Unable to properly display Korean/Chinese in Premiere CS4

I am currently using an English version of Premiere CS4. I've been editing videos and I need to use both Korean and Chinese text, but unlike the successful usage of Japanese text, I can't make it work in Premiere.
Like my Japanese text editing, I'm simply copying and pasting from an email - so my PC can display the fonts, I just can't use them in Premiere.
I also can't figure out if it's a unicode thing, I don't see unicode fonts available for selection.
All I see for both Chinese and Korean are small boxes.
Any advice?

There are some fonts that Titler will just not display properly. It is the most finicky of all Adobe programs, that use fonts. A recent post involved Isabella and also Isabelle. In that case, the poster was able to replace both versions that she had with another foundry's version. That solved her issue. BTW, I could use both of these TTF versions in PS, AI and InDesign, with not one issue - Titler just would not display them.
Similar happened with Japanese fonts in CS3, and the upshot was that another Japanese font had to be found. This one did work fine in the OP's case. There, the problem fonts were TTF, and OTF versions worked perfectly once installed.
You might want to research the foundry for both of your problem fonts. If it's someone like Adobe, you might wish to see if they have those fonts in OTF, should they be in TTF, or even PS.
Jim's suggestion of making sure that all formatting is clean is also a very good one.
Good luck,
Hunt

Similar Messages

  • Dreamweaver CS5 unable to properly display BridgeCS5 HTML gallery's second page and all others

    HI!I would really appreciate your help in solving this.
    Here is the link:http://www.roulasorour.com/drawing1.html
    As you can see ,only the first page of the gallery displays properly .
    But when you press on next you get the following message:
    Error 404 - Not found
    Your browser can't find the document corresponding to the URL you typed in.
    BTW the whole bridge HTML gallery displays just perfectly well in the browser
    Any help would be greatly appreciated!
    MAc OSX vers. 10.7.2
    Safari 5.1.2
    many thanks!

    IT's ok I solved it:)
    IT was pointing to teh wrong folder!an older incomplete gallery
    tks anyway

  • Problem with display of Chinese, Japanese, and Korean business partner name

    Hi All,
    I'm trying to understand how to get GTS to properly display the names of the business partners that are in Chinese, Japanese, or Korean.
    I have set my SAP gui localization as follows:
    - Select the Customize Local Layout, then Options, then the |18N tab,
    and check the Activate Multibyte Function box
    - Select the Customize Local Layout, then Character Set and check
    Unicode and Simplified Chinese
    In the source R/3 system for these partners, if I set my localization to the right language, the business partner's name and address would be displayed correctly in the C/J/K character sets when I select the appropriate version in International Version of the address.
    However, in GTS these names/addresses would just appear as nonsensical characters (like "·ÉÀûÆÖÕÕÃ÷µç×Ó£¨ÉϺ££©ÓÐÏÞ¹«Ë¾").
    For example, if I do a look up of a known Chinese BP by number, in the seach results window the Description field of that BP would just be garbage, but if I put the cursor over the Description field, then the correct Chinese display (matching what is in R/3) would appear for as long as the cursor is over that field. This indicates that the data was transferred correctly from R/3 to GTS, but some how the display does not default to the right character set.
    If I select that record, the resulting detailed display would also have garbage as the Name and Address. However, here putting the cursor over the fields still do not bring up the correct character displays, and I have found no way to get the correct displays to appear.
    Does any one know of a way to get the displays to show correctly in GTS?
    And can anyone explain why putting the cursor over the Description (in the BP search results window) would let the correct display pop up?
    Greatly appreciate any insight anyone can provide.
    Thanks,
    Rex

    Hi Rex - As per message - this looks to be an issue for BC-I18-UNI and not the GTS application:
    For general information purposes - last response from BC-I18-UNI development via oss message:
    "However, from readind the message, I believe I understood the reason for
    the described effect. I assume GGT is a non-Unicode system? If yes, this
    is my idea:
    The data stored in the BP tables, e.g. for number 2555442 have been
    entred manually, probably within a session using English as logon
    language. In this case the data are stored with a Latin-1 codepage. This
    means the stored data are actually Latin-1 data, not Chinese. By
    switching the font at front-end side to Chinese, the characters appear
    as correct Chinese, although they are still Latin-1.
    It is possible that different GUI components show different effects in
    this context, as the internal font switching mechanisms behave a bit
    different in different components, e.g. control based components are
    different from normal Dynpro-based fields.
    To have correct Chinese data, you need to logon with language Chinese.
    This holds for all non-Unicode systems. On Unicode systems, the logon
    language is arbitrary."

  • MS Notepad unable to display the Chinese characters I type and display them as squares

    MS Notepad is unable to display the Chinese characters I type and display them as squares. But when I copy those squares on notepad to Wordpad or MS Word, they display the Chinese characters just fine. I've no idea why those Chinese characters I type can't display properly on notepad. I check the font of the notepad and it's the default. I've another Windows Vista desktop computer which has notepad of the similar setting and display Chinese characters just fine. Both are using Chinese (Simplified) - Microsoft Pinyin New Experience Input Style to input those characters. But I don't understand why my Windows 7 is facing this problem.

    Hi,
    Notepad is a very simple text editor BUT it will work if you use the SAME language in Windows. Please try:
    1. go to control panel, click "Clock, Language, and Region"
    2. click "Change location" under the "Region" section
    3. go to the "administrative" tab, then click "change system locale...", then select "Chinese".
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • The "blue bar" no longer properly displays Chinese characters.

    I recently updated my Adobe Reader from 7 to 9.4, and since doing so, Firefox no longer displays Chinese characters in the title bar. Instead, I now only see question marks.
    I've added Chinese to the preferred languages and also tried switching the browser's text to Unicode, but neither of these has made a difference.
    It's certainly a minor issue, but if anyone knows what to do, I'd greatly appreciate the help!
    Thanks!

