Unable to print from my laptop using the wireless connection..

I have configured my HP 3540 series as Wireless printer. The diagnostic tools can detect the printer wirelessly on my laptop and a test page is being printed out without issues. However, when I try to print a document from the same laptop I am unable to get it printed.
I am sure the printer IP is getting detected on the laptop and is configured properly.
What else can I check to resolve this issue.
Note: I get the same issue if I connect the printer through the USB cable provided.

Hello naveen8549,
Welcome to the HP Forums.
I see that you are having some printing issues.
I suggest that we start off by running the HP Print and Scan Doctor. Let me know if you see any error codes or messages.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

Is possible for me to use the wireless connection from my Macbook Pro

Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

Yes. Just use internet sharing on your MacBook Pro.

Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

+Sorry for my English, is not my native language.+
Hi,
I expose my problem:
I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
Laptop configuration:
* Windows 7 Ultimate 64 bits (with all updates installed).
* All drivers updated properly.
* With the latest version of BIOS.
Router:
* Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
Configuration of router:
* WPA2-PSK AES.
* 802.11n
* Maximum output power.
* Channel: 11 (not automatic, this channel is relatively free).
* Channel width: 40 Mhz.
* Maximum tx rate: 300 Mbps.
Other information:
* The wireless card drivers are correctly then updated (ver. 5.60.48.35).
* The router has updated firmware.
* I have tried all settings of the wireless card.
* Bluetooth off (without interferences).
* {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
Thanks in advance,
Greetings.
Message was edited by: Xibalba

Hi buddy,
> I kept O.S. original for a week and the problem was the same
If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
Furthermore ask the manufacture of your router if they know something about this.
In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
Good luck! :)

I recently upgraded my internet service with Comcast for faster internet. When I user ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why?

I recently upgraded my internet service with Comcast for faster internet. When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why is the speed so different and are there settings I can change to increase the wireless speed?

If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
Diagnosing network issues

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

TS2634 I cannot print from my ipad. The wireless is connected, I have no trouble printing from my computer. When the ipad looks for the printer it comes back with the message. "Air printer not found" What can I do to correct this? P S Ipad2 is only 1 mont

I cannot print from my ipad. It is connected to the wireless okay. I have only had this ipad for a month and while I am not sure I think it has been okay to print before 2 days ago, when I tried to print and I got the message "Airprinter not found" Has anyone experienced this and if so what did you do about it? I have no trouble printing from my computer.

... Has anyone experienced this and if so what did you do about it?
I rebooted my Airport Extreme.
Try rebooting your router. Make sure its firmware is updated.

How do I get my printer to print a photo from my laptop using the photopaper

How do I get my hp6510 to print a picture from my laptop and selecting the right paper to do so

Hello numero,
You may want to view this article tree:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=18896&tmp_task=useCategory&cc=us&dlc...
There are two articles on printing photos, one for Mac, one for Windows.
Select the one that applies and there should be a guide within that will help you with printing these photos.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

New oj5745 won't print from dell laptop using Windows 10

New HP OJ5745 won't print from laptop using Windows 10. Set up is wireless. Norton firewall shutoff during set up. Uninstalled all HP products and reinstalled new printer program. Printer acknowledges connection to wireless network. Printer shows up as default device on laptop. When print command is sent, the printer indicates whirling circle but no results. Bought printer yesterday. Should I return it?

Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet 5745 on your Windows 10 PC, and I am happy to help! To verify the printer's hardware is functioning, are you able to make copies from the scanner glass? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series. Have you completed the hardware setup before trying to print from the computer? As shown in this guide, Set Up an HP ENVY 7640, Officejet 5740, or Officejet 8040 e-All-in-One Printer. If you are able to make copies, and completed the hardware setup, then try the steps within this guide, 'Offline' Printer Status Message Displays (Windows 10), and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Unable to print from a Mac using Maverick 10.9.2 on an Epson Photo printer with Photoshop CS4. Can you help?

I am trying to print in Photoshop CS4 on an Epson Photo printer (3880) from my Mac. I just upgraded to Maverick 10.9.2 when the problem started. Can you help.

I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
I hope this helps.

I cannot print from a website using the "print" button nor going to "file" "print preview" (nothing there to preview) then "'print" - nothing prints.

I cannot print from any wetsite as there is no print button. I have tried using the printer icon, also file, print preview then print. Nothing to preview nothing printed. How do I print from a website?????

