Unable to Push the Config Frm NCS prime to CIsco WIreless Lan Controller

Hi Guys,
We have an issue with NCS prime, in our Network.
We run NCS prime 1.3 and Around 10 Wireless Lan Controllers (5508 & 4404) Models.
We are trying to Push a ACL Config Template from NCS to Wireless lan Controllers.
This ACL is already created before in WLCs, now we created the templates in NCS with few rules added and planning to push Configs from NCS template.
We are receiving errors SNMP operation to device failed. I am pretty sure it is not an SNMP issue.
Any inputs on this is much appreciated

Hi Scott.
I
I tried deleting the ACL from Controller totally and tried pushing it. it was not working neither
Raised a case with Cisco. They asked for few trace logs from NCS , told will check and get back to me.
IS there any more inputs, you can provide, which i can try to test it?
Regards
Safwan

Similar Messages

How to push the config from WCS to WLC

Hi Everyone
sorry a total noob here. I had to reset factory my WLC. how can I download the config from WCS? Cisco Prime? I have the config backed up there but I cant see an option to push the config
thanks alot

If the device is already in the Prime Infrastructure, you can open it in Device work center and select the device > use the configuration archive option > scheduled deploy.
Also, the Prime Infrastructure Plug and Play feature allows you to perform an initial provisioning of a software image and configuration on a new device. For more details check :
Automating Device Deployment Using Plug and Play Profiles
Working with Device Configurations
-Thanks
Vinod

Issues after changing the AP Name on Wireless LAN Controller

I recently changed the AP Name of all the Wireless Access Points in my branch office (which are all associated to the branch office Wireless LAN Controller(s)). After that I noticed that all branch office employees are unable to connect to the employee SSID. The employee SSID uses web authentication and employees are authenticated using Head Office AD via Cisco ACS, both located at the Head Office.
There are other SSID's on the WLC which all work fine, but only employee SSID which uses AD authentication does not work. AD authenticaion is working fine because employee's in HO are successfully able to connect to the employee SSID at HO.
The branch office is connected to the HO via a tunnel link. We noticed that if we restart both the ASA at either ends of the tunnel. The employee SSID starts working again but only temporarily for a day or so... what could be the issue? Can renaming the AP's cause issues? How can I fix this problem?
Thanks in advance

Thanks Elliott,
I did the debug like you said and I am getting the following debug messages:
*apfMsConnTask_0: Jun 20 08:18:14.580: Deleting the client immediatly since WLAN is changed
and also
*apfReceiveTask: Jun 20 05:25:11.857: 00:1f:3c:86:af:15 Orphan Packet from 192.168.52.34
The logging on the WLC shows
*apfReceiveTask: Jun 18 17:56:41.788: %MM-1-ANCHOR_UNAVAILABLE: mm_mobile.c:2155
All export anchors are down. Cannot anchor the client.00:c0:a8:f3:cd:ae
The DHCP pool for the employee users are configured on a guest WLC which sits behind an ASA

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

AIR-CAP3501I access point not joining the Cisco 2100 Wireless Lan controller.

Hello All,
I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP.
Please find my network setup as below:
The ISP ADSL modem , WLC and LAP are connected to a unmanaged POE switch. The LAP gets its power through the POE switch. When i connect the LAP and the WLC to the switch along with the ADSL modem, the LAPs are getting the ip address from the ADSL modem, however they are not joining the WLC for further process.
ADSL Modem ip address: 192.168.1.254
Management ip address on the LAP: 192.168.1.1 ( Assigned to port 1, untagged Vlan).
Ap Manager ip address: 192.168.1.1 ( Assigned to the same port i.e port1, Untagged Vlan).
The LAP is getting an IP address from the ADSL modem in the range of the DHCP scope.
I will paste the logs very soon.
Please let me know if i am doing anything wrong oe what will be the issue.
Thanks in advance,
Mohammed Ameen

