Unable to print Click N Ship Labels (USPS) after installing Snow Leopard

I upgraded last week and today was the first time I needed to print a USPS label. Absolutely nothing happens. Normally, Reader opens, displays the label and then the label is printed using Reader.
On the USPS website, their requirements say to use Internet Explorer or Netscape. Prior to upgrading, I was able to print the labels using Safari as my browser.
Does anyone have any suggestions?
Thank you.

After more research and many different suggestions, I finally was able to print the USPS labels. I uninstalled Acrobat Reader and installed Foxfire. When printing the label in Foxfire, the label is downloaded. I then added .pdf to the end of the file, opened in Preview and was able to print.

Similar Messages

Unable to print on HP J6480 after installing Snow Leopard

After installing Snow Leopard I've been unable to print from my HP J6480. I get an error message saying to check for updates from Apple and the manufacturer. Apple shows no more updates. I've added a printer driver v2.6 from Apple, but that hasn't helped. Had no problems printing before this. Any suggestions?

Never mind. Just went to Hewlett Packard site and the suggestion was to reinstall the printer. I did so and it now works. Of course, the reinstall wiped out other printers I had on there....Adding Snow Leopard has resulted in much more work than I thought it would be!

"Inkjet 4 Quit Unexpectedly" error message after installing Snow Leopard, C410 printer

Can't get printer to print after installing Snow Leopard. C410 Photosmart Premium All in One Printer. Keeps saying "Inkjet 4 Quit Unexpectedly". Wireless test says everything is fine.

If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Download and install this: support.apple.com/kb/DL907
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
Finally, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I am unable to load webpages after installing snow leopard

I am currently typing this on my iPhone. After installing snow leopard this morning I am unable to connect to either safari or Firefox. Both come up with server errors and will not load the webpages. The Internet is still connected over wifi and I am able to both send and receive emails. I am Oma MacBook running the Internet on an at home wifi connection. Please help!

Why are you posting this in the Mountain Lion forum?

After installing Snow Leopard my wireless printer won't work

I installed Snow Leopard now my HP wireless printer won't print.

I suggest you check the properties of the printer in control panel and make sure the IP of the port matches what the IP address is allocated to printer by the hub, sounds like a miss match somewhere
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

LaserJet printer no longer works after installing Snow Leopard

Since installing Snow Leopard, my LaserJet printer no longer works. Spent 5 hours on the phone to Apple Support without any satisfaction. Any suggestions? I'm desperate.......

Go to the HP web site and download the latest drivers for your OfficeJet.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919449#N225

After installing Snow Leopard, Word for Mac X document prints only top 1/3. Excel, PDF is fine...only word is a problem.

Installed Snow Leopard and later in week went to print out a full page word document (Word for Mac X) and it only printed top 1/3 of page. Checked with PDF and Excel documents and all printed out OK. TextEdit is fine in printing as well. Then created a new document with a sentence on top of page and a sentence on bottom - printed fine.
Any suggestions would be appreciated.

Since your problem is only w/a Microsoft product, you should contact Microsoft for Mac Support and/or post in their forums.

Epson Stylus Photo 1290 does not print after installing Snow Leopard

Hello.
I have this silly problem of having an old very good printer, and a very new system. Since my update the printer simply wont print. It gives me a "communication error". Printer Utility is working though ! I can check ink settings, clean the printing heads, but when printing the test page, which is completely EMPTY.
The Printer Utility taks AGES by the way, to do anything i want. VERY slow.
Oh, and yes, i also installed Gutenberg printer drivers additionally,
printing works there, but it is ooooooddly slooooow as well, **** it !!
Any ideas ? Thank you !!
Message was edited by: maringorama

btw, this is how i got to know about the "resetting printer queue" - OFFICIAL EPSON ANSWER:
(sorry for German speaking users only ...)
Bitte gehen Sie in diesem Fall wie folgt vor.
1. Löschen Sie alle Epson Drucker aus der Druckerliste.
2. Deinstallieren Sie den Treiber über die Installationsroutine. Besteht diese Möglichkeit nicht gehen Sie bitte direkt zu Punkt 3.
3. Löschen Sie den Inhalt des Ordners "Epson" unter HDD -> Library -> Printers.
4. Suchen Sie im Finder nach Druckermodell und löschen gefundene Einträge.
5. Starten Sie Ihren Mac neu.
6. Laden Sie den aktuellen Treiber von unserer Website und installieren Sie diesen. http://esupport.epson-europe.com/de-DE
7. Schließen Sie den Drucker direkt am Mac an, Kabellänge <= 2m. Sollte der Drucker im folgenden nicht gefunden werden schließen Sie ihn bitte per USB und nicht per FireWire oder Netzwerkkabel an. Verwenden Sie keinen USB-Hub und nicht den USB-Port an der Tastatur.
8. Drucker hinzufügen:
8.1 Power PC 10.x.x
Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen (unter Tiger 10.4.x dann weitere Drucker) und wählen die korrespondierende EPSON-Schnittstelle (Epson-USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
8.2 Mac-Intel 10.4.x
Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen und wählen die korrespondierende EPSON-Schnittstelle (USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
8.3 Leopard 10.5.x
Gehen Sie in Drucker & Faxe, wählen Sie hinzufügen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
8.4 Snow Leopard 10.6.x
Gehen Sie in Drucker & Faxe, wählen Sie das "+" Zeichen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk oder per Epson Firewire hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
Beim Update von 10.4 oder 10.5 auf 10.6 empfehlen wir das Drucksystem zurückzusetzen und dann die Treiber neu zu installieren. Dieses Verfahren kann auch beim bei Punkt 1 benutzt werden. Allerdings sind dann alle Drucker gelöscht!
Falls Sie noch weitere Fragen, Wünsche oder Äußerungen haben, stehen wir Ihnen gerne zur Verfügung.
Mit freundlichen Grüßen,
EPSON Deutschland

