Unable to properly submit default credentials for use with Job Submission

Greetings,
I have several jobs running successfully by overriding default credentials. I am having difficulty getting them to run using the default credentials. Under preferences I choose referred credentials and set the username and password for the target of interest, choose to test the connection and it is successful. Under the database instance I set the username and password and the host username and host password and again the connection test is successful. I then go to the job in question (which BTW is running successfully if I choose override default credentials), edit the job and ask it to use the preferred credentials. WHen I click submit I see the following message displayed - FOllowing Preferred Credentials are not set: Database Host Credentials on Targets.... or Normal Database Credentials on targets....
I am cleary missing something but I am not certain what. Any thoughts would be appreciated.
Thanks.

I figured it out. The job is associated with a particular user but default credentials were not set for that particular user. Once I set those credentials for that user the job submission was successful. Thanks.

Similar Messages

User's default email address for use with Answers

How to use user's default email address for use with Answers?
When I was referring to the Admin Guide I found the below description for email session variable.
Can somebody please help me with this.
Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
Thanks,
Swetha

I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

Compatible External DVD/CD Drives for use with MacBook Air

Hello all,
I'm after buying an external drive and was hoping we could put together a list of compatible drives as I've read on other forums that not all are compatible.
Please no links as they tend to expire but rather just list the make and model of the drives.
Thanks,
Jompet

Kappy wrote:
Apple sells an external USB optical drive specifically for use with the MBAs. That would be your best option. MBA SuperDrive.
Sorry, but that's not correct. I got the white version:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007595%2050001623 &IsNodeId=1&name=LG%20ELECTRONICS
Works perfect.

Nike + for use with Ipod Video

can i use the nike + with my ipod video. i already have the nike 180 for use with the chip. i bought them because they were great runing shoes and just found out i could put the chip in them for $35. i have a video but not a nano aand i would really like to use the chip to track my progress. buying a nano would cost 200+ and i was just wondering if i can use it with my video. thanks

I'm sorry, but this doesn't make any sense. There are products made to run with iPod videos
It is what it is.
The Nike+iPod product is for the Nano only. Doesn't matter why.
If you know of other products that do the same thing as the Nike+iPod product, and it works for the 5th Gen iPod... then go buy one of those.
Then you go on to say that Apple isn't promoting the use of iPod video
That's not exactly what was said. The user who posted that indicated that Apple is only promoting the use of the Nike+iPod in conjuntion with the Nano.
Well, obviously, there isn't any harm for people to excersise with this product if there are accessories for that purpose.
Doesn't change the fact that the Nike+iPod product is for the Nano only.
If you have a suggestion for Apple, and would like to see the Nike+ product work with other iPods, then you can submit feedback to Apple here:
http://www.apple.com/feedback/ipod.html

Unable to locate the xml-definition for FieldName with FieldId

On a site collection of SP2013 on-premise farm, I found there are many similar log occur every minute. The logs are like:
Unable to locate the xml-definition for FieldName with FieldId '56747800-d36e-4625-abe3-b1bc74a7d5f8', exception: Microsoft.SharePoint.SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException:
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
The log level is medium. The same set of log occur every minute with same set of 60 different GUIDs. All related function on the site is working as expected. By using PowerShell to loop thru the site collections I confirmed there is no field using these
GUID. Also I have checked the content database and configuration database, also no luck to finding these GUIDs.
These logs should be related with the search service since the Authentication Authorization log mentioned it is the "Crawler" account in action. However I have no idea why the crawler keep looking for these GUID. I have reset the farm service multiple
times already.
The farm was upgraded from SP2010 and it seems no such logs before upgrade.
Any advice? Thank you.

