Unable to reach SAP server

Hi,
Need some input for trouble shooting the problem we are facing.
The SAP instance is running on Unix server. Now, we could not reach server from SAP Logon pad. It is timing out.
But we could ping the system. Also could logon as admin to sap and see the instances are all running.
Is there any processes to trouble shoot the issue?
Thanks,
Sam

Hi Sam...
Check that your DB is up and running, (open a telnet session and logon as <sid>adm run R3trans -d, if return code is 0000 DB is ok, if not check the DB
Also check logs dev_disp, dev_ms, and dev_w0
hope this help
Juan
Please reward with points if helpful

Similar Messages

Unable to reach Application Server. Contact your admin ( ERR WIJ 20010 )

Hi all,
When i am using web intelligence in infoview, i am getting the following error.
Unable to reach Application Server. Contact your administrator ( ERR WIJ 20010 ).
I have logged in using admin credentials.

Hi everyone.
Could I get a quick reply if this is still an issue for you all? If it is not, has anything changed in your environment. I have one person reporting this now.
Full log:
Version:12.1.8.1176
Application server:
............cdzisapi.wis
Stack trace:
java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at com.businessobjects.wp.cpi.CPIConnection.postRequest(Unknown Source)
at com.businessobjects.wp.xml.XMLViaHttp.loadScript(Unknown Source)
at com.businessobjects.wp.xml.XMLViaHttp.ping(Unknown Source)
at com.businessobjects.wp.xml.XMLSession.ping(Unknown Source)
at com.businessobjects.wp.om.OMSessionLoader.ping(Unknown Source)
at com.businessobjects.wp.tc.thread.PingRunner.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
BOE 3.1
Windows 2003 SP2
Tomcat 5.5.2
IIS 6
.net Framework 2
SQL Server 2005
Edited by: Terri Hoffmeyer-Ramos on Sep 12, 2011 9:57 PM

My adobe cc keeps telling me that its unable to reach the server

my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs

Mybe,because you did not installed well,or because the server does not work propperly at that time!

Unable to reach POP server from Time Warner cable

For over a week, I have been unable to access my email server using my home Time Warner cable through outlook. My settings have not changed and I can access webmail. Has anyone had this problem and has anyone been able to find a solution?
Solved!
Go to Solution.

It is definitely a Verizon problem. You must reach someone in technical support and have them send a trouble ticket to the email server department. they need to release the IP address from any restrictions. This is what I did, and it was fixed in 24 hours. You must tell them your IP address.

Unable to find SAP Server in SAP Management Console

Hi
I installed NSP Server in my Windows XP i used to work on this system.
I downloaded 90days licence from SAP site and it is valid upto 20060701.
Today we i try to start NSP Server using SAP Management Console there is server appearing in the tree which is usually appear in left panel.
Could any body help me how retrive the Server in SAP Management Console
Thanks
Uma

Hi uma
check the following service is running under windows service manager.
control panel->Administrative tool ->services
find the following service
sapnsp_instance number.
this service might be stop. start it.
also check the logon information for service.
now check the sap MMC.
regards,
kaushal

Unable to reach requested server

2 weeks ago my bb suddenly wouldn't access the internet via my bt home hub 3 wireless access since is very sporadic. I have tried resetting and powering off the hub and the bb works for a while then drops again, bt have checked the line
and they say it's a bb issue can anybody assist please
Solved!
Go to Solution.

