Unable to print the TDS certificates

Dear all,
I am running j1inmis(tds process) this year(2008 to 2009) instead of lost year(2007 to 2008).
I have done challana update status and bank challan update status.
i was unable to print the tds certificates.
could you update ur valuable  inputs
Regards
Raju.k

Dear all,
Thanks for early response.
I have given everything correctly.
My question is
Is it possible to run previous year process in this year?
Could you please update your valuable inputs.
Regards
Raju.k

Similar Messages

  • Reprinting of the TDS Certificate

    Dear All
    I am unable to reprint the TDS certificate. Kindly help me to proceed further. Is there is any settings to be done for reprint of the certificate.
    Whether I have to cancel the original certificate & then to reprint the same or I have to directly reprint the certificate.
    Thanks
    R.Karthigayan

    Hello
    Assume there have changes in TDS and hence you would like to reprint the TDS.
    For the same TDS, you could re print from the print options and the number would be same.
    Check these notes:
    946964 -J1INCERT/J1INREP:Certificate printing and re-printing issues
    948171- J1INCERT in background - Certificate Number is not printed
    Reg

  • Reg the TDS certificate in Document Currency

    Dear All
    I want to print TDS certificate in Document Currency.
    I had posted a Document to a vendor in USD. My company code currency is INR.
    I want to print the TDS certificate in USD instead of INR. Is it possible to do the same.
    Regards
    R.Karthigayan

    Hi,
    Procedure for creating tax type and tax code is same as 194c,194j ...
    Whatever the tax types and tax codes are created are assigned to vendor master by using t.code: xk02
    No special configuration is required.
    regards
    Prasad

  • Unable to print the report after SP2 (CR 2008 / VS 2008)?

    I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
    I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
    After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
    I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
    The problem didn't go away and I faced one more problem.
    Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
    After I do some more testing regarding my issue I found out the following
    1.     When I add a new report to my web application and I don't change the page setting the report work fine.
    2.     When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
    Why I don't know?
    Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
    All of the above issues happened with me after installing SP2.
    OS: WindowsXP Pro SP3
    CR 2008 (SP 0, 1, 2)
    VS 2008 SP1
    Please I need your help.
    Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
    Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

    Hi, Sami;
    Are you printing from the Crystal preview window, or in code?
    If you are printing from the preview window, try printing via code, such as:
    An example of print to printer:
    crReportDocument = New ReportDocument
    crReportDocument.Load("h:\labels2.rpt")
    ''Use error handling in case an error occurs
    Try
    ''Set the printer name to print the report to. By default the sample
    ''report does not have a defult printer specified. This will tell the
    ''engine to use the specified printer to print the report. Print out
    ''a test page (from Printer properties) to get the correct value.
    crReportDocument.PrintOptions.PrinterName = "
    dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
    ''Start the printing process. Provide details of the print job
    ''using the arguments.
    crReportDocument.PrintToPrinter(1, True, 1, 1)
    Please post your question about the dataset as a new post.
    Regards,
    Jonathan
    Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

  • Office Web Apps - Office Web Apps was unable to find the specified certificate

    Hello,
    Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this.  With that said, here's my issue...
    I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx  Since this is a test environment, I'm planning on using a self-signed
    cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.  
    I created the cert using the following command:
    New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
    I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert".  I then proceeded to try and create the OWA farm by running:
    New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
    This produces the following error:
    New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
    At line:1 char:1
    + New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
    + FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
    What gives?  

    Hi Waqas
    Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
    Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
    Issue #3 in the above blog link does not reflect the same error I see on my servers.
    I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
    Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
    If you added domains to the Allow List by using the
    New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
    the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
    New-OfficeWebAppsHost cmdlet.
    I have not added any domains to the Allow list so this did not help either. Should I add the domain?
    Any further help with this is much appreciated.
    Thanks again.
    Yoshi

  • Unable to print the document thru Crystal Integration

    Hi All,
    Could anybody help me on the issue given below.
    One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
    Thanks,
    Vishwanath

    Hi,
    Please try to post in the Integration forum have some answers there.
    Regards,
    Clint

  • Unable to print the entire document, how do I print the entire document?

    Unable to print the entire document, how can I fix this and get the entire document printed?

    Please provide some details; without it, nobody can possibly answer your question.

  • Still after 1 week I am unable to print the HP Crossword Puzzle. When will this be resolved?

    After more than 1 week of attempting I am still unable to print the HP Crossword daily puzzle. What is going on with the fix???

