Unable to print from Acrobat 9.0

I am trying to print to an inkjet printer from Adobe Acrobat 9.0. I am printing from a MAC which is running OSX 10.5.8 to an Epson 3800. I am using paper which is 12.5in x19in. I choose my paper 13inx19in using page setup. When I hit print the paper moves about half way down the paper and begins printing eliminting most of the images that I want to print. I have checked everything carefully and my printer seems to be setup correctly. Does anyone have any suggestions? Thank you for your help, Mary Pat McNally

As Mike says upgrade to 9.1.3
If that doesn't resolve issue go to site of Printer Manufacturer and see if there is a updated Print Driver.
If there is, do the following:
Quit acrobat.
Download Driver
Open Printer Utility
Remove current listing for printer
Quit Printer Utility
open Driver File and install.
Go back to Printer Utility and ask it to locate new printer.
When your printer Pops up immediately make it the default Printer
Quit Printer Utility
Open system Preferences
open Printer/Fax Control panel
Set you printer as default there as well. Quit preferences
Now open Acrobat and set up printer (Page setup)
You might have to go to Custom Printer size at bottom of List
if so set height and width as desired.
Save this custom setup with a name.
Now go to document and choose Print/
Choose you custom set up if you wre not able to preset a listed size.
Now try printing Document.

Similar Messages

Unable to print from acrobat 8 standard

I've installed Acrobat 8 standard in my computer and when I go to print I get an error message, "Unable to start print job. Is Printer available?". However, when I open the same pdf file in Acrobat reader 10, it will print. My computer is using Windows 7 version.

Acrobat 8 is three versions out-of-date and does not officially support Windows 7. Acrobat 8 is also no longer supported by Adobe.
- Dov

Solution to the problem printing from Acrobat 9.4.2

Since there are nearly 200 posts in the original thread, It might be best (for those looking for a quick solution) to do this in a new thread.
The problem is that you cannot print to a network printer from Acrobat (pro) 9.4.2. Printing to a local (USB) printer seems okay.
The solution (for us) was found at http://www.hypersensory.com/content/fix-printing-after-installing-adobe-acrobat-942-update
The approach I tested was:
[T]he fast and easy way:
1.) go to the installation directory of Acrobat (C:\Program Files\Adobe\Acrobat 9.0\Acrobat)
2.) Look for the file "Adobe.Acrobat.Dependencies.manifest"
3.) Open it and delete the line <file name="atl.dll" />
4.) Reboot your machine after saving that file
This should fix the issue of being unable to print PDF file after installing 9.4.2 update for Adobe Acrobat.
With thanks to the folks at HyperSensory.com! It works!

Could someone from Adobe respond to this specific issue so that we know we are being heard? Will the fix for the print issue also resolve the 'attach to email' problem? Is there any work around other than telling users to attach directly from their email programs?
Thanks in advance for your response to our concerns.
Penny

PDFs not printing from Acrobat Reader 7.0.8

PDF don't print from Acrobat Reader 7.0.8. The same PDFs print from Preview. I've tried many PDF from various sources (over a dozen including those created on my Mac) in every case they print fro Preview and not from Reader.
I'm currently on OS 10.4.7 but This has been an issue for some time and I believe was the case with Reader 7.0.7.

FIXED!
Priner Setup Utility/Reset Printing System
Then added priner again.
Interesting that the only issue was printing from Acrobat Reader and that this fixed it. Probably deleted and "rewrote" whatever file was at issue.
Something regarding cups?
See cups error_log involved Reset Printing System
I [02/Jul/2006:01:44:11 -0400] Listening to 7f000001:631
I [02/Jul/2006:01:44:11 -0400] Listening to 300a80:0
I [02/Jul/2006:01:44:11 -0400] Loaded configuration file "/private/etc/cups/cupsd.conf"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/certs"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/ppd"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/cupsd.conf"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/var/spool/cups"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/var/spool/cups/tmp"
I [02/Jul/2006:01:44:11 -0400] Configured for up to 100 clients.
I [02/Jul/2006:01:44:11 -0400] Allowing up to 100 client connections per host.
I [02/Jul/2006:01:44:11 -0400] Full reload is required.
E [02/Jul/2006:01:44:11 -0400] LoadAllPrinters: Unable to open /private/etc/cups/printers.conf - No such file or directory
E [02/Jul/2006:01:44:11 -0400] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
I [02/Jul/2006:01:44:11 -0400] Full reload complete.
E [02/Jul/2006:01:44:11 -0400] getprinterattrs: resource name '/printers/StylusPhotoR200' no good!
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 device-uri to "file:///dev/null" (was "file:/dev/null".)
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 printer-is-accepting-jobs to 1 (was 0.)
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 printer-state to 3 (was 5.)
E [02/Jul/2006:01:44:46 -0400] Unable to backup printers.conf - No such file or directory
I [02/Jul/2006:01:44:46 -0400] Saving printers.conf...
I [02/Jul/2006:01:44:46 -0400] New printer 'StylusPhotoR200' added by ''.
I [02/Jul/2006:01:45:14 -0400] Adding start banner page "none" to job 1.
I [02/Jul/2006:01:45:14 -0400] Adding end banner page "none" to job 1.
I [02/Jul/2006:01:45:14 -0400] Job 1 queued on 'StylusPhotoR200' by 'cseeman'.
I [02/Jul/2006:01:45:14 -0400] Started filter /usr/libexec/cups/filter/pictwpstops (PID 627) for job 1.
I [02/Jul/2006:01:45:14 -0400] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 628) for job 1.
I [02/Jul/2006:01:45:14 -0400] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 629) for job 1.