Hi Mark,
From your description, this issue ocurred after you upgraded SharePoint 2010 to SharePoint 2013. Is it right?
Whether you have some solutions in SharePoint 2010.
If yes, please make sure you deploy the solution in SharePoint 2013 well after you upgraded to SharePoint 2013.
There are some similar posts, please check if they are useful for you:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/5fa900f0-8a1d-4ce8-9ef8-d6e599106834/unable-to-locate-the-xmldefinition-for-fieldname-with-fieldid?forum=sharepointdevelopmentprevious
http://shipoint.com/2013/03/22/fixing-unable-to-locate-xml-definition-for-ctype-with-spcontenttypeid-in-sharepoint-2010/
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to locate the xml-definition for FieldName with FieldId '1f8a351c-965d-4927-9c22-8772b7089f55' when trying to activate feature with references a custom field type

I´ve a solution which contains a custom field type (found somewhere on the net, the custom field type maps a choice field to managed metadata). There is a second solution which contains site column and site content type definitions using the custom field
type definition from field type solution.
On my developement environment, there is no problem with this two solutions. When field type solution is deployed, i can deploy the content type solution and activate the feature and everything is fine.
However if i give the two solutions to our adminstrator to deploy them into our staging environment, content type feature activation fails. Deploying the field type solution makes no problems. The field type is then available and i can manually creates
columns with this new field type. However activating the content type solution fails with the error shown in the title of this message. The FieldID from the message is not part of my content type project. Searching the net doens´t show any results for that
id. So i think it´s not some of the standard field id´s from sharepoint.
Can anyone help?

Stack Trace
Unable to locate the xml-definition for FieldName with FieldId '1f8a351c-965d-4927-9c22-8772b7089f55', exception: Microsoft.SharePoint.SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException (0x8000FFFF): Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes) -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.SPFieldCollection.FetchFieldsFromWeb()

Import "general use" certificate for use with Exchange

Usually (that's the way I've always done it), we create a certificate request on the Exchange server, submit the request to the certificate authority (preferably a 3rd party public CA) and then import and enable the certificate for the appropriate Exchange
functions: IIS, SMTP, IMAP. POP, for example.
What if the company already has a wildcard certificate obtained for others uses or general use (that's how it was described to me).
It was suggested that we might just use that certificate...
I think it would be best to "go by the book" and proceed as mentioned above (creation of cert request on the Exchange server, submission to CA, and so forth). After all, you can obtain a certificate appropriate for use with Exchange for just over
$50.
But is the other option even possible?
I know you can export an Exchange certificate obtained by what I believe to be the preferred way and import it on another Exchange server or on a ISA/TMG machine.
But could you export a certificate from an Apache web server or a firewall device or... just something else, and use it for Exchange?
This article seems to suggest you could:
http://www.sslshopper.com/move-or-copy-an-ssl-certificate-from-an-apache-server-to-a-windows-server.html
But from what I know about Active Directory Certificate Services, there are all kinds of templates for various uses (disk encryption, email, code signing, etc.), presumably not interchangeable.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

So you want to export the existing wildcard certificate from a non-Windows system and import it to the Exchange server, correct?
The article shows that openssl will create a PFX (PKCS#12) file - so this should work.
I would not worry about templates. If the existing certificate is a SSL certificate (Extended Key Usage = Server Authentication) it should be OK.
From "PKI Best Practices" perspective / "what a certificate actually is intended to be" it would be better to have a dedicated certificate including all the Subject Alternative Names needed by Exchange - but I know there are limitations to a certain number
of names by public CAs. But theoretically if you ever wanted to revoke this wildcard certificate you would get into troubles as the same certificate is on very different systems.
Elke

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Can i buy an iPhone at a pawn shop and get it unlocked for use with Straight Talk wireless?

Just wondering if I can buy a used iphone at a pawn shop or on ebay and get it unlocked for use with the prepaid Straight Talk wireless service? If so, how much would it cost to get it unlocked?

PHones can only be unlocked from the carrier; if you're looking for an unlocked device I'd recommand buying it directly from Apple as that is the only way to promise it is, if you buy it second hand you may find it is locked to a carrier who doesn't support unlocking, or worst yet activation lock

Best drum loops for use with Logic? Ease of use, usability, etc.

Hi,
I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
Thanks

try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

Unable to properly submit default credentials for use with Job Submission

Similar Messages

Maybe you are looking for