Unable to print barcode in smart forms in zebra 420 printer.
Hi,
Can anyone please help me out with the following issue.
1. I am unable to print the barcode using a zebra barcode printer from SAP. I use C128A format.
2. But this issue doesn't come when I print the same form using a Laser printer. The scanner also detects the same correctly.
3. The same barcode printer prints my earlier forms with the same settings correctly.
May I please know where the issue exactly is?
Regards,
Krishna
Hi,
Please check the size of the barcode in the styles and check ur printer settings.
The paper layout of the printer also needs to be checked.
Regards,
Krishna
Similar Messages
-
Use of NACE after creating print program n smart form
Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
Please help me out.Its urgent.
Thanks & Regards,
Santhosh.Hi Santhosh,
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.
Reward Points if useful.
Thanks. -
How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa -
How to print bullet in smart form
Hi Experts,
I have a requirement in smart form where different points of texts should come under a bullet.
Can you please tell me how to print bullet in smart form.
Note : I have to use Standard text
Thanks in advance
Bikashi
good
We can create bullets in smartforms.
For this change the editor to text editor and then
goto insert->characters->SAP Symbols and select the
symbol you want.
This may help your requirement.
You cannot see the bullets in print preview, it'll
appear only on a hard copy.
reward point if helpful.
thanks
mrutyun^ -
How to Printe Graphics in Smart-Forms
Guys,
Need your help
Is it possible to print graph in smart form???
If yes, if you have any document, please pass it to me
DhirajHi Ram,
Go through this hope u can understand.
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
/: INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Reward points if help ful.
http://www.sap-img.com/ts001.htm
Sorry i think for Scripts ..
better to go for above post . it definetly works
Thanks
Naveen khan
Message was edited by:
Pattan Naveen -
Passing printer name to smart form
Hi,
How to pass more than four characters printer name to smart form function module name. Please help me. I will give points.
Thanks.Hi,
Thanks for your reply but there I can pass maximum four character printer name but my case printer name contains 12 characters. If I pass 12 characters printer name it is considering first four characters and it is displaying printer name is not found. So please tell me how to pass more than four characters printer name.
Thanks. -
Tell me how i can read barcode in smart form
hi all,
pls tell me how i can read the barcode in smart form.
Any body give me some idea.
how i can program to read that.
regards
vikas saini.Hi
if u mean my creating barcode format ..then in smartforms...create a character format.......in that there is a radio button ...barcode select that and select a particular barcode format.
save and activate this character format.
call this character format where u want the barcode .
<c1>it_kna1-kunnr<c1> -
Unable to print graphics using smart forms
Please some one help in printer settings for graphical printing in smart forms.
Instead of graphic it interprits the graphics as a text and prints text.
please urgent...................help mehey no worries I got the answer thank you.
-
Need Help with SSCC-18 Barcode in Smart Forms...
Hi...
Using new Smart Forms barcode...
Need to create a SSCC-18 Serial Container Shipping Code format barcode...
It is currently printing OK as a UCC-128 format... but... when it it is read by a scanner... they say it is missing the SSCC-18 "Start code Start A character and Function code 1"... that identify it as an SSCC-18 format...
Suggestions ?
Thank you,
Dave...Issue is resolved...
In the System Bar Code being used...
...changed the Code128 Mode parameter to a 'U' from an 'A'
The scanner now recognizes the bar code as an SSCC-18 format.
Dave T. -
Hi all,
how to view the print preview of a smart form and how to debug the smart form
Thank YouSMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
For debussing -
1. write BREAK POINT in the code window.
2. Put a break point on the call function in the driver program
3. put a brak point in the generated Function module.
Refer this link too -
Re: smartforms
Regards,
Amit -
How to Print Vertically in Smart Forms
I need to print data in vertical format into columns in smart forms. Can any one give me the solution.
Hi Sreedhar,
In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
Best Regards,
Ram. -
Slow down printing speed for Smart Forms
Hi,
Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
I need that because when I print that smart form to fast I run into print out quality problems.
