Unable to Print Drill down pages

Hi,
We are using Crystal RDC to view & print reports in our Power Builder application. When we try to print a drilled down page, it is not priniting that page alone. It is printing from page 1. We are using Crystal ActiveX Report Viewer Control 11.0 in the window.
Can anyone help me to print drill down page alone please?
Thanks in Advance,
R Ganesan
Edited by: vssatish on Feb 14, 2011 10:33 AM

Similar Messages

Unable to print a web page in color hp officejet 6500a plus

unable to print a web page in color hp officejet 6500a plus
This question was solved.
View Solution.

Hi daverunlong,
I'll need some addtional information to assist, are you using ePrint or the ePrint Mobile app? What device do you have?
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Drill-down page from table

I've created a table by dragging a Named Criteria of a View Object over. However, the table is quite packed because there are many fields, hence many columns. I want to show only a few columns, and make a drill-down page, in a way that I can click on any row and go to a page that displays the remaining fields for that row. How can I achieve that? I'm using JDeveloper 11.1.2.2.0.

Hi,
1. Select the page in the Application Navigator
2. Expand the table in the Structure Window
3. Delete the columns you don't want to see
4. Create a second page (or use a popup dialog)
5. Drag and drop the same View Object as a table or form
6. keep all columns or delete some
7. Add a command link to the table on page 1
8. Set the action property to match a navigation case you defined between page1 and page2
This is all it takes. The command link, whe added into a column to the table ensures the row is selected
Another option is to configure column freeze on the table. This way you can fix the columns that people always need to see and then allow them to use a horizontal scrollbar to scroll into the other
Frank

First Page is Table and drill down page is chart

Hi All,
In my dashboard i should display only table. In table, if i select one drill down values. It should display only chart not for table formate.
How to set this option.
First page it sholuld be table
Drill down page should be chart
How will do this.
Thanks

Hi,
Create two reports one with table and other with chart in compound layout view.Place Table in one page and to to column properties->data format->value interaction->navigation->select chart report that you created under column through which you want to navigate to chart.Make that column as prompted in chart if you want to filter data based on column selected.
Regards,
Srikanth
http://bintelligencegroup.wordpress.com/

Conditional display of headings based on drill-down page or section shown

<div>Crystal Reports 10</div><div>I have a report (originally written by someone else) with 1 drill down page.</div><div>The drill down shows section group footer 2.</div><div>I am adding a new drill down from the 1st drill down. This will show the details section.</div><div>There are headings which are displayed in the page header section.</div><div>I would like to suppress or hide these headings when the 2nd drill down page (details section) is shown.</div><div>I figured I could do it based on whether a section, or a field within a section, is displayed on the page or not.</div><div>How to accomplish this?</div>

Thanks for asking this question.Â
There is a formatting function (under the Document Properties group of functions) called GroupLevel().Â It returns what level ofÂ group you're on.Â You can use this along with the SuppressÂ conditional format to show/hide a section based on where the user is located.Â Â
This would be a great one to "show" as a sample.Â I'll add it to my task list for submissions up here.Â
Again, thanks for asking the question and start the ball rolling!
Â Â Â Â Â - Kathryn Webster (Report Design Specialist)

Unable To Print or Access Page Setup in Crystal Reports 2008

I have Win 7 32 bit, and installed Crystal Reports 2008 last week (v12.0.0.683 from the Help window).
Every time I open a report, and from the Preview tab clicking File -> Print, or File - > Page Setup, I immediately receive a Windows message that "Crystal Reports has stopped working". After a few seconds, another Windows message displays "Crystal Reports has stopped working - a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". Then Crystal completely closes.
I downloaded sample reports from the BO website, and still receive the error, so I don't think it's the report.
When I view the Event Log, I see the following:
Faulting application name: crw32.exe, version: 12.0.0.683, time stamp: 0x47c8be9a
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
Exception code: 0xc0000374
Fault offset: 0x000c283b
Faulting process id: 0x94
Faulting application start time: 0x01cc1fc304e98ecd
Faulting application path: C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 3cfc99e6-8bb8-11e0-b8ef-00248122792c
I have uninstalled and reinstalled CR 2008 multiple times and continue to receive the same error. I tried updating to SP1 (Version 12.1.0.892 Incremental) but I receive the following error: "A BusinessObjects product at a lower patch level is detected. The installation cannot continue. Please update all installed products to the SP1 patch level, then restart this installation".
Need to print my reports - any ideas?