    A possible cause is that Firefox has a problem with the (system) font that is used to display the Chinese characters on the title bar.
    Were any new fonts installed recently?
    You can try to use the system file checker to see if there are any problems with font files.
    See Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  • [SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

    Radeon HD 7790 + Catalyst = Error: unable to open display (null)
    Greetings,
    I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
    I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint)  worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
    I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
    Versions:
    Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
    Catalyst: 14.4-10
    Xorg: 1.14.5-11
    Logs&Configs:
    lsmod
    fglrx 8672295 0
    amd_iommu_v2 7174 1 fglrx
    button 4765 1 fglrx
    fglrxinfo
    Error: unable to open display (null)
    Xorg.0.conf
    [ 2632.576]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 2632.594] X Protocol Version 11, Revision 0
    [ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
    [ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
    [ 2632.619] Build Date: 08 January 2014 01:35:51PM
    [ 2632.629]
    [ 2632.635] Current version of pixman: 0.32.4
    [ 2632.646] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
    [ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2632.690] (==) ServerLayout "aticonfig Layout"
    [ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2632.690] (==) Automatically adding devices
    [ 2632.690] (==) Automatically enabling devices
    [ 2632.690] (==) Automatically adding GPU devices
    [ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2632.690] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2632.690] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2632.690] (II) Loader magic: 0x7fac20
    [ 2632.690] (II) Module ABI versions:
    [ 2632.690] X.Org ANSI C Emulation: 0.4
    [ 2632.690] X.Org Video Driver: 14.1
    [ 2632.690] X.Org XInput driver : 19.1
    [ 2632.691] X.Org Server Extension : 7.0
    [ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    [ 2632.698] Initializing built-in extension Generic Event Extension
    [ 2632.704] Initializing built-in extension SHAPE
    [ 2632.710] Initializing built-in extension MIT-SHM
    [ 2632.717] Initializing built-in extension XInputExtension
    [ 2632.723] Initializing built-in extension XTEST
    [ 2632.728] Initializing built-in extension BIG-REQUESTS
    [ 2632.734] Initializing built-in extension SYNC
    [ 2632.740] Initializing built-in extension XKEYBOARD
    [ 2632.745] Initializing built-in extension XC-MISC
    [ 2632.751] Initializing built-in extension SECURITY
    [ 2632.756] Initializing built-in extension XINERAMA
    [ 2632.761] Initializing built-in extension XFIXES
    [ 2632.767] Initializing built-in extension RENDER
    [ 2632.772] Initializing built-in extension RANDR
    [ 2632.777] Initializing built-in extension COMPOSITE
    [ 2632.782] Initializing built-in extension DAMAGE
    [ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2632.792] Initializing built-in extension DOUBLE-BUFFER
    [ 2632.797] Initializing built-in extension RECORD
    [ 2632.802] Initializing built-in extension DPMS
    [ 2632.806] Initializing built-in extension X-Resource
    [ 2632.811] Initializing built-in extension XVideo
    [ 2632.816] Initializing built-in extension XVideo-MotionCompensation
    [ 2632.821] Initializing built-in extension XFree86-VidModeExtension
    [ 2632.825] Initializing built-in extension XFree86-DGA
    [ 2632.830] Initializing built-in extension XFree86-DRI
    [ 2632.834] Initializing built-in extension DRI2
    [ 2632.834] (II) "glx" will be loaded by default.
    [ 2632.834] (II) LoadModule: "glx"
    [ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2632.835] compiled for 6.9.0, module version = 1.0.0
    [ 2632.839] Loading extension GLX
    [ 2632.839] (II) LoadModule: "fglrx"
    [ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] Module class: X.Org Video Driver
    [ 2632.863] (II) Loading sub module "fglrxdrm"
    [ 2632.863] (II) LoadModule: "fglrxdrm"
    [ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
    [ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
    [ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
    [ 2632.864] (--) using VT number 2
    [ 2632.885] (WW) Falling back to old probe method for fglrx
    [ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.901] ukiOpenDevice: open result is 11, (OK)
    [ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
    [ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
    [ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
    [ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
    [ 2632.905] (II) Loading sub module "vgahw"
    [ 2632.905] (II) LoadModule: "vgahw"
    [ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2632.906] compiled for 1.14.5, module version = 0.1.0
    [ 2632.906] ABI class: X.Org Video Driver, version 14.1
    [ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2632.906] (==) fglrx(0): Default visual is TrueColor
    [ 2632.906] (**) fglrx(0): Option "DPMS" "true"
    [ 2632.906] (==) fglrx(0): RGB weight 888
    [ 2632.906] (II) fglrx(0): Using 8 bits per RGB
    [ 2632.906] (==) fglrx(0): Buffer Tiling is ON
    [ 2632.906] (II) Loading sub module "fglrxdrm"
    [ 2632.906] (II) LoadModule: "fglrxdrm"
    [ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.908] ukiOpenDevice: open result is 13, (OK)
    [ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.908] (**) fglrx(0): NoAccel = NO
    [ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
    [ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
    [ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
    [ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
    [ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2632.909] (II) fglrx(0): AC Adapter is used
    [ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 2632.914] (II) Loading sub module "vbe"
    [ 2632.914] (II) LoadModule: "vbe"
    [ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
    [ 2632.915] compiled for 1.14.5, module version = 1.1.0
    [ 2632.915] ABI class: X.Org Video Driver, version 14.1
    [ 2632.915] (II) fglrx(0): VESA BIOS detected
    [ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
    [ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 2632.915] (II) fglrx(0): PCIE card detected
    [ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2632.915] (II) Loading sub module "fb"
    [ 2632.915] (II) LoadModule: "fb"
    [ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2632.916] (II) Module fb: vendor="X.Org Foundation"
    [ 2632.916] compiled for 1.14.5, module version = 1.0.0
    [ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
    [ 2632.916] (II) Loading sub module "ddc"
    [ 2632.916] (II) LoadModule: "ddc"
    [ 2632.916] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
    [ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
    [ 2633.034] (II) Loading sub module "ddc"
    [ 2633.034] (II) LoadModule: "ddc"
    [ 2633.034] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Connected Display0: CRT1
    [ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.034] (II) fglrx(0): EDID Version: 1.3
    [ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.034] (II) fglrx(0): Gamma: 2.20
    [ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.034] (II) fglrx(0): Supported established timings:
    [ 2633.034] (II) fglrx(0): 720x400@70Hz
    [ 2633.034] (II) fglrx(0): 640x480@60Hz
    [ 2633.034] (II) fglrx(0): 640x480@67Hz
    [ 2633.034] (II) fglrx(0): 640x480@72Hz
    [ 2633.034] (II) fglrx(0): 640x480@75Hz
    [ 2633.034] (II) fglrx(0): 800x600@56Hz
    [ 2633.034] (II) fglrx(0): 800x600@60Hz
    [ 2633.034] (II) fglrx(0): 800x600@72Hz
    [ 2633.034] (II) fglrx(0): 800x600@75Hz
    [ 2633.034] (II) fglrx(0): 832x624@75Hz
    [ 2633.034] (II) fglrx(0): 1024x768@60Hz
    [ 2633.034] (II) fglrx(0): 1024x768@70Hz
    [ 2633.034] (II) fglrx(0): 1024x768@75Hz
    [ 2633.035] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.035] (II) fglrx(0): 1152x864@75Hz
    [ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.035] (II) fglrx(0): Supported standard timings:
    [ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.035] (II) fglrx(0): Supported detailed timing:
    [ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.035] (II) fglrx(0): Monitor name: L1918S
    [ 2633.035] (II) fglrx(0): Monitor name:
    [ 2633.035] (II) fglrx(0): EDID (in hex):
    [ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 2633.036] (II) fglrx(0): EDID for output DFP1
    [ 2633.036] (II) fglrx(0): EDID for output DFP2
    [ 2633.036] (II) fglrx(0): EDID for output DFP3
    [ 2633.036] (II) fglrx(0): EDID for output DFP4
    [ 2633.036] (II) fglrx(0): EDID for output DFP5
    [ 2633.036] (II) fglrx(0): EDID for output DFP6
    [ 2633.036] (II) fglrx(0): EDID for output DFP7
    [ 2633.036] (II) fglrx(0): EDID for output CRT1
    [ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.036] (II) fglrx(0): EDID Version: 1.3
    [ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.036] (II) fglrx(0): Gamma: 2.20
