Unable to print from HQ to Branch through the VPN tunnel between ASAs

We have site to site VPN configured between ASAs. The VPN tunnel is up and running as desired except for one printer in the subnet. the users in the Hq cannot print in the branch office printer. I have allowed the ip protocols for the printer subnet but still it is not working. When I do a packet trac the traffic for the printer is allwed through the tunnel.
Can anyone suggest what can be preventing from printing?

When other printers in the same subnet can be reached, I would first control the IP-settings of the printer. In my experience it's most likely a wrong subnet-mask or gateway.

Similar Messages

  • Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?

    Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
    I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
    Windows XP, all updates installed.

    Hi,
    One thing to slow it down: low ink. Please check ink cartridges and replace if required.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I improve performance over a Branch Office IPsec vpn tunnel between and SA540 and an SA520

    Hello,
    I just deployed one Cisco SA540 and three SA520s.
    The SA540 is at the Main Site.
    The three SA520s are the the spoke sites.
    Main Site:
    Downstream Speed: 32 Mbps
    Upstream Speed: 9.4 Mbps
    Spoke Site#1:
    Downstream Speed: 3.6 Mbps
    Upstream Speed: 7.2 Mbps (yes, the US is faster than the DS at the time the speed test was taken).
    The SA tunnels are "Established"
    I see packets being tranmsitted and received.
    Pinging across the tunnel has an average speed of 32 ms (which is good).
    DNS resolves names to ip addresses flawlessly and quickly across the Inter-network.
    But it takes from 10 to 15 minutes to log on to the domain from the Spoke Site#1 to the Main Site across the vpn tunnel.
    It takes about 15 minutes to print across the vpn tunnel.
    The remedy this, we have implemented Terminal Services across the Internet.
    Printing takes about 1 minute over the Terminal Service Connection, while it takes about 15 minutes over the VPN.
    Logging on to the network takes about 10 minutes over the vpn tunnel.
    Using an LOB application takes about 2 minutes per transaction across the vpn tunnel; it takes seconds using Terminal Services.
    I have used ASAs before in other implementation without any issues at all.
    I am wondering if I replaced the SAs with ASAs, that they may fix my problem.
    I wanted to go Small Business Pro, to take advantage of the promotions and because I am a Select Certified Partner, but from my experience, these SA vpn tunnels are unuseable.
    I opened a case with Small Business Support on Friday evening, but they couldnt even figure out how to rename an IKE Policy Name (I figured out that you had to delete the IKE Policy; you cannot rename them once they are created).
    Maybe the night weekend shift has a skeleton crew, and the best engineers are available at that time or something....i dont know.
    I just know that my experience with the Cisco TAC has been great for the last 10 years.
    My short experience with the Cisco Small Business Support Center has not been as great at all.
    Bottom Line:
    I am going to open another case with the Day Shift tomorrow and see if they can find a way to speed things up.
    Now this is not just happening between the Main Site and Spoke Site #1 above. It is also happeninng between the Main Site and Spoke #2 (I think Spoke#2 has a Download Speed of about 3Mbps and and Upload Speed of about 0.5 Mbps.
    Please help.
    I would hate to dismiss SA5xx series without making sure it is not just a simple configuration setting.

    Hi Anthony,
    I agree!.  My partner wants to just replace the SA5xxs with ASAs, as we have never had problems with ASA vpn performance.
    But I want to know WHY this is happening too.
    I will definitely run a sniffer trace to see what is happening.
    Here are some other things I have learned from the Cisco Small Business Support Center (except for Item 1 which I learned from you!)
    1.  Upgrade the SA540 at the Main Site to 2.1.45.
    2a. For cable connections, use the standard MTU of 1500 bytes.
    2.b For DSL, use the following command to determine the largets MTU that will be sent without packet fragmentation:
    ping -f -l packetsize
    Perform the items below to see if this increases performance:
    I was told by the Cisco Small Business Support Center that setting up a Manual Policy is not recommended; I am not sure why they stated this.
    3a. Lower the IKE encryption algorithm from "AES-128" to DES.
    3b. Lower the IKE authentication algorithm to MD5
    3c. Also do the above for the VPN Policy
    Any input is welcome!

