Unable to print envelopes with latest HP driver for LaserJet 4

In April I downloaded the latest HP drivers for my HP LaserJet 4 to reinstall following work on my computer.
First I was just unable to print envelopes.
I redownloaded and had same results
I have uninstalled and re-installed a number of times.
I tried a "chat" with HP that went nowhere.
I was on hold for over an hour last night -- only to be told that I should email a request for assistance. Fat Chance! Try it!
I still have the manual from when it was new. It had no answer except a Customer Service phone number which has long been shut down.
The present condition is that I am unable to print anything.
Customer Service is a sick myth.

Hello, DP Photo, sounds like a scanning issue with the software. To start I want you to completely remove the software and then reinstall the programming from the packages available on the website I am going to link you to below. Use the full-feature software if available.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3974279
Try that and let me know how it goes!
-Spencer
PS I hope you are having a wonderful day!

Similar Messages

UNABLE TO PRINT ENVELOPES WITH HP 309a

i have an HP 309a printer and I suddenly cannot print envelopes. I have the correct size in the template but when I put the envelope (correctly) into the printer I get an error message "wrong size." This happened recently and I suspect it might be connected with the updates. I can still print labels so nothing is changed there.

Thank you. I'm sorry that it took so long to respond but my brand new G4's logic board failed and had to be replaced! Now when I tried to log in with my username and password at the CUPS local host site, it said that the login was wrong, Do I have to go someplace else to log into CUPs and get a new password and username?
I will try to find out what CUPS is while I wait for your response.
The printers: Lexmark 1100 series is on the Lexmark site: http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:0:0:0 where I got the driver.
Thanks again,
Vusumuzi Zulu

Unable to print colors with my photo ink hp348 on HP C3180

Hi,
I've been using HP C3180 for several years now, mostly to print pictures and scan. I have always used original HP ink. Few months ago my scanner stopped working, however it was successfully repaired in the HP service. I dont know if this is related, however since that time I'm unable to print colors with my photo ink 348...
First of all - when I put only the photo ink into the printer, I get the 'e' error message and the 'check color ink' as well as 'copy' buttons are blinking on the device.
When I put the color ink with my photo ink into the device they stop to blink and the 'e error message' dissappears- however the colors are being printed from the color ink, not from the photo one - which makes a huge difference - but Im sure you know that.
I used to print with this printer in the past with only the photo ink inside, and it was printing colorful pictures, and I did not get any error messages, with one ink inside..
Please help me fix this issue
also - I do have the option to print in color ticked - so this is not the case
it looks like the printer does not recognize the photo ink and it treats it as a black ink.....(but I can assure that it is the photo ink)...

Hi,
Seems like you have issue with the photo ink cartridge. Try to call HP support for potential replacement.
Hope it helps
While I am an HP employee, I am not a expert on all our products. If I offer advice, I'm not speaking for HP on how to solve an issue, but I'll do my personal best to help you.Was your question answered? Mark it as an Accepted Solution! See a great post? Give it a Kudos!

Latest Nvidia Driver for G560 does not install!

Hi,
i've tried to install the latest nvidia driver for my G560. But it seems like the only driver working on this system is the preinstalled driver from Lenovo.
I always get the message that the driver can't find the required hardware. I've downloaded the correct (Win 7 64 Bit) and latest driver from Nvidias webpage. I've even tried some older drivers from the drivers archive.
Does anybody have a clue how I can solve my problem?
Greetings Cpk83
Solved!
Go to Solution.

It does look like the correct driver. But I noticed this "Note: The following notebooks are not supported in this release: 1. Notebooks supporting Hybrid Power with Intel chipsets. 2. Fujitsu notebooks – support will be added in a later release. Fujitsu Siemens (FSC) notebooks are supported in this release. 3. Sony VAIO notebooks – support will be added in a later release. Sony VAIO Windows 7 users can click here for driver update support. 4. Any notebook that is launched after the release date of this driver. " Does anyone know if this laptop has Hybrid Power? Also here is a good tip/recommended from ATI. "Advisory: The display driver supplied by the laptop manufacturer is customized for the built-in flat panel display, and the graphics features and functions specific to the laptop. It is strongly recommended to use the supplied drivers. If installing a different operating system other than the one included with the laptop, the laptop may not meet all the requirements, and supported drivers may not be available. The laptop manufacturer is the exclusive provider of driver updates. If the required driver update is not available at the laptop manufacturers’ website, it is recommended to contact the manufacturer directly, to see if an updated driver will be made available in the future."
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Performance problems using WLS6.1 with the thin driver for Ora9i from OTN

Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

I had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

Canon iR1025if is printing garbage with latest driver. What am I doing wrong?