    [ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.036] (II) fglrx(0): Supported established timings:
    [ 2633.036] (II) fglrx(0): 720x400@70Hz
    [ 2633.036] (II) fglrx(0): 640x480@60Hz
    [ 2633.036] (II) fglrx(0): 640x480@67Hz
    [ 2633.036] (II) fglrx(0): 640x480@72Hz
    [ 2633.036] (II) fglrx(0): 640x480@75Hz
    [ 2633.036] (II) fglrx(0): 800x600@56Hz
    [ 2633.036] (II) fglrx(0): 800x600@60Hz
    [ 2633.036] (II) fglrx(0): 800x600@72Hz
    [ 2633.036] (II) fglrx(0): 800x600@75Hz
    [ 2633.036] (II) fglrx(0): 832x624@75Hz
    [ 2633.037] (II) fglrx(0): 1024x768@60Hz
    [ 2633.037] (II) fglrx(0): 1024x768@70Hz
    [ 2633.037] (II) fglrx(0): 1024x768@75Hz
    [ 2633.037] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.037] (II) fglrx(0): 1152x864@75Hz
    [ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.037] (II) fglrx(0): Supported standard timings:
    [ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.037] (II) fglrx(0): Supported detailed timing:
    [ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.037] (II) fglrx(0): Monitor name: L1918S
    [ 2633.037] (II) fglrx(0): Monitor name:
    [ 2633.037] (II) fglrx(0): EDID (in hex):
    [ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2633.037] (II) fglrx(0): Output DFP1 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP2 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP3 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP4 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP5 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP6 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP7 disconnected
    [ 2633.038] (II) fglrx(0): Output CRT1 connected
    [ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
    [ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
    [ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2633.038] (II) fglrx(0): DPI set to (96, 96)
    [ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
    [ 2633.038] (II) Loading sub module "ramdac"
    [ 2633.038] (II) LoadModule: "ramdac"
    [ 2633.038] (II) Module "ramdac" already built-in
    [ 2633.038] (==) fglrx(0): NoDRI = NO
    [ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
    [ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2633.038] (==) fglrx(0): UseFastTLS=0
    [ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 2633.038] (--) Depth 24 pixmap format is 32 bpp
    [ 2633.038] Loading extension ATIFGLRXDRI
    [ 2633.038] (II) fglrx(0): doing swlDriScreenInit
    [ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.039] ukiOpenDevice: open result is 14, (OK)
    [ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
    [ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
    [ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
    [ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
    [ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2633.039] (II) fglrx(0): swlDriScreenInit done
    [ 2633.039] (II) fglrx(0): Kernel Module Version Information:
    [ 2633.039] (II) fglrx(0): Name: fglrx
    [ 2633.039] (II) fglrx(0): Version: 14.10.2
    [ 2633.039] (II) fglrx(0): Date: Apr 17 2014
    [ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
    [ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
    [ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
    [ 2633.040] (II) fglrx(0): DRI initialization successfull
    [ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
    [ 2633.041] (==) fglrx(0): Backing store disabled
    [ 2633.041] Loading extension FGLRXEXTENSION
    [ 2633.041] (**) fglrx(0): DPMS enabled
    [ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 2633.041] (**) fglrx(0): Textured Video is enabled.
    [ 2633.041] (II) LoadModule: "glesx"
    [ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
    [ 2633.043] Loading extension GLESX
    [ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
    [ 2633.043] (II) fglrx(0): GLESX is enabled
    [ 2633.043] (II) LoadModule: "amdxmm"
    [ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
    [ 2633.055] Loading extension AMDXVOPL
    [ 2633.055] Loading extension AMDXVBA
    [ 2633.055] (II) fglrx(0): Enable composite support successfully
    [ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
    [ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
    [ 2633.055] (II) fglrx(0): X context handle = 0x1
    [ 2633.055] (II) fglrx(0): [DRI] installation complete
    [ 2633.055] (==) fglrx(0): Silken mouse enabled
    [ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2633.414] (--) RandR disabled
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.432] ukiOpenDevice: open result is 15, (OK)
    [ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.443] ukiOpenDevice: open result is 16, (OK)
    [ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiDynamicMajor: found major device number 250
    [ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.446] ukiOpenDevice: open result is 16, (OK)
    [ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.526] ukiOpenDevice: open result is 17, (OK)
    [ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiDynamicMajor: found major device number 250
    [ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.527] ukiOpenDevice: open result is 17, (OK)
    [ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.546] (II) fglrx(0): OverDrive6 Detected!
    [ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
    [ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.594] (II) LoadModule: "evdev"
    [ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
    [ 2633.595] compiled for 1.14.3, module version = 2.8.2
    [ 2633.595] Module class: X.Org XInput Driver
    [ 2633.595] ABI class: X.Org XInput driver, version 19.1
    [ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.595] (**) Power Button: always reports core events
    [ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.595] (--) evdev: Power Button: Found keys
    [ 2633.595] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2633.595] (**) Option "xkb_rules" "evdev"
    [ 2633.595] (**) Option "xkb_model" "pc104"
    [ 2633.595] (**) Option "xkb_layout" "us"
    [ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.634] (**) Power Button: always reports core events
    [ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.634] (--) evdev: Power Button: Found keys
    [ 2633.634] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2633.634] (**) Option "xkb_rules" "evdev"
    [ 2633.634] (**) Option "xkb_model" "pc104"
    [ 2633.634] (**) Option "xkb_layout" "us"
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
    [ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 2633.635] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
    [ 2633.639] (II) No input driver specified, ignoring this device.
    [ 2633.639] (II) This device may have been added with another device file.
    [ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2633.639] (**) Option "xkb_rules" "evdev"
    [ 2633.639] (**) Option "xkb_model" "pc104"
    [ 2633.639] (**) Option "xkb_layout" "us"
    [ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2633.640] (II) No input driver specified, ignoring this device.
    [ 2633.640] (II) This device may have been added with another device file.
    [ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 2639.300] (II) fglrx(0): Backup framebuffer data.
    [ 2639.333] (II) fglrx(0): Backup complete.
    [ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.732] (II) fglrx(0): Shutdown CMMQS
    [ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
    [ 2653.735] (EE)
    [ 2653.740] (EE) Backtrace:
    [ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
    [ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
    [ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
    [ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
    [ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
    [ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
    [ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
    [ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
    [ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
    [ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
    [ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
    [ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
    [ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
    [ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
    [ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
    [ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
    [ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
    [ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
    [ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
    [ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
    [ 2653.857] (EE)
    [ 2653.861] (EE) Segmentation fault at address 0x0
    [ 2653.866] (EE)
    Fatal server error:
    [ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 2653.878] (EE)
    [ 2653.883] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2653.904] (EE)
    [ 2653.908] (EE) Server terminated with error (1). Closing log file.
    xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
    Thanks for your efforts.
    Last edited by Mytrin (2014-05-25 19:09:02)