  • Which packets go through the VPN tunnel

    Guys,
    I've just added a external server ip address to go through our vpn tunnel and then out the remote site internet connection.
    How can I check that this is the path the packet is taking?
    If I do a tracert then I can't see the path?
    Thanks

    Well, you could either monitor your logs on your VPN device (whatever that may be - not specified), as long as you have the appropriate logging level. 
    For a traceroute, assuming there's a routing device on the other end of the tunnel you would traverse, you should be able to see the last hop on your end being your VPN device, and then the router or the destination host, as the next hop (and that would indicate you're 'in' the tunnel).
    A third option, and more challenging, is having a packet sniffer that knows the PSK, or has the ability to decrypt the session, and analyze the traffic from Wireshark or another packet analysis tool.
    HTH!
    -Chris

  • How to redirect Internet traffic from RV082 to RV042 through a VPN Tunnel??

    Fellows,
    We have offices in USA and Venezuela.
    In our USA office we have a RV042 router and in Venezuela we have a RV082 router.
    We have connected a VPN tunnel (gateway-to-gateway) between both offices.
    The point is:
    How   could we redirect the internet traffic from our Venezuela office   (RV082) to the USA Office (RV042) to navigate using USA public IP's?
    The   reason for this is that we need to use online streaming services which   are only available for IP's from USA and we can't use them from the   Venezuelan IP's.
    We  can not use the PPTP option since the  equipment which will use the  streaming services (like hulu, crackle,  etc.) in Venezuela is a Google  TV device which doesn't allow the  configuration of proxy navegation or  PPTP VPN connections itself. That's  the reason why we need to do that  through the routers.
    We will really appreciate your support on this matter.
    Daniel

    Hi Daniel, this is called ESP wildcard forwarding which the router does support.
    https://supportforums.cisco.com/docs/DOC-12534   <- This is older but applicable
    https://supportforums.cisco.com/message/3766661
    -Tom
    Please mark answered for helpful posts

  • I am using reader 11.0.10.32 Win7 64 bit.  I am unable to print from Reader.  After selecting print all pages, the pri

    I am using reader 11.0.10.32 in Win7 Professional 64 bit.  I am unable to print from Reader.  After selecting print all pages, the progress bar goes through the proper page count. After that a pop up window appears with the message: The document could not be printed.  After pressing the OK button that pop up closes and the next pop up window appears with the message: There were no pages selected to print.  After pressing the OK button, the pop up closes and the pdf document is still visible in Reader.
    I can print from other programs to that printer.  I can print from Reader to other printers.
    I was able to print to all printers before.  I uninstalled Reader and reinstalled it from the Adobe web site.
    Any suggestions to make it print?
    Thanks.

    Answered multiple times every day: open Adobe Reader | Edit | Preferences
    under Documents, change 'View documents in PDF/A mode' to Never
    under Security (Enhanced), disable Protected Mode at startup

  • I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters

    I  am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters

    Start up in safe mode
    http://support.apple.com/kb/PH4373   <<< click here.
    Restore your computer’s software
    http://support.apple.com/kb/PH3840   <<< click here.
    http://www.apple.com/buy/locator/   <<< click here.

  • HT4356 unable to print from my ipad mini

    unable to print from ipad1 or ipad mini.  tried all suggestions in support.  This problem has been highlighted before is there a a problem with an software upgrade.  I have hp 5510 that works fine fromPC.

    I rebooted my BT router,  Switched printer off and on, Checked printer on same wifi as router.  closed ipad wifi to forget this network and reselected. 
    Printer worked OK on my ipad1 up until a few months ago it has never worked on my new ipad mini.  works from my PC.

