Unable to print: server failed is the message. Any ideas? My internet connection is fine
Printer worked fine yesterday! Today it says 'Job printing on server - waiting for printer to become available' . Network Diagnostics says there is a working internet connection but it cannot find the Epson Stylus Office BX305@my iMac address. Any ideas?
The Network Diagnostics shows a green light for Ethernet, Network Settings, ISP and Internet but the Server is red and says Failed: the Message reads 'This computer appears to have a working Internet connection, but cannot find "EPSON". You may have typed the address incorrectly." (Not aware of having typed any address, correctly or otherwise, and it was working fine until now! The ? button says:
Can’t connect to the server you’re looking for
Network Diagnostics has determined that your Internet connection appears to be working and can connect to the Internet, but can’t connect to the server you are looking for. There may be something wrong with the server you are trying to reach.
Wait a few minutes and then try again.
If you continue to have problems, contact your Internet service provider.
Is that the problem do you think?
Similar Messages
-
I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!
Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum. -
I am trying to publish my ibook. When I click the publish icon I immediately get this message: 'iBooks Author couldn't connect to the iBooks store. Check your internet connection, then try again.' My internet connection is fine, and this book was uploading fine yesterday. I want to change metadata.
When you are having problems with a site - consider weather between you and it and amount of traffic (time of day).
Bad weather can cause problems with a connection as it travels on the information highway - hazard a guess all traffic that went through Buffalo is being routed elsewhere.
Bad weather can slow down handshake etc to the point of requiring too many resends - so Ibook is timing you out. -
Unable to use itunes due to the following any ideas??
When I open itunes application from the dock I am then asked for a log in name and password. With the following text. To access this site , you must log in to area "daap" on 0.0.0.0. Please help!! I then have to force quit the application to close it. I have tried entering my apple id and password but to no avail.
Check iTunes / Preferences - Sharing
If any of the boxes are selected including Share my library on my local network, deselect then click OK
Try launching iTunes. -
My iphone 4 has "died" - looks completely black, won't seem to recharge, can't turn it on or off. It does hum when I change from silent to non-silent. I have been able to back it up, and download any photos off it.
Before it died it ran out of battery really fast - which is not like it, but I've had it on the recharger now for over 10 hours. No go.
Before I take it to the genius bar I want to update to the latest software. 7.0.4 is recommended in iTunes.
But when I try to update it iTunes says "Itunes could not connect to the iTunes Store"
After reading some information about updating to IOS 7.0.4 I might be better to wait till the genius bar? Athough they might send me home again with no phone which I don't appreciate!Thanks ckuan, that has at least got it opening and "looking likely". I had tried that, but perhaps not holding those two buttons for long enough...
It says no SIM card and is very slow. Have reinserted sim a few times and now registering sim. The screen where you have to enter your password to unlock the sim was 'patchy', not clearly showing. (e.g. the circles around the numbers seem to be coloured, not the usual plain white circles around the numbers/letters). Never seen that before.
Battery showing as full. I'll now and upgrade my software
Thanks very much for your help -
Header 1
Header 2
when synching iPhone i get the following message: iTunes could not sync contacts to iPhone because the sync server failed to sync the phone. any idea how to fix this problem?Did you try the solutions mentioned in this article? iTunes for Windows: "Unable to load data class information from sync services" alert
-
I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?
How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.
-
Error: "DoFunction fork failed" in the Messaging Server 3.x logs on Digital Unix or AIX
Receiving error message DoFunction fork failed in the Messaging Server 3.x logs
on Digital Unix or AIX.
<P>
The dxkerneltuner command is one way to raise the number of user
processes on Digital Unix. Steps follow:
<OL>
<LI>Login as root (or su to root) on Digital Unix and execute the
dxkerneltuner command.
<P>An X-Windows window will pop up with a list of
kernel subsystems (tuning categories).
<P>
<LI>Double-click the "proc" subsystem.
<P>
A child window will pop up, displaying parameters in that category, along with
their associated values and limits. These should include parameters
named "max-proc-per-user" and "max-threads-per-user", which are by default,
64 and 267 respectively.
<P>
These should be replaced by values more
consistent with the Messaging Servers resource requirements. Provided
the default Messaging Server installation is used, more appropriate values
for these parameters would be 640 and 2560 respectively.
<P>
<LI>To implement
these new values, replace the value 64 with 640 for max-proc-per-user in the
child window and replace the value 267 with 2560 for max-thread-per-user.
<LI>Click OK on the child window and exit the parent window.
<LI>Reboot Digital Unix to implement the kernel changes.I have bkp OD, trash server.app / reboot / install server.app again and working fine now.
Thanks ! -
Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?
i have that quicktime problem too
-
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense. -
OEAP602 RLAN; print server fails to connect but laptop does
This AM I tested a 602 with a Lexmark print server patched to rlan (4) in house. It acquired its DHCP IP and functioned as expected.
upon delivery of the 602 and print server to remote site, the print server fails to get a IP..
Yes the 602 is alive and well but the WLC logs indicate:
*apfMsConnTask_2: Jul 31 14:54:42.937: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:379 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 00:20:00:96:f0:16.
