Unable to print with Epson 3880 in LR3

I am no longer able to print with LR3 on my Epson 3880. I have printed lots of photos on it in the past and when I have tried to print on it in the last few weeks, I go through the normal process on my Mac Pro with Snow Leopard (10.6.8) and everything appears normal. LR3 processes the photos and the Epson Icon pops up on my task bar and it shows the job as having been completed - but nothing prints. The computer believes that it has successfully printed my photos.
I have tried deleting and adding the printer, but that has not helped. I have also tested my connection through the Epson Status Monitor. I can print a test page with that utility and check for the need to clean the print head. The computer appears to be able to talk to the printer, but it won't print photos.
One other thing that appears a little unusual is that I can select a specific colour profile to use for my specific photo paper, but I can no longer find the setting in the printer driver that states 'Turn Off Colour Management'.
I have checked the software update twice and I have the latest updates installed.
I am stuck and need to print some photos for family. Any suggestions are appreciated!
Don

That is a good tip Andrew. I believe that the driver was updated in the last couple of months and as I am not printing on a regular schedule, I didn't notice the problem. With the fresh install from the Epson site, everything looks the way it should.
I am going to follow your advice and not update via Software Update. I will install directly from Epson. This is the first time in three and a half years on the Mac that I have had an issue like this.
Thanks,
Don

Similar Messages

Elements 9 printing problems with epson 3880

HI All:
Elements was working fine with epson 3880.
Problems developed:
1. Would print color pics in black and white only while in Editor; color pics printed ok in Organizer
2. Now Print Preview does not work in either Editor or Organizer
3. Now cannot print in either Editor or Organizer
I purchased Elements online. I do not have a CD for reinstall.
Any help would be appreciated.

I am having a similar problem that seems the reverse of yours in a way, though it may be related. Mine occurred only with the disk-installed version, not the downloaded trial version, and it was present from the start on my iMac. Everything worked fine with the 3880 and 2400 printing from the trial version of PSE9 (downloaded), just as it had with PSE8. CS5 and Apple Aperture are also installed and had been working normally. Then I received the install disk for PSE9 and installed it. After that, Preview did not produce a preview, PDF did not produce a PDF, and Print did not produce a print. CS5 also would not preview or print after that. Aperture, however, was unaffected. Some experimentation revealed that the problem occurred only with "Photoshop Elements Manages Color" selected and printer color management turned off. With "Printer Manages Color" selected, it printed.
I uninstalled both CS5 and PSE9 and reinstalled 8, which once again worked properly. Hoping there had been an install error as the cause of the problem with the original installation of 9, I then uninstalled 8 and reinstalled 9, and the problem recurred. So it's back to PSE8, and try to figure out how to call the problem to Adobe's attention without paying for a tech support session. Interesting that a glitch that causes a problem with PSE's printing can also affect PS's printing.
I suspect your problem is related to mine. Do you use a Mac? I think the reason the problem didn't occur at first with my system is that the trial installation is not the same as the paid one, if only because the trial version doesn't have the user sign up with Photoshop.com or whatever it is, which I had never done until I installed 9 from the disk. So it seems that something in the full, purchased version is causing the glitch. I have no idea why your version should have worked at first, then crumped.
Two more things I'm going to do now: reinstall CS5 on the iMac (should be OK, as it was before I got 9), and install 9 on my laptop to see what happens.
My advice for now is to download the trial version of 9, uninstall the current installation of 9, install the downloaded trial version, and (without entering the serial # from your downloaded version) see if it works properly. Then contact tech support. Especially if you have a Mac, tell them you have heard from others who have related the same problem to you.
—howard

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Printing Borderless in Lightroom 3 with Epson 3880

Hello everyone,
I'm having a tough time printing border less photos with my new Epson 3880 printer through Lightroom 3. I want to print a single image borderless.I set my printer driver for borderless (4x6 borerless retain size), then in the Print Module I make sure that my cell size is as big as my paper (4x6) and have all margins set to "0". It all looks great in the preview in LR, yet what I see on my screen is not what I get on the print. Usually it will have a white border, and sometimes it will have a white border and my photo will be cropped either form the left or the right. What am I doing wrong?

Yeah, this should be a very, very simple thing (even the most embarrassingly rudimentary photo programs do it as a basic function), but alas, it isn't. I use LR3 to process about 200-300 images a week. But if my wife wants a simple 4x6 print of a picture, I have to use Windows Picture Viewer. I went through two packages of 8x10 paper when I bought the program trying to accomplish this laughably basic task (maybe we don't always WANT to physically crop/mat the photos we print, Adobe); I nearly threw my printerS (yeah, I tried with two of them) out the window. Your description of the problem--the over cropping, the arbitrarily asymmetrical borders--are dead on. Great program, but god, is that a pain in the ***.

