Unable to print on LEGAL paper

Hi,
We have newly install printer Konica Minolta Bizhub 420 printer. I have
configured the device type as HPLJ4: HP Laserjet 4 series PCL5 as I did
not find the Konica name in the list. The printout are coming on letter
size even after configuring the tray 3 as LEGAL in Paper Tray and Tray
info tab. Tray 3 contains legal size papers. I referred the SAP note
1036961, 1103826, 1135038, 408189.
Please suggest the configuration or any other compatible device to get
print on legal paper.
System is R/3 with Basis patch 62.
Thanks in advance.

hi
please refer to the link below
http://help.sap.com/saphelp_nw04/helpdata/en/32/da2e88713c11d58cd90000e8284931/frameset.htm
hope this helps
Regards
Aakash

Similar Messages

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

Hp laserjet m 1005 mfp legal paper printing prblum

hp laserjet m 1005 mfp legal paper printing prblum

Sorry, but scanning is not supported with 10.9 using HP/Apple drivers.
You could try VueScan software, it may work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8500A - unable to print on odd-size paper

After a couple of hours of frustration, I have decided that I an unable to print on odd-sized paper on our brand new HP printer! On an older string in this user forum, one suggestion was to make a paper cut-out from regular sized paper to put on top of an envelope to "fool" the printer into thinking it was using standard sized paper. I am trying to print odd-sized wedding invitations, and in order to to do this, I wouldn't be able to use the paper guides intended to keep the smaller paper in the middle.
Another suggestion would be to create a "custom size" paper in the printer properties, which doesn't seem to be possible in Windows XP as far as I can see.
My card-stock paper measures 4 3/4" x 6 7/8" Neither 5 x 7" nor 4 x 6" will work and I have tried numerous others, such as Janpanese postcard, Index card 4 x 6, etc.
Any suggestions? This is frustrating enough to look at other namebrand printers next time, but I guess I'm stuck with this one for a while!

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN

Printer requesting to load legal paper so print job fails

The printer is a HP Laserjet 4 series PCL-5, device driver: HPLJ4.
It has 3 trays: #1 is a bypass, #2 and #3 have 8.5x11 paper.
This printer has been in use for some time, but suddenly the printer is now requesting to "load plain legal" when a print job from SAP originates. If the user disregards this message and prints anyway then only part of the print job comes out. If legal paper is loaded, the print job comes out. But the users do not want it printed to legal, they want the 8.5x11. I have tried specifying the 'Tray Info' as letter in SPAD. The printer works just fine for any Windows applications like Microsoft Word, but not with SAP. Another printer (same brand and device type) does work as expected and the config in SPAD is the same for these 2. The printer support group says nothing has changed in the config in the printer itself and that the issue has to be on the SAP side.
Any feedback on this would be appreciated!

Since you say another printer of the same brand using the same device type works with the same settings in SPAD I think the problem is with the printer itself.
This issue comes up occasionally at my site - often after someone prints something out of the ordinary like labels. Nothing changes in the configuration menu of the printer but the printer asks to load legal when printing from SAP.
I think there is a lever on the side of the paper trays on HP Laser Jet4's that can be adusted for paper selection. Have your printer support group compare the paper tray lever settings of the printer that doesn't work out of SAP with one that does.

Printing on legal size paper

I have an hp psc1210 and I can print on legal size paper from my desktop, but when I am on my laptop that is on the network, I can't print on legal size paper. If I am using word perfect, the software automatically adjusts the bottom margin to 3.48" so that only what is visable on a letter size page is printed and in word it cuts off any characters below the letter size area. Any suggestions for solving this problem?

hi there,
It seems that you have a software incompatibility between your word perfect and the psc,pls. try these steps:
add a universal driver on your computer
=open printers and faxes or printers
=click add a printer
=select add a local printer
=if your printer is connected via usb cable on your desktop, pls select on use existing ports and choose usb virtual port xxx
=if your desktop is connected via ethernet cable,pls.select create a new port and choose standard tcp/ip port and click next
(for network connection only: if it will ask to enter your ip address pls. print the ip address from your printer and enter it on the computer) and click next
=if it will ask for the manufacturer, pls. select hp on the left
=on the right side find hp deskjet 990c and click next
=use existing driver
=set as default printer
=you can rename the printer to psc 1210
=try printing again
if the issue still not resolved,uninstall and reinstall the printer software
pls. reply for further assistance

How to configure printer to use bypass tray when printing legal paper and envelopes?