    I've managed to solve this error:
    (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
    There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
    EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
    Last edited by Mytrin (2014-05-25 19:06:09)

  • How to display korean text in file name

    Hi, I want to know how to make my system recognize and display Korean text in file names and such. My mp3 files are all a bunch of gibberish and they display that way in the itunes as well; the title, artist, and everything else.
    How can I fix this?

    Thanks. I tried that but the application wouldn't save any of the files for some reason.
    But it made me look for something else. In iTunes, I selected the song and right clicked, selected Convert ID3 Tags-->Reverse Unicode. Then it went to Chinese I think. I did the same thing again and it finally went to Korean.

  • Properly displaying currency amounts (negative sign) via WRITE statement

    Dear forumers,
    Using the WRITE statement, how may I properly display a currency amount that has a negative value?
    In my program, the variable, V_AMOUNT to be displayed is originally of the type "WERTV12".
    Using the WRITE statement for this, nothing gets displayed in the screen (blank only).
    So, I assigned V_AMOUNT to another variable of the type "P DECIMALS 2", V_AMT.
    Using the WRITE statement for this, the amount is displayed in the screen.
    But, if the amount has a negative value, the negative sign is not displayed there.
    I.e. If V_AMT has the value '500.00-', only '500.00' is displayed in the screen.
    Finally, I changed the type of V_AMT as type string.
    This works - any amounts with negative sign is displayed in the screen properly.
    But, with this approach, I'm unable to "customize" the display of amounts according to currency, like this:-
    DATA int TYPE i VALUE 12345678.
    WRITE int CURRENCY 'EUR'.
    The output of the WRITE statement is "123456,78".
    Is there a better way to achieve this?

    SAP display amounts/quantities as positive numbers with another field that denotes whether positive or negative.  You could change the value to a character field and put the negative where you need it (or put an additional field next to the amount with the sign)... but using a character field probably would negate the currency display, too....

  • Unable to open display localhost:0.0 in VMware RedHat linux machine

    I have been trying to Install Oracle 10g RAC in VMware linux virtual machine.
    my virtual machines are running properly and I am able to use RSH & SSH.
    when I run runInstaller it is not comming up due to DISPLAY environmental variable setup.
    I have set the varable as follows
    DISPLAY=localhost:0.0; export DISPLAY
    then if i execute xhost + it gives the following error
    "xhost: unable to open display localhost:0.0"
    I have tried with ipaddress instead of localhost. Eventhen it is giving the same error
    What is the problem? How I can solve the issue?

    i had the same issue. running the xhost + as root fixed the issue, but only after i switched to root using 'su -' instead of just 'su' (likely something in the profile scripts that get run when you use the '-' (dash) versus just using 'su'.
    after running the xhost +, i was able to (as oracle) do:
    export DISPLAY=:0.0
    ./runInstaller
    And good to go.