HT204135 Photoshop CS5 Printing Problem on iMac with Epson 3880 printer

All of a sudden I can't print from Photoshop CS5 on my iMac with OSX Mountain Lion installed. I am able to print from Illustrator, however. Have tried to update the Epson 3880 driver. After clicking on "Print", it doesn't register with the computer, and from then on, the "Print" option is greyed out.

Are you using moab icc profiles or are you using one of the epson profiles?
I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
Hope so
Tom

Color cast when printing from Lightroom with Epson 3880 printer

Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast.
WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync.
I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
I need help!

Are you using moab icc profiles or are you using one of the epson profiles?
I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
Hope so
Tom

Printer Error - Epson 3880 & LR and talking with each other?

I am trying to use the Epson 3880 with LR; however, I get a printer error every time I try to print. The error shows up in the printer status and is immediate.
The printer works fine with iPhoto.
It is connected and the Utility is speaking with printer.
I have downloaded the most recent drivers (which haven't been updated by Epson in awhile.)
I have the color being managed by the printer.
What else could it be?
I am very new to this and could use some help.
Thank you in advance.

I suppose that can’t hurt to reinstall.
Do you have a 2nd machine you can try as well?
One thing you might try is logging in as another user and seeing if you can print. IF so, then there’s something in the original log-in Library that’s an issue. I think (I’m not sure) that the driver should be accessible for all users. If however, you can’t print as another user, then its something in the main system that’s at fault here.
You could also try resetting CUPs (the printer system) if you feel comfortable in Terminal. In Terminal type:
sudo cupsd

Unable to Print to Epson printers using LPD on PPC, works on Intel

After updating to Leopard, I am unable to print to my network printer Epson 870 and CX6400 from my G5 Imac. Everything worked fine with Mac OS 10.4.x. It works from my MacBook running Leopard. I am unable to select (even using browse) the appropriate Gutenprint V.5.1.3 driver. It fails to output to print server. From my MacBook all my network printer works - Samsung ML-1710, Epson 870 and CX6400. From the PPC Imac, only the Samsung works.
If I share the printer from the MacBook, the iMac sees the printers and automatically selects the appropriate Gutenprint driver. I am using IPD. I also tried Window. I can not select the Gutenprint drivers. For the 870, I tried selecting Epson Stylus Color and Photo series 1.3 and Epson CX6000 series driver.
I've reloaded the drivers from Apple and also tried Epson's drivers. I haven't tried loading the standard (non-Apple) gutenprint drivers.
Any help will be greatly appreciated. Thanks.
Al

I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
I hope this helps.

Unable to print to Epson SP870

I upgraded yesterday from iPhoto 4.0.3 to iPhoto 6.0.6 on my Powerbook running OS X 10.3.9. Nothing else changed on my computer except, of course, the simultaneous installation of the other iLife 06 applications (which I don't use; in fact I immediately deleted GarageBand and all its ancillary files).
iPhoto 6 completely refuses to send any print job to my Epson Stylus Photo 870. I can save my iPhoto pages as PDF files from the Print dialog box, then print them without any trouble from Adobe Reader or Preview, but I can't print anything at all from iP 6. There is no sign that anything is ever queued for printing: the Stylus Photo 870 print job status window that opens whenever I print from any other application never opens when I try to print from iP 6, and no error message or other signal of any kind appears. The print job just silently vanishes into the Twilight Zone.
I see there have been several other posts here from people who are unable to print to various Epson printers from iP 6, and none of those posts has drawn any reply. I hope this one will fare better.
After upgrading iPhoto, I repaired permissions, applied the update to 6.0.6, repaired permissions again, upgraded all ten of my iPhoto 4 Libraries, familiarized myself with iP 6's preferences, and worked with it for a while before I tried for the first time this morning to print anything. The printer has the latest Epson driver, and it prints normally from every other application I've tried, exactly as it did before I upgraded iLife.
Any ideas? Any further information you'd like me to supply?

eww,
...in fact I immediately deleted GarageBand and all its ancillary files...
I'm surprised your iPhoto will run at all. This is a common cause of iPhoto 6 having unexpected quits and crashes. I recommend that you re-install GarageBand. TD says that you don't need all the loops, just the application. This could be the cause of your printing trouble, although I've not seen this to be the case for anyone else.
I'm not familiar with your exact model of Epson. I have an Epson Stylus Photo RX620 and did experience an issue where the print job appears to start, gets as far as charging the ink, then stops with no explanation. It only did this from iPhoto; other apps were not affected.
Some threads in which this was discussed, with various Epson models:
http://discussions.apple.com/thread.jspa?messageID=3955908
http://discussions.apple.com/thread.jspa?threadID=832759
http://discussions.apple.com/thread.jspa?messageID=4171156
Have you deleted the iPhoto plist file? That fixed it for one poster.
For me, the issue was resolved after I opened the ColorSync Utility and ran its First Aid Repair.
If you open the Print Monitor window before selecting Print, do you see any response?
Regards.