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

TS3626 Mac os x 10.4.11 unable to install snow leopard

I couldn't install osx snow leopard family pack in to my Mac osx 10.4.11?? I've tried many times. It's start installing aswell but after 10 to 15 minutes it's stops with the error says couldn't install on your computer.. The installer could not copy the necessary files.click restart to restart your computer and try installing again.
I have a intel core 2 duo processor, speed 2ghz memory 1 gb..
Please help me solve this problem.

I suggest the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Boot From The Snow Leopard Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Quit DU and return to the installer. Install Snow Leopard.
E. For updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it will start to install, then once it gets about 1/4 of the way done my computer restarts and it spits the disk back out.

I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it starts, but when its about 1/4 of the way done the computer restarts and my disk spits back out. When I look to see if it installed it still says 10.5.8. Is there something I'm doing wrong?

Model Name: iMac
Model Identifier: iMac6.1
Processor Name: Intel Core 2 Duo
I bought the Mac OS X Snow Leopard Install DVD from the Apple Store.

Can't print to pdf since I installed Snow Leopard.

I make newspaper ads all the time in Illustrator CS4 on a Mac.
I always print them to pdf files. Never had any trouble doing this.
However, since I installed Snow Leopard I can not print to pdfs.
I go through the usual motions and then... just nothing happens.
Are there known issues with AI CS4 and Snow Leopard?

I was having the same problem. Basically, you now have to "save as" then "to PDF" to get the same results. Although this new method give you more choices in terms of output, i.e. saving layers, image resolution, it has also produced larger PDF files. I will then have to open the document in Acrobat and "reduce file size". I do wish they would bring back the print to PDF option. Go to the link below to read more. If you figure out how to produce the same results and get the small files sizes back please share.
http://blogs.adobe.com/jnack/files/Adobe-SnowLeopard_FAQ.pdf

UNABLE TO OPEN FCP 6.02 PROJECT FILES AFTER INSTALLING LEOPARD!

**Unable to open FCP 6.02 project files after installing Leopard**. Tested and found that the files can be opened on another computer with OS 10.4.10, but not OS 10.5. Spoke to apple support many times, and have tried reinstalling FCP, but it didn't work.
Apple is now saying to erase my HD and reinstall from scratch. This presents a problem since i have software installed but no disc due to a move, (they are deep in offsite storage).
Anyone have this problem? Anyone know a fix?

Lynne,
There is a section in the manual on the migration tool... I don't have my machine fired up right now so can't direct you to the exact page. I think a search for migration or migrate should do it.
Two other things to try:
1. There have been numerous reports that Quicktime 7.3 is what is killing older projects. According to one of the third party program makers Apple re-wrote Quicktime changing the null value to Zero from minus-one. I'm not a code junkie so can't vouch for this but the upshot would be, go back to Quicktime 7.1 or 7.2 not 7.3
2. There is a Quicktime plugin called "Perian". For lots of people it has caused numerous problems.
Look for Perian on your machine and if you find it, drag the app to the trash... re boot and try again.
Of course the ultimate solution would be to reinstall Tiger, Final Cut Studio 2 and Quicktime 7.2. So far the most stable combined setup for me and lots of others on G5 machines.
36 degrees and thunderstorms with sleet here this afternoon. The door on my storage unit is staying closed.
Message was edited by: John Criswell

Officejet 8000 - Printer says out of ink even after installing new ink cart. and new head.

My Officejet 8000 - Printer says "out of ink even after installing new ink cart. and new print head. I have tried two new cart. and still gives me the error. A few times it will show all inks are full and print a page or two then says it is out of ink. At one point I even was able to clean the heads and align them but same thing occurs. What is wrong??

Hi Lee_S
Try printing a Self Test Page and see what the Cartridge status & Printhead status is like.
Printing a self test page
Please let me know how you get on..
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

So, I've taken my panasonic printer back to the shop and exchenged it for a Canon MF-4430. Alas... the generic drivers do not make it print. Is it possible to get drivers to make this canon printer work with my lovely Mac Book Pro Snow Leopard, 6.8?

I could not find a MF-4430 at the Canon site. Are you sure the model is correct? They have a MF4450. The Mac drivers are here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf4450#DriversAndSoftware
If you are sure you have a MF4430, look around the canon site for the drivers.

Unable to print Click N Ship Labels (USPS) after installing Snow Leopard

Similar Messages

Maybe you are looking for