    Hello Chowguy,
    I hope you are not having this issue anymore.  An update came out in the middle of May that should have fixed this issue.  If you are still having a problem, let me know and I will see what I can do to help.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Unable to print the report in second page

    Hi,
    I've got a problem in the report. Here In a report, I'm able to print the report's data in the first page only. I'm unable to print it in the second page,third page etc.
    To rectify the problem, I've selected all the fields and set their property "Print Object on" to All pages. Still the problem exists.
    Thanks in advance.
    Regards,

    What exactly do you mean by 'unable' ? Do you only get a 1 page report, OR do you get multiple pages with the 2nd, 3rd blank OR do the 2nd, 3rd have text but not data OR something else?
    "Print Object On" should be "First Page" - it sounds wrong but it's talking about logical pages (which may be multiple physical pages).

  • Unable to print the SQR report to printer

    Hi-
    Trying to print the PAY003 SQR directly to the printer, SQR report runs sucessfully but not able to print to the server, Its working correctly in 9.0 Production instance with Windows 2003 32bit OS, but doesn't work with HR92 Applicaiton on Windows 2008 x64 bit servers.
    Error Message : "The SQR report was generated, but the program was unable to route the report to the printer. Verify the validity of the printer path specified."
    Installed the printer on the new 2008 Windows server with 64 bit drivers and still it doesn't work. Any help or suggestions what to check ?
    Regards,

    If you are using the Verizon Web-mail client here on My Verizon, then you need to click the "Print" button while viewing a message.
    Click here for an illustration showing the button you need to click. Look towards the top right of the image.
    When you click that button, a new window will be displayed and the Print dialog will open. Simply hit the new Print button to print the full email.

  • Unable to import the user certificate into the Oracle Wallet Manager

    Hi,
    I am configuring the External Authentication plugin using the password filters.
    i am using the version 10.1.0.5.0 version of Oracle Wallet manager
    inorder to do that i am enabling the SSL mode.
    to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
    when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
    User Certificate Installation failed.
    Possible errors:
    - Input was not a valid certificate
    - No matching certificate request found
    - CA certificate needed for certificate chain not found.
    Please install it first
    can anyone help me how to resolve this problem.

    hi,
    thanks for your reply pramod
    I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
    what may be the problem.

  • I am unable to print the full content of a text box within a PDF that was emailed to me - help!

    I open the pdf in Adobe Reader, and can see all of the content on screen by scrolling within the text boxes. But, because the content is "bigger" than the text box in some cases, when I print the pdf, the text gets truncated. Can I print in a way that allows me to see all text that the user entered?
    Thanks in advance for any guidance.

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • Unable to print the adobe form Genrated by webdynpro

    Hi Experts,
    I have generated a adobe form using webdynpro Java. It sucessfully loading the adobe form in the browser but when I click print button above the form. It just opens acorbat reader console and doesnt print the form.
    Is there any additional settign to be made to acheive it.
    we are using WAS 7.0 and acrobat reader 8.0
    Your suggestions are highly apprecited.
    Thanks,
    Raj

    Hi Raj,
    Try this out. You can put the print button in the Form itself.
    Go to Library -> Standrad -> Print Button
    Drag the print button on to the form.
    Try printing the form by clicking on the print button.
    Cheers
    Satya

  • Printing the salary certificate in row wise

    hi gurus,
    i have developed a custom report for printing the salary details( basic,pf,hra ) as column wise how to do this as row wise..
    like this..
    basic  ---
    pf   ......
    hra .....
    how to do this ..

    Hi,
    You can create two boxes in adobe form setting properties of one as Bold and other box as non-bold.
    Then based on the value you can hide the box and make visible the other one.
    You have to choose the right event like change or exit ( if the value is got from user ) or
    during form load event if the value is passed dynamically to form.
    regards

  • Unable to print the reports from Transaction iViews

    Hi Experts,
    We have configured SAP Transctions iViews in portal. These transactions are basically of reports, when we want to print the report from EP. When clicking on the Print from the Transaction iView we are getting the error "File does not begin with '%PDF".
    iView launches in HTML Gui.
    When we launch the same report from ECC directly login with GUI we are able to take the print.
    Is there any settings need to be maintain in "FRONTEND_PRINT" service.
    Thanks
    Murthy

    Hi,
    Check the note Note 1042424 - Printing in WebGUI: Error "File does not begin with '%PDF-'"
    This should help resolve the problem.
    Cheers-
    Pramod

Maybe you are looking for