Unable to print a good 8x10

I shoot in RAW and photo is perfect as a 4x6, 5x7, but when I print to 8x10, it's not a full 8x10. If I do "zoom to fit" it cuts part of the photo. How can I make a 4x6 and a 8x10 look the same?

You cannot. Ansel couldn't. Nobody can take a 4 x 6 RATIO and turn it into an 8 x 10 ratio without chopping a bit, or stretching, or some such.
You'll have to recrop to the correct ratio in order to print an 8 x 10. If you go back to the original, better cropping is likely to result than if you start cropping from the 4 x 6 (which equals an 8 x 12).

Similar Messages

I have recently installed Aperture 3.1 and my Canon MG 6150 is unable to print good quality photos from it I have to use iPhoto to produce good quality prints. o

I have recently installed Aperture 3.1, but my Canon MG6150 has been unable to print photos of good quality from the Aperture print engine
and I have to return to iPhoto to obtain prints I am happy with.

I have now to reply to my own question having later found a thread over another canon printer with the answer. In the second print dialog box you click on "show details" and then on "layout". The following schreen shots make this clear. The settings can then be saved as a preset.
It's a pity the Canon helpdesk was not able to give me this information. I hope that this will help others with similar problems.
NTMJ

Unable to print ... Scanning and copying is working good ..

We got our HP Deskjet Ink Adv 2060 August 2012. since then it works really well ... until last 2days ago when we want to do printing but it started not to print .. the dialogue box is not appearing to tell what something is happening ... Can you tell what could be reason why it is not printing?

Hi Snowflakes528,
Thank you for visiting the HP Support Forums! I see you are not able to print or scan on your HP Deskjet Ink Advantage 2060. You are not able to see the print dialogue box pop up when you attempt to print.
First I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know the results of the PSDR, if you are still unable to print and scan leave the following information:
1. How are you connected, USB or Wireless?
2. What is your current Operating system, Windows or Mac and which version?
3. Are you getting any error messages on the print or computer?
I will watch for your reply.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to print xml publisher report in excel format in R12

Hi All,
We are unable to print xml publisher report in excel format in R12. We were able to see the excel output but it's printing junk characters while printing and it's printing without any issue with PDF format.
Please let me know how to fix this issue.
Thanks,
Raja

Hi Raja,
I presume you have gone through the debugging process of testing your template locally first to get the expected result.....
If yes, this note might probably be helpful "Changing Output Format to RTF or Excel in XML Publisher Request Does Not Display Output Correctly (Doc ID 404512.1)"
Good Luck,
Lamine Balde

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Unable to print/scan- unable to communicate with printer message

I am unable to print due to a unable to communicate with printer error messaege. I was previously able to print just fine( a few hours a go) the IP addy has not change. The printer is connected to the network and able to download updates etc just fine. The printer is connected but they just wont recognise each other. Print and scan doctor was a complete waste of time, it showed the printer insatlled but then could not connect. Can someone please help getting so very frustrated with these products. Printer is the 6700 All in one series and laptop is Hp Envy.

Hello @leilee , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're experiencing connectivity issues. I would like to help!
I would first recommend a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend utilizing this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to print in Illustrator CS3

I am now encountering my recurring problem - trying to print one of my maps. To give some background, this is for a boardgame and consists of almost solely Illustrator effects. There is a small amount of material from Photoshop incorporated. It consists of some 20 layers of various effects, and was generated in Illustrator CS 3 (13.0.2) under Mac OS X 10.6.8.
Over the years, I have generated a number of large maps, for various efforts. These range in size from about 6-12 sq.ft. All the maps are generated in Adobe Illustrator, ranging from Illustrator 10 to CS3. The maps are generated on beefy hardware platform (MacPro, various iterations, lots of RAM), with no problems in generating the map artwork.
However, over the years, when it comes to trying to print of of these maps, I am almost completely unable to print them. I dont have access to a large format printer, so I try and print these using various small size printers, and tiling the pages. However, this inevitablely fails. I am unable to print on any printer, under any OS (Mac OS X or Win XP), with any hardware, with any settings I have tried.***
The current effort is an .AI file of about 100 MB is size. I have also saved this same file as a PDF (flattened layers from AI, ~100MB in size), and as a PDF without Illustrator editing capability (this reduces the file size to 12 MB).
I have tried using Illustrator or Acrobat to print these documents. At best, I can sit there and watch the status bar creep to 100%, and then sit there for 15 minutes, at which point I give up. At no time do any of the printers show any activity.
I have tried printing just one tile (page) of the map, and it does the same thing.
This is of course intensely frustrating to encounter this again. I cannot figure out why this is happening. Is there some sort of pre-press operations I need to do ?
thanks,
Tom
*** There is one exception. I have a small Brother HL-2270DL printer attached to my home network. Using Illustrator, I can print the entire tiled map in a matter of a few minutes. I have no idea why this works. Acrobat still totally fails. As satisfying as actually printing something out, I need a color print.

