Unable to print after software installation

After installation of Adobe Photoshop CS2 and Bridge CS2, I could not print from Photoshop (cannot print file because there is not enough memory (ram)) and all other applications (error during printing). Reinstalling the programs and disinstalling them did not help. I tried removing the printer from the printer utility and then reinstalling the driver. But I could not add the printer due to error 13. Another weird thing though, whenI tried to install the printer driver that came with the printer, it refused to install because it needed administrator or higher level access. I am sure I did not had any problem with this driver file before. Eventually I download the driver from Epson and it did not require administrator right to install. I tried using the Printer Setup Repair program, but it could not find anything wrong with it. Can someone please help me out here? Thanks.

I have exactly the same problem! HELP PLEASE!!
Thanks

Similar Messages

  • Unable to print since software update last thursday

    Unable to print since software update last Thursday

    Here's a link that might offer a fix: http://reviews.cnet.com/8301-13727_7-20074767-263/how-to-fix-printers-not-workin g-in-os-x-10.6.8/?part=rss&tag=feed&subj=MacFixIt
    There have been a few threads recently about printing problems since the 10.6.8 update. One was several pages long and offered a few other fixes - if I can find it I'll post back.
    Edited to add the link to the thread I mentioned: https://discussions.apple.com/thread/3137602?start=75&tstart=0
    Worth perusing the whole thread but 'velocius' seems to have posted a solution that has worked for several people (make sure you use the correct entry - 3 from the end of page 6)

  • Can't Print after Software Update

    After completing an Apple software update which included Epson printer software update 2.7 I am unable to print. I get an error message; Error:/Library/Printers/EPSON/InkjetPrinter2Filter/rastertoescpll.app/Contents/ MacOS/rasertoescpll failed. Can you please assist? Printer is Epson RX 650

    I had this problem with the RX640; it seems to affect a lot of Espon printers going back a long time, not just the latest update. Apparently some resourceful person out there says it is due to trying to print a pdf generated from word and various other programs and getting rid of this many-headed beast of a problem can be quite tricky.
    I first followed this http://kb.epson-europe.com/display/4n/kb/article.aspx?aid=3744&searchstring=&n=& tab=search&bt=4n&s= epson knowledge base article's instructions but had no joy. I then reinstalled Rosetta off my Snow Leopard install disk (which as an aside involved fixing my broken dvd drive!) and again had no joy, even after wiping the print settings, running the gutenprint uninstaller, deleting the drivers and trying to install the printer again using software updater. It seems like Epson software update 2.7 http://support.apple.com/kb/DL1398 on the Apple website does not work properly for selected Epson printers.
    To the solution. I downloaded and installed the previous Epson software update http://support.apple.com/kb/DL900 from the apple website and this finally did the trick. This is a beast of a file at 850MB compressed, containing drivers for ALL of Epson's printers so it does eat up some drive space. However as my printer is working again, I don't care!
    FYI I have read various solutions that were successful for various people. I am not certain if the last step alone would have been sufficient to get my printer working or if the previous Epson KB steps and Rosetta reinstall played a part. I hope this issue is resolved in Lion in a few weeks time altho given Epson's past history, I'm not very confident.....

  • Unable to Print After Installing Adobe Acrobat Reader Upgrades.

    . What software version of Abobe Acrobat Reader should be used for an HP PhotoSmart Plus printer? I currently have Adobe version  9.3 installed. I receive pop-up notices to install new Adobe Acrobat Reader software upgrades. I have installed the software upgrades and then my HP PhotoSmart Plus printer was unoperational. I deleted the Adobe software upgrades and my HP PhotoSmart Plus printer began to operate. I contacted HP technical support and was told there is no compatibility issues between Adobe Acrobat Reader and HP All-in-One Products. It might be a problem with the specific Adobe software upgrades. HP requested that I contact Adobe support for problem resolution. Has this problem ever happened to you? Any problem resolutions would be appreciated.

    Hello there! Welcome to the forums @Oldchev 
    I understand you cannot print, after installing your Officejet 7410 All in One  printer.
    Please let me know the following, and I'll do my best to help!
    What is the Operating System of the computer?
    Have you tested hardware functionality (made copies)?
    Have you tried printing from different programs?
    Have you tried uninstalling and reinstalling the software?
    What Firewalls and Anti-virus software are installed?
    Have you tried disabling or uninstalling them?
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Unable to print with new installation of Adobe Reader X

    Yesterday I installed Adobe Reader X on my Dell laptop running Windows XP.  After installing, I was unable to print to a HP Laserjet 4700 printer (only printer I tried).  I rebooted my laptop and tried to repair Adobe Reader and I still can't print.  I uninstalled, rebooted, and re-installed Adobe Reader X and it still won't print. When I click on the print button it just locks up with the hour glass symbol running (only locks up Adobe Reader). I have Adobe Acrobat 9 full version on my computer also and it works fine printing the same documents (a newspaper article without graphics) to the same printer.
    Any ideas what could be happening and how to fix it?

    Ditto on Darrenz16's problem.  New WIN7-64 Home Premiun system with Adobe Reader 10.1.2.  Reads several files, then starts locking up when I try opening new files.  Seems like Reader is failing to release some resource and eventually running out of whatever it is.  Rebooting seems to help temporarily.  Never had this problem on previous systems.  A set of good examples are the .pdf files at the bottom of this page:  http://www.hussman.net/weeklyMarketComment.html
    I can open a few, but then Reader locks up trying to download the files.

