"Unable to provision your device' error when tryin...

Can someone please help!  I 'upgraded' to v40 firmware for my Nokia 5800 and lost my contacts.  I am trying to sync it with Ovi.com but when I try to SMS the settings the site (not the phone) gives and error 'unable to provision device'. I can't even find a way to enter sync settings manually.  Please help!

Same problem here, except that I don't know if it was working before because it's the first time I try the service.
I DO get the SMS from OVI on my phone, but when I open it, it asks for a "Configuration settings PIN" which I don't have.
Immediately after I receive the SMS I get on the webpage the same error you guys are receiving.
Don't know what's wrong.
Any clues anybody?
Cheers,
Luis

Similar Messages

  • "iTunes was unable to verify your device" error

    Hi,
    I have a first generation iPad that has been working just fine. I decided to give it away, and so I wiped it and set about restoring it to factory defaults.... except, now I keep getting the error "iTunes was unable to verify your device. Please disconnect and reconnect your device. If the error persists, see your local Apple store for assistance." Well, the error is persisting despite disconnecting, reconnecting, attempting to restore several times, attempting to use DFU mode, no matter what I do, I get this error. I did see in a different forum, someone said this suggests the iPad was jailbroken or hacked in some way. So, just for clarity here - this iPad was never running anything except standard iOS. Anyone have any ideas?

    Apple's activation servers are down at the moment.  Try again in a few hours (or even tomorrow).

  • Please connect your device Error when trying to download (sync) app from AppWorld

    Hi,
    I need help. I have been using my BB8520Curver for a month already and was able to download apps in the appworld before but after I upgraded the Appworld in my device (to AppWorld version3?) I can't sync or download anything. im getting an error message on the sync page "Please Connect Your Device" but i know my device is connected becase my BB Desktop Software is open and my 8520 is connected and can do any Sync process. I already did take the battery out to reset the device and try to uninstall and reinstall the appworld both in my device and my browser and still it ain't working. Please help me to maximize my Blackberry.

    turn off the mobile network (options - mobile network)make sure you put off for data services and roaming..then restart and reconnect your bb

  • ITunes was unable to verify your device. Please disconnect and reconnect your device. If the error persists, please visit your nearest Apple Store for assistance. To find your nearest Apple Store,

    Dear Suport,
    when I upgraded to IOS 6,1,3 it gives me an error message "your iphone could not be activated because the activation server is temp....." Try Again
    Regard
    Iyus

    Just for what it is worth - I am currently getting the same error "iTunes was unable to verify your device" when trying to restore my first-generation iPad. I restored it several times, even trying DFU mode - and each time, ultimately, I get the same message as the original poster in this thread. I have had this iPad since it was originally released, and have never run anything on it but standard iOS, I would not know how to begin jailbreaking or hacking an iPad anyway. It was working just fine yesterday. Then I decided to upgrade and to give this iPad to a friend, so I wanted to wipe it and restore. I wiped it, and now this. Very frustrating.

  • Error Unable to lock your device in Muvo TxFm 1

    Hi,
    I have a muvo Tx Fm GB. during Firmware update?device
    Isshowing ERROR " Unable to lock your Device "?if any body know that how to remove this error, plz suggess......
    Dev Kumar

    Help please

  • Zen Xtra (Nomad) - Unable to read from device error (have tried everythi

    Recently, I've been having problems with my Creative Zen Xtra Nomad mp3 player. One day it started freezing and lagging massi'vely when I would enter nomad explorer. Now it's virtually impossible to drag and drop something from nomad explorer to my computer or vise versa (keep getting the unable to read from device error). However, sometimes I am able to get an mp3 or two after about 5 minutes of transfer time.
    I have no idea why it is doing this. One day I'm transferring my data back and forth with no problem, and the very next day I am getting this freezing, lagging, and errors when trying to transfer. The only thing that changed was me formatting my computer in between it working and it not working, but I did reinstall the driver and nomad explorer once I formatted (I'm also using the same USB 2.0 cable, but it worked fine the day before, so I am pretty sure that's not part of the problem). I was using the mp3 player to store about 0 GB worth of data for when I formatted, and now I'm unable to retrieve virtually any of it. I've tried everything under the PC Connectivity link short of formatting the mp3 hard dri've (and that is not an option because I need the files). I took it to a friends house to try on his computer, but it acted the same way. I'm completely stumped. Is there anything I haven't ruled out? Also, I'm running Windows XP Pro SP2, and I was using SP2 before the format as well if that has any relevance.
    Please let me know if I've left out any important information relevant to this issue. Any help would be very much appreciated.
    Thanks in advance.
    -Noah Patterson
    Edit: I'm having the exact problem as this guy, but I didn't seem to find any answers on his thread.
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=6459&query.id=3264 5#M6459
    Message Edited by talzok on 09-20-2005 08:03 AMMessage Edited by talzok on 09-20-2005 08:09 AM

