Unable to print an image full size

Using photoshop elements 12 I cannot get the image to print at the required size, will only print a small image in one corner of print medium.

What happens when you choose to save it as a PDF document from the Print dialog? If the PDF document is subsequently opened in Preview, does it appear as expected? If so, then there's nothing wrong with AppleWorks.

Similar Messages

I'm trying to print from a full size 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer?

I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

You might be better off contacting an AutoCAD support group.

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

How to view images full size and then import selected ones to macbook

I want to view my images stored on external drive full size and download selected to MacBook pro

Use a photo viewer like Preview (this has nothing to do with iPhoto)
LN

Keeping images full size when uploading from "Photos" after editing

Is there any way that I can edit photos in the ”Photos” app and keep what I have edited and also keep them full size when I upload them Flickr?

Highlight the images you wish to export.
Ctrl-Shift-E to open the export dialog.
Change the top drop-down list to Hard Drive.
Choose a location for the files in the Export Location section.
Adjust file naming if necessary.
In the File Settings section make sure you have the correct output format selected and choose a quality (85 is fine for most things and keeps file size manageable).
Make file size changes as appropriate in the Image Sizing section.
If you are downsizing a lot then consider adding some output sharpening.
Click Export.
Hopefully that covers most things.

How can I save a PSD image 'full size' in a PDF doc for printing

I have a Photoshop image we've created that will be taken to the printer for a 3x6 banner. I need to save it as a PDF document, but when I do, it doesn't save as the original size of the image. I'm a total novice, so can someone help me with instructions to creat the PDF with the appropriate size image for the printing company to create the banner?

Seconded! I have a 1039x697 PSD which comes out as a 249x167 PDF! Every time! What am I doing wrong?

Suddenly unable to print in the correct size in photoshop album 3.2 starter

Hi,
I have tried to print out 4X6 photos but despite setting paper sizes etc correctly in settings and printer settings the prog is showing and printing the pic approx 1/2 size and opposite orientAtion (but all of pic).
I have been able to print these before, for ages.
Am using a HP photosmart 8400.
Any ideas?
Thanks in advance,
Rach

Hi Rachel,
Is this occurring in other applications as well or just this one? Have
you noticed any changes on your system?
Cheers

Unable to print images using ENVY 4500 - a red x appears

I am unable to print certain images and instead see a red x where the image should be.
This worked fine for a similar image a month ago.
How can this be resolved?

Hi there, from what type of device are you trying to print the images from e.g. a smartphone/tablet or a PC/laptop?
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How To Print Full Size 8x11 on officejet 6500

I just bought an officejet 6500. I want to print a picture full size. It's 8x10.5in. I select 8x11 paper. Best resolution and all just like I did on my old hp, but when I print, it resizes to 3x5 (my guess). Why is it doing this? How do I get it to stop. This should be simple. The resolution is about 97dpi. Does that have anything to do with it? I printed the same photos the way I wanted on my old printer. If I printed this exact printer on my old printer, it would print full size. And how I get it to use the printer as the default and not the fax. I'm not even using the fax. I have to select the printer every time. I'm on Vista by the way.

It turns out that I can't seem to print the way I want from Photoshop CS3. Other applications seem to print OK. I can print without any issue if I use Corel PhotoPaint. But if I try to use Photoshop, it prints a small picture no matter what setting I seem to pick. Unfortunately I mostly use Photoshop to print. I could print using HP Essentials, but there doesn't appear to be any way to custom size what I want to print in that program.

Unable to scroll down when image is full size in the preview frame.

Since the recent update to Premier Elements I am unable to use the 'down button' on the slider bar to scroll down to the next image when the image is at full size. I am still able to scroll up.

First, check all your relevant System Preferences.
Scroll bar prefs are in Appearance, mouse behaviour is in Keyboard & Mouse, and finally check the settings in Universal Access also.
If all those check out, are you running a 3rd-party utility that might affect mouse / scroll behaviour? Use Activity Monitor to see everything that is running on your machine.

In my Macbook Pro finder folder under All Images, there are duplicate files, but one is small and the other is full size. I wanted to clean up the files, but don't know why I have two of everything. Any Ideas?

In my Macbook Pro, the Finder folder has duplicate images in the 'all images' file. One image is small and the other is full size. First question is why do I have two of every image? Why is one small and the other large. Do I need two of everything? If not, which do I delete?
thanks, Jean

Hello fane,
Re: duplicate images in finder.
Nearly all images are JPG with a few GIF and PNG sprinkled in.
I opened the inspector so I do get info when opening each image, but it a slow process.
It seems that one image is around 70k while its twin can be up to 4Mb which is what comes unedited from my camera. Sometimes there will be 3 or 4 identical images in finder, but when I open iPhoto to see what ‘s really in the file, I find only one image, and it’s full sized.
Are all these extra images, even if they are aliases, taking up space on my drive? And should I delete them? The info bar says I have over 10,000 images, which is rather a lot for what I do.
I am unable to add the file size on the view menu as it is grayed out. Don’t know why it’s gray, but having that info on the screen would save a lot of time and fiddling with each image.
I am trying to resize selected pix so I can upload them to e-bay, which requires less than 70k. I have looked at resizing programs but most are for PC platform and not Mac, so I am trying to resize in the finder window under tools. Tedious at best. Any suggestions will be appreciated
Thanks for your help,
jeanfromwilsonville

Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

How to create ePUB with full size images/pages to adjust according to device?