I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters

I am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters

Start up in safe mode
http://support.apple.com/kb/PH4373   <<< click here.
Restore your computer’s software
http://support.apple.com/kb/PH3840   <<< click here.
http://www.apple.com/buy/locator/   <<< click here.

HT4356 unable to print from my ipad mini

unable to print from ipad1 or ipad mini. tried all suggestions in support. This problem has been highlighted before is there a a problem with an software upgrade. I have hp 5510 that works fine fromPC.

I rebooted my BT router, Switched printer off and on, Checked printer on same wifi as router. closed ipad wifi to forget this network and reselected.
Printer worked OK on my ipad1 up until a few months ago it has never worked on my new ipad mini. works from my PC.

Faded colors when printing from Acrobat - different than previous

Hi
I have read some threads about color fading when printing a PDF created in ID and printed from Acrobat. My problem is the same and I am also having the same problem with PDF's exported from Keynote (client created posters). It sounds like I should work with the PDF optimizer for the solution. Has anyone experienced the fading colors from anything other than ID or Quark made PDF's? Did the optimizer fix the problem? I find it frustrating that I can print directly from ID and not have a problem - why can't they all get along! ;0)
Using Acrobat 9, Keynote 09 and an Epson 9880 printer.
Thanks

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?

Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
Windows XP, all updates installed.

Hi,
One thing to slow it down: low ink. Please check ink cartridges and replace if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't Print from Acrobat 9 Pro on windows 7 64bit....

I have a windows 7 64-bit computer that can't print to any printer from Acrobat 9 Pro. When you try to print I get the following error:
"print driver host for 32 bit application has stopped working"
Any thoughts, it's driving me crazy....

I'm having the identical problem and the only way I can get it to work is by not trying to change the title suggested by Acrobat for the PDF.
If I try printing from Firefox and pasting in a new PDF title, it crashes Firefox.

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

Unable to print from HP Laserjet P1102 after upgrading to Mavericks

Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

I am using reader 11.0.10.32 Win7 64 bit. I am unable to print from Reader. After selecting print all pages, the pri

I am using reader 11.0.10.32 in Win7 Professional 64 bit. I am unable to print from Reader. After selecting print all pages, the progress bar goes through the proper page count. After that a pop up window appears with the message: The document could not be printed. After pressing the OK button that pop up closes and the next pop up window appears with the message: There were no pages selected to print. After pressing the OK button, the pop up closes and the pdf document is still visible in Reader.
I can print from other programs to that printer. I can print from Reader to other printers.
I was able to print to all printers before. I uninstalled Reader and reinstalled it from the Adobe web site.
Any suggestions to make it print?
Thanks.

Answered multiple times every day: open Adobe Reader | Edit | Preferences
under Documents, change 'View documents in PDF/A mode' to Never
under Security (Enhanced), disable Protected Mode at startup

Same as Source Printing from Acrobat 9

Hello Everyone,
I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavior in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
-Original PDF file
Raster RGB - 191,45,47
Here are the numbers that are submitted by Acrobat, captured by our RIP:
-Acrobat 7 Same As Source
Raster RGB - 191,45,47
-Acrobat 7 Printer/Postscript Color Management
Raster CMYK- 0,244,245,0
-Acrobat 9 Same As Source
Raster CMYK - 0,242,251,0
-Acrobat 9 Printer/Postscript Color Management
Raster CMYK - 0,242,251,0
-Acrobat 9 Acrobat Color Management
Raster CMYK - 17,248,245,1
So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
(This is also posted to the Color Management forum, as it is both a color management concern generally, and an issue specificly related to Acrobat.)
Matt

We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
1. The file sizes differs, which suggests that there is a difference right off the bat.
2. The printed artwork differs visually, which is troublesome.
3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
a.       Acrobat 7
i.      RGB – Line 3342
ii.      CMYK – Line 3400
b.       Acrobat 9
i.      RGB – Line 8406
ii.      CMYK – Line 8468
4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
Matt

Can't Duplex print from Acrobat Pro 9.3.2 to Epson Artisan 800

I can not duplex Print from Acrobat Pro 9.3.2 to an Epson Artisan 800.
I an running it from a MacBook Pro with OSX 10.6.3
I called Epson support and they could not help me.
However they suggested that I try using Adobe Reader.
Well that works OK if I choose to print the document as an image, but I would prefer to just be able to work within Acrobat Pro.
Does anyone outthere have any settings within Acrobat Pro that would enable duplex printing?
Thanks
Dunc

All this is totally different Screen (I use a HP DJ 990cse) This sort amplifies Larry's Answer:
Every Printer is setup naturally different.

Unable to print from Acrobat 9.0

Similar Messages

Maybe you are looking for