    Never use MP3 players to store important data, or as a single point of storage for any data (that includes keeping a backup of the player's audio tracks). You can have problems like this with accessing the data, as well as simply dropping the player and losing the lot.
    There are a couple of methods I've seen that have worked to retrieve data:
    . Driver update - either update to the latest drivers, or nonsensically downgrade to the drivers that come on the install CD.
    2. Notmad Explorer - use the Xtreamer function in Notmad Explorer's trial version (which is free) to access the data and download it. It will be tedious, because I assume you have to download one file at a time.
    As for your general problem, I would try using Creative's MediaSource instead of Nomad Explorer to access the player (people generally don't have good experiences with Nomad Explorer).
    Also make sure you download the latest versions of the drivers (taking above into account), MediaSource, and the MediaSource plugin from Nomadworld.com downloads.
    Once you have the data off (hopefully!) you might simply want to reformat it if none of the above hel
    ps.

  • "iTunes was unable to verify your device" after succesfully completing recovery mode on iPhone 4

    I have an iPhone 4 which has never caused me any problems, until i updated to iOS7 it started lagging and battery didn't even last until midday (having it charged 100% in the morning!).
    In just a few days it turned off automatically and wouldn't turn on. I googled and solved it by pushing the two buttons together for about 10 seconds. iPhone revived, and all the data was intact though many people states it would've been erased.
    The morning after, using my iPhone more carefully not to have it crash again, it crashed. 10 seconds wouldn't do and I gave up, until the day after I found by surprise that the battery had run out and it finally showed some sign of not being completely dead!
    I connected the cable to iTunes and pushed the Home button before connecting the iPhone and it entered Recovery mode. Recovery mode was completed and the iPhone had to restart to complete the process. While completing I get the error message "iTunes was unable to verify your device, please disconnect and reconnect your device". And from here I don't get anywhere, so I will probably visit Apple Store and ask what can be done, but if anyone has had the same problem please share any possible solution to this problem!

    I had to contact Apple Store and make an appointment. They tried the last step suggested (which I had already tried three times) and stated that the memory had failed. They said it probably failed due to having some small issue already on the phone and then updating to a new iOS.
    They could only offer me an exact copy of my iPhone but new for 149€.

  • Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

    You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig

  • "unable to find root device" error with linux-lts

    Hi all,
    I'm having a problem with booting linux-lts after a recent upgrade (3.14.39-1 -> 3.14.43-2). In particular, I get an "unable to find root device" error.
    I have look at other threads for potential solutions; I have tried a) re-installing linux-lts, b) adding 'block' before 'autodetect' in mkinitcpio.conf before the re-installation, and c) changing /dev/sdb4 (my root partition) in syslinux.cfg to UUID and PARTUUID. I still get the same error.
    In the emergency shell, running 'blkid' does not show the root partition in the output.
    If I boot from the latest kernel (4.0.4-2), it all boots fine.
    Does anybody have any ideas on anything I could try to get linux-lts to boot? I'd prefer to stay with the lts kernel if possible.

    KangarooLemonade wrote:I ran through the beginner's guide to installing Arch on the wiki and installed Arch onto an external USB hard drive.
    Yeah? And did you see this: https://wiki.archlinux.org/index.php/Be … nvironment ?
    Here you need to set the right hooks if the root is on a USB drive, if you use RAID, LVM, or if /usr is on a separate partition.
    No, of course you missed it...
    Boot your install using the Fallback entry. If you do not have a Fallback entry, press Tab (for Syslinux) or "e" (for GRUB) and rename it initramfs-linux-fallback.img. After it boots, open up a terminal and run:
    # nano /etc/mkinitcpio.conf
    <add "usb" to the HOOKS line>
    # mkinitcpio -p linux
    # reboot
    And don't forget to mark it as solved.
    Last edited by DSpider (2012-10-01 20:11:04)

  • Unable to display tree view; Error when parsing an XML document (Premature end of file.)

