Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

Similar Messages

Officejet 150 wont print full pages in Word

Officejet 150 Mobile misses printing parts of a page of text in Word 2007. I created several lines of text and it simply won't print them all. I then filled an entire page with Ariel, size 11 font. It skipped printing every third line. I repeated this with a larger font and it cut the text, horizontally, along the same width lines. Did the same thing in Corel WordPerfect X4 with the same result. Ditto in Avery Design & Print. It won't print entire 3/4" sections across the page. I've uninstalled drivers/printer, rebooted, etc., several times to no avail. Print Doctor keeps saying device is busy but it's not. No print jobs in que, printer was cycled on and off (several times).

Hey @dmartin05,
Welcome to the HP Support Forum.
I understand your HP Officejet 150 Mobile All-in-One Printer won't print full pages from specific word processing programs. I would like to help.
I recommend you try the following steps so we can determine whether this is most likely a hardware versus software issue:
From the front panel of your printer, make a black copy of an ordinary full-page text document. Does the partial page/print quality issue persist?
Next, touch Setup / Reports/ and Print Quality Diagnostic. How does the Print Quality Diagnostic from your printer compare to the report highlighted in the following link?:
HP Officejet 150 Mobile All-in-One Printer Series (L511) - Troubleshooting Print Quality Issues
If you were able to make a decent copy of a text document, and your Print Quality Diagnostic Report printed without any discernible issues then we can safely assume the issue is software related. If that's the case, please respond to this post and I'll be happy to provide further troubleshooting suggestions.
If you find it's the opposite and there are print quality issues from the front panel, treat this as a hardware issue and follow the troubleshooting steps provided in the above-linked article.
Best of luck - have a great weekend!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Officejet Pro L7680 won't print full Page from Win 8.1

Installed driver for this printer on a 64bit Dell XPS running 8.1. The data on the computer says the installation is satisfactory.
The printer printed a full page fax report and self diagnostic page. But when prining a full page from Word, or the internet it will only print about half a page. then it may stop, or it may print a series of pages with a few characters on them. The print queue says that all of the data has been transmitted to the printer. It will print a full page with little content, like a row of x's at the top of the page, a row in the middle, and a row at the bottom. It also prints a full page from excel if the spreadsheet contains only a small amount of data. The same printer prints, faxes, and scans satisfactorily from an older computer running XP. What can I do to the driver to have it print full pages? Printer model no is C8189A, serial No {Personal Information Removed}

I have same problem, hope someone answers.

Cannot Print full page 81/2 x 11

Hi:
I set up a 16 slide keynote presentation and everything is fine.
I wanted to print it out and in printing it :
The Pages are printing in a 4" x 5 1/2" (inches) size on a 81/2 x 11 page horizontally and
5" x 7" on a 81/2 x 11 Page vertically.
I have the slide size at 793 x 595.
I have looked in the printing menu options and I cannot see or make any changes that change the actual printing size.
I have not had any printing issues with other applications when needed to change a size. IE: iPhoto 81/2 x 11 to 4 x 6.
Any advice or website would be appreciated.
Thanks.
Greg

I actually figured it out.
You have to have it on individual slides to print full page.
Seems somewhat incorrect but it worked thats all that counts.
Greg

How can i avoid printing full pages?

How can I avoid printing full pages when printing a photo from my iphone to my hp envy?

Hi,
While pritning with Apple Airprint, the image will print as is..
You may find some more customization steps by using the HP Print Home & Biz app which allow some more customization of the printout:
Follow the steps below to find how to get the app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3692888&tmp...
Below you may find some more customization options of the app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01930282&cc=us&dlc=en&lc=en&product=3692888&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer won't print full page

my hp m601 printer won't print full page from web browser , it's not working even if i'll change landscape nor portrait

@ti_Sh
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Mac Mini envelopes printing full page size from contacts