  • Unable to properly start X

    I seem to be unable to properly start X. I've followed the wiki and installed the X server, hwd and the nvidia drivers.
    If I run hwd -xa I get the following messages:
    /etc/hwd/pci.hw: line 25: unexpected EOF while looking for matching '''
    /etc/hwd/pci.hw: line 124: syntax error: unexpected end of file
    If I run X after that I get these errors:
    (EE) Failed to load module "vesa" (Module does not exist, 0)
    (EE) Failed to load module "kbd" (Module does not exist, 0)
    (EE) Failed to load module "mouse" (Module does not exist, 0)
    (EE) No drivers available.
    Fatal server error:
    no screens found
    If I run nvidia-xconfig and then run X I get a black screen with the X cursor in the middle but unable to do anything else except ctrl+c.
    I've already run pacman -Syu so everything should be up to date.
    Thank you for any help
    Last edited by Bahdom (2008-05-26 16:49:44)

    does it matter if a xorg.8.log exists?
    the new xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
    Build Date: 22 May 2008 06:09:07PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 26 19:13:22 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81e0900
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,005e card 1565,3402 rev a3 class 05,80,00 hdr 00
    (II) PCI: 00:01:0: chip 10de,0050 card 1565,3402 rev a3 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0052 card 1565,3402 rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,005a card 1565,3402 rev a2 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,005b card 1565,3402 rev a3 class 0c,03,20 hdr 80
    (II) PCI: 00:04:0: chip 10de,0059 card 1565,8204 rev a2 class 04,01,00 hdr 00
    (II) PCI: 00:06:0: chip 10de,0053 card f565,3402 rev a2 class 01,01,8a hdr 00
    (II) PCI: 00:07:0: chip 10de,0054 card 1565,5401 rev a3 class 01,01,85 hdr 00
    (II) PCI: 00:08:0: chip 10de,0055 card 1565,5401 rev a3 class 01,01,85 hdr 00
    (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
    (II) PCI: 00:0a:0: chip 10de,0057 card 1565,2501 rev a3 class 06,80,00 hdr 00
    (II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:08:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
    (II) PCI: 05:00:0: chip 10de,00c0 card 10de,0339 rev a2 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0200 (VGA_EN is cleared)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 3 I/O range:
    [0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
    (II) Bus 3 prefetchable memory range:
    [0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) Bus 4 non-prefetchable memory range:
    [0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
    (II) Bus 4 prefetchable memory range:
    [0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 5 I/O range:
    [0] -1 0 0x00009000 - 0x00009fff (0x1000) IX[b]
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
    (II) Bus 5 prefetchable memory range:
    [0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (--) PCI:*(5:0:0) nVidia Corporation NV41 [GeForce 6800 GS] rev 162, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [1] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [2] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [3] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [5] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [11] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [12] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [17] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [22] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [23] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [24] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [27] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [1] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [2] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [3] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [5] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [9] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [10] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [11] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [12] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [17] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [22] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [23] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [24] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [27] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [5] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [6] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [10] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [17] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [18] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [23] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [28] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [29] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [30] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [33] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 05:00:0
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [5] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [6] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [10] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [17] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [18] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [23] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [28] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [29] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [30] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [33] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [5] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [6] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [10] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [20] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [21] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [26] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [31] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [32] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [33] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [36] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    (II) NVIDIA(0): NVIDIA GPU GeForce 6800 GS (NV41) at PCI:5:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 262144 kBytes
    (--) NVIDIA(0): VideoBIOS: 05.41.02.49.02
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 6800 GS at PCI:5:0:0:
    (--) NVIDIA(0): CRT-1
    (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-1
    (==) NVIDIA(0):
    (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    (==) NVIDIA(0): will be used as the requested mode.
    (==) NVIDIA(0):
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "nvidia-auto-select"
    (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
    (WW) NVIDIA(0): from CRT-1's EDID.
    (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[b]
    [5] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[b]
    [6] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfe000 - 0xfebfe0ff (0x100) MX[b]
    [10] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
    [20] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[b]
    [21] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[b]
    [22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [26] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[b]
    [27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [31] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[b]
    [32] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b]
    [33] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[b]
    [34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
    [35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
    [36] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[b]
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
    (II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
    (II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
    (II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
    (II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    (II) NVIDIA(0): Built-in logo is bigger than the screen.
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/share/fonts/TTF, removing from list!
    Could not init font path element /usr/share/fonts/Type1, removing from list!
    FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

  • Problems displaying Korean fonts

    Hello,
    I have the latest version of Adobe Reader (9.3.4) and have installed the Korean font pack from Adobe Update link. However I am not able to display Korean fonts properly. Some are good but most are junk. But the same file can be displayed without any issue with google docs.
    Please help. I have inserted a screenshot with this message :
    as you can see, some fonts are good but some are garbage.
    Any help or leads would be much appreciated.
    Thanks
    balarka

    I have also tested the application in some PCs with Windows and the visualization problems are significantly lower.
    Regards.

  • Can Not Display Normal Chinese Chars in JSP

    Hi,
    I am displaying some chinese chars in a normal JSP file but it show me some
    funny things. If I get the data from the oracle and the information is chinese,
    then it display correctly. And I try another thing that I save the noraml JSP
    (without any java code) to a html and it is working fine. Same content, if saved
    as HTML, then ok. If saved as JSP, then got problem. I am using weblogic 6.1.
    There are somewhere need to be configure or... Any idea for this? Thank you
    very much!
    yang lin

