Unable to print full length 24" x 132" from adobe. Stops part way.

I am trying to print an adobe document of a CAD drawing 24" by 132" with the 1050c plus. The plotter prints about three-quarters of the way, stops printing, then rolls out the rest of the page. I've tried all that I think of in the print settings of adobe (i.e. paper source - roll, roll size - 24 inch, under more sizes - entered size, set memory both printer and computer, quality - fast). The only thing that seems to help is the fast quality setting, where I get a bit more of my plot, but not all of it.
If you have any suggestions of what else I can try please let me know. Any help is much appreciated.

Hi,
Check for the print mode in the print options and set it as 3- print and archive .
Regards,
Ram

Similar Messages

Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

Unable to print to Canon iR-Adv C5045 from MacBook Pro that is connected to Windows computer and shared on the network

I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network. I am connected to the network by ethernet.
I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
When I print it appears to be printing but nothing comes out. I checked the completed jobs from the Print Queue and the job is listed. Checked the print log on the printer and it isn't listed. Is there a different driver I should be using for this configuration?

You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier.

Unable to print drawing properly in Acrobat - however with Adobe Reader no problem !!!

Got a pdf (converted ACAD drawing) of which certain sections appear hardly readable on screen (grey, distorted ??)
Tried all print options (colour, B&W, save PDF again, check rersolutions, contacted supplier of printer etc.) I could think of but no improvements
By mistake I printed the file direct from explorer view and amazingly enough TEXT OKAY !
Printed original file to CutePDF_writer and - once again - section could be read without any problem
Thought I give the free Adobe Reader a try and once again: no problem at all
Adobe Acrobat is fully updated - beside a Java flattening scripts I have not had anything modified.
Strang situation: only with the professional tool I am using very often I am unable to print as required.
Looks to me the file to be printed has some fonts not recognized / supported / missing in my Acrobat software?
When yes how can I check & resolve ?
Actually puts me in a delicate position now - help urgently needed !
Assume I have to add fonts ? But got no warning anything missing...
And: should a professional software tool not at least match options / features of a free version ?
Added comment:
It's even getting more weird
Printing on an other printer (Minolta instead of Canon) NO PROBLEM AT ALL
Thanks for help in advance
Eddie

Got a pdf (converted ACAD drawing) of which certain sections appear hardly readable on screen (grey, distorted ??)
Tried all print options (colour, B&W, save PDF again, check rersolutions, contacted supplier of printer etc.) I could think of but no improvements
By mistake I printed the file direct from explorer view and amazingly enough TEXT OKAY !
Printed original file to CutePDF_writer and - once again - section could be read without any problem
Thought I give the free Adobe Reader a try and once again: no problem at all
Adobe Acrobat is fully updated - beside a Java flattening scripts I have not had anything modified.
Strang situation: only with the professional tool I am using very often I am unable to print as required.
Looks to me the file to be printed has some fonts not recognized / supported / missing in my Acrobat software?
When yes how can I check & resolve ?
Actually puts me in a delicate position now - help urgently needed !
Assume I have to add fonts ? But got no warning anything missing...
And: should a professional software tool not at least match options / features of a free version ?
Added comment:
It's even getting more weird
Printing on an other printer (Minolta instead of Canon) NO PROBLEM AT ALL
Thanks for help in advance
Eddie

Full length feature on FCP from mini-DV... benchmarking comparable DVD's

After over a year of post production, we just completed a full length kids’ feature film shot on a DVX-100A and edited in FCP. The title is "The Bracelet of Bordeaux", and the movie info is on IMDb and our website. This was a large scale project, with almost 300 actors, 50 crew members and 18 interior/exterior locations. There were over 60 shooting days. It was shot on mini-DV due to budgetary considerations.
The movie’s look-feel is exceptional, especially when viewed on a Mac HD screen and Sony NTSC monitor. However, when we first tested the movie in a theatre, playing a DVD through a high-end projection system, the quality was terrible. Ultimately, we achieved outstanding results by playing directly off the uncompressed FCP timeline through a Barco Hi Def projector and onto a 40-ft screen. We held a major theatrical test screening (3,000 people attended 10 shows), and the movie’s visual quality was stunningly good, receiving acclaim from audiences and critics. The results looked particularly film-like in the mid to back rows of the theatre (even numerous professional viewers thought that it was film). You can view audience comments and media reviews on IMDb.
Now we are creating a DVD to send to film festivals and prospective distributors. Of course, we will not be able to determine the projection system used at the festivals and the movie will mostly be exhibited from a DVD. I would like to know what full length feature films are out there, which were shot on mini-DV (especially the DVX100 or 100A), and edited on FCP, so I can use them to benchmark our DVD results. I have been living in the edit dungeon for over 14 months and have not kept track of movies shot in mini-DV and editing on Macs. Also, please provide any observations about the cinematic quality of these films
G5 Mac OS X (10.4.8) FCP, DVDSP