I have an iMac with OS X 10.9 installed on release day (10/22). Ever since I upgraded I am not able to print "perfect" PDF files from Preview or Skim. Files generated using LaTeX and some special fonts print "garbage" or blanks with a Canon iR1025if.
The printer was working fine under 10.8 and the (then) latest Canon driver. After I upgraded to 10.9, I kept getting errors when I tried to print something, so I uninstalled printer and old driver, installed new driver, and reinstalled the printer (following directions found here in the Apple Support Cummunities). I could then print again, but every time I use some different (math) fonts, such as Arev Sans, it either prints garbage, boxes or blanks instead of the text. See the picture attached. When the PDF is printed under Adobe Acrobat Reader, it comes out exactly as on screen.
Notice that the same PDF on screen is correct, while the printed version is full of garbage. Other fonts generate similar problems.
Any ideas how to fix this? I'd appreciate any help.
malu

Hello MLO_BR,
It looks like you are getting some anomolies when printing from these programs, and mulitple fonts are affected. I would recommend the troubleshooting found in this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Windows Server 2008 driver for LaserJet 4100 with envelope printer

I have a new Windows 2008 Server 32 and a handful of HP printers. I need a driver for the LaserJet 4100 with an envelope feeder. The universal driver doesn't appear to recognize (or give an option to find) the envelope feeder. The old drivers I used on the previous server won't install on the 2008 box.
I can;t be the only person with an envelope feeder on this machine. Can anyone help or point me in the right direction?
Thanks
Jeff

I'm afraid I'll have to refer you to the Business Support Forums for further help. They're more well-versed with Laserjet printers.
Business Support Forums
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Getting unknown error when printing with latest version(using HP Laserjet 1200). I can't print at all using this version. Able to print previously.

I ceased to be able to print when the latest version of FireFox was
downloaded. I can print from the same websites using I. E.
My printer is a HP Laserjet 1200 series. I only get the error(an unknown error occurred while printing) when trying to print through FireFox. I can print email fine and any other instance as long as I'm not going through FireFox.

Hello Josh,
We are using a couple of EFI (Fiery) controllers with our Canon copiers and I have been told by Canon support that we need to be using the MacTel (Universal Binary) versions of drivers for Leopard. Luckily for us we have mostly new models of RIPs and the UB drivers exist for these models, but I know that they are not available for all models, which I believe includes your X3e.
To determine if you have a driver or RIP issue, you could save the file as either PS or PDF and then use the EFI utilities, such as Command Workstation, to import the file to the RIP (select Process and Hold) and then see if you can print your multiple copies that way. If that works then you know that the RIP is probably okay.
The next test would be to create a generic PS queue to the X3e and print using this queue. If this works then you can narrow your issue down to the driver.
PaHu

Trouble with latest NVIDIA driver

Hi!
I just bought an NVIDIA card (9600GT) to replace my AMD Radeon HD 3650.
I installed the latest NVIDIA driver (180.22-1), and X now fails to start:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux zeus 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 19:41:52 UTC 2009 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 23 19:41:58 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
/usr/bin/X: symbol lookup error: /usr/lib/xorg/modules/extensions//libglx.so: undefined symbol: _nv000002gl
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
I've tried reinstalling xorg-server, libdrm nvidia, nvidia-utils and so on, but nothing helps.
Has anyone else experienced this issue?

I had the same problem My solution was ... After reinstalling every thing 3 times with no good results I decided to try one more time on a 64 bit version of it and it worked perfectly so I decided to try different distributions with 386 486 and 686 all the same problem.. it seems only the 64 bit distributions work well with the newest Nvidia cards.... Can't find a reason and Nvidia has not answer me yet....
Sorry but if you want your card working on Linux you will need to upgrade to 64 bit it seems.
also there is no Wine HQ for 64 bit under Arch other distros have but if you want it under Arch you will have to build it your self.
OK if some else knows better Please Please Let me Know the secret ... I tried 10 distros and 60 installations later I had these results, maybe I'm doing it all wrong.
PS:
I do a lot of beta testings Just for fun. Testing Jaunty and Windows 7 at this time and 7 is pretty but it stills Sucks Majorly Just as much as Vista does.
Jaunty Has no drivers for Nvidia and is no way to Install it manually with the idiot user proof thing that they got I'll be going back to Arch today and give it a rest to my frustrations For a While....

Problems printing envelopes with HP 4480 all in one

I purchased the HP 4480 all in one because I was told it would do the job(we hold a reunion each year and write to over 110 people. However I have had nothing but trouble (30 envelopes wasted already) it jams-jams-jams) sometimes at the back and sometimes at the front lots of messy hands!! Have now started to write the envelopes which defeats the whole idea of speed. Can any one help or shall I bin the printer not a year old yet.

I've had the very same issues with printing envelopes. I'm using standard #10 envelopes, so it should not be an issue. I have a new 4480 printer coming today to replace the one I have, but I am not encouraged about what will happen since I see at least another person has had the same issue.....we"ll see what happens...

Unable to print or use external hard drives via Airport Extreme

Hi.
I installed Airport Extreme with no problems. Airport utility program shows everything is ok, and shows my printer (Canon LBP5100) and my two external hard drives which are connected to Airport via USB-hub.
My airport extreme is connected to ADSL-router and is providing another WLAN in my house. The internet connection works fine, but I couldn't print nor use my hard drives. I installed the printer using the bonjour guided printer installation tool.
I haven't heard that my printer would not be compatible with airport extreme so was my airport purchase totally unnecessary or what tricks should I use to make the printer and the external hard drives be available?
Sincerely,
Jarkko
Finland

Hi.
Thank you for your reply. No help though.
Printer gives me this warning:
The network cable is not connected, or the printer is not turned on. Check these items.
And still the hard drives are not visible anywhere.