I have a new Phaser 3610. Tray 1 - contains Letter paperBypass Tray - Legal paper and sometimes envelopes How do I configure my printer to know when to use the bypass tray for legal paper when I that is what I want to print to from Excel? In Excel, I have legal selected but it is still pulling the paper from tray 1 instead. I also print envelopes occasionally. If I stick an envelopoe in the bypass tray, I want it to print from there like when using Word to create enveloples, instead it is pulling it from Tray 1. I have tried to adjust both settings on the Printer control panel and the Xerox printer software. I have had no luck.

Hi burnsey23,
Thank you for using the Support Forum. Please take a look at the solution for using smaller paper in the bypass tray. I know it says smaller but use the same steps for larger paper as well. Also make sure that the orientation on Excel is set to the orientation that corresponds to the way the paper is loaded in the tray. If this does not help please consider contacting your support centre for further assistance.

Unable to Print 2-Sided on L7780...

Hello...I have a L7780 that has worked fine for approximately a little over one year. I was printing from Tray #2 (legal-sized paper) the other day & suddenly experienced numerous paper jams. Multiple times, I had to remove the duplexer, as well as open the print-carriage access door to clear the jams. Eventually, I was able to resolve the issue & printing resumed in a normal fashion.
Today...I wanted to print a PDF document & found that it was only printing one side of each page; however, 2 sides would successfully print intermittently. I checked all of my settings & tried again, to no avail. I thought that perhaps it was the document. I tried another PDF document & then a Word document...same results.
I aligned & cleaned the printheads, as well as ensured that the printheads were in correctly. I also calibrated the linefeed. I checked to make certain that the duplexer was inserted correctly ~ I removed it & reinserted it. The printer will feed the paper back through, as it always has...it simply will not print on both sides of the paper consistently, as it is supposed to.
I am unable to print a 'Self-Diagnostic' page ~ only a very tiny strip of the heading of this document will print.
I also went into the printer properties to make sure that my accessories were installed...I uninstalled & re-installed them. I have unplugged & plugged the printer back in the socket.
There are no alerts that come up after the printer boots up & runs through its self-diagnostics.
I have also tried to print from both trays.
Additionally, I installed the S/W listed below...
HP Officejet Pro Full Feature Software And Driver
I am very concerned, as this is a replacement for another printer (different model) & the duplexer was the problem w/the previous printer. I appreciate any suggestions or input that anyone might have.
I use this printer wirelessly & my OS is Vista Ultimate 64-bit.
Thank you!
Dana.
Message Edited by Dangerous_D on 01-09-2009 11:37 PM

Apparently, I have similar problem as yours. My L7780 wireless all-in-one printer worked perfectly fine for a bit more than a year but now the printer kept on popping an error message that says out of paper, load paper when printing two-sided documents. At first, it prints 2-sided erratically and then deteriorates with that error message popping up after every 2-sided printing attempt. I have tried every possible solution (e.g. using different tray, fan the paper stack and re-insert, re-startting both printer and computer, and so forth) but none was successful. I paid $500 for this unit with no third party warranty coverage. Sigh...
Dangerous_D wrote:
Hello...I have a L7780 that has worked fine for approximately a little over one year. I was printing from Tray #2 (legal-sized paper) the other day & suddenly experienced numerous paper jams. Multiple times, I had to remove the duplexer, as well as open the print-carriage access door to clear the jams. Eventually, I was able to resolve the issue & printing resumed in a normal fashion.
Today...I wanted to print a PDF document & found that it was only printing one side of each page; however, 2 sides would successfully print intermittently. I checked all of my settings & tried again, to no avail. I thought that perhaps it was the document. I tried another PDF document & then a Word document...same results.
I aligned & cleaned the printheads, as well as ensured that the printheads were in correctly. I also calibrated the linefeed. I checked to make certain that the duplexer was inserted correctly ~ I removed it & reinserted it. The printer will feed the paper back through, as it always has...it simply will not print on both sides of the paper consistently, as it is supposed to.
I am unable to print a 'Self-Diagnostic' page ~ only a very tiny strip of the heading of this document will print.
I also went into the printer properties to make sure that my accessories were installed...I uninstalled & re-installed them. I have unplugged & plugged the printer back in the socket.
There are no alerts that come up after the printer boots up & runs through its self-diagnostics.
I have also tried to print from both trays.
Additionally, I installed the S/W listed below...
HP Officejet Pro Full Feature Software And Driver
I am very concerned, as this is a replacement for another printer (different model) & the duplexer was the problem w/the previous printer. I appreciate any suggestions or input that anyone might have.
I use this printer wirelessly & my OS is Vista Ultimate 64-bit.
Thank you!
Dana.
Message Edited by Dangerous_D on 01-09-2009 11:37 PM