https://eww.pavc.panasonic.co.jp/pro-av/sales_o/04reports/2004webWW/WorldWideWW/ stuffsingaporeWW/stuffsingaporeWW.html
this film was shot DV
However I can't help feel you are about to embark on a wild goose chase.
If you are going to distribute a movie on DVD for projection in multiple theatres with different equipment for screenings you will not attend I don't see what you hope to achieve.
DVD is by nature a "standard" without too much room for manoeuvre if you are supplying what must effectively be labelled a consumer market. You will have to conform your movie to a bitrate which is sympathetic to all DVD players and not for example use a DVD9 and a higher bitrate for a DVD player you own and know will work.
Cinematic quality is subjective also, which has a true film look The Sound of Music or The Matrix ? There are plenty of filters out there to give a film look and feel but to be honest the defining factor between film and video is often the quality of lighting, acting and camera work and not so much a blatant "look". It's audience acceptance of a piece in a theatre environment, which is a big help in the first place since we all associate the cinema with film (oh and adverts for the local tandoori).
Your film will look inherently different to the competition and so it should . . don't compare it!

Unable to Print anything to Canon imagePROGRAF iPF8000S from 10.6.7

Do I need to downgrade to 10.6.6?
Anyone else having this issue - seemed to work just fine with my old MAC with 10.5.4, but since the company upgraded to a new MAC with 10.6.7, I am unable to get communication working to the Prograf wide format printer.
I can ping the printer from the new MAC, and print from PC's in the office just fine, but every job just hangs up in the queue from the new MAC....ERGGH!
I am using the 10.4-10.6 driver from canon (version 2.30).
Anyone have any thoughts on this?
Please help - I am backlogged with poster print orders and only have design software on the MAC.

Some Canon iPF users on this forum have reported that disabling 'Fast Graphic Process' has helped them with printing from 10.6.7.
This is located in the Main menu, under the Advanced Settings tab.

Unable to print to Win Server2008 R2 queue from Lion10.7.2, printer status gets paused or asks username and password for printer

Hi Everyone,
I have set up a print queue for HP CP5225dn on Win Server2008 R2 on a shared domain . When I install a print driver on Mac 10.7.2 Lion it sometimes ask for a 'user name & password' for the printer which has not been set by us on the printer.
Second issue I don't know how it reached to the point that I was able to send the job through but as soon as it starts to connect to the printer 'it turns the status to printer paused' or can't connect to the printer.
Printer works well on 'Bonjour' printing so I don't have any doubts on the printer driver. But HP doesn't have the drivers for CP5225dn for Lion 10.7.2.
I have to configure the printer via the queue. Please advise any workarounds.
Thanks
Yezdi

This easy to follow procedure (5 web pages with screen shots) worked for MacBook Pro 10.6.8 via Wireless-N to Windows 7 Home Premium SP1 x64 using USB Cable to HP Officejet 7210 All-in-One. This configuration had worked with Windows XP.
http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
Error messages encountered prior to using the above procedure:
authorization required
Backend returned status 2 (authentication required)
Cannot find server
Communication Failure: The computer is no longer able to communicate with your printer
cupsdAuthorize: pam_authenticate() returned 9
getaddrinfo: <windows printserver> nodename nor servname provided, or not known
Job held for authentication
On Hold (Authorization required)
pam_authenticate() returned 9 (authentication error)!
Printer Paused
Printer stopped due to backend errors
Session setup failed: NT_STATUS_INVALID_PARAMETER
snmpInk: Unknown host (<windows printserver>)
This computer seems to have a working Internet connection. but we cannot find "<windows printserver>" You may have typed the address incorrectly.
Tree connect failed (NT_STATUS_ACCESS_DENIED)
Unable to locate printer
Unable to locate printer Unknown host
Unknown host

Unable to print a PDF in Version XI of Adobe reader

we have uninstalled and re-installed XI several times. Suggestions?