    Hi Howard,
    if i use Font.createFont() to general font object that
    can solve chinese display problem in RH 7.3. but i
    thought, it's no reasonable way to use font object.
    that is really bad for cross-platform benefit or you
    need to carry font file with your application.
    have a way to set default font use createFont()
    object?In the past, I've carried the font file around with me. Given the number of graphics files, properties files and
    other assorted garbage that apps are already carrying around, it's not too unreasonable to have to add a
    TrueType font to the list of hangers-on (unless it's the size of Arial Unicode MS - 23Mb is a big ask sometimes)!
    Given that TrueType fonts themselves are essentially platform-independent, I don't see it as too much of an issue. But that's just me and my experiences! ;-)
    To set the font as default...
    try {
        FileInputStream fis = new FileInputStream("myFont.ttf");
        Font defaultFont = Font.createFont(Font.TRUETYPE_FONT, fis);
        setFont(defaultFont);
    } catch (FontFormatException ffe) {
        System.err.println("My TrueType font is corrupted.");
    } catch (IOException ioe) {
        System.err.println("My I/O stuffed up.");
    }There are various ways to set the font in even better ways, particularly if you're in a standalone app, but the above is at least a good basic one.
    Hope that helps,
    Martin Hughes

  • Getting an error, Unable to properly connect to the workflow service while attaching workflow to the list manually