Sorry busy on Support cases and they take precedence over this community forum.
Very interesting....
In a test application I use I have this routine to get the local printers:
private void frmMain_Load(object sender, System.EventArgs e)
     if (System.Drawing.Printing.PrinterSettings.InstalledPrinters.Count > 0)
          foreach(String myPrinter in System.Drawing.Printing.PrinterSettings.InstalledPrinters )
               cboCurrentPrinters.Items.Add(myPrinter);
          cboCurrentPrinters.SelectedIndex = 0;
     else
          rdoCurrent.Enabled = false;
          EnableDisableCurrentControls(false);
     //For printers exposed to System account as per MS Kbase
     //http://support.microsoft.com/default.aspx?scid=kb;en-us;184291
     //Look to HKEY_USERS\.Default\Software\Microsoft\Windows NT\CurrentVersion\Devices
     Microsoft.Win32.RegistryKey mySystemPrinters =
          Microsoft.Win32.Registry.Users.OpenSubKey(@".DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Devices");
     foreach (String defaultPrinters in mySystemPrinters.GetValueNames())
          cboDefaultPrinters.Items.Add(defaultPrinters);
     if (cboDefaultPrinters.Items.Count > 0)
          cboDefaultPrinters.SelectedIndex = 0;
     else
          rdoDefault.Enabled = false;
Note the MS Kabse on where the printer registry is. Now the odd part is on one of my test development PC's it won't populate the Default User Printer list, only the Local User Printers. I take this same app to another PC and it works just fine. The register keys are there but for some reason on my Windows 7 64 bit it won't show them, the other strange part is I have full access to both keys. I have not been able to figure out why this happens...
I'm thinking this may be related to your issue.... But I don't have a solution, very strange... I've even gone into regedit32 and set full permissions on the various keys and it still doesn't work...
I have other VM-ware images if I need to get past that part for testing so I never drilled into why, I believe it has to be some Windows/Firewall/Anti-virus configuration or something our IT department pushed into my local Profile.... What that is I don't know unfortunately.
I'll do some looking and testing. You may want to post this on Microsoft forums as well.... Ask about printer permissions.
Thanks
Don

Unable to utilize Drill-Down for all Filtered Dates in Xcelsius Engage 2008

Iu2019m very new to the Xcelsius Engage 2008 product and donu2019t understand what is needed to correct the drill-down problem encountered in a newly created dashboard.
The issue is with Drill-Down from a filtered chart. For some reason, I am unable to correctly pick any data item from the chart located top of workspace to drill-down to the lower chart when selecting a month beyond Jan u201911.
Iu2019ve unhidden the Label Based Menu, List Box 1 and List Box 2 during attempt to find out why I am unable to drill-down when I select a month other than Jan u201911. As youu2019ll see, when you u2018manuallyu2019 click in the unhidden List Box 2, the bottom chart is displaying the correct data.
Also - new to post for this forum - is there a way to attached the XLF to help with visual support to the problem?
Thank you,
Deborah

Hi there and welcome.
First troubleshooting step is to add a spreadsheet component to your canvas so you can watch what's happening. Second, have a look at this step-by-step to make sure you're not missing any steps. http://blog.davidg.com.au/2011/04/xcelsius-interactivity-chart-drill-down.html
Can you select only Jan '11? Or only up to Jan '11? Are you selecting whole months or days?
Assuming that your second chart is filtering for this date, I would check that the formatting is correct. Try, for example, removing all formatting so that you're seeing 40668 instead of a date. Does that work?
Also, it can be helpful to post your version number. This can be found under Help > About Xcelsius and will something like 5.3.5.0

I am unable to print all the pages of an e-mail attachment-only the firsthalf page

I have an e-mail with an attachment that I need to print in full.
I am unable to print morethan the first half page

hello,
Are you able to see the full content when you click 'File" > 'Print Preview'? Please also try enabling 'Print background (colors & images)' in 'File' > 'Page Setup...' if it is disabled.