Many Thankshi,
take print out in a dot matrix printer instead of your laser printer without changing any settings.
Coz i tried this once, i was successfull. But, the printout will be very slow.
regards,
kool. -
How to print barcodes in Adobe forms
Hi All,
I am new to Adobe forms, Please help me how to print barcodes in ABAP using Adobe forms.
Thanks in advance.
Regards,
Satya.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Aug 26, 2011 4:17 PMHi Vanessa,
maybe this blog helps for the tables:
[Adobe Forms Using: Nested Table, Text Module & providing the functionality of Page Total & Grand Total|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0583594050DB11063248235171113529End?blog=/pub/wlg/11236]
and for the barcodes I found this:
[Introduction to barcodes in SAP Interactive Forms by Adobe|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0583594050DB11063248235171113529End?blog=/pub/wlg/13061]
I hope this provides some help for you.
If you are not able to fulfill your task, it is a good idea to check the blogs, wikis and download areas here in SAP Community Network - usually the quality is some quantum leaps better than current ABAP, General.
Regards,
Clemens -
How to create barcode in Smart Forms with MS Word as Editor?
Hi,
I created a character format for a barcode in a smart style.
The problem is that I do not know how to assign it to the text in Smart Form because the Editor is MS Word and not the normal Editor.
Any suggestion or idea.
Thanks & best regards
ViktoriaHi and thanks for the fast reply,
I have created a smartstyle and also a characterformat for the barcode. This is not the problem.
I call the layout via HRFORMS. The Form Builder for Smart Forms is called and the Editor for the text nodes is preset and is the MS Word editor. This cannot be changed. I tried different things also in the settings. The normal text editor cannot be called.
I choose and enter the field that I want to convert into the barcode &wa_barcode&. I do not work with standard texts (SO10). The text field is a normal text node in Smart Forms. The character format that applies converts the number in the variable field into the barcode.
In the MS word editor I have only formats that are in the office environment (arial, ...) I do not see the formats that I created in smartstyle also when I assign it in the output options of the text node.
So maybe I have to work like this for now. Swich between HRFORMS and SMARTFORMS when working with barcodes. In the Smart Forms transaction it is the normal editor where I can see the paragraph/ character formats from smartstyle.
Thanks and best regards
Viktoria -
Hi,
There is a Strange issue I am facing now that is print output is getting changed according to the printer settings.
Even though I specified the output_options-tdprinter = 'ZPDFUC',and output_options-tddest = 'LP01' while calling smart form FM the printer option always takes the printer setting present in user profile.
Is there a solution where the smart form by default picks one printer but not in the User profile settings.
Regards,
DeepaHi,
There is a field check it and set the value X to overwrite the system details with manual settings. when calling the smartforms.
Thanks,
Vinayaka
Maybe you are looking for
-
Sharing one iTunes music and movies folder
Our family iMac is used by 3 people. But I want my brothers to access my iTunes folder instead of having them create their own iTunes playlist and having duplicate songs and taking up space on my iMac. Is there a way for my brothers to access my iTu
-
Multiple threads access the same method.
Hello, I have been trying for a long time to find out multiple threads access the shared data. I have written a sample code, there I my intention is that method has to be accessed onlny one thread at a time., mean one thread finished the job, then ne
-
When I open downloaded software, I get a message "Verifying xxx.pkg" which never stops. What is the problem?
-
Dear Solman experts, I have an issue in CHaRM. When I try to logon the development system through the CRM_UI, i get the message System &1 don't exist, But when i go to the maintenance cycle in the SAP GUI, an perform the action Logon to system it wor
-
Twain-Treiber in Photoshop Elements 12
Habe voller Freude das neue Photoshop Elements 12 installiert und mußte zu meiner Enttäuschung feststellen, dass schon wieder wie bereits bei Elements 10, kein Twaintreiber vorhanden ist. Hatte eigentlich gehofft, dass diese Manko beseitigt wäre, den