Good day.
So here’s my story.
In early summer I printed out enveoples form "Address Book" for our wedding invitations from a Macbook pro 2.16 GHz running 10.6.8. Everything worked out perfectly.
I then got a Mac Mini 2.7 GHz Core i7 for a wedding gift and I did a data migration from my Macbook Pro to the mac Mini. It was running 10.8.5 and is now running the latest version or Maverics. The printer I used for both envelope printing jobs, an HP CM1415fnw color MPF has also been updated to the latest software version.
The problem I am having is that the Mac mini will NOT print envelopes in the custom envelope size, it always prints full page. It has done this since the data migration form the Macbook Pro running "Address Book" to the Mac Mini 10.8 running "Contacts". I thought is was an operating system issue so I waited for the new OS Maverics. I did another print out from both computers tonight to see if the issue had resoleved it's self. NOPE. I even do a print preview on the mini which loads up Preview and it shows the custom size, though it prints out full page
All settings on both computers are the same for the custom envelope size.
Anyone know how I can fix the paper size issue?
Thanks for anyhelp I get
~rodger
Label from MacBook Pro
Label form Mac Mini
Layout from MacBook Pro
Layout from Mac Mini
Orientaion from Mac Mini
Orientation from MacBook Pro

Hi Rodger_
Thank you for the additional information, it was helpful.
I was speaking with one of my colleagues and we would like you to try the following steps. Once you have completed the steps please try printing again.
1)    Please reset your printing system, I have included a document on how to do this. Please be aware that this reset deletes all print settings and pending print jobs from your Mac.
2)    In the "Printers & Scanners" please click on the '+' and choose "Add another printer or scanner from the options (see screen shot)
3)    Choose your Laserjet CM1415fnw and at the bottom where it says "USE" please change it to the HP Laserjet (see screen shot) instead of AirPrint
Happytohelp01
I work on behalf of HP

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

I am unable to print "ALL Pages" using the Adobe Print plugin in Firefox, only the first page gets printes. however IE works perfectly fine.Please advise. Is it some way that firefox identifies the complete web page..? PLease help

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

Can't print full page from apple home computer.

When using tynet website to fill out my paperwork from home on apple computer, firefox does not print full page. It prints about 3/4 of page.

Does Firefox cut off the text that isn't in the other part of the page, or does it overly shrink the content to fit in the smaller rectangle? In the latter case, check out: [http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page].

Print a report to a specific printer from Forms

I have a form from where i want to print a report to a specific printer (not the default printer). Is there any way to do this from Forms 9i. Im using the Orarrp but it pops up the printer dialog and shows the default printer. Is there any way to harcod the printer name. the printer is on the network..

If i go to my control pannel and see the list of printers i take the printer name from there. should i put the path of the printer? i kno the port of the printer .it come like ip_192.1.11.1_p1 ..how do i define the printer name? if i dnt give the printer name shouldnt if fire to the default printer ..my code is as follows
declare
REPID REPORT_OBJECT;
V_REP VARCHAR2(100);
REP_STATUS VARCHAR2(20);
BEGIN
REPID := FIND_REPORT_OBJECT('CUS_PRINT');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_DESTYPE,PRINTER);
     SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_SERVER,'test');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,'P_CUSREF='||:CTRL01.CUSREF||' PARAMFORM=NO');
     MESSAGE('SET REPORT PROP');
V_REP := RUN_REPORT_OBJECT(REPID);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
MESSAGE('RAN REPORT');
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
     REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
     IF REP_STATUS = 'FINISHED' THEN
          IF NVL('TEST',' ') <> ' ' THEN
          GEN_ALERT('NULL_ALERT','TEST');
          END IF;
          ELSE
     GEN_ALERT('NULL_ALERT','Error when running report');
     END IF;
END;
what should the desformat of the report should be..when im trying to run this it gives me 'no data found' error...why???

6830 Not Printing Full Page

Installed my new printer this morning using a wireless network. Finally got that to work after 2 hours, but now it does not print a full page from Word, Excel, or web (only applications I tried). It cancels the print about half-way down the page. Thanks.

