preview the contract template in PDF
Displays the foll error
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
### Steps to Reproduce Problem ###
Steups
Created a custom XSL-FO template for Contract template and defined it for Standard PO and Contracts PO.
Steps to Reproduce
1.Create a PO,give any category of 100 Qty
2.Click Terms and CLick Author Contract Terms\
3.Select the custom Template ,Click Apply Template
4.Click Preview.
Following error displayed
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
Please Note:The above scenario works for Contracts PO.
The problem is only for Standard PO
We have reviewed note:454479.1
The file version of POXVCOMB.pls 115.69.11510.28
But we have another test instance this also has the same version , the scenario works fine
So we are confused why this is reproducible only for a particular instance with same file versions
If anyone can suggest a solution pls give me a reply
Already SR is logged for the same -SR 3-1272761221, awaiting reply from support

Please reply if any update on the above query is present.

Xcelsius 2008 - Unable to preview changes made in design mode

Xcelsius 2008 - Unable to preview changes made in design mode
I have installed Xcelsius 2008 (RTM) and also Service Pack 1 / Fix Pack 1.1. Unfortunately, I can now not preview changes I made in design mode (but can see the change in design mode). In addition, if I save the changes made to the Excel spreadsheet (using this as the datasource) and then exit out of the application, then go back in, the changes have not been saved?!
I have also installed Fix Pack 1.3, but the same issues occurs.
This is causing us issues as we have developed a number of dashboards that can no longer be updated.
Please could someone advise?
Many thanks,
Neil.

I would recommend decomposing large sets into more manageable sets. For instance, if you have data for a very large regional district, decompose the data into smaller sets for sub-districts.
As for a paper, I'm not sure, but the main determinant of performance is how many cells you bind to the component. For a typical component on a typical computer, I'd recommend no more than 9000 cells. On a weaker computer less, on a stronger computer more.

How do I unable the preview in the clone stamp tool in elements 11

How do I unable the preview, in the clone stamp in elements 11. I find it more anoying than usefull

If this is a question for Photoshop Elements, you should probably post it to the Photoshop Elements forum, Hazyy.
http://forums.adobe.com/community/photoshop_elements

Camera Raw 4.4.1 still unable to preview Canon 40D CR2 files

Even after installing Camera Raw 4.4.1 plugin update as per installation instructions and purging central Cache...I am still unable to preview Canon 40D Raw (CR2) or Digital Negative (DNG) files on CS3 Bridge or Photoshop.
Does anyone have any suggestions? Thanks.

Jeff..thanks for your helpful feedback. OS used is Vista. After recieving your suggestion I confirmed that I saved the plug-in to Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats - and then rebooted the system. This seemed to resolve the problem and i can now preview raw file.
Jeff, thanks again. Cheers, Doug

How to preview sound without previewing all ?

Hello everyone,
I would like to know how to do to preview sound in AE without RAM previewing all the clip I'm working on. I have a clip of 3 mins and I need to preview it all from the begining to modify something at 2min45.
How can I RAM preview only a part of my clip ?
Thank you,
Alix

Here's the section in After Effects Help about previewing audio only.
> How can I RAM preview only a part of my clip ?
You can set a work area to RAM preview only a specific are. That is also in After Effects Help.

Nautilus doesn't preview sound files

Hi everyone.
Why "preview sound files" isn't working in Gnome 2.12.2? Do you know if I need some add-on?
Thanks in advance.

First make sure esd is installed
pacman -S esd
, and make sure esd is running on startup ( Desktop -> Preferences -> Multimedia system selector (if it doesn't exist look for something with multimedia or sound, i have Gnome 2.14 and those things have changed AFAIK) -> Check "turn on sound"
now install mpg321
pacman -S mpg321
Now logout/login (or reboot) and it should work

Virtual PC suddenly unable to play sounds

Hi everybody,
Just recently, when I try to start up virtual PC I get a message that says virtual PC was not able to start up the mac audio system, and is therefore unable to play sounds. Up until then, sounds had always played just fine in virtual PC, and I have no idea what could have caused the change, as I don't remember screwing with any sound/virtual pc settings, or installing any updates or anything right before this happened.
Does anybody have any ideas about how I might troubleshoot and/or fix this issue?
I'm running the most recent version of both OS X (10.4.8) and virtual PC (7.0.2).

Since VPC is not an Apple product, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups.google.com/groups/dir?sel=33607053> rather than an Apple forum that focuses on using Mac OS X.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

Help me! cant preview sound in after effects CS4 ;(

Hey there , I am currently working on a project and i have beeen having some probelms in after effects cs4 running on 32 bit Windows 7.
Normally to preview sound when im working on a project i could press the .del key on the numerous pad on my keyboard but now when i press it i get a error saying "After effects error: could not allocate sound memory."
Any idears on what to do :S
-Dan

You can change the amount of audio that is rendered for previews, which can be useful if you're running into memory problems.
The amount of audio that is rendered for previews is specified by the Duration setting in the Previews preferences.

TS1717 unable to preview or download music

unable to preview or download music

Hi gobill, I received your .muse file from technical support. Your file has exposed a bug. At this point I haven't diagnosed whether or not it's new in 7. Regardless, I'll work on a fix. In the meantime you can avoid this error if you define and apply graphic styles for the four states of the tabs in the accordion on your home page.
Sorry for the inconvenience. Let me know if you need further help.

Hp Pavilion g6 is suddenly unable to detect sound card

Hp Pavilion g6 is suddenly unable to detect sound card

Error 303 means you need to replace the hdd. If you are in warranty HP will send a replacement. If you are not in warranty you can use a retail SATA laptop hdd. Install the new drive, boot with Recovery Disks to restore the laptop to factory setup.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I m unable to hear sound while playing games .... ...

i m unable to hear sound while playing games .... please help

Hi,
I was having the same problem as you were my Nokia.
Make sure that (in settings) your "Aplacation-sounds" are turned on.
In fact, make sure ALL sounds are turned on, just in case.
Hope this helps

Unable to preview sound in timeline

Similar Messages

Maybe you are looking for