    Hello Experts,
    I am facing an issue on test server while attaching workflow manually to the list. 
    On dev environment I am deploying workflow through visual studio and here everything works fine.
    Please suggest if anyone has faced this issue earlier.
    Regards,
    Uday G
    Line 3874: 04/27/2015 02:02:15.72 w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Logging Correlation Data      
    xmnv Medium  
    Name=Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3875: 04/27/2015 02:02:15.73
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Authentication Authorization  
    agb9s Medium  
    Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|usykgw\sp_farm_te, ClaimsCount=30
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3876: 04/27/2015 02:02:15.73
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Logging Correlation Data      
    xmnv Medium  
    Site=/ 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3877: 04/27/2015 02:02:15.80
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    ahjqp High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:15.78, Original Level: Verbose] SQL connection time: 0.093 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
    Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3878: 04/27/2015 02:02:15.80
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    UserAgent not available, file operations may not be optimized.    at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb)     at
    Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
    databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd,
    Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3879: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean&
    pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,
    String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId,
    Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3880: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
    bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
    pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
    pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3881: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
    pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
    bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
    Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3882: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32&
    pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl,
    String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest,
    Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3883: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object&
    oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean
    mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl,
    String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3884: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext
    context, String path, Boolean throwIfFileNotFound)     at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath)     at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath
    virtualPath, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
        at System.Web.Compilation.BuildManager.GetVPathBuildResultWithN...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3885: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...oAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext
    context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile,
    IDictionary contentTemplateCollection)     at System.Web.UI.Page.ApplyMasterPage()     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
        at System.Web.UI.Page.ProcessRequest(Boolean in...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3886: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...cludeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
        at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer,
    IntPtr nativeReque... 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3887: 04/27/2015 02:02:15.80*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    ak8dj High    
    ...stContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)  
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3888: 04/27/2015 02:02:15.80
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Files                        
    aiv4w Medium  
    Spent 0 ms to bind 44035 byte file stream
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3889: 04/27/2015 02:02:15.86
    w3wp.exe (0x1708)                      
    0x15E0
    0x119005                      
    adjzs High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:15.83, Original Level: VerboseEx] SwitchableSiteMapProvider "{0}" mapped to target provider "{1}"
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3890: 04/27/2015 02:02:15.86
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    8acb High    
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3891: 04/27/2015 02:02:15.92
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    ahjqp High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:15.91, Original Level: Verbose] SQL connection time: 0.0963 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
    Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3892: 04/27/2015 02:02:15.92
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (EnsureListItemsData). Execution Time=15.9063
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3893: 04/27/2015 02:02:15.98
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    ahjqp High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:15.92, Original Level: Verbose] SQL connection time: 0.0662 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
    Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3894: 04/27/2015 02:02:15.98
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    8acb High    
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3895: 04/27/2015 02:02:16.05
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    ahjqp High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:16.03, Original Level: Verbose] SQL connection time: 0.0856 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
    Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3896: 04/27/2015 02:02:16.05
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    8acb High    
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3897: 04/27/2015 02:02:16.05
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (EnsureListItemsData). Execution Time=20.7631
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3901: 04/27/2015 02:02:16.19
    w3wp.exe (0x1708)                      
    0x15E0
    0xC33B01F                    
    ahv8s High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:16.06, Original Level: Verbose] Ending StoreWorkflowDeploymentProvider.GetDefinition
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3902: 04/27/2015 02:02:16.19
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    8acb High    
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3903: 04/27/2015 02:02:16.23
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3904: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Database                      
    ahjqp High    
    [Forced due to logging gap, cached @ 04/27/2015 02:02:16.20, Original Level: Verbose] SQL connection time: 0.0671 for Data Source=SPDBTE800-001\MYNET_SQL;Initial Catalog=WSS_Content_80;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max
    Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][2][WSS_Content_80]
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3905: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    aix9j High    
    SPRequest.UpdateField: UserPrincipalName=i:0).w|s-1-5-21-515020923-1814085151-1527837076-26682, AppPrincipalName= ,bstrUrl=http://spwfte800-001 ,bstrListName={0B6B6303-D8AC-4007-94D0-5CF5502DF0F6} ,bstrXML=<Field DisplayName="PublishNewsItemWF-ItemAdded"
    Type="URL" Required="FALSE" ID="{36f69f6b-98df-44f7-b0bd-041265b4b402}" SourceID="{0b6b6303-d8ac-4007-94d0-5cf5502df0f6}" StaticName="PublishNewsItemWF_x002d_ItemAdde" Name="PublishNewsItemWF_x002d_ItemAdde"
    ColName="nvarchar22" RowOrdinal="0" ColName
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3906: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ai1wu Medium  
    System.Runtime.InteropServices.COMException: Cannot complete this action.  Please try again., StackTrace:    at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)     at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String
    schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)     at Microsoft.SharePoint.SPFieldCollection.AddInternal(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, Guid
    lookupListId, Guid lookupWebId, StringCollection choices)     at Microsoft.SharePoint.SPFieldCollection.Add(String strDisplayName, SPFieldType type, Boolean bRequired, Boolean bCompactName, StringCollection choices)     at Microsoft.SharePoint.SPFieldCollection.Add(String
    strDisplayName, SPFieldType typ... 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3907: 04/27/2015 02:02:16.25*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ai1wu Medium  
    ...e, Boolean bRequired)     at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.CreateStatusColumn(String subscriptionName, SPWeb web, Guid listId)     at Microsoft.SharePoint.WorkflowServices.StoreSubscriptionService.PublishSubscriptionForList(WorkflowSubscription
    subscription, Guid listId)     at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext
    context)     at ... 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3908: 04/27/2015 02:02:16.25*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ai1wu Medium  
    ...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
    error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at
    System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
    IntPtr nativeRequestContext, IntPtr mo... 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3909: 04/27/2015 02:02:16.25*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ai1wu Medium  
    ...duleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)  
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3910: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    8nca Medium  
    Application error when access /_layouts/15/AssocWrkfl.aspx, Error=Unable to properly communicate with the workflow service.   at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea)     at System.Web.UI.Control.LoadRecursive()
        at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3911: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service.    at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea)     at System.Web.UI.Control.LoadRecursive()
        at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3912: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ajlz0 High    
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: Unable to properly communicate with the workflow service.
        at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AssocWrkflPage.OnLoad(EventArgs ea)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3913: 04/27/2015 02:02:16.25*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ajlz0 High    
    ...t)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
        at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3914: 04/27/2015 02:02:16.25
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    aat87 Monitorable
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3915: 04/27/2015 02:02:16.28
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    Unexpected error occurred in method 'Put' , usage 'SPViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There is a temporary failure. Please retry later. (One or more
    specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been granted for this client account, and check that the AppFabric
    Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.) ---> System.ServiceModel.CommunicationException: The socket connection
    was aborted. This could be caused by ... 9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3916: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ...an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '10675199.02:48:05.4775807'. ---> System.IO.IOException: The read operation failed, see inner
    exception. ---> System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local
    socket timeout was '10675199.02:48:05.4775807'. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host     at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags
    socketFlags)     at System.ServiceModel.Channels.So...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3917: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ...cketConnection.ReadCore(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout, Boolean closing)     --- End of inner exception stack trace ---     at System.ServiceModel.Channels.SocketConnection.ReadCore(Byte[] buffer, Int32
    offset, Int32 size, TimeSpan timeout, Boolean closing)     at System.ServiceModel.Channels.SocketConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout)     at System.ServiceModel.Channels.ConnectionStream.Read(Byte[]
    buffer, Int32 offset, Int32 count)     at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count)     at System.Net.Security.NegotiateStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest
    asyncRequest)     at System.Net.Security.NegotiateStream.StartReading(Byte[] buffer, Int...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3918: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ...32 offset, Int32 count, AsyncProtocolRequest asyncRequest)     at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)     --- End of inner exception stack
    trace ---     at System.Net.Security.NegotiateStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)     at System.Net.Security.NegotiateStream.Read(Byte[] buffer, Int32 offset, Int32 count)  
      at System.ServiceModel.Channels.StreamConnection.Read(Byte[] buffer, Int32 offset, Int32 size, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:      at System.ServiceModel.Channels.StreamConnection.Read(Byte[]
    buffer, Int32 offset, Int32 size, TimeSpan timeout)     at System.ServiceModel.Channels...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3919: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ....ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
    connection, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
        at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)     at Microsoft.ApplicationServer.Caching.CacheResolverChannel.Open(TimeSpan timeout)     at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
    md, Object[] args, Object server, Object[]& outArgs)   ...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3920: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ...  at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message
    reqMsg, Boolean bProxyCase)     at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)     at Microsoft.ApplicationServer.Caching.CacheResolverChannel.OpenDelegate.EndInvoke(IAsyncResult result)
        at Microsoft.ApplicationServer.Caching.ChannelContainer.Opened(IAsyncResult ar)     --- End of inner exception stack trace ---     at Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ResponseBody respBody, RequestBody
    reqBody)     at Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemV...
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3921: 04/27/2015 02:02:16.28*
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         DistributedCache              
    agyfq Medium  
    ...ersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener listener)     at Microsoft.ApplicationServer.Caching.DataCache.<>c__DisplayClass25.<Put>b__24()     at Microsoft.ApplicationServer.Caching.DataCache.Put(String
    key, Object value, TimeSpan timeout)     at Microsoft.SharePoint.DistributedCaching.SPDistributedCache.Put(String key, Object value)'.
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3922: 04/27/2015 02:02:16.28
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         General                      
    ajb4s Monitorable
    ViewStateLog: Failed to write to the velocity cache: http://spwfte800-001/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3923: 04/27/2015 02:02:16.28
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Micro Trace                  
    uls4 Medium  
    Micro Trace Tags: 0 nasq,4 agb9s,66 ak8dj,123 b4ly,132 b4ly,198 aix9j,1 ai1wu,6 8nca,0 tkau,0 ajlz0,1 aat87,20 agyfq,0 ajb4s
    9ac4009d-b5ca-c010-44e2-238aad763833
    Line 3924: 04/27/2015 02:02:16.28
    w3wp.exe (0x1708)                      
    0x15E0
    SharePoint Foundation         Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (Request (POST:http://spwfte800-001:80/_layouts/15/AssocWrkfl.aspx?AssociatedList=0b6b6303-d8ac-4007-94d0-5cf5502df0f6&WF4=1)). Execution Time=560.4965
    9ac4009d-b5ca-c010-44e2-238aad763833

    Hi Amit,
    Please try using the below cmdlet format to register workflow service to your SharePoint QA server again per the following post with similar error, then check results again. 
    Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/46a868eb-a012-4148-8319-088d55671ae7/errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-run?forum=sharepointadminprevious
    Thanks
    Daniel Yang
    TechNet Community Support