Difficulty Printing Borderless Prints with Epson C84

When I had an iMac G3 with OS 9.2 and used the Epson menu for printing, I had no difficulty printing 4x6 inch borderless prints (since that is one of the options on the Epson Menu). But now that I am forced to use the OS 10 printing menu, even when I identify the printer as an Epson C84, crop the photos to fit a 4x6 page and show "0" margins on all sides when selecting 4x6 as paper size, using either iPhoto or Photoshop Elements 3.0, the prints come out with a small white border on all four sides. The Apple Menu with Epson as the chosen printer does not give me an option that says "4 x 6 borderless" when choosing the paper size. Is there something I need to set differently in order to get borderless prints?
hk Jones

I also had a problem finding the "Borderless" option in the print dialogue. Here's what Epson Support told me to do -- It worked perfectly. I can now print borderless from either of the two macs sharing my Epson 1280.
To correct the issue you are experiencing, we will perform a complete
removal of the files and reinstall the driver.
REMOVE FILES
1. Double click on the MAC HARD DRIVE
2. Double click on the LIBRARY folder
3. Double click on the PRINTERS folder
4. Drag the EPSON folder to the trash can
NOTE If you receive an access denied error message, this indicates that
you do not have root access. You will need to contact Apple for assistance
on obtaining Root Access.
1. Insert your 10.4 CD/DVD, double click on the CD/DVD icon on your
desktop.
2. Double click SYSTEM > INSTALLATION > PACKAGES > EPSON PRINTER
DRIVERS.PKG
Follow the prompts for the installation, restart your Mac when complete
Please follow the steps below to install the resident driver for your
printer in OS 10.4:
1. Make sure that your printer is turned on and connected to your computer.
2. Open your PRINTER SETUP UTILITY. This is found in HARD DRIVE,
APPLICATIONS, UTILITIES directory
3. If there are any entries for your printer click on them and hit the
DELETE. Once they are all gone Click ADD, then MORE PRINTERS at the bottom
of the printer browser.
4. In the window that appears, select EPSON USB from the drop-down menu at
the top, then highlight your printer when it appears under NAME , under
PAGE SETUP select ALL, and then hit ADD.
5. Quit out of the printer setup utility and try printing from any OS X
application.
To set up your printer for borderless printing in OS X please follow the
steps below.
After you have installed your printer driver for OS 10, you will need to do
the following to add extra paper features such as borderless printing
options:
1. Go to Printer Setup Utility (found in HD > Applications > Utilities).
Delete any existing references to the Epson printer from the list.
2. Go to Add. Select Epson USB for a USB printer or Epson Firewire for a
Firewire-connected printer.
3. Highlight the printer name when it appears under Product. Under "Page
setup" use the up-down arrows and select ALL.
4. Click Add. The new printer options will now be added to the Printer
list; you will see the printer name numerous times with different paper
selections attached. (If you are unable to see the full description you
will need to extend the name category.)
5. Highlight the printer name/feature which you wish to use (For example,
"Stylus Photo 2200 (Sheet feeder-Borderless)") and make it the default.
Close Printer Setup Utility.
6. Ensure Classic is not running. Open an OS X application and the file you
wish to print.
Setting up borderless prints in an OS X application (NOTE: not all
applications will show these options)
1. Click on FILE and PAGE SETUP. Ensure the settings below are adjusted:
SETTINGS: PAGE ATTRIBUTES
FORMAT FOR: EPSON STYLUS XXX XXX(BORDERLESS)
PAPER SIZE: Whichever compatible paper size you wish to use
(NOTE: borderless printing is not supported on custom paper sizes.)
Click OK when done.
2. Click on FILE and PRINT. Ensure the settings below are adjusted:
PRINTER: Stylus XXX XXX(BORDERLESS)
PRESETS: STANDARD
Make any other adjustments needed (on COPIES and PAGES, PRINT SETTINGS,
etc) and then click PRINT.

Photosmart c410 unable to print with Mavericks 10.9.3

up until the latest Mac OS X update (10.9.3 out May 25th 2014), i was able to print (wireless) without incedent. But since that update, i've been unable to print to that printer. My wife's HP laptop (running windows 8.1) prints fine to the printer (HP Photosmart c410). My Macbook Air recognizes the printer and connects without problem but when i go to print, the printer shows "printing...printer in use" but does not awaken the printer.
i have no issue printing to my Epson Artisan 810 so suspect the problem lies with a specific driver issue between 10.9.3 and the HP PS c410. any ideas? (i've deleated and re-added the printer but no change).