    Hi folks,
    I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
    Unable to display tree view; Error when parsing an XML document (Premature end of file.)

    kalyan,
    There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
    Mutti

  • JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

    hi,
    i get by testing in PI 7.1 (operation mapping) this ERROR:
    "Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
    this is my java-programm-code:
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import com.sap.aii.mapping.api.StreamTransformation;
    import java.io.*;
    import java.util.Map;
    import javax.xml.parsers.*;
    import org.xml.sax.*;
    import org.xml.sax.helpers.*;
    /*IMPORT statement imports the specified classes and its methods into the program */
    /Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
    public class Mapping extends DefaultHandler implements StreamTransformation {
    Below is the declaration for all the variables we are going to use in the
    subsequent methods.
         private Map map;
         private OutputStream out;
         private boolean input1 = false;
         private boolean input2 = false;
         private int number1;
         private int number2;
         private int addvalue;
         private int mulvalue;
         private int subvalue;
         String lineEnd = System.getProperty("line.separator");
    setParamater() method is used to store the mapping object in the variable
    "map"
         public void setParameter(Map param) {
              map = param;
         public void execute(InputStream in, OutputStream out)
                   throws com.sap.aii.mapping.api.StreamTransformationException {
              DefaultHandler handler = this;
              SAXParserFactory factory = SAXParserFactory.newInstance();
              try {
                   SAXParser saxParser = factory.newSAXParser();
                   this.out = out;
                   saxParser.parse(in, handler);
              } catch (Throwable t) {
                   t.printStackTrace();
    As seen above execute() method has two parameters "in" of type
    InputStream and "out" of type OutputStream. First we get a new instance
    of SAXParserFactory and from this one we create a new Instance of
    SAXParser. To the Parse Method of SaxParser, we pass two parameters,
    inputstream "in" and the class variable "handler".
    Method "write" is a user defined method, which is used to write the
    string "s" to the outpurstream "out".
         private void write(String s) throws SAXException {
              try {
                   out.write(s.getBytes());
                   out.flush();
              } catch (IOException e) {
                   throw new SAXException("I/O error", e);
         public void startDocument() throws SAXException {
              write("");
              write(lineEnd);
              write("");
              write(lineEnd);
         public void endDocument() throws SAXException {
              write("");
              try {
                   out.flush();
              } catch (IOException e) {
                   throw new SAXException("I/O error", e);
         public void startElement(String namespaceURI, String sName, String qName,
                   Attributes attrs) throws SAXException {
              String eName = sName;
              if ("".equals(eName))
                   eName = qName;
              if (eName.equals("NUMBER1"))
                   input1 = true;
              if (eName.equals("NUMBER2"))
                   input2 = true;
         public void endElement(String namespaceURI, String sName, String qName)
                   throws SAXException {
              String eName = sName;
              if ("".equals(eName))
                   eName = qName;
              if (eName.equals("NUMBER1"))
                   input1 = false;
              if (eName.equals("NUMBER2"))
                   input2 = false;
         public void characters(char[] chars, int startIndex, int endIndex)
                   throws SAXException {
              String dataString = new String(chars, startIndex, endIndex).trim();
              if (input1) {
                   try {
                        number1 = Integer.parseInt(dataString);
                   } catch (NumberFormatException nfe) {
              if (input2) {
                   number2 = Integer.parseInt(dataString);
              if (input2 == true) {
                   addvalue = number1 + number2;
                   mulvalue = number1 * number2;
                   subvalue = number1 - number2;
                   write("" + addvalue + "");
                   write(lineEnd);
                   write("" + mulvalue + "");
                   write(lineEnd);
                   write("" + subvalue + "");
                   write(lineEnd);
    in developer studio 7.1 i dont get error.
    this happens by testing the mapping-programm in ESR.
    can somebody help me please?