Unable to print to oversize pages using Adobe FrameMaker 9 \ 7.2 and Distiller 9.0

I am trying to print to PDF a publication that is full of oversize wiring diagrams from Adobe FrameMaker 9 and 7.2 with Distiller 9.0. The pages are all text and images ranging in size from standard A3 and A4 size sheets through to a foldout being 1470 mm W X 297 mm H. We have no problem printing A3, A4 and 630 mm W X 297 H. These are all Portrait images. When we set up our custom print size to accomodate the 1470 mm W X 297 mm H we get the pages without the content, and even some of the oversize pages are not the correct size on print.
The page sizes we are using are:
A4 (This is all good)
A3 (This is all good)
630 x 297 mm (This is all good)
840 x 297 mm (Problems from here on)
1050 x 297 mm
1260 x 297 mm
1470 x 297 mm
The procedures we are using to set up the printing are:
1. Print to PDF (Also tried save to PDF)
Under Print Setup make sure you select PDF Driver and select the Paper size as largest that is in your book. Example: If A4 and A3 pages, print to A3
2. Select Generate Acrobat Data and select
See attached Screen shots for the settings we are using:
Note: Back in FM Print dialogue; make sure Print to File is turned OFF, before you click Print
Any assistance would be greatly appreciated.
Regards
AJ Wilkinson

Create a specific FM file having a custom page size appropriate to each unique "content set".
Create a FM Book file.
Add the FM files.
Work up configuration (Hypertext, Cross-References, autonumbering, variables, etc.) as desired.
In Print Setup -
Set page size to the page size of the largest FM file in the Book.
(you may have to go into the Adobe Printer and add one or more custom page sizes so the page size needed is available)
Set orientation to landscape if any FM files are such.
Idea is, if needed, FM files for the content in the various page size/orientation that is appropriate to the content.
If that means 1FM file of custom size and appropriate orientation then do it.
Book files can deal with it.
Back to Page Setup.
Do the Page Size & Orientation.
Access 'Propertires' - is the Distiller job option selected the one you want/need?
Create one if need be so that it is available.
Go into the Print Book dialog.
Configure as needed (remember Acrobat data links, etc. &, oh yes, back in FM be happy with the configurations under tabs for PDF Setup).
Print the Book.
Use Distiller to take to output *.ps to *.pdf (may want the use a "watched folder")
Output PDF can/will reflect the the different page sizes and page orientations.
n.b., FM-Acobat-Distiller releases have a "sync band".
It is discussed somewhere in some kb articles.
I'm not sure if FM7.2 functions quite right with Distiller 9.
FM 8 will (&, of course FM 9)
I've had no problems with FM7.2 or FM8 and Distiller 8.
Be well...

Unable to print certain website pages

I am having problems printing the "printable version" of a website using Safari. The same website pages will print sing firefox, but for some reason it always misses the 2nd of 3 pages.

Hi mmagee1, and a warm welcome to the forums!
What happens if you hit Command+p instead, or Command+p then PDF>Save as PDF, does either of hose work? What shows in the resulting PDF?

Drill Down Report issues in VS 2010, CR viewer 12

We are using VS 2010, Crystal Reports 12 with Crystal Viewer 12 control called from a C# programmed page frame. Several Drill Down reports are developed with CR 12 service pack 1 and then deployed onto the server.
These Drill Down reports work great within the viewer. But Two critical issues have been discovered,
1.     With the drop down report, the next /last page buttons work on the main page, but it doesnu2019t work on any of the drill drop sections.
2.     The print / export functions work on the main page. Using the print / export functions from the Drilled down pages reverts back to the main page, not the drill down page that is being viewed.
Has anyone else seen these issues and know of a fix. Wondering if it might be something in the viewer settings within the .net or the version of viewer ?
I have viewed the CR .Net API Reference but probably due to lack of .net knowledge, seems overwhelming to me.
Thanks