Mike, while I am currently struggling with this one file, this same issue has dogged me for many years, over several different files, with, as far as I can tell, nothing in common, other than I generated them (the problem lies between the keyboard and the chair ? : ) Each of these maps is heavy AI work, with gratuitous use of textures, patterns, swatches, brushes and feathering effects. There is a little bit of PS Placed artwork, but not much.
I will see if leaving out the placed artwork makes things work better, but the amount of Placed artowrk is pretty small.
What really baffles me, is that in its most distilled format (PDF with no Illustrator editing), the file is only 12 MB. I cant fathom how a 12 MB file can present a challenge to any computer made in thre last 5 years.
I havet not yet explored the Advanced printing options, and I dont know what most of that does (even after doing AI for 8 years or more, I am still a hack).
Is there a good book that explains the different printing options and strategies ? I am flying somewhat blind when it comes to something other than simple printing.
One further data point: I opened up the previously mentioned 12 MB PDF, using Photoshop. I rasterized the document to the tune of 300 DPI, and then saved it as a Photoshop PDF. My thought was that opening in PS destroys any vector information and saving back out as a PS PDF then puts it into a form I could print from work. From work, I opened this file on a Windows machine with plenty of horsepower and resources. I attempted to print to a beefy Xerox 7xxx series office printer. I tiled the document an hit "print". The progress bar stayed at 0% for 20 minutes. During that time, the CPU load ranged from ~5-20%, and the free RAM stayed at about 1.7 GB. I checked the printer during this time, and it registered a print job, but no progress was made. I gave up after 20 minutes.
thanks,
Tom

Unable to print with new installation of Adobe Reader X

Yesterday I installed Adobe Reader X on my Dell laptop running Windows XP. After installing, I was unable to print to a HP Laserjet 4700 printer (only printer I tried). I rebooted my laptop and tried to repair Adobe Reader and I still can't print. I uninstalled, rebooted, and re-installed Adobe Reader X and it still won't print. When I click on the print button it just locks up with the hour glass symbol running (only locks up Adobe Reader). I have Adobe Acrobat 9 full version on my computer also and it works fine printing the same documents (a newspaper article without graphics) to the same printer.
Any ideas what could be happening and how to fix it?

Ditto on Darrenz16's problem. New WIN7-64 Home Premiun system with Adobe Reader 10.1.2. Reads several files, then starts locking up when I try opening new files. Seems like Reader is failing to release some resource and eventually running out of whatever it is. Rebooting seems to help temporarily. Never had this problem on previous systems. A set of good examples are the .pdf files at the bottom of this page: http://www.hussman.net/weeklyMarketComment.html
I can open a few, but then Reader locks up trying to download the files.

My hp 1050 unable to print

my hp 1050 unable to print and after closing the catridge tray it is indicating or blinking light .,tell me some steps

Hello New_shah,
Thanks for the post. Well, depending on the light blinking or the sequence it can mean several things. I've included a link below with some excellent t-shooting steps to get the resolved for you. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02061335&cc=us&dlc=en&lang=en&lc=en&product=402...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Unable to print PDF files using Acrobat 8.

I had to uninstall and then reinstall Office for Mac 2011. I don't know if it's related or not, but since doing so I have been unable to print PDF files using Adobe Acrobat 8. After opening a PDF file and hitting print, Adobe Acrobat 8 crashes. Any suggestions? I already uninstalled and reinstalled Adobe Acrobat 8, but it still won't print PDF files. O

While you are having difficulty in printing a PDF file, you may try the subsequent steps. If you are in a rush and would like to print a simple document such as a letter, a form, or a calendar, you may print it as an image. Next option is that you may need to update your printer driver if the PDF does not print, the PDF prints as a blank page or with unreadable text or if you get an error message when you print. Sometimes, when you print a file that is on a thumb drive or a network, the file gets damaged. Then you have to open the copy on your hard drive and print again. At last, you can try printing the PDF using another printer and check your printer connection too if the PDF does not get printed. get more help to fix unable to printer PDF file hope this helps you.
Good Luck!