Windows 7 Professional is our OS...I can print from my machine but it's a different printer. I'll try un and reinstalling her printer driver.
The error message just says "This document cannot be printed" or something generic like that.
Thanks for your help!

PrintJob unable to print my external swf which created from a pdf.

Hi Everybody,
We developed a tool which split pdf's uploaded by user into single page and convert each single page into swf. We used swftools to convert pdf to swf.
after converting swf files we show each swf as a single page to user, where user can add more colors, clip arts, text, images to it and later we can take print out, for testing we will print the final output as pdf.
Most of the times everything is working fine, but when pdf page have many layers, we are able to convert into swf successfully, but while printing some layers (mainly images) are missing in final print. We tried converting pdf to AVM1 swf and AVM2 swf files, in both cases the result is same. Did anybody have idea about this issue?
Regards
Vikram

Hi Karthik,
Please check below
You can view Log files on 14 hive folder <System Root>:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS . Use the ULS Logviewer tool to eficiently view the Log files http://ulsviewer.codeplex.com/.
Search for Log file with the viewer or check the latest file with time provided by Error page. That will show exact issues.
or
BCS supports null columns, but make sure the column is set to IsNullable in the db schema.
Please remember to click 'Mark as Answer' on the answer if it helps you

Unable to print to HP laser jet 3600 from Mavericks

I receive an error about legacy USB driver when I try to print.
Deleted printer and re-installed - same problem.
Looked on HP and Apple for support - but not joy. It just says to update via ASU - but there are no updates to install.
Apple website advises that 3600 should work fine with Mavericks
Very frustrating.
Any ideas most welcome.

Thanks Arthur! This worked beautifully. Thanks for the easy to follow step by step.
Here's how you reset the HP3600N printer to factory settings:
Turn off printer.
Turn on printer with checkmark button depressed.
Release button when all the lights come on 'Solid'.
Change Select Language on the printer screen to Cold Reset.
Press the checkmark button.
The printer will return to factory settings.

Sync stops part way "unable to process all items"

Suddenly my synchronisation on my phone as stopped working.
It stops at Sending data... 19 of 314. Says "Data transfer not possible, check data connection". Then says "Calendar: Incomplete. Unable to process all items"
The sync log says: "PC Sync has encountered a problem and has terminated the synchronisation" and "The Synchronisation was aborted by the user". (this last bit surprises me as this isn't the case!).
Phone: 6233
Nokia PC Suite: 6.81.13.0
Syncing over bluetooth connection.
I have tried:
- switching phone on and off
- closing PC Suite and re-starting
- running a repair on PC Suite
- restarting bluetooth software
No joy. Very annoying. I seem to remember having this problem a few months ago (perhaps with my old phone, but can't remember how I resolved it).
Any ideas?
Ian
PS this is a repost as the last one had bad formatting!

Doing it each day
Interestingly, it did it again this morning. I recreated the settings and it works again. However, I really don't want to have to recreate the settings everyday!
Does anyone have a long term solution?
Interestinly, when I re-ran it, it seems to pause at the 19th item (the one it was getting stuck on) but then carry on. Could there be something wrong with some of the entries in my phone?
Ian

I am unable to update my iPhone from ios4 to ios7, I know you have to do this via the computer however the backing up process stops part way through and it is unable to carry on

I have ios4 on my iPhone 4 and I have tried to update it to ios7 and to do this I know you have do use the computer. however part of the way through, the back up process stops and nothing else happens