Hello,
Hope you can use this code to export report in pdf with the drill down options/nodes.
CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
   /// Calling a sample report named Employee Sales.rpt with parameter
   rd.Load(Application.StartupPath + \\..\\..\\Employee Sales.rpt);
   rd.SetParameterValue("Login Name","Robert King");
   ISCDReportClientDocument rcd = rd.ReportClientDocument;
   ISCRPDFExportFormatOptions exportFormat = new PDFExportFormatOptionsClass();
   exportFormat.CreateBookmarksFromGroupTree = true;
   //Create an array of bytes of the report.
   PrintOutputController rasPrintOutputController;
   rasPrintOutputController = rcd.PrintOutputController;
   // Define the export format as PDF, and apply the PDF export options
   CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptions expOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.ExportOptionsClass();
   expOpts.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatPDF;
   expOpts.FormatOptions = exportFormat;
   // Use the PrintOutputController class to export the report based on the defined export options.
   ByteArray tempByteArray = rcd.PrintOutputController.ExportEx(expOpts);
   Byte[] byteStreamOutput = tempByteArray.ByteArray;
   // Create a new file(MyExportedReport) with the specified path, name, and file extension.
   FileStream fs = new FileStream("C:\\Windows\\Temp\\MyExportedReport.pdf", FileMode.Create, FileAccess.ReadWrite);
   // Stream the bytes from the exported report to the newly created file and close the file stream.
   int maxSize = byteStreamOutput.Length;
   fs.Write(byteStreamOutput, 0, maxSize);
   fs.Close();
   MessageBox.Show("Export is done in C:\\Windows\\Temp location");
Thanks.

OfficeJet 2620 Unable to print

I am unable to print to OfficeJet 2620. I am able to scan. I have installed printdoctor, which recommened I uninstall and reinstall software, which I did, and this did not work. I am unable to print a test page, but the printer will print an internal test page. ??Please help.

Hi @edwa87372
Although you have already tried uninstalling and reinstalling, please try the following steps to perform a more comprehensive uninstall;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please let me know the outcome of your efforts, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Unable to print on hp 1320 even after installing upd

I am unable to print (even test pages) to my printer. I've tried installing the upd and after days of working on it, was finally able to print. But I'm finding that it won't print again today.
I also notice that there are 2 printers installed. One is called HP Universal Printing PCL5 and the other is hp Laserjet 1320 series UPD PCL5. I'm not sure which of the two printers I should focus on. I was able to get the latter to print but now am unable to get either to print. It is connected to a netgear router.
This question was solved.
View Solution.

Hi,
Please follow the steps in the link below to solve the issue :
http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=410622&docId=emr_na-c00026681&docLocale=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Group Charts in drill down

Post Author: deltaXI
CA Forum: General Feedback
Hi i am pretty new in CR. I have a report which is grouped in 5 levels. ie.when we view the report we get the higher level view then you have to drill down to each of the levels. the grouping and drill down is working perfectly.I need to insert charts in the drilled down pages. but wherever i insert the charts [i tried putting it in group headers and footers] it gets shown on the very first page of the report without drilling down. I want it to be shown only when drilled down Please helpThanks in advance

Hi Ricky.....
Chart waise Graphical Representation is given by SAP and it can be easily done in XCelcius.
All you need to do is you have to create your own report and put this report in XCelcius.
It is recently launched.....
Regards,
Rahul

Sort control does not show in drill down ?

I have a sort control attached to a column header in one of my report and it works fine. However it does not show up in the drill down sections. Is there a way to fix that ?
Thanks

I am sorry if my question was not clear of i am misunderstanding your solution.
My sort control shows up in the grouped data but does not show up in the drill down page after drilling down. what can i do for the sort control to show up in the drilled down page

Unable to Print Drill down pages

Similar Messages

Maybe you are looking for