Hi Zedman435,
Only having the AirPrint driver tells me that there is something missing. Please complete the steps below.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and download and install the HP Printer Drivers for OS X.
Now when you add the printer, you should have the HP driver to choose, do not select the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know how this works out. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trouble Printing with Epson RX700

Loaded 10.6 and new Epson drivers. Rx700 has front and back paper trays. Word and Excel printed to the front try, but Safari would only print to back try, regardless of setting. 10.6.1 allowed me to print to front tray, but it seems like the system default is to the rear, regardless of how setup is set. Even if setup says the front tray is selected, you must still select it again when printing, or documents are sent to back. Epson says it's an Apple issue. Anyone solved this problem?

Same issues here on my MacPro Tower running Snow Leopard 10.6.2. Wasted several hours on the phone with Epson. Their tech support for Apple Mac has gone downhill in the past several years. I've owned about FIVE Epson inkjets, so I know. Phone support is outsourced to some other country, after wasting an hour on a horrible connection to who knows where, the level #1 tech support finally gave me tech level #2, who was more aware of the driver issues, to which I suggested they all SHARE their notes so as NOT to waste anyone else's time.
First sign of DUMB, is the supposed "Snow Leopard" combo driver package offered on the Epson site. Listed as 70 mb's, it's less then 50 mb's, misinformation begins. Look closely ALL the packages are simply the drivers and scanner apps from 2-3 years ago, those ones worked under TIGER OS, and are certainly NOT updated for Snow Leopard. Now let's get really DUMB, and when you mount the "combo" disk image, you find a package installer that is a PPC app! The online docs say this updater is for you "INTEL" mac. Granted some PPC apps will run, this one for me was a HUGE problem. Opening multiple windows, unable to even click in the duplicate boxes to type my password to proceed. Why Epson is still using VISE installers that were horrible under OS9, terrible under TIGER, is beyond me. This combo package offers NO choices and begins to install the outdated freebie software from Epson, when what I wanted to do was upgrade the print drivers.
So heres the deal, you can D/L the OLD 3.01 drivers separately from the same site page, but ALL the real print options are "crossed out", which means to me, NOT compatible, and rendering the EXPENSIVE RX700 printer USELESS.
So I ended up downloading the Apple Epson drivers using "Software Update". Now you end up with driver version 8.0.7. This stumped the wonderful Epson support staff, since they said they don't write the "apple epson drivers", but this driver gives you back the drop down for the actual printer settings. And the phone techie ended up putting me on hold about four times, and then said she was told I should stick to that driver by someone higher up in support. Go figure, the Apple driver is better, but the BUG reported here, is making it less then ideal.
If I try to print out a photo in Preview, the printer gives me the error message "No Paper in Back". I have to DELETE the print job and most of the time restart the printer as well. Epson had NO clue about it, and since Snow Leopard has been out for sometime I don't expect much relief, though I do urge folks to call them and report it otherwise we may NEVER see another driver as they are still pushing the several years old ones we had before. Not sure I'll buy anymore Epson printers, they mostly cater to the Windows buyers now, just like Sony. Epson Tech support phone number: 562-276-4382. Good luck to all, we'll need it.

Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
I'm having this problem on both my iMac and my MacBook Pro.
I get errors like:
"unable to write pirnt data broken pipe"
"unable to send data to printer"
"printer not connected"
I've been reading responses to others with similiar issues and I've tried
deleting and re-adding my printer.
reseting my printing system
Installing Guenprint.
re-adding my pirnter with a generic PCL driver.
None seem to correct the problem.
This problem happens both when connected directoy with USB and when connected through the network.
I have no problem printing with my work (Wondows) laptop.
Any help would be appreciated.

Thanks, a brody.
Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
I thought the issue may have been resolved.
I was finally able to print my bank statement on both the iMac and MacBook.
Today, I'm back to the the same issues.
Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
In my mind, it's pointing more and more towards a hardware issue.

Unable to print with Adobe Acrobat Pro - latest version 10.1.10

Hi,
I have installed Adobe Acrobat Pro on my mac book air version 10.9.2. but am unable to print. When I print a PDF, it shows up in the printer icon as complete but when I go to the printer, nothing is there? Can someone help?

Hi Frank,
This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
Does this issue occur with that specific pdf or with other pdfs too?
How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
Regards,
Rahul

Unable to print with Epson 3880 in LR3

Similar Messages

Maybe you are looking for