Unable to publish WPC page in portal 7.4

Hi Experts,
My portal version is 7.4 and i have created one test WPC page under the Area Management but when i am unable to  publish the WPC page the publish option is in diable mode.
Can anyone tell me how to enable the publish option for the WPC page???
Regards,
Anil

Fixed with help of How to create web page and insert content in it using Web Page Composer in SAP EP 7.3

Similar Messages

  • WPC pages gives portal runtime error

    hi Experts,
    i am trying to make a WPC page  but while i am in edit page and i click on page layout or publish or finish i am getting portal runtime error in the pop up window.
    i am having WPC_Editor role.
    please suggest what can be the problem here.
    regards
    SS

    Hi SS,
    Please ensure that you have followed all the steps mentioned in this thread.
    GMT wrong in activity report
    Note 1128018 - Portal Runtime Error appears in Web Page Composer pages
    Lastly, you can try refreshing the page and figure out if it works.
    Cheers!
    Sandeep Tudumu

  • Unable to publish iWeb pages to .Mac

    I have been using iWeb (version 1.1.2) quite happily for past two weeks and have successfully published to .Mac/Mobile Me. But today I have been having loads of trouble and have been unable to publish anything, although I can publish to a folder, which is of no use.
    When I try to publish I get the following types of messages:
    Publish error
    An error occurred while publishing file "/Web/Sites/iWeb/Site 5/Welcomefiles/navbaractive.png".
    or
    Publish error
    An error occurred while publishing file "navbar_active.png." Try choosing >Publish all
    Can anyone suggest a solution. This is driving me mad.
    Tony

    Let's not mince our words: the version of iWeb we are using is ****** and there is no help available anywhere on the Apple website. Check out my various posts on this topic. I am going to save my work to disks and will not renew my iDisk account in a couple of weeks.

  • Publishing Web Pages in a Federated Portal

    Hi all,
    we´re running WPC pages in a Federated Portal. We create the pcd structure in the root system and publish the roles in the federated portal. For that we created web pages on the root system. As it isn´t possible to publish WPC pages in a federated portal, we created a WPC runtime iView for each of the pages.
    But, when we´re logged on in the federated portal only one of the iViews is visible.
    Can anyone help me out?
    Thx and Rgds,
    Andreas

    Hi all,
    we changed our mind an decided to build a new portal landscape for our project. So the problem doesn´t exist any longer.
    Cheers,
    Andreas

  • Error: unable to publish

    Hi,
    I/we need your help. Our office is using Contribute 3 on Win
    XP. We were able to publish last week and days before then but are
    unable to publish any pages today 2/12/07. Unfortunately, the only
    error message that display when we attempt to publish pages is as
    follows, "Publishing your draft to the server... An error occurred.
    Please contact your administrator." Let me know if you need further
    info or have any ideas for us to try.
    Thanks,
    Karl

    > Manoj,
    >
    > Thank you for your suggestion. I have tried it yesterday
    and am still
    > receiving the vague error message of 'An error occurred.
    Please
    > contact your administrator.' No error number to
    reference, just a
    > vague error message. But this is not an isolated
    incident. The entire
    > institute, including our office have not been able to
    publish since
    > Monday, 2/12/07 but were able to prior to Monday. No
    settings have
    > been changed. No servers have been updated or upgraded.
    I have
    > contacted Adobe yesterday and was informed that my
    Macromedia license
    > is not legitimate, this may play a role??? But, it
    shouldn't as one
    > agent had confirmed that it was registered with
    Macromedia. However,
    > if it does, Adobe should take action.
    >
    > Karl
    >
    Hi Karl,
    Can you send me the details about your server.
    Also have you installed any Windows patch ?
    Regards,
    Avinash

  • [Portal 7.4] WPC exception while publishing a page

    Hi all,
    I am having some troubles publishing some pages after I changed the content. These pages are located under: staging area --> area --> PAGE. The page was published before and I had to change some links in the content. Saving the changes works but I can't publish it. When I try to publish the page I get the error message "Exception caught during event invocation" (see screenshot). The page is localized. We have portal 7.4 SP 4
    Is is possible to see some logs to figure out what the problem is? I checked the NWA but can't find any logs concerning WPC.
    As far as I understood there were some problems in portal 7.0 and 7.3. I couldn't find any similar reported error with portal 7.4 SP 4.
    Thanks for any help!
    Andreas

    This was a simple lock error. After a day I couldn't reproduce the error anymore and WPC works fine since.
    Regards

  • How to publish news on a portal page of Oracle CS

    Hi everybody!
    Please help, how to publish news on a portal page of Oracle Collaboration Suite
    Thanks a lot for your helps.

    I have the resolution but don't have time right now to put it.
    Refer/search in
    metalink.oracle.com
    How To Edit The News Portlet     332930.1

  • Any iView to add WPC page in NW Portal 7.3?