    Make sure that the xml created out after the java mapping is a valid xml with only one root node.
    Regards,
    Prateek

  • BB8520 Application Loader Was Unable Connect With Your Device .

    Hi ,
    I am upgrade my bb8520 using bd program , but untill reconnecting to jvm it come up applicayion loader was unable connect with your device . please reconect your device , enter the password , if required , and click retry . but the phone is running at the half way . I don't know how . Please advice .
    Thank You .

    ryouiken wrote:
    Hi ,
    I am upgrade my bb8520 using bd program , but untill reconnecting to jvm it come up applicayion loader was unable connect with your device . please reconect your device , enter the password , if required , and click retry . but the phone is running at the half way . I don't know how . Please advice .
    Thank You .
    Hi ryouiken,
    Try using BlackBerry Desktop Software. Read this article.
    How to perform a clean reload of the BlackBerry Device Software for Windows
    Good luck!
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • When Audio Console launched, Unable to find audio device error message comes

    When I launch audio console, I get an error message saying:
    "Unable to find audio device. Please make sure that your audio device is enabled and installed with its driver. This application will be closed."
    This can't be right because my soundblaster audigy 2 ZS platinum card is installed, its working, I can hear things etc.
    I uninstalled and reinstalled the audio console software package from creative and that fixed the problem for a very short while and it is now reoccurring.
    I've had this same setup for several years with no issues, now all of a sudden, this is happening.
    Anyone out there had similar challenges?
    Thanks for looking!Message Edited by dgmtoronto on 07-22-200703:33 PM

    Most probably you don't have passed the correct root= option to the kernel so that the kernel cannot, as it says, find its root device. Read the wiki page about refind in order to know how to configure it (https://wiki.archlinux.org/index.php/REFInd). Refind as no fully automatic configuration like grub.

  • I/o device error when trying to use windows 7 backup to an external hard drive

    I have a Windows 7 operating system.  The computer was running very slowly so I used the systems diagnostics at startup and received short DST failed with a failure id of 6C2NXD-53Q713-XD002J-60RL03 for the hard disk test,  the start up test, the
    run-in test.  Each test showed memory test passed and smart check passed.  In researching the error it states that my hard drive is failing or perhaps some program is causing the error.  I tried removing some programs I thought may be the issue.
     Didn't work.
    I have tried using the Windows 7 backup but the backup reached about 67% then states backup not completed i/o device error.  I am trying to back up my files to a brand new Toshiba USB 3.0 & 2.0 external hard drive with 1.0 TB/To.
    I have gone to start then computer and it shows the device.  It also shows some files on it.  The backup fails when it it trying to do a system image as far as I can tell by reading the progress details.  The Toshiba device says that it is
    working fine and is already formatted to NTFS.   
    What else should I check or do?  My computer is also now popping up with a window telling me a backup is needed before the hard drive fails.  It pops up with this message at the same time I am trying to do the backup (the backup is already processing).
    Thank  you

    Hi,
    Have you performed a disk check on your PC? More details, please check here:
    How to Run Disk Check in Windows 7
    Regarding the i/o device error, have you received any specific error IDs like
    0x8007045D?
    In addition, please also take a verify to see if the external disk is Advanced Format Disks(Some types may not compatible with Windows 7):
    For example Run fsutil fsinfo ntfsinfo f:
     to check the
    bytes per physical sector
    of the external disk drive.
    More information, please see:
    An update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with Advanced Format Disks is available
    Hope this may help,
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • PSE8/PRE8 device error when burning DVD

    When trying to burn a DVD using PSE8 and PRE8 in Vista Home Premium 64 bit, and now in Windows 7 Home Premium 64 bit, PRE8 stops at 96% burn and gives me "Device error - the target device isn't suitable for use."  The DVD will run on the computer and the slideshow stops just short of the end.  The DVD will not run on DVD player/TV.  I had no such problems using PSE6/PRE4 on Vista setup.  Suggestions?

    Hi rqferq
    There is a separate forum here for Premiere Elements and because the error you are describing would occur when running under Premiere Elements, I recommend that you post your question at
    http://forums.adobe.com/community/premiere/premiere_elements

Maybe you are looking for