(Workaround-ed) Xorg crashes on logout with latest nVidia driver

I can enter a DE through the login just fine after a clean startup or a reboot. It's just that after I logout using Ctrl Alt Backspace, it just keeps crashing and won't bring me to the login screen again.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Tue Nov 4 17:18:57 PST 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "thinkpad60"
Option "XkbLayout" "dvorak,us"
#Option "XkbVariant" "dvorak,us"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "true"
Option "NoLogo" "true"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by zephyrus17 (2008-12-30 13:54:11)

My xorg looks like this
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux proxima-centauri 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 30 08:30:30 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation Quadro FX 570M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.82 Tue Nov 4 17:15:47 PST 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 177.82 Tue Nov 4 16:56:15 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0; nvidia-auto-select +0+0; 1680x1050 +0+0"
(**) NVIDIA(0): Option "DPI" "110x110"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro FX 570M (G84GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.51.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro FX 570M at PCI:1:0:0:
(--) NVIDIA(0): IBM (DFP-0)
(--) NVIDIA(0): IBM (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): IBM (DFP-0): Internal Dual Link LVDS
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0): HorizSync range (53.246-63.877 kHz) would exclude this
(WW) NVIDIA(0): mode's HorizSync (42.6 kHz); ignoring HorizSync check for
(WW) NVIDIA(0): mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0): VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0): mode's VertRefresh (40.0 Hz); ignoring VertRefresh check
(WW) NVIDIA(0): for mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0): HorizSync range (53.246-63.877 kHz) would exclude this
(WW) NVIDIA(0): mode's HorizSync (42.6 kHz); ignoring HorizSync check for
(WW) NVIDIA(0): mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0): VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0): mode's VertRefresh (40.0 Hz); ignoring VertRefresh check
(WW) NVIDIA(0): for mode "1680x1050".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1680x1050_60+0+0"
(II) NVIDIA(0): "nvidia-auto-select+0+0"
(II) NVIDIA(0): "1680x1050+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(**) NVIDIA(0): DPI set to (110, 110); computed from "DPI" X config option
(WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
(WW) NVIDIA(0): UBB.
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event9"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) ThinkPad Extra Buttons: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) ThinkPad Extra Buttons: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) ThinkPad Extra Buttons: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Tue Dec 30 08:30:54 2008: 2936 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3026 )
AUDIT: Tue Dec 30 08:30:54 2008: 2936 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3027 )
AUDIT: Tue Dec 30 08:30:54 2008: 2936 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3028 )

How can I print envelopes with Pages with my ipad2?

How may I print envelopes from my ipad2. I do have Pages .

Hi dd,
Pages '09 offered two types of documents.
Word processing documents included a text layer, and consisted of sections made up of multiple pages. If no section breaks were inserted, a fifty page document could consist of a single section. Text could be placed directly into the text layer, and Objects could be placed on the page as Floating Objects, independent of the text, and able to make text flow around themselves, or could be placed as Inline Objects, inserted into the line of text running from beginning to end of the document, and moving with the text as it was edited.
In a Page Layout document, each page was a single section. There was no text layer, so only objects could be placed on the page. Any text had to be contained in a Text box or in a Shape. Unless grouped, each object was independent of the others.
Changing your images from Floating to Inline objects may be the key to your document rearranging issues. They can be changed back to Floating after being moved to theor new locations.
Regards,
Barry

Any need for inactive memory with latest SSD drives?

I have an iMac with a combo drive with 24 gb of RAM. At times my inactive memory exceeds 10 gb and my available memory goes to zero. And Mavericks is slow to give the memory back. Given the efficiency and speed of the latest SSD drives, does earmaking memory to an inactive state serve any useful purpose when using a SSD drive?.

I believe there is, as RAM speed is still much better than SSD speed. Most inactive RAM queries stem from the fact that "inactive RAM" is a misnomer. For a pretty full explanation, have a look at my second-last reply at the bottom of page 3 of this discussion:
https://discussions.apple.com/thread/6058988?start=30&tstart=0
Hope it helps

I am unable to print envelopes

I can't print # 10 envelopes. I hae never had this problem before. I am using the same software that has always worked. I have two printers HP 6988 and HP 6540. I have this problem with both.
Billie

I was using MS Word 2013. I was using the "Mailings" ribbon>"Envelopes" option to try to print envelopes. For some reason it just wouldn't work. I was unsuccessful at trying to print that way. I was finally able to print envelopes after downloading a few different templates. When you click new document, it allows you to select from some generic templates or download more templates. This is where I downloaded the templates.

Unable to print envelopes with latest HP driver for LaserJet 4

Similar Messages

Maybe you are looking for