  • Display of Chinese Characters in Flash Video

    '''Help needed to resolve issue with display of chinese fonts in Firefox.'''
    I used to be able to run an html based chinese language learning program (with embedded Flash) in Firefox on my Galaxy Nexus mobile...that is until I installed the latest version of Firefox.
    These are the instructions that came with the program to install/run it:
    This site is best viewed with Mozilla FireFox 3.x+ (and above) with either Adobe Flash Player 8+ (and above) at a minimum screen resolution of 1024 x 768. We also recommend that you enable both JavaScript and Cookies in your chosen browser's settings. Obviously things have moved on since then and the version of Firefox I installed around May 2013 would have been around 22.0
    While the above appear to be targeted at computer/tablet platforms the program ran successfully on my mobile and the embedded flash video worked well. The video clips and accompanying audio for each lesson were also accompanied by text that updated as each speaker began conversing. This text could be displayed (by selection) in English, Pinyin or Chinese characters.
    With an upgrade to the latest version of Firefox the Chinese characters now no longer display although 'English' fonts do...why? Is this a character encoding issue? Can this be set? What has changed between version 22 or thereabouts that I installed in May 2013 and the current version. Someone must surely know ??? If this cant be fixed, how can I re-install an older version of Firefox on my mobile. As an aside
    I was able to download firefox-22.0.bundle, some bundle.parts and .source files along with Firefox Setup 3.6.28.exe but cant install any of these. HELP needed please.

    Hello,
    Can you please confirm that this is the summary of the issue you are facing
    #On a site using Flash, and using Firefox 22.0, you were able to view English, Pinyin, Chinese characters on the flash video
    #You upgraded Firefox to the latest version from the play store, and also have the latest Flash version, but the same Flash video doesn't display the Chinese characters now
    #You are looking for the older version of Firefox for Android so that you can confirm that this issue has something to do with the latest version of Firefox
    For the last point, you can download the Android APKs of the older versions from the following links
    #[https://ftp.mozilla.org/pub/mozilla.org/mobile/releases/22.0/android/en-US/ Android APK for Firefox 22.0 in English]
    #[https://ftp.mozilla.org/pub/mozilla.org/mobile/releases/22.0/android-armv6/en-US/ Android APK for Firefox 22.0 in English for Arm V6]
    Please do note that you will need to enable the 'Install from unknown sources' option on the Android device to be able to install this APK. Suggest that you disable the setting after you finish your testing.
    Please confirm the details above and we can help you resolve the issue.
    Thank you

  • Why do TOC do not properly display levels,... even after I set them to?

    All,
    I am having a major hard time trying to get my TOCs to properly display levels. I have been doing research on the subject, but it seems any recommendations have proved futile.
    The issue:
    My ID docs TOC's do not display levels at all
    I have pretty much tried everything. I have gone to simple styles for Chapters and Sub Chapters to see what the issue would be
    Image:
    Some Findings
    One article I found which outlined ID having issues with inset text boxes
    It seems setting an inset on text boxes with TOC content affects the display of such
    I tried removing any insets but results still did not fix the issue i face
    Questions
    What the hell am i doing wrong?
    Is this a bug in ID CS6?
    Is there anything I should not be doing when formatting a style that will be used on the TOC?
    Are there any "NO NOS" I should be aware of here?
    I mean, the above image is a test i built using a bare bones approach. The "Chapters" and "Sub Heads" styles are truly basic formats. The only attributes to these styles is a change in font style and size:
    Thank you to anyone who can help me on this.
    PixelNovae
    ID 6 (v8.0)

    Hi all,
    Thanks to everyone for all your comments.  To remove any possible conflicts, I did not apply any entry styles to the entries because i thought:
    The TOC function generate levels independent of styles
    Levels are automatically applied to any entry (TOC levels override everything else)
    That levels override any styles one may apply to the entry
    Basically, I do not need a style to create an indentation in my TOC. Levels create the indentation. (thus my example using the default ID Basic Paragraph Style)
    Are the above assumptions wrong? If I am wrong, then are you guys saying I would need to create a TOC specific style denoting indentation for ever level?
    IOWs, following my example:
    Chapters =        LV1     = Create a "TOC Paragraph Style X"  that indents (say) 0pxs
    Sub Heads =     LV2     = Create another "TOC Paragraph Style Y" that indents (say) 20pxs
    On the table of contents I would need to apply each their corresponding style in order to create TOC indents:
    "Chapters" ---> TOC Paragraph Style X
    "Sub Heads" ---> TOC Paragraph Style Y
    If this is the fix, then I must say that this is a very cumbersome approach. (Hell, I would ask, why give me the levels option in the firts place in the TOC dialogue box!) If I have a book with a ton of levels, it will be pretty darn hard to manage so many styles.
    PS: sorry I omitted one dialogue screen in my original post. Here is what I am doing.
    Thanks again. I'm perplexed at this, but nevertheless thankful for all your shared insight.
    PixelNovae
    ID CS 6

Maybe you are looking for

  • Problem in leave request configuration

    Hi, i am configuring Leave Request in EP6.0 using workflow template WS20000081. In the Portal side i am able to send a leave request successfully, but <b>i am not able to receive any notification in the Universal Worklist</b>... can anyone please sug

  • The date on ichat is always on 6/6/10  8:41, it's not update

    Hi, my ichat box is always show date and time the same it's always on 6/6/10 8:41 All the time it should tell the real date what's the problem? and How to solve it? i want it save the real date and time Help.............. Thanks

  • Customers Credit Availability

    Hi! Does anyone knows if there is an API, standard function or whatever that helps me get customer's available credit. I know there is a report "Customer Credit Snapshot" that gives credit limit, credit available, credit exceeded... I tried to find i

  • Error when opening the Standard Transformation

    Hi All, I have made changes to DSO by adding an Info Object which is a part of Business Content(SRM) and transported it. But i forgot to activate the transfromations which are above the DSO and DSO provides data to 4 other Info Providers. So the Tran

  • Auf wie vielen Computern kann man Adobe Photoshop Lightroom 5 aktivieren?

    Hallo, ich besitze Adobe Photoshop Lightroom 5 und habe das bereits auf 2 Computern installiert. Auf wievielen Computern kann ich das insgesamt installieren? LG