  • Unable to print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

    Hi there! I was wondering if you could help me with this case.
    Old computer: Mac G4  (purchased in 2002)
    Old OS: OS 10.4.11  (Tiger)
    CPU: Dual 1.25 GHz
    Memory: 2 RAM
    Software: Photoshop 7
    Hardware: Large format printer: Epson 11880 (64” wide monster). Prints large posters, banners, etc.
    As you can see, it is time for an upgrade...
    New computer: iMac
    New OS: OS 10.6.3  (Snow Leopard)
    Processor Name: Intel Core i7
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 4
    Memory: 16 GB
    Software: Photoshop CS4
    Hardware: Large format printer: Epson 11880
    Situation: We hooked up everything and managed to print on the 11880 printer 2 times and printed two large format prints. On the third attempt, we encountered a serious problem...
    Problem: After opening a file in Photoshop and sending it out for printing in the large format Epson printer, the file goes to the printer queue and stays there for 6 seconds, and then it disappears. It does not print. :-(
    What we have done so far:
    We made sure we downloaded the latest printer driver for this printer from Epson’s website.
    The printer driver is correct. The computer talks to the printer and we are able to execute all the commands from the printer utilities panel. (i.e. check ink levels, clean heads, etc.)
    And yes, the printer is okay, because we have been using it with the old G4 machine for about a year.
    This problem got so frustrating, that we thought that something we transferred during the computer installation might be the culprit. So at one point we erased the hard drive on the new computer and reinstalled the operating system, and have not put any files from any old computers into this machine. The computer has nothing else in it. Except: The operating systems, and the Mac applications that come when the Mac comes out of the box. The only other program installed in it is Photoshop CS4 and the printer driver.
    We were wondering if this was just a printing problem, period. So we added a small printer to the computer - and old Epson 2200 we have. We sent a file to this printer and there is not problem.
    Perhaps, the file size might have been an issue? It does not matter. We can send a large 60 MB file to the printer or a small photograph measuring only 8 x 10, and these will linger in the queue for 6 seconds, and disappear never to be printed.
    Temporary relief came when we got rid of Adobe Photoshop’s Preferences file. After getting rid of the file and allowing Photoshop to reconstruct it, we managed to print two large files on the printer. Then it failed again. Tried getting rid of the preferences again, and the trick did not work anymore. :-(
    Another temporary relief came when we created another user in the computer. On the new user account it printed again a couple of times only to fail later.
    And yes, the printer WILL print from other Mac programs. If for instance, we open a file on Preview, and send it to the printer and the file will be printed. And yes, we have managed to print very large files with this method.
    In the last couple of days, we have spent 3 hours on the phone with the guys at Epson. They verified the driver and because the computer seems to be communicating with the printer and printing from other Mac applications, they suspected that the problem is with Adobe.
    We called Adobe once, and spent 30 minutes with an Indian fellow who concluded that the problem was with how the computer handles the spooling. According to him, Photoshop sends the file to the computer and the computer seems to get rid of it. So he passed the buck and told us that the problem was with Apple.
    We called Apple and spoke for 30 minutes with a friendly technician, who transferred us to a higher level techno-geek. I spent 1 more hour on the phone with Apple, and we tried everything. We went through Adobe’s knowledgebase and tried every suggested solution (see Adobe’s KB406452). It was with him that we found a temporary fix of removing the Preferences file, but the solution was short lived. He finally thought the problem was with Adobe as the printer is able to print from all applications EXCEPT Adobe Photoshop.
    We called Adobe for the second time...and after waiting on hold from 1 entire hour, we got an Indian technician, that bless his heart, had a very thick accent and had no expertise, in my opinion. He was good at collecting data and he even made me share my computer screen so that he could troubleshoot the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the buck and said that it was Apple’s problem. I just told him that it was not as likely because all programs print EXCEPT Photoshop. After trying what I would consider a “hail Mary” of DELETING all the printers from my Library folder, and not replacing them, he recorded a case number for another Adobe technician to call us in a few days.
    Because the above technician completely blew the Library, I just erased and reinstalled the OS. This time, I did not allow the OS to be updated - from 10.6.2 (that comes in the box), to 10.6.3. We tried printing using the 10.6.2 and had the same problem. :-(
    Conclusion: I think it is a problem of Adobe CS4 not getting along with Apple’s new operating system. The Epson printer is doing fine, because it has been a product that has been in the market for almost 3 years. What is disappointing is that none of the companies wants to man up and say that it is a problem and that they are willing to work on it. Instead they pass the buck to the next company.
    I can’t believe I am the only person experiencing this. Has anyone had this problem, and have you found a solution or workaround for it?