In the past, supported bitrate for the rlan to work was 1 or 2 mbps. Current code 7.6.120.0 I believe has the little bug fixed as I have all rates below 11 disabled and my other 13 rlan clients are working fine.
any ideas?Error Message %APF-3-CHECK_SUPP_RATES_FAILED: Could not check supported rates.
[chars]. Length :[dec]. Mobile MAC: [hex]:[hex]:[hex]:[hex]:[hex]:[hex].
Explanation Could not check supported rates. Verify data rate on client.
Recommended Action No action is required.
The WLC was reading a message from the client, and the client did not tell the WLC what rates it could support. This could happen because the packet from the client wasn't heard fully. As well, some clients will see the WLC that they are associated to, and not the individual Device. In this case, it is possible that the client didnt' send the supported rates, as it didn't see a change in BSSID> -
In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
persists, restart Outlook."
The error log message details are as follow:
System
Provider
[ Name]
Microsoft Office 15 Alerts
EventID
300
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T15:54:49.000000000Z
EventRecordID
655
Channel
OAlerts
Computer
Computer-Name.domain.local
Security
EventData
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
301670
15.0.4420.1017
xyfc
0x8004011B
The system is as follows:
Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
OS: Windows 7 (64-Bit)
Application: Outlook 2013 (32-Bit)
The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
Any help would be greatly appreciated.I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved. -
An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How do I reinitialize the app?
Thank you again. Here's the console messages from trying to open iMovie and then opening the App Store. Clicking on the iMovie icon in App Store purchases and clicking on check for unfinished downloads:
8/28/14 4:56:26.743 PM Dock[214]: LSOpenFromURLSpec(file:///Applications/iMovie.app/) failed with -10699
8/28/14 4:56:47.878 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:56:47.879 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:57:50.201 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:57:50.201 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.745 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.745 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.824 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.824 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.847 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.847 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:36.276 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:36.276 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.448 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.448 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.449 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.449 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:55.996 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:55.996 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.021 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.022 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.051 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.052 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.342 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.342 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.425 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.425 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.508 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.508 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.518 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.519 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.696 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.696 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.808 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.808 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.826 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.827 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.838 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.839 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.843 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.843 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.857 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.857 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.893 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.894 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.907 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.907 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.923 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.924 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.969 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.970 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.039 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.039 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.045 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.045 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.145 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.145 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.231 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.231 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.249 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.249 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.293 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.293 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.350 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.350 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.352 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.353 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.400 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.400 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.402 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.402 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.814 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.814 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.932 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.932 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:00.697 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:26.564 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.565 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.660 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.660 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.840 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.840 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.864 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.864 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.984 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.984 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.069 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.069 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.079 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.079 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.083 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.084 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.385 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.385 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.389 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.390 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.391 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.391 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.435 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.436 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.443 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.443 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.479 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.479 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:31.036 PM acwebsecagent[127]: License : One or more of the License/Public Key can't be NULL
8/28/14 4:59:31.036 PM acwebsecagent[127]: SSLExt : Failed to get ScanSafe headers
8/28/14 4:59:31.036 PM acwebsecagent[127]: DownloadUpdatedConfig : Failed to download updated config. Host hostedconfig.scansafe.net. Code 0x80004005 -
Mail was unable to find your reply to the message ".....
I keep getting this message when I try to look for a reply from within mail by clicking on the reply arrow in the inbox that shows I've replied to the message:
"Mail was unable to find your reply to the message "...." You may have deleted the message."
https://skitch.com/jasondebruler/rshsf/mail
This only happens when looking for sent items from my Exchange account. The feature works correctly on all of my gmail accounts.
I have verified in the preferences that this account is set up (box is checked) to properly "Store sent messages on the server".
Any insight would be appreciated. Thanks!Cheers for that. Yes they match, the sent folders are the same both locally and on the web interface. They both updating almost instantly when i send something.
The problem is when replying, although both sent folder views contain the sent item, the little reply arrow cannot link to replied sent item. I have attached an image of the message:
http://gallery.me.com/martinwhiting#100231/b&bgcolor=black
Maybe you are looking for
-
Printing from InDesign - black lines
Good afternoon all, I've started using InDesign CS6 at work to produce advertising catalogues. I've hit a bit of a wall when I print it and would like a bit of help to try and solve my issue(s). I have a booklet set up to print 4 pages of A4 on to do
-
We need to upgrade from Leopard to Snow Leopard and then on up the chain. How?
We have an old MacBook running Leopard (10.5.8). Can we upgrade to Snow Leopard and then add others gradually untill we get to the newest version? If so, were can we find a copy of Snow Leopard?
-
CS4 will not remember panel location
I am having a problem with PS CS4, installed in Windows 7 (64), not remembering my panel locations. I have to click on "My Space" (Custom setup) to reset to my preferences. Yes, I do have checked "Remember Panel Locations" in Preferences-General. I d
-
How can i find out what country my computer was purchased?
I got my computer as a gift and the gifter is no longer available. I called the HP Americas support center, but because my notebook was bought outside of the Americas they can't tell me anything about my computer, including what country was sold even
-
Hello, I'm trying to find if the TNS lister is running corrrectly? If I run command: lsnrctl status The result is: =========================================== LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 10-MAR-2006 10:52:12 Copyrig