Unable to print after installing the new Quicktime upgrade

I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

Latigna, welcome to Apple Discussions.
Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
Also look at Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
 Cheers, Tom

Similar Messages

  • Unable to Print After Installing Adobe Acrobat Reader Upgrades.

    . What software version of Abobe Acrobat Reader should be used for an HP PhotoSmart Plus printer? I currently have Adobe version  9.3 installed. I receive pop-up notices to install new Adobe Acrobat Reader software upgrades. I have installed the software upgrades and then my HP PhotoSmart Plus printer was unoperational. I deleted the Adobe software upgrades and my HP PhotoSmart Plus printer began to operate. I contacted HP technical support and was told there is no compatibility issues between Adobe Acrobat Reader and HP All-in-One Products. It might be a problem with the specific Adobe software upgrades. HP requested that I contact Adobe support for problem resolution. Has this problem ever happened to you? Any problem resolutions would be appreciated.

    Hello there! Welcome to the forums @Oldchev 
    I understand you cannot print, after installing your Officejet 7410 All in One  printer.
    Please let me know the following, and I'll do my best to help!
    What is the Operating System of the computer?
    Have you tested hardware functionality (made copies)?
    Have you tried printing from different programs?
    Have you tried uninstalling and reinstalling the software?
    What Firewalls and Anti-virus software are installed?
    Have you tried disabling or uninstalling them?
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

    After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

    Silly rabbit wrote:
    Ah, you didn't read the fine print on installing Lion, did you? None of your old software will run in Lion.
    You have two choices:
    A) Buy all new or updated software
    B) Partition the hard drive and install an older version of OSX to run your older apps.
    You did not give us any idea of what PowerPC apps you were running, so additional options:
    C)  Restore to Snow Leopard
    D)  Install Snow Leopard (and Rosetta which runs PowerPC apps) in Parallels 7 in Lion:
    Installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • I installed the new Quicktime (7.7), but than was an error. Now I can't open iTunes because error 2095.

    I wanted to install the new Quicktime but than it came an error. I started iTunes but it came just:
    QuickTime failed to initialize (error -2095)
    QuickTime is required to run iTunes. Please uninstall iTunes, then install iTunes again.
    but I don't wanna uninstall it. Will be my Database be away?
    Can somebody help me please?!
    Thanks forward.

    Hey Jack- Where did you find QuicTime 7.7 for Windows download?  I can't find v7.7, all Apple website links lead me to QT 7.6.9 as I noted here: https://discussions.apple.com/thread/3239439?tstart=0

  • After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
    Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.

    Hello josefromlaie,
    Thank you for using Apple Support Communities. 
    The following article provides some effective steps to troubleshoot trackpad issues:
    Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
    Regards,
    Jeff D. 

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • Has anyone's screen go blank and not boot up after installing the new yosemite OS

    has anyone's screen go blank and not boot up after installing the new yosemite OS

    Hi Mofimac,
    Thanks for visiting Apple Support Communities.
    If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
    Mac OS X: Gray screen appears during startup
    I recommend going through these first three sections first:
    Disconnect, test peripheral devices and network cables
    Perform a Safe Boot
    Reset the NVRAM / PRAM
    Best Regards,
    Jeremy

  • After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    After installing the new IOS my iphone 4s won't charge and less I restart it. Why is appl this happening? and What is apple doing about this?

    The iPhone has a hardware problem - with the battery or something else.
    The iPhone includes a one year warranty. If purchased new in October of 2012, it remains under warranty. Call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

    On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

        Hi JoeC695,
    That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
    Thanks,
    PamelaF_VZW
    Tweet us vzwsupport

  • Why has the sound gone all of a sudden after installing the new iOS 5.0.1?

    I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!

    Hi Guys,  I FIXED IT!!!!
    I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine. 
    Cheers

  • Anyone getting the constant pop saying to sign in with itunes up on their 4s after installing the new software?

    Whenever I open an application I get this annoying pop saying to sign in with itunes up on their 4s after installing the new software?  You have to press OK to make it go away but sometimes it doesn't and I have to reboot my phon

    have you signed into your Itunes account as it is asking?
    i received the same prompts and also to my icloud account and once i signed in all prompts went away
    If you have an icloud account you can now simply back up from your Iphone4 and not use your computer anymore

  • How do I get my calculator back after installing the new software

    How do I get my calculator back after installing the new iO7 software?

    I'll assume alot here,?but my guess is you installed the new playforsure firmware for the player. If that is the case then you will need the playforsure plug in for the Creative MediaSource Organizer. You can download it on this creative's site under downloads.

Maybe you are looking for

  • Default value for Cash Discount in Material Master (SKTOF)

    Hi, Could anyone please let me know how the default value of this field in the material master can be customized. Thanks,

  • Stumped with SwingWorker -- code compiles but doesn't run right

    Okay, sorry to post a ton of code, but I'm creating a swing gui that will use swing worker to create an object of the followng class, one method that sleeps and returns a random number: public class BigJob{      public int doBigJob(){           try {

  • Is the page numbering broken?

    Whenever I add a blank page no page numbering comes with it.  The default page has numbering.  No matter what selections I make in the Inspector window no pages numbers come up.  If I turn the page numbering to none page numbers still appear.  Am I m

  • Ouicktime 7.5 not working with Flip 4 Mac.

    I upgraded QT to 7.5 and now my QT plays the audio but no picture when running streaming WMV files. I checked with Flip 4 Mac but they said its a Quicktime issue.I'm running the latest version of flip 4 mac (2.2.0.49R). Anyone have the fix to this pr

  • Master With Two detailsin discoverer

    Hi , I would like to know your advice on the following . I Have this familiar data model : Master Folder : Items. Detail 1 Folder : Sales. Detail 2 Folder :Purchase . Detail.... It is required to build a comparsion between item sales and purchase in