  • Epson Stylus CX7300 will not print after software update

    After doing the latest update for my Epson Stylus CX7300 printer it will not print.  When i open the printer utility it comes up with a communication error.  I can still scan documents but i can't print or even print a test page, check ink levels etc.

    Hi Kerry Bonney,
    Welcome to the Apple Support Communities!
    If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Have a great day,
    Joe

  • Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

    I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
    The HP software installation process appears to go  normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
    Below are the dialogs and what happens (text is in portuguese but you get the idea)
    Dialog 1: selecting wireless connection mode
    Dialog 2: printer appears in list and I select it
    Dialog 3: Error message is shown, no further details
    Here are some more facts:
    (1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
    (2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
    (3) I've tried uninstalling and reinstalling HP software;
    (4) I've resetted my router;
    (5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
    (6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
    My OS is Windows 7 64 bit Ultimate (Service Pack 1)
    EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
    Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
    Thank you,
    Joao Pedro

    Hi JoaoPedro,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having installation issues.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thank you for your time
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • MAC OS X YOSEMITE WON'T RECOGNIZE MY CANON IP90 PRINTER AFTER SUCCESSFUL INSTALLATION

    I HAVE AN 8 YR OLD CANON IP90 PRINTER WHICH I HAVE SUCCESSFULLY INSTALLED ON MAC BOOK PRO OSX YOSEMITE 10.10.2.
    I'VE TRIED SEVERAL TIMES TO ADD THIS PRINTER BUT IT IS NEVER RECOGNIZED AND SO I'M UNABLE TO PRINT ANYTHING. CAN ANYONE GUIDE ME TO GET THIS SET UP AND PRINT?

    pmiles wrote:
    According to the Canon website, the Yosemite driver for your printer is included with the OS.
    According to Apple's documentation, Canon stopped providing support for this printer (and many others) and for any drivers users should get in touch with manufacturer:
    Printer software no longer available through Software Update
    The third-party vendor no longer provides software for the following models to download and install through Software Update. Contact the vendor or visit their website for further assistance.
    Canon
    (Support site: http://www.canon.com/)
    More info:OS X: Printer and scanner software available for download - Apple Support
    HELPTODD, call Canon tech support and asked them where you can download from a driver for your printer.

  • Unable to print after updating to yosamite

    Like so many I have the same issue after updating to Yosemite. I have tried deleting the printer, updating drivers, resetting the printers, restarting the Macbook Air but all to no avail.  Printer is an HP Laserjet 3055 and has worked fine up until now.  Come on Apple, this is really frustrating!

    Hello there! Welcome to the forums @Oldchev 
    I understand you cannot print, after installing your Officejet 7410 All in One  printer.
    Please let me know the following, and I'll do my best to help!
    What is the Operating System of the computer?
    Have you tested hardware functionality (made copies)?
    Have you tried printing from different programs?
    Have you tried uninstalling and reinstalling the software?
    What Firewalls and Anti-virus software are installed?
    Have you tried disabling or uninstalling them?
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Error 507 after software installation was interrupted

    i was trying to update  OS for my bb8520 when i lost internet connection on my laptop so software installation got interrupted, i tried to reload the software but pc wouldnt recognized the bb, it says hardware not recognized, i took it to 2 technicians to try to get it fix but they both said since software installation was interrupted phone is completely dead and its only good to sell it by pieces, is this true? please help, can this be fixed? and how?? 

    ughhh..no, it can be fixed.
    If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to print after adobe update

    Program says "printer must be installed before printing pdf" but printer is installed, updatd and working properly with other programs.  I did a system restore (windows XP) and was able to print pef but as soon as update re-installed I was unable to print.  Obvious solution is to system retore again and NOT update adobe but is there a better fix?

    Hi,
    I found that Adobe has released an update to Acrobat 9.4.2 for the Print Issue in the form of an EXE. I applied the fix on my system, and it seems to have fixed it.
    You can download the EXE from:
    http://kb2.adobe.com/cps/891/cpsid_89178/attachments/AcrobatPatchApplication.exe
    For more information on the same, please refer:
    http://kb2.adobe.com/cps/891/cpsid_89178.html (Herein, refer to Solution 1)
    Regards
    Ankit

  • Unable to print after installing the new Quicktime upgrade

    I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

    Latigna, welcome to Apple Discussions.
    Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
    Also look at Troubleshooting printing issues in Mac OS X
    http://docs.info.apple.com/article.html?artnum=106714
     Cheers, Tom

  • Unable to print after Apple software updates

    I was able to print wirelessly without any problem until I had last updates. I'm able to print with hardwires, but not able to print wirelessly except Text Edit let me print wirelessly, but Safari or any other apple application don't print including third party applications. I deleted and added printer several times, have updated driver from internet. I have three mac computer at home, they all are working fine. I also ran disk permissions, ran disk utility, still same issue.
    What could be reason, you think, I may need to reinstall my system software (Archive and Install possibly)? Or should I pull out some printer plist files? I need your advice, thanks

    I have exactly the same problem! HELP PLEASE!!
    Thanks

  • Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

    Hello,
    I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
    Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
    Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
    At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
    System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
    Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
    I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
    It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
    How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
    Your help is sincerely appreciated. Thanks.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Unable to restart after software update 10.3.1.1779

    I am unable to get  my Z10 to restart after this update.
    I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
    I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
    It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
    PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.

    This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.

Maybe you are looking for