Hello All,
Please find the logs for "debug capwap event" from the WLC below:
*spamReceiveTask: Sep 26 19:44:59.196: e8:04:62:0a:3f:10 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join Response sent to 192.168.1.156:45510
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:44:59.198: e8:04:62:0a:3f:10 Register LWAPP event for AP e8:04:62:0a:3f:10 slot 0
*spamReceiveTask: Sep 26 19:44:59.341: e8:04:62:0a:d1:20 DTLS connection not found, creating new connection for 192:168:1:158 (45644) 192:168:1:2 (5246)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 DTLS Session established server (192.168.1.2:5246), client (192.168.1.158:45644)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 Starting wait join timer for AP: 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.121: e8:04:62:0a:d1:20 Join Request from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 Join Response sent to 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:45:00.125: e8:04:62:0a:d1:20 Register LWAPP event for AP e8:04:62:0a:d1:20 slot 0
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 Configuration Status from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 CAPWAP State: Configure
*spamReceiveTask: Sep 26 19:45:00.273: Invalid channel 1 spacified for the AP APf866.f2ab.24b6, slotId = 0
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP info for AP e8:04:62:0a:d1:20 -- static 0, 192.168.1.158/255.255.255.0, gtw 192.168.1.254
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP 192.168.1.158 ===> 192.168.1.158 for AP e8:04:62:0a:d1:20
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Setting MTU to 1485
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Finding DTLS connection to delete for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Disconnecting DTLS Capwap-Ctrl session 0xa06d6a4 for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 CAPWAP State: Dtls tear down
*spamReceiveTask: Sep 26 19:45:00.277: spamProcessGlobalPathMtuUpdate: Changing Global LRAD MTU to 576
*spamReceiveTask: Sep 26 19:45:00.277: e8:04:62:0a:d1:20 DTLS connection closed event receivedserver (192:168:1:2/5246) client 192:168:1:158/45644).
The Acess point joins the Controller for 2-3 seconds and then unjoins again. I am not sure what i am doing wrong here. The access points are getting the IPs from the ADSL modem through the switch, then it talks to the WLC, however it does not join the controller for further process.
Note:
The Managemnet interface and the AP manager interface are assigned to the same port 1 with unassigned Vlan as mention above.

Wrt54g ver5, unable to access the config pages

wrt54g ver5
firmware ver 1.02.5
i am unable to access the internal web pages on wrt54g ver 5
can access the internet fine. it seems to be a memory corruption problem
i has been doing more and more times

Since the router works, it is doubtful (but still possible) that the firmware is corrupted. More likely there is another explanation for your problem. Here are my tips for viewing your router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Unable to push the changes to server(Git)

Hi,
I am facing some problem while push code changes to visualstudio online version control. Please see the error details
An error occurred. Detailed message: Response status code does not indicate success: 502 (Connection reset by peer)
Can anyone please help me solve this issue.

Hi DPKCAP,
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,

Unable to view the report in Report builder

Hi
we have developed a report and when we run it using developer suite 10g reports,
the previewer opens but we are unable to see the data completely which is hidden by the
Runtime parameter form.
Please let us know how to hide this when we are viewing the report previewer.
Thanks

Thanks
ok, got it .If we open in paper layout it works.
But now when we run the report as client server we are getting error unable to run the report frm-41214
our code is when button pressed.
DECLARE
repid REPORT_OBJECT;
repjobid VARCHAR2(200);
repstatus VARCHAR2(200);
repjobno number;
repserver VARCHAR2(100) := 'rep_mbxserver_FRHome1';
BEGIN
repserver := 'rep_mbxserver_FRHome1';
message('client server');
repid:= FIND_REPORT_OBJECT('rep');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'\\mbxserver\Developers\emp.rdf'); --(Appl.server path)
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\joe\mtb-erp\emp.lis'); --(Local pc path in lan)
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=YES');
/* Report to be executed via Reports Background Engine, not the 'new' Reports Multi-Tier Server */
/* Destype SCREEN or PREVIEW can be used here */
--SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,SCREEN);
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
copy_report_object_output(repjobid,'\\joe\mtb-erp\emp.lis');
message('File ok');
host('c:\mtb-erp\emp.lis'); -- Try to open the file locally
END;
Please guide us what ie the error and how to proceed.
Thanks in advance.
Edited by: ansu on 20-May-2009 23:24

How do I disable Autocomplete using the config files - NOT by using Options Privacy...

Hi,
I have around 300 computers around the country which need the Autocomplete feature turning off for forms.
Obviously it wouldn't be practical to remote onto each machine and change the setting in Options > Privacy > Firefox Will... > Use custom settings for history > Remember search and form history - nor is it practical to use the about:config screen since the address and toolbars are disabled by default to prevent users from browsing to other pages they aren't meant to.
I was wondering if there was a config file or a registry setting where I can change this setting in the backgorund, that way we can push the config files or a registry tweak out the all machines that would change this setting.
Any help would be appreciated greatly.
Dan

I can see where those answers are going, there must be an easy way to do it using js config files or userChrome.css.though.
I tried doing an entry in userChrome whereby it hides the autocomplete box by overriding the pages stylesheet but the entry only seemed to work on a per domain basis... however the site that the browsers will be using is an intranet and therefore each PC will have a different URL to go to - making it impractical for masses of machines. Not sure if this can be worked upon to apply to every site?

Unable to view the contents in NQS Config file

Hi Forum,
After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
So please guide me in resolving this issue.
Regards
Cool j

You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

Not able to Start Hyper-V(2012 R2) VM when placing the VM config file on Samba Share,Its giving error:Unable to initialize the saveset

---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
".vhd" on this , VM succesfull created and started. However when I placed the VM config files on this (samba) shares VM created successfully but its not starting, Its giving error like Unable to initialize the saveset -- Any idea how to place the
Hyper-V VM config files samba share?

Hi Rakesh KK,
Please confirm your share meet the Serve 2012r2 Hyper-V requirement, you can refer the following KB to get more detail require conditions.
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FRM-40509: ORACLE error : Unable to update the record.

