Unable to provision a DS1 on a 15310MA using CTM

Good Morning all,
When I try to provision a DS-1 on 15310MA using the DS1-84 card, we are unable to access any of the ports above port 28. on the create circuits window, tab #3. selecting the DS1 card, under the port dropdown menu. if you select DS1 (29-56) or DS1 (57-84), the STS dropdown is grayed out and will not select the proper STS associated with the port. i.e. ports 29 thru 56 are supposed to be on STS #2 and ports 57 through 84 are supposed to be on STS #3. Building the circuit through CTC works fine. We are using CTM 8.5 Build 430, Patches 3. the client is the same. I have attached a pic of the issue.
Thanks for the help.

This is a bug in CTM 8.5. It has been fixed in CTM 9.1
NOTE: CTM 8.5 was declared End of Life (EOL) July 1, 2009.
- End of SW maintenace release was December, 30, 2010
- Last date for all Support is December, 29, 2012
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps5730/ps2204/end_of_life_notice_c51-548565.html

Similar Messages

"Unable to provision your device' error when tryin...

Can someone please help! I 'upgraded' to v40 firmware for my Nokia 5800 and lost my contacts. I am trying to sync it with Ovi.com but when I try to SMS the settings the site (not the phone) gives and error 'unable to provision device'. I can't even find a way to enter sync settings manually. Please help!

Same problem here, except that I don't know if it was working before because it's the first time I try the service.
I DO get the SMS from OVI on my phone, but when I open it, it asks for a "Configuration settings PIN" which I don't have.
Immediately after I receive the SMS I get on the webpage the same error you guys are receiving.
Don't know what's wrong.
Any clues anybody?
Cheers,
Luis

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

HT1918 I'm unable to make iTune purchases from my phone using my iTune gift card

I'm unable to make iTune purchases from my phone using my iTune gift card, the gift card information is entered on the phone and I can see the credit amount.

I am having the same problem and it is REALLY frustrating.
Exact setup that you have, COMCAST, PayPal, etc....
I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. Let me know if you hear anything.
This is a REAL PAIN.
Andy

I am unable to print color photos from i photo using a Brother Printer

I am unable to print color photos from i photo using a Brother MFC-6490CW all in one. The photos appear to be in grayscale. I have checked the printer settings, but for some reason I am not able to access the color management on my printer from printer set up. It only gives me the standard option. I have spent hours checking Bother's website and Apple's and I am not able to come up with a valid answer. I know that the color print works. If I print something from the internet of from outlook it will print in color. I know all of my cartridges are in working order, I have cleaned the print head on my Brother, but I am still not able to print photos in color!!!
What puzzles me the most is why I am unable to really access the color management menu on my printer? It just does not come up. I have the option from paper handling to print photos, but this has nothing to do with the quality. I have also tried printing the photo from an Adobe PDF file and I still have the same problem. Can anyone point me in the right direction? Thank you.

In the Print dialogue box click on the little triangle to the right of the name of the printer. That will expand the dialogue box.

I cant download apps. It keeps sayin 'unable to load. Try again later' I use my iphone to download. How do i get it to work?

I cant download apps. It keeps sayin 'unable to load. Try again later' I use my iphone to download. How do i get it to work?

1. Read the manual.
2. Contact yoru wireless provider.

ICloud backup is unable to access the account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete my account?

iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?

You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Sorry for double post, doesnt seem to be an edit option, this also works both ways.

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Unable to open pdf created with Acrobat Pro using Adobe Reader X

Files created with some Adobe Professional applications such as Acrobat Pro ensure the file is small by excluding font information from the file. Simple pdf creation applications embed the font in the file, which makes for transportability between apps but does make the files big.
The problem i have experienced is that Adobe Reader X is one of the simple app varieties, so is unable to open, print, or read files created using Adobe Acrobat Pro..
i'd welcome any help in (a) finding a free app that opens these 'pro pdf' files, OR (b) an option setting in Acrobat Pro which includes the font information in the file - or both!

There are so many things wrong, around a tiny grain of truth, it really isn't worth examining. Not at this stage if you are more interested in getting things working. It may be worth asking you though, since Reader doesn't even launch for you, how you came to focus on font embedding being the cause.
Ok, Reader doesn't launch. Suppose you start Reader FIRST. Then use File > Open on your PDF.

HT1414 I am unable to download itunes to my computer, to use my ipod. I get HRESULT:0X80070002

I am unable to download itunes to my computer to use my ipod nano (old one) I keep getting the error HRESULT:0x80070002, can anyone help???? PLEASE!!!!!

Try:
Trouble installing iTunes or QuickTime for Windows

Have just purchased Lion and unable to get to store to download. Using iMac OS10.6.8

Have just purchased Lion, have Redemption code, etc, but unable to get to place to download. Using OS 10.6.8

Follow the instructions that came with the redemption code. If you are, provide details on what's happening where, including any messages. Alternatively, contact http://www.apple.com/support/mac/app-store/contact/ since they're responsible for making this work.
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), SL & ML, G4 450 MP w/Leopard, 9.2.2

Unable to connect wirelessly on an Acer laptop using Vista

I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

#1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
#2 And check to be sure, if you use a WEP password of Hex or Ascii.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

I am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however halfway through the download it says that the network has been disconeccted and to adjust my setting. very frustrating!!!

i am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however the downloadkeeps stopping about halfway through saying i have been disconnected from the network and to check my settings. very frustrating! help!

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Unable to provision a DS1 on a 15310MA using CTM

Similar Messages

Maybe you are looking for