    Dear Doyle, John and Gator Soup,
    Thank you for your kind replies to my problem.
    PS is assigned 70% RAM. In fact, I have never had so much RAM in my life. Files open at lightning fast speed! :-)  We have never considered a RIP as we do not have an intense workload. In fact all the files we have tried to print print well on our old G4 with Tiger and Photoshop 7, which at the moment has saved our butt. However it would be nice to get the new faster machine with Photoshop CS4 to talk to the Epson 11880.
    Yes, we are printing directly to the printer. We have hooked up the computer via a 6 ft USB cable to the unit.
    The specs and pixel dimensions of a typical file we print are:
    Type of file: tif  (in this case it is an RGB file) // However, we avoid any color management from the computer or the printer when printing it at this time.
    File size: 60 MB
    Pixel size: 6796 x 3100
    Print size: 34" x 16" @ 200 dpi
    I have not tried saving it as a pdf yet. Will try that next.
    I did go to the Console on the Mac though, and recorded its activity between 5:14 pm - 5:19 pm when I tried to print a file.
    Remember, the symptoms are:  We send a file to the printer...The file goes to the printer queue, and it lingers there for 6 seconds. The file then disappears.
    Although there is a cryptic message of "invalid colorspace" in the log, I don't believe that the file is corrupt. First because we have tried several files, second because smaller versions of these can be printed in another Epson 2200 printer, and third because the large format images can still be printed using our old G4 machine with Tiger and Photoshop 7.
    This might provide me with extra ammunition for when I call both Adobe and Apple on Monday. Apple has been quite good on customer support - particularly when they upgrade you to higher level geeks. ;-)   Do you have any idea I what time I should call Adobe so that I can get people on the western hemisphere to answer the phone? It seems that after a certain time they start speaking with an Indian accent over there.
    Enclosed, for whatever is worth, is the Console's log:
    5/15/10 5:14:46 PM System Preferences[2947] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types:  dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found.  Did find:
    /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
    5/15/10 5:14:46 PM [0x0-0xf00f0].com.apple.systempreferences[2947] System Preferences: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
    5/15/10 5:14:46 PM System Preferences[2947] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4b00880: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14390: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14410: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14490: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:08 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] file://localhost/Applications/Adobe                   P
    5/15/10 5:19:34 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Sat May 15 17:19:34 Norm-Nielsens-iMac.local Adobe Photoshop CS4[2991] <Error>: CGImageCreate: invalid image colorspace: NULL.

  • Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

    I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2.  Every time I try to perform a Test print I get an Error msg.  I'm using driver version 1.3.0.261

    https://discussions.apple.com/message/23765195#23765195

  • Unable to print from HP Laserjet P1102 after upgrading to Mavericks

    Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

    plz try to download the following set of drivers from the link below :::\
    http://gimp-print.sourceforge.net/MacOSX.php3
    This is a new set of default drivers and mayhelp u in resolving the issue.
    Plz do run disk first aid after installing the driver....might suggest even before installaing.
    Thanx !! for trying.

  • Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

    Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

    Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
    "Something is wrong
    We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
    Same message if I cut and paste the link.

  • I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

    I have been unable to print from FF to Brother HL-1440. print generate pages w/odd bits of text from the page, and sometimes one image. If I want to print off the web, I have to print PDF. Older versions of FF print fine.

    I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
    with OpenOffice in the future regarding that.

  • Users are unable to print from Adobe Reader X

    Hi,
    Multiple users in our environment report that they are unable to print from Adobe Reader X. They receive the following error messages (translated from Dutch) Document cannot be printed. There are no pages selected.
    We are using Reader version 10.1.3
    What we have tried to resolve the issue (without any positive results):
    - Repair the installation of Adobe Reader.
    - Update Adobe Reader to the latest version for Vista (x86) (10.1.7)
    - Created new user profile for the affected users.
    The documents can be printed without any errors from Foxit Reader.
    At the moment we use the following workaround:
    Open the document in Internet Explorer, and then print the document from there.
    Does anyone have any idea how we can resolve this?
    Best regards,
    Duncan

    James,
    I'm sorry to hear that you were having the same problem under 9.5.  I had recently updated to Adobe Reader 10 under Windows 7 and yesterday my "default printer" simply disappeared from the options on my control panel.  I re-installed my printer, but today whenever I would open a PDF document and try to print it, the document would simply close with no further ado.  After a bit of trial and error, I ended up uninstalling Adobe Reader 10 and going back to Adobe Reader 9.5.  Now everything is working just fine. 
    nlncmjd

  • I'm unable to print from illustrator running os x mavericks

    Why can't I print from illustrator? I don't have a problem from other apps. just illustrator. I downloaded new drivers for both of my printers an HP Deskjet D1600 and an Epson Stylus Photo 1400. Anyone know of a fix? This first happened when I upgraded to OS X Mavericks. I got a fix and everything worked. Then I installed a Silhouette Cameo (vinyl cutter machine) now I can't print from Illustrator again. Anyone have any ideas or a fix?

    Never mind. Found the fix. These got reinstalled and need to be removed. Ugh!
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/en.lproj[Hard Drive]/Library/Printers/PPDs/contents/Resources/It.lproj[Hard Drive]/Library/Printers/PPDs/contents/Resources/Ja.lproj[Hard Drive]/Library/Printers/PPDs/contents/Resources/ko.lproj[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj[Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj
    I am unable to print from Illustrator CS3 since downloading os x Mavericks 

Maybe you are looking for