I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

Addressbook - printing full page address labels

Here's a helpful tip for those trying to print Avery label sheets of the same address using the included Avery printing function in Addressbook: (ie: 80 of the same label on a single 5167 sheet)
Create a group.
Create a new card with the address etc...
Select the card in the second column.
Copy.
Paste 9 times, to create a total of 10 identical cards in the group.
Select All.
Copy.
Paste 7 times to create a total of 80 cards in the group.
Print.
Select save as PDF from the Print dialog.
With this document, you should now be able to print full sheets of address labels from Adobe Acrobat Reader.
YMMV
1ghz G4 MDD (FW800); 768MB; 80GB and 120GB HDD; GeForce4MX; 20 Cinema Display (ADC) Mac OS X (10.4.7)

Hi Rodger_
Thank you for the additional information, it was helpful.
I was speaking with one of my colleagues and we would like you to try the following steps. Once you have completed the steps please try printing again.
1)    Please reset your printing system, I have included a document on how to do this. Please be aware that this reset deletes all print settings and pending print jobs from your Mac.
2)    In the "Printers & Scanners" please click on the '+' and choose "Add another printer or scanner from the options (see screen shot)
3)    Choose your Laserjet CM1415fnw and at the bottom where it says "USE" please change it to the HP Laserjet (see screen shot) instead of AirPrint
Happytohelp01
I work on behalf of HP

Unable to print a pdf document

I have an HP Officejet 4315 All-in-One Printer and have been unable to print an pdf document. I have Adobe X installed.
How can I get the print to work on pdf documents?

How are you trying to print to pdf?
Don't go via PostScript or Acrobat Distiller, which are old deprecated technology.
You use:
Menu > File > Print > PDF (button bottom left) > Save as PDF…
Peter

Unable to print to oversize pages using Adobe FrameMaker 9 \ 7.2 and Distiller 9.0

I am trying to print to PDF a publication that is full of oversize wiring diagrams from Adobe FrameMaker 9 and 7.2 with Distiller 9.0. The pages are all text and images ranging in size from standard A3 and A4 size sheets through to a foldout being 1470 mm W X 297 mm H. We have no problem printing A3, A4 and 630 mm W X 297 H. These are all Portrait images. When we set up our custom print size to accomodate the 1470 mm W X 297 mm H we get the pages without the content, and even some of the oversize pages are not the correct size on print.
The page sizes we are using are:
A4 (This is all good)
A3 (This is all good)
630 x 297 mm (This is all good)
840 x 297 mm (Problems from here on)
1050 x 297 mm
1260 x 297 mm
1470 x 297 mm
The procedures we are using to set up the printing are:
1. Print to PDF (Also tried save to PDF)
Under Print Setup make sure you select PDF Driver and select the Paper size as largest that is in your book. Example: If A4 and A3 pages, print to A3
2. Select Generate Acrobat Data and select
See attached Screen shots for the settings we are using:
Note: Back in FM Print dialogue; make sure Print to File is turned OFF, before you click Print
Any assistance would be greatly appreciated.
Regards
AJ Wilkinson

Create a specific FM file having a custom page size appropriate to each unique "content set".
Create a FM Book file.
Add the FM files.
Work up configuration (Hypertext, Cross-References, autonumbering, variables, etc.) as desired.
In Print Setup -
Set page size to the page size of the largest FM file in the Book.
(you may have to go into the Adobe Printer and add one or more custom page sizes so the page size needed is available)
Set orientation to landscape if any FM files are such.
Idea is, if needed, FM files for the content in the various page size/orientation that is appropriate to the content.
If that means 1FM file of custom size and appropriate orientation then do it.
Book files can deal with it.
Back to Page Setup.
Do the Page Size & Orientation.
Access 'Propertires' - is the Distiller job option selected the one you want/need?
Create one if need be so that it is available.
Go into the Print Book dialog.
Configure as needed (remember Acrobat data links, etc. &, oh yes, back in FM be happy with the configurations under tabs for PDF Setup).
Print the Book.
Use Distiller to take to output *.ps to *.pdf (may want the use a "watched folder")
Output PDF can/will reflect the the different page sizes and page orientations.
n.b., FM-Acobat-Distiller releases have a "sync band".
It is discussed somewhere in some kb articles.
I'm not sure if FM7.2 functions quite right with Distiller 9.
FM 8 will (&, of course FM 9)
I've had no problems with FM7.2 or FM8 and Distiller 8.
Be well...

Unable to print full length 24" x 132" from adobe. Stops part way.

Similar Messages

Maybe you are looking for