Update After getting NO help from HP and on this forum and being unable to scan or print a document on this piece of crap for a month.
It has given me great pleasure to smash the printer into pieces the sound of breaking glass was music to my ears ( we have recently moved house and the receipt is lost so no refund available from the 5 month old printer.
Over the last 3 years I have bought a HP desktop / Ext hard drive/ 2 laptops and this printer only the ext hard drive had not required a repair. the two laptops both has factory faults thankfully under European law I was given a full refund the desktop failed requiring a return and free repair and now this.... I am not a violent man but we all know to get anything repaired when its not your fault is a nightmare of paperwork taking up to 6 months.
A hammer is SO MUCH MORE EFFICIENT.
I declare I will NEVER buy HP ever again!

PDF document not full page but need to print it as a full page

Hi,
I have a pdf document which is 15 cm by 8 cm and need to print it as a full page without the white border making up the full page. How can I do this?
The document was created in publisher and saved as a pdf.
I am reading the document from Adobe Reader on a Windows XP machine.
Thank you for any help any one can give.

Do you have a printer that can print pages without a white border?
Very few printers can do this.
Aandi Inston

Can you print only pages with a specific master page designation?

I'm laying out a fairly large technical book using InDesign CS4 and need to print proofs of pages that use a specific custom master page. Rather than scrolling through the Page window and writing down page numbers that use that specific master, i'd like to have a quick way of doing it. If anyone knows of a way to do this by either script or other means, I'd really appreciate the help. Thanks!
NOTE: Originally posted in general discussion and recommended to scripting forum.

Straight to the point, methinks. Extensive commenting was free, today.
// Gather Master Spread names
masterlist = app.activeDocument.masterSpreads.everyItem().name;
// Create a simple yet effective dialog
masterDialog = app.dialogs.add ({name:"Select Your Master",canCancel:true});
with (masterDialog)
          with (dialogColumns.add())
                    with (dialogRows.add())
                              listbox1 = dropdowns.add ({stringList:masterlist, selectedIndex:0});
// Get input
if (masterDialog.show())
          selectedName = masterlist[listbox1.selectedIndex];
          // Build Print string
          pages = [];
          for (i=0; i<app.activeDocument.pages.length; i++)
                    // What if there is NO master page applied?
                    //          .. then it's NULL and doesn't have a name, that's what
                    if (app.activeDocument.pages[i].appliedMaster != null &&
                              app.activeDocument.pages[i].appliedMaster.name == selectedName)
                              pages.push (app.activeDocument.pages[i].name);
          // Make a printable string of it
          printpages = pages.join(",");
          // Feed it to your current Print settings
          app.activeDocument.printPreferences.pageRange = printpages;
          // Show the Print dialog
          app.activeDocument.print (true);

Can't get it to print full page

Hi,
I've got a macbook os 10.4.11 and my wife has the exact same one. When I try to print anything on our Canon mp830 printer it gets reduced to about 1/3 the size and moved to the top left corner. This doesn't happen with my wifes computer, it prints the full page no problem. So I think the problem is in my computer. I've tried changing just about everything.
Any help would be greatly appreciated.
Thanks.

hi have you installed the correct driver? if you have i dont have any other suggestions

Not able to print full pages via wireless

Hello,
I am looking for some assistance to troubleshoot an issue I am having printing from a computer using wireless to my wireless connected HP Officejet 4632.
When I open a .pdf, for example, on a PC that is hardwired into my router, I can print the entire document with no issues. However, when connected via wireless to my network from another PC (which has a full signal strength by the way), I get partial pages and/or missing pages in the print job.
Are there any troubleshooting steps you might recommend?
Thank you,
- Steve

Hi Steve,
What operating syste, you are using on this PC?
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP Officejet 4630 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP Officejet 4630 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP Officejet 4630 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue may been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to print full page to 1 specific printer while other computers can.

Similar Messages

Maybe you are looking for