Friendly Greetings,
        I have been trying, for nigh on two months, to convert/create my 7 books that are in print into eBooks; with first publishing scheduled to be Nook, with Kindle on the eventually list. I am, sadly still working on just getting the first one published! And I could really use any assistance to get this figured out. My intent was to publish several weeks ago...now my desperation is to publish before the weather gets too warm and kids are outside most of the time...or at least no later than Easter. :0)
        First and foremost, my books are picture/poetry books for kids of all ages. They were fully designed in Photoshop, where I also created the full size images for the first eBook. I received the specifications from B&N for the various Nook devices. Under the assumption that it would be best to create the largest of the files, thus allowing smaller sized devices to adjust the page accordingly to fit and the largest would not overstretch a smaller image, I sized my pages to 1280px x 1920px at 72dpi. (now I hear 150 is standard??)
        My text is included within the image as the design is one image = one page. I included a full text only version of the story/poem at the end for those wishing to adjust text or use a voice reader. I obviously have all the original files, but for publishing they were all saved as JPGs.
        After quite a struggle and a whole lot of frustration I managed to complete the manuscript in Barnes and Noble's Nook Press Manuscript Editor. My internet is molasses and thus much of this was done in the wee hours of the morning when the rest of the time zone is asleep. I only had one page with an issue, of an extra blank line/space that was irreparable. I published, and found it was completely botched in publish, though the preview looked a-okay. Only about the top left 1/6 of each image/page was visible in either my laptop's Nook for PC or my Android Tablet's Nook App. So I agonizingly awaited another 10 hours, hoping no one would buy my book during that time, for it to be removed from sale.
        I downloaded a trial of InDesign CC, and after two weeks of not even being able to create a single new document for some screwy reason, I bought a month's subscription. So far I'm not entirely convinced of this whole Creative Cloud malarkey, especially considering...as like I said my internet is slow...it took me nearly 20 hours just download the software. (Is it really that difficult to offer disc, seriously?) After a chat and phone call I can, in theory, now use InDesign.
        I created a New Document for Digital Publishing at the aforementioned specs (1280 x 1920 px). I made the rectangle placeholders the full size of the page, and place one image per page. This usually inserted the image at about 50% and I would have to select 100% and then move as necessary in to place.
        Thus, my first question is: Is there a way to place an image at 100% without having to do that extra resizing step? Or if there is an alternative way to place the image to the full size of the page without any of those other steps that would be lovely too.
        Okay, after placing several pages/images I also selected each and went to Object Export Options and Checking the Custom Rasterization and "Resize to Text Flow". I then exported a trial ePUB to see what it would look like. On both the PC and Tablet in landscape mode it was a far cry better than the other, but about oh a 1/3 of the bottom of each page was cut off. On the tablet I rotated to portrait and voila full page. Woohoo! But alas, I don't want to limit it.
        Is there something I am doing wrong? Did I miss a step or two somewhere so that the full image will fit on the page? I feel like I'm just about to turn the page on this thing, but it's stuck to the one after that.
        I would greatly appreciate any insight, tips, help that anyone can offer. I have run the gauntlet of Barnes and Noble...cough, cough...support and apparently I ask questions which no Nook Press rep can answer and the forums over there have no clue about InDesign. It's almost as if with all the fantastic beautiful screens out there today nobody wants picture books! How does National Geographic do it?!
        Thank you very kindly.
In case it is necessary: My laptop uses Window 7 Pro 64-bit, InDesign CC is 64-bit and my 10.1 tablet uses Android. I can view the EPUB files in Nook for PC and Nook for Android. I also have Kindle, LumiRead, and various other apps on the tablet. I can also have someone preview the finished epub, if need, on a Mac, iPad, and/or Android phone...though I do not have any of these. Not sure who has a Nook I can look at though. Thanks again.

Q: Is there a way to place an image at 100% without having to do that extra resizing step?
I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
1. Create a new doc
2. Goto Object menu and choose Frame fitting options
3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
Regards,
Pooja

Need help with printing graphic full size in trial CS5

I'm using the trial version of photoshop CS5 and am having trouble printing.
My graphic size is 9.4" x 6.3". However, when I print, it comes out as a tiny thumbnail, about 1.25".
How do I get it to print the full size?

The height, width, and resolution are all linked, so change one to get the others. You may not get the exact dimension for both height and width unless you crop, or distort image.
PPI is pixels per inch which is not important for printing, you are more concerned by the printer setting for dpi or dots per inch.

Unable to print an image full size

Similar Messages

Maybe you are looking for