    Hi All,
    Recently we have upgraded our portal from 7.0 to 7.3.
    In 7.0 i used to create an iView from com.sap.nw.wpc.runtime portal component,in the iView i use the RID of Compound Document to give the path of the WPC page in KM.Since i am adding WPC page to the iView i could able to use the  edit Page option.
    But in 7.3 there is an iview template WPC Web Content iView,with this i could able to add only the WPC content not the page because of that i am not getting the edit page option in 7.3.
    Anyother way to add the WPC page to the portal page.??Any body faced this issue??,Kindly help me to solve the issue.
    Naga

    Hi,
    since NW 7.3 SP9 it is possible to connect to a page not only to the area. The page itself has an id which you can use to connect to within a role. see here:
    http://scn.sap.com/community/netweaver-portal/blog/2013/04/10/wpc-pages-and-navigation-properties
    if you don't have SP9, you can achieve this as follows:
    1. create new iView from gpar:/com.sap.nw.pcc.mgr/default (this iview has ability to run wpc page via rid = path to runtime page), the old iview wpc.runtime.... will not work anymore.
    2. to find the rid of your wpc page you have to go to pcd inspector, path
       pcd: com.sap.portal.pcc/StagingAreaId/<yourarea>/ and click on "all properties" on the page you want to display. search for property com.sap.portal.pcc.rtObjectId
    copy this value to rid in the new iview and the page will be displayed with the new iview.
    if you have SP9, you don't need pcd inspector as the page id displayed in area management is the same as com.sap.portal.pcc.rtObjectId
    best regards,
    Lars

  • WPC: unable to add different resources with the same name into a WPC page

    Hi,
    I got a WPC problem when adding different KM resources with the same name into a WPC page.  Only one KM resource is able to be added in WPC.
    For example:
    There two "article.html" with different content and RID:
    1. /company_a/article.html
    2. /company_b/article.html
    when adding these two html pages into a WPC page, only one page will be shown.
    This means that a WPC page is not able to contain resources with same file names.  I think the problem might lie on the resource-linking mechanism of WPC. WPC will add a resource link in the page folder, when a new resource is drag&dropped into WPC.
    Anyone has some good ideas to solve my problem? Thanks a lot.
    Regards
    Lei NING
    Edited by: Lei NING on Apr 15, 2008 4:16 PM

    As this is not possible and double entries cause this problem, why not just pu both napes in the contact details on the same number. IE John Smith & Peter Jones all in the first name, by doing this if you search your contacts either by searching for john, peter, smith or jones the number will show up and if either calls the number will show John Smith & Peter Jones, it may not be perfect but will work. As the phone only recognises a number if two seperate entries of the number exist with different names it cannot possibly know who is calling ?
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Unable to add PDF docs into WPC pages?

    HI All,
    I'm using the Home Page layout in WPC to create a web page.
    But I'm not able to add PDF document in those pages.
    I added the MIME types to wpc_container_def_main1, ..main2 & ..main3 containers in Content Management configuration.
    But it didn't work.
    How do I add the pdfs then?
    Thanks
    Thruna Shanmuga

    Eduardo,
    Thanks for your reply.
    I know that we can create a KM document iview to access PDF/image/doc thru KM repository.
    But my requirement is, to add the PDF file directly in to WPC page for SAP Standard layout.
    Thanks
    Thruna Shanmuga
    Edited by: Thruna Shanmuga on Sep 3, 2009 9:03 PM

  • Multiple WPC page links are not displaying in DLN?

    Hi All,
    I created a site in WPC.
    I created 10 web pages under Web Pages folder.
    I created a navigation node for the first page and published the site navigation.
    Created a role in portal for the same.
    Now I can see the role and the first page in portal.
    I am unable to see the other pages as links in the Detail Level Navigation in portal.
    I want to see like below in DLN.
    Folder
    -- Page1
    -- Page2
    -- Page3
    -- Page3
    How do I accomplish this?
    Thanks
    Sundar

    Hey Thruna,
    In your example, are Folder1.. 3 each linking to its own "Web site"? This means, I gotto have a web-site per Folder.
    I found this in the [SAP Note 1142251|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1142251] which tells that..
    It is not possible to configure WPC to use resource path IDs (RIDs) instead of GUIDs.
    I think in SP15, you can't create a folder under "Site Navigation" and create Nav nodes under that. This means, the work around for me is to split my web-site into multiple web-sites and have folders created under Portal Role and have each folder point to a web-site as each web-site only has one site navigation (.wpc file).
    Correct?
    Btw, does anyone know if there is another way to link Portal role to WPC other than the "External Connector" property for Roles/worksets/folders?
    Thank you,
    Kiran