I am unable to consistently obtain good focus on my t4i

I am unable to get consistently good sharp pictures with my t4i even though I use a tripod. It seems that the auto-focus area is too large and it picks up and focuses on an object in a different plane. Is there any way around this - other than using manual focus? An example might be a bird on a branch in a tree where a foreground branch is in focus but the bird is not. I revert to live view and zoom in to focus manually but by the time I do this, the bird hs flown away.

Perhaps you're using poor lenses, but it’s not the camera. The T4i has as good of resolution as you need. With exception of some megapixel monster like the Nikon D800, you're not going to see a significant difference in the resolution unless you’re blowing these things up into huge prints.
Either your technique needs work, or your expectations are out of the league of consumer (and lower level pro) setups.

Unable to Print to Epson printers using LPD on PPC, works on Intel

After updating to Leopard, I am unable to print to my network printer Epson 870 and CX6400 from my G5 Imac. Everything worked fine with Mac OS 10.4.x. It works from my MacBook running Leopard. I am unable to select (even using browse) the appropriate Gutenprint V.5.1.3 driver. It fails to output to print server. From my MacBook all my network printer works - Samsung ML-1710, Epson 870 and CX6400. From the PPC Imac, only the Samsung works.
If I share the printer from the MacBook, the iMac sees the printers and automatically selects the appropriate Gutenprint driver. I am using IPD. I also tried Window. I can not select the Gutenprint drivers. For the 870, I tried selecting Epson Stylus Color and Photo series 1.3 and Epson CX6000 series driver.
I've reloaded the drivers from Apple and also tried Epson's drivers. I haven't tried loading the standard (non-Apple) gutenprint drivers.
Any help will be greatly appreciated. Thanks.
Al

I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
I hope this helps.

Why am i unable to print off boarding passes for this weekend?

why am I unable to print off boarding passes for hols this coming w'end? I have spent hrs at home and with help from my local library but still no good and no prints. I didn't used to get these problems so why now??????????/

You ask "why" (twice), but you don't provide any information whatsoever. How do you expect anybody to help?

Suddenly I'm unable to print any pdf to any of my 3 printers.

Suddenly I'm unable to print any pdf to any of my 3 printers. Running Windows 8.1. I did have Acrobat 11 installed. When i would try to print I receive the message "unable to print document". When I click OK i then get a new message stating "no pages were selected to print". However, the dialog box clearly indicates that the proper pages WERE selected to print. i finally decided to uninstall Acrobat. i reinstalled Acrobat DC and still nothing prints. The same message occurs each time. The version of Adobe Read DC I'm using is 2015.007.20033. Please help.Can'

Juanrva is correct, the kb document is of absoltuely no help. I already found the link to the KB document and performed all those suggestions. Actually, I'm a bit disappointed that I'm referred back to a troubleshooting link that I was already referred to! All of my drivers are up to date and, like Juanrva, I, too, can print from any other software or program. My issue, though, developed 2 days ago with XI. When I couldn't find a way to fix it, I uninstalled XI with the intention of reinstalling it but DC was the only install option. After installing DC i tried to print again with the same results. I then tried to print as an image and that doesn't work either. I'm tempted to say that I'd like to go back to XI but I don't think that's a good solution. There was no warning, I could print from Xi on Wednesday at 7:44 PM but could not at 8:15 PM. I didn't upload or download anything, did not install anything new and my security and anti-virus program indicates there has been no suspicious activity. In the meantime, I have people sending me PDF's daily, all of which I need to print but cannot.

Unable to print suddenly !

Hello, I have an Emac operating on 10.3.5 and I have an Epsom 870 printer. I have had no problems over the last 3 years with this printer and this computer until now. When I click 'Edit print' in any programme I get the printing page but no response when I click 'print', except in Word which says 'there is a problem with the current printer'. I have checked all the obvious, connections, selection of printer in system preferences etc and everything is OK. Also, there is communication with the printer because the Print utility will work; Suggestions please. Please note there is limited Epsom Help support for this printer using OSX, but until now it has always worked fine. thanks, ginny

Ginny-
Unable to print suddenly !
It is not a good idea to print suddenly -- you should always print slowly and carefully so as not to scare the printer.
Under 10.4, you can reset the print system, but I don't think 10.3 supports that.
The backup plan when things went wrong in 10.3 was to delete your printer and re-setup (the same printer) in the Add-a-Printer window.

Unable to print a good 8x10

Similar Messages

Maybe you are looking for