Hi,
I am having the following code in delete button.
declare
     v_button NUMBER;
begin
IF :CHNG_CNTRL_JOB_DTLS.SENT_DATE IS NULL THEN
               v_button := fn_display_warning_alert( 'Do you want to delete the version ?');
               IF ( v_button = alert_button1 )
                    THEN
                      message('before insert');
                      insert into chng_cntrl_job_dtls_log
                      select * from chng_cntrl_job_dtls
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before delete');
                      delete from CHNG_CNTRL_JOB_DTLS
                      where job_name = :CHNG_CNTRL_JOB_DTLS.job_name
                      and job_version_no = :CHNG_CNTRL_JOB_DTLS.job_version_no
                      and sent_date is null;
                      message('before commit');
                      silent_commit;
                      go_item('CHNG_CNTRL_JOB_DTLS.JOB_NAME');
                      P_DELETE_SET_PROPERTY;
                      clear_form;
               ELSIF ( v_button = alert_button2 )
                    THEN
                      null;
            END IF;
     ELSE
            p_display_alert('Version '||:CHNG_CNTRL_JOB_DTLS.JOB_VERSION_NO||' for the job name '||:CHNG_CNTRL_JOB_DTLS.JOB_NAME||' cannot be deleted.','I');
END IF;
     exception
          when others then
          message ('Exception in delete version button');
          end;when i am trying to save it says " *FRM-40509: ORACLE error : Unable to update the record*." .
i am getting message till before commit.
i am not able to check the error message in help as it is diabled in our form builder.
I have checked the privileges also. they are fine.
Please advice.
Edited by: Sudhir on Dec 7, 2010 12:26 PM

This error does not come from your procedure code, but from Forms itself. If you are in a database block, change something, and do a commit (either via a Forms key or in your own procedure), Forms commits the changes. For some reason this is not possible. You can see the database error via the Display Error key (often Shift-F1).
I see in the OP that this key is disabled. Change the on-error code then:
begin
   message(dbms_error_code||'-'||dbms_error_text);
   raise form_trigger_failure;
end;     Edited by: InoL on Dec 7, 2010 8:50 AM

Whenever i open certain apps i get the connect to itunes for push notifications over and over again and im unable to play the game, how do i fix this?

hey guys i have a question,
so i have the same problem for two of my apps, one is biike race, and the other game is snap chat. so each time i open one of these games i repeatedly get the "connect to itunes for push notifications" box coming up, and im unable to play the game, and i have to click my home button multiple times to get back to the main screen. i dont understand why this is happening and maybe you could help me out.

There are a few other threads in this forum regarding this issue. It appears to me that this was once an issue with the iPhone, but has now started up again after the upgrade to iOS 4. My iPod Touch is ~ 2 years old and has had absolutely no problems. It is not jailbroken or altered in any way.
This pop-up started for me after upgrading to iOS 4. I did the restore to factory, reinstalled my apps and the problem returned. It appears my push notifications are working, which is good, but I have to click through the pop-up every time I enter an app that uses notifications.
This will go away when Apple fixes it.

Cisco NCS Prime upgrade error : "% Manifest file not found in the bundle"

Hello ,
I am currently trying to upgrade my NCS software from 1.0.1.4 to 1.1.1.24 using the upgrade bundle .
Running the upgrade procedure i receive the following error message :
|---------------------------------------------------------------------------------------------------------------------------|
CPNCSSRV/admin# application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz ncs-ftp-repo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
|---------------------------------------------------------------------------------------------------------------------------|
Just to make it clear :
1. the .tar file isn't corrupted
2. there are no typo's
3. the repository is fine
Any ideas would be appriciated .
Thanks ,

Hi,
In case anyone encountered the same problem, here is how you solve it:
1- Login into shell by typing "shell command" from NCS enable mode.
2- Copy the installation zip file to local disk directory:
        cp /source-path/name/installation-file-name.zip /localdisk
3- Browse to localdisk directory which exists in the root directory and unzip the zip installation file:
          [LMS/root-ade localdisk]# unzip installation-file-name.zip
4- Exit shell by typing "Exit"
5- At this step, if you type the "dir" command, the installation file "NCS-upgrade-bundle-1.1.1.24.tar.gz" should appear.
6- In "conf t" mode, create a new repository
   repository myrepo
          url disk:/
7- application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz myrepo
Please rate if you find helpful.
Thanks.
Moath Rawashdeh

Unable to find the specified site during the client push installation

Hi,
One of the users at my site is trying to push the client but for some reasons, the site tab is showing blank.
Please assist!

Hi,
Please make sure you can see the sites in Site Configuration of Administration workspace when you login with the user.
You could try to grant the permissions as the blog moutaz ibrahim provided to another user to see whether this user can see the site.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to Push the Config Frm NCS prime to CIsco WIreless Lan Controller

Similar Messages

Maybe you are looking for