  • Get GUID in custom WPC page layout

    I'm developing a custom WPC page layout with an embedded Visual Composer flash file. Since KMC web pages are stored in KM I can use the KM Java API to access properties on the document in KM. I want to use this technique to let users store a value at design-time and use this value to generate the code to view the VC flash file at run-time. I've managed to get everything to work except for one small detail: The only way I've been able to get a reference to the document in KM (as an IResource object) is by reading the GUID from the URL, and this is only available at design-time and when previewing the WPC web page, not at run-time when the web page is opened through portal navigation.
    Does anybody know of a way to get the GUID (or any other reference) to the current KM document from a page (JSP file)? I have the page and WPC taglibs available, and of course the request object.
    Thanks,
    Terje Bjørgum

    It's all in the DOCTYPE declaration that  you see in a typical HTML page.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    SAP/WPC usually don't have this properly placed or is missing from any of the pages you create. Once you publish the page you created, view its source by right-click -> view source on the browser. You may be surprised that the DOCTYPE declaration is not there at all and the DOCTYPE declaration tells the browser how to render the page along with the CSS that you may have.

  • BI Publisher report page not getting displayed on ADF

    Scenario: OBIEE 11g integration to Webcenter Portal
    The Dashboard pages which are developed in Answers are getting displayed correctly to ADF Page.
    ISSUE: But a dashboard page with BI Publisher report page displays error 404 on integration to ADF Page via BI Presentation services connection.
    This BI Publisher report shows up without any errors on the OBIEE Dashboard Page.
    thanks
    Reshmi

    Hi,
    kindly refer the below one
    http://www.rittmanmead.com/2011/05/oracle-bi-ee-11-1-1-5-new-jdeveloper-extensions/
    http://jdevelopertips.blogspot.com/2009/08/integrating-bi-publisher-into-jdevelo.html
    Thanks
    Deva

  • Pictures in WPC pages cannot be shown suddently!

    Hi gurus,
    I finally figured out the anonymous access of our external portal(EP 7.0 SP13 on solaris) last night, and all our WPC pages can be seen with anonymous user. But this noon, suddently the logon screen went out when we access it. We don't know what happened for it.
    Then i checked it all over again and found wpc runtime iview's authentication scheme was default, after i changed it back to anonymous, the page showed, but all the pics include in the page could not be shown, anybody can help me on it?
    I checked the pic's property, it showed url like http://<host>:<port>/irj/servlet/prt/portal/prtroot/docs/guid/c0723348-85a6-2a10-ad94-fc0406a9fb71, when i paste this url in a new window, it show me login screen, that means it wasn't be accessed by anonymous user.
    What i did is:
    1. change it according to note 837898
    2. Configuration in PCD - go to Content Administration -> Portal Content-> Portal Content -> Web Page Composer -> Container iViews -> WPC
    Default Containers. All of the iViews in this location should have the
    "anonymous" authentication scheme. The next location which should be
    checked is Content Administration -> Portal Content -> Portal Content ->Web Page Composer -> iView Templates. Again all of the iViews should
    have the "anonymous" authentication scheme. The same applies to all the
    templates which reside in Content Administration -> Portal Content ->
    Portal Content -> Web Page Composer -> Page Layout Templates. Finally
    check if all the pages which reside in Content Administration -> Portal
    Content -> Portal Content -> Web Page Composer -> Page Layouts have the
    "anonymous" authentication scheme.
    3. Security zones - if you go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and you open the
    permissions of this object, the Anonymous Users group must be added in
    the list. 
    4. pcd: portal_content/com.sap.pct/every_user/general/iViews/com.sap.km.i
    views/com.sap.km.urlaccess/com.sap.km.docs and change the authenticaton scheme to 'Anonymous'. 
    number 2&3 come from this Link:[thread|Re: Web Page Composer Anonymous site error :'wpc:getDisplayName';
    number 4 from Link:[here|/message/4490255#4490255 [original link is broken];
    I checked every place that i can find from this forum, but still cannot get the pics show again. Thanks.
    Best regards
    Peter

    Very damn, after restart the whole server, then it come back again.

  • Workspace user can't open a published Private Page or create his own Page

    The end user is using version 11.1.2 of Hyperion Workspace.
    My question is: Why can't this user create a Private Page or open a published Private Page from another user. When trying to open a published Priavte page from another user, the user gets this error message:
    +"Unable to perform request+
    +An error has occurred accessing a protected resource. You do not have the necessary permission.+
    +Detailed Message: WSCommandProcessError+
    +Recommended Action: Contact your local security administrator or resource owner."+
    I have checked the security on this user in HSS, and made him Adm user for Work space, without solving this problem.
    Can someone give me a hint on where to look or how to solve this issue?
    Mo
    Edited by: 875661 on Aug 20, 2012 1:48 AM

    Hi,
    Did you check if your app is set to maintenance mode in planning web console?
    -Go for Administration-->application settings--->Application maintenance mode-->make sure the application is enabled for "all users".
    If this happens for the first time after you create users, the security might not have refreshed to planning from shared services.
    -Go for Administration-->Dimensions-->select a member-->assign access-->choose" Migrate Identites" ( this should refresh the security from shared services to planning).
    Hope this helps,
    -Nra

Maybe you are looking for