I am unable to print color photos from i photo using a Brother Printer

I am unable to print color photos from i photo using a Brother MFC-6490CW all in one. The photos appear to be in grayscale. I have checked the printer settings, but for some reason I am not able to access the color management on my printer from printer set up. It only gives me the standard option. I have spent hours checking Bother's website and Apple's and I am not able to come up with a valid answer. I know that the color print works. If I print something from the internet of from outlook it will print in color. I know all of my cartridges are in working order, I have cleaned the print head on my Brother, but I am still not able to print photos in color!!!
What puzzles me the most is why I am unable to really access the color management menu on my printer? It just does not come up. I have the option from paper handling to print photos, but this has nothing to do with the quality. I have also tried printing the photo from an Adobe PDF file and I still have the same problem. Can anyone point me in the right direction? Thank you.

In the Print dialogue box click on the little triangle to the right of the name of the printer. That will expand the dialogue box.

How can I print BOTH legal and letter on my duel tray printer????

How can I print BOTH legal and letter on my duel tray printer from my mac? on a pc you can choose "print according to pdf size" and the mixed document will print in both legal and letter auto-selecting the printer tray.

Hello CKAY,
My old printer does not show 8x10 either.
In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
Close out the printer and open it again and the new size you created should show in the list.

Unable to print from the browser, for example: in my amazon account, i am unable to print shipping lable by hitting "print" button. It worked in IE, but not now.

I used to be able to print from the browser, specifically Amazon...hit print and I would get the print/preview from windows. In IE it worked perfectly, but IE start messing up and grinding to halt, taking MINUTES to load a page, like dial-up!
Firefox is fast and runs great....just cant PRINT..grr.
also... noticed that i am unable to read my online paper now. Paper will open, i can read the full page view, but when I try to hit a particular article to enlarge in another popup window, nothing happens. perhaps a security something preventing popups? but there is no option to do otherwise.
again, was able to read articles in IE.
Am I missing an add-on?

I too developed the same problem about 2 weeks ago. First in Safari then Firefox. I have 2 printers, one local and one networked (different brands etc). Neither browser will print ANYTHING from the web to either printer. Jobs are not stuck in queu - goes to printer but just spits out blank paper. Not even email. No pop-ups involved (like the usps site). Not website specific. All other applications on the machine print perfectly to both printers.

HP Photosmart Premium C309g-m unable to print ("check printer documentation")

My printer is: HP Photosmart Premium C309g-m
My computer is: Mac (Mac OS X system)
After removing a jammed paper (probably the incorrect way), I now receive a message to check "printer documentation" and then press "okay". Tried everything I could find, including uninstalling and reinstalling. Still receive same message, and still unable to print.
Can anyone tell me in very simple terms how to fix this?

Hi there chnich,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet Pro 6830 unable to print

I was able to print wirelessly to my Officejet Pro 6830 and all of a sudden I can't do so today. I have performed diagnostics and everything shows up OK. However when I checked the printer job status, nothing shows up.
How do I go about solving this issue?

Hi @VexedHPUser
Perhaps the Microsoft Fix it utility will help;
What it fixes
You are unable to install a printer, connect to a printer, or print more than one job at a time
You receive an error indicating your Print Spooler service is experiencing problems
You receive an error indicating your is not the default printer
You receive an error indicating: cannot be contacted over the network
Identify if your printer is turned off
Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
Identify if your printer paper is low or empty
Identify if the printer has a paper jam which is preventing it from operating normally
Identify if a print job that is in the print queue is preventing other print jobs from printing
Identify if you need to update your print driver
You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem
If the issue persists, I think it might be a good idea to reach out to the Microsoft Community.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Unable to print remittance advice for certain quick payments

Hi,
This is regarding issue " Unable to print remittance advice for certain quick payments."
Product version:11.5.10.2
Description:
-Customer has paid through the payment batch.But the payment batch data is not available in ap_inv_selection_criteria_all.
-The status of the check is 'RECONCILLED'.
-The payments have already been submitted to the bank and reconciled to bank statement lines.
-While running "Send Separate Remittance Advices" concurrent program, some payments generated from Quick Payment are not available for selection for generation of remittance advice.
Research:
Search in the metalink but could not find any related issue.
Could you please adivce me how to proceed on this issue.
Thanks
Subhalaxmi
Edited by: user13536207 on Feb 13, 2012 12:43 AM
Edited by: user13536207 on Feb 13, 2012 12:46 AM

Found the problem.
Paper size for those documents are actually A5 size.
Solve it by adjusting the Scale to paper size in the printing option to the size that our printer is set to printout
which in my case is 'Letter'
Hope this helps anyone who is encountering the same problem.

Unable to print on LEGAL paper

Similar Messages

Maybe you are looking for