If this is similar to problems I sometimes have printing -- 1) Only happens on some, not all, websites 2) Printer preview window comes up OK, just shows a blank page -- I can suggest a work around, if not a solution: try turning your page into a PDF. Either install an extension which gives a "Save as...PDF" menu option, or a PDF printer driver (I use bullzip). The problem seems to be with the manner the websites use frames and/or javascript. This work around also handles websites that can't get along with your printer settings and chop off edges.

HP Photosmart c309 and printing from Vista laptop on wired/wireless network

Ok going to be as thorough at possible here.
Its a brand new HP Photosmart c309 which I received this past Weds, so far so good both my Wife and I are enjoying it. Now I have it wired into my home network which consists of a Linksys switch in our home office and Netgear wireless router in the basement. The Linksys switch is wired to the router in the basement for internet/network connection...I have my Dell workstation running Windows XP SP3 (with all the latest patches from Microsoft, Mcafee AV) and the photosmart printer wired to the switch. I installed the HP software and drivers from the disk on the XP workstation and all is well...prints, scans and I'm able to view the printer settings, ink levels and what not.
NOW my Wife's Dell Vista laptop (which is patched to the latest from Microsoft, Mcafee AV) is getting really annoying. First I hate Vista but that’s another story...the Vista laptop connects to our home network via the wireless network through the Netgear router. So I followed the same steps as my XP workstation, it finds the printer during setup and all is well till the part when it wants to send a test page...so I opt to skip the photo test page and just do a standard one. Well it "sends" a test page or at least it looks like it does but nothing comes out of the printer (ie no activity from printer). The printer icon shows up in the system tray in the lower right hand corner of the screen near the time and when I put the mouse pointer over the icon is says "0 in queue" so I double click the icon to see if I can get more info and nothing happens. Right click the icon and choose open all active printers and again nothing. The printer icon is in the system tray for about 10-15 seconds and then disappears.
So I'm a little confused here, I check the printer in "printers & faxes" and both it and the fax part are listed...the printer even says it’s in "ready" status. I start the HP solution software on the laptop and I am able to scan from the printer to the Vista laptop fine, I'm able to view printer settings, network settings, ink levels and what not. I JUST CAN'T printer to it.
I tried another test page from the printer properties within Windows, again the icon shows up in the system tray and it says "0 in queue" and the icon disappears after 10-15 seconds. I then try to print a picture using the HP software and the same thing...icon shows up in system tray "0 in queue" and it disappears.
Did I do something wrong or am I missing a special step for Vista machines? I did uninstall and reinstall software/drivers and manually removed the printer and then reinstalled everything with no luck and no change...still acts the same.
I'm lost at what else to try. I think I tried the obvious stuff. I've searched the web to come up blank with a similar situation like mine...I've seen others complain about printing 1 page documents and the printer prints 3,6,16 pages at a time which is the opposite from my situation.
Any input/advice would be greatly appreciated.
Thanks in advance,
Bruno

Have you received an answer to this question? I'm having the exact same problem. Spent 4 hours on the phone with HP tech support and no solution.

I can't seem to use the wireless connection to connect from my macpro to hp officejet 4500 g510g-m

Hi, I don't know how to connect my hp officejet 4500 g510g-m to my mac book pro. can anyone help me? i can't seem to find the ip address for the printer. this can be connected wireless right? it wasn't connected to the modem. it is okay?
Thanks in advance.

Hi,
The Officejet 4500 support ethernet connection only, using wired network connection.
Only the 4500 Wireless model provide wireless connectivity.
Please make sure to connect the printer to your router, then it should become available from the Mac.
For any further issue, please clarify what router you are using.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to print a PDF file using the BI Publishing server

Hi,
I have a BI publisher server version 10.1.3.4.2 on W2K3 43 bit.
I can access through the url that server.
From my desktop I access through an url my Oracle APEX application.
It has been configures with:
Report Printing:
Print Server Protocol: Advanced (requires Oracle BI Publisher)
Print Server Protocol: HTTP
Print Server Host Address: the IP address of my BI Publisher server
Print Server POrt: 9704 (from instllation of BI)
Print Server Script: /xmlpserver/convert
On the page I want to print, it is configured with:
Download:
PDF option is checked.
When I click on Action -> Download -> PDF for this page, I get the error:
<file>. pdf file can not be opened because the file type is not supported or because it is damaged (because, for example as an e-mail attachment is not sent and correctly decoded)
Does someone has an idea what the problem is and where I should investigate further?
Thanks by advance for tips.
Kind Regards.

If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

Unable to print from my laptop using the wireless connection..

Similar Messages

Maybe you are looking for