And this issue is constant? Or sporadic?
In any event, please first try this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then please try other WiFi networks, as well as browsing via your carrier data plan. If it works via other means, then it is much less likely to be a BB issue.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

Unable to start SAP

Hi Everybody,
I am unable to start the SAP after i changed some parameters in RZ10,the sapcpe program starts & immediately stops,the message server & enqueue server is running.But the dispwork.exe & igswd.exe is stopped,dispwork.exe is showing :"unable to reach the message server."
The dev_w0 & dev_ms file is given below:
Kindly help.
dev_ms
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 860] Tue Jun 12 12:20:09 2007
[Thr 860] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 1612
[Thr 860] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1612) [msxxserv.c 1824]
[Thr 860] Tue Jun 12 12:20:10 2007
[Thr 860] load acl file = C:\usr\sap\SM7\SYS\global\ms_acl_info.DAT
[Thr 860] MsGetOwnIpAddr: my host addresses are :
[Thr 860] 1 : [172.16.1.95] SolMan (HOSTNAME)
[Thr 860] 2 : [127.0.0.1] SolMan (LOCALHOST)
[Thr 860] MsHttpInit: full qualified hostname = SolMan
[Thr 860] HTTP logging is switch off
[Thr 860] set HTTP state to LISTEN
[Thr 860] ms/icf_info_server : deleted
[Thr 860] *** I listen to port sapmsSM7 (3601) ***
[Thr 860] *** I listen to internal port 3901 (3901) ***
[Thr 860] *** HTTP port 8101 state LISTEN ***
[Thr 860] CUSTOMER KEY: >W0261783128<
[Thr 860] Tue Jun 12 12:21:01 2007
[Thr 860] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 860] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 2856] Wed Jun 13 12:06:32 2007
[Thr 2856] MsSExit: received SIGINT (2)
[Thr 2856] ***LOG Q02=> MsSHalt, MSStop (Msg Server 1612) [msxxserv.c 5938]
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Jun 12 12:20:23 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SM7\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\SM7\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SM7\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 01
M sid SM7
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 1804
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1804) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 12672 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06000040, size: 4647736)
M DpShMCreate: allocated sys_adm at 06000040
M DpShMCreate: allocated wp_adm at 06001E40
M DpShMCreate: allocated tm_adm_list at 06004FC0
M DpShMCreate: allocated tm_adm at 06004FF0
M DpShMCreate: allocated wp_ca_adm at 063D4290
M DpShMCreate: allocated appc_ca_adm at 063DA050
M DpShMCreate: allocated comm_adm at 063DBF90
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0645CE50
M DpShMCreate: allocated gw_adm at 0645CE90
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0645CEC0
M DpShMCreate: allocated wall_adm at 0645CEC8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host SolMan
M calling db_connect ...
C Prepending C:\usr\sap\SM7\DVEBMGS01\exe to Path.
C
C Tue Jun 12 12:20:26 2007
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DB7 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 065A0218 065A57B4 065A503C
C Attaching to DB Server DB7 (con_hdl=0,svchp=065A4F88,svrhp=065B6854)
C
C Tue Jun 12 12:20:27 2007
C Starting user session (con_hdl=0,svchp=065A4F88,srvhp=065B6854,usrhp=065CB5A8)
C Now '/@DB7' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=065A4F88,usrhp=065CB5A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DB7 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 065A0218 065A57B4 065A503C
C Starting user session (con_hdl=0,svchp=065A4F88,srvhp=065B6854,usrhp=065CB5A8)
C Now 'SAPSR3/<pwd>@DB7' is connected (con_hdl 0, nls_hdl 0).
C
C Tue Jun 12 12:20:28 2007
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DB7 is running on SOLMAN with ORACLE version 10.2.0.1.0 since 20070612
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070612 122023 SOLMAN
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jun 12 12:20:34 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AB90040, size: 4400000)
M SHM_ROLL_AREA (addr: D3290040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AFD0040, size: 32768000)
M
M Tue Jun 12 12:20:35 2007
M SHM_ROLL_ADM (addr: 0CF20040, size: 615040)
M SHM_PAGING_ADM (addr: 0CFC0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D050040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D0E0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 112700C8, size: 30000000, end: 12F0C448)
B dbtbxbuf: Buffer TABLP (addr: 12F100C8, size: 10240000, end: 138D40C8)
B dbexpbuf: Buffer EIBUF (addr: 138E00D0, size: 4194304, end: 13CE00D0)
B dbexpbuf: Buffer ESM (addr: 13CF00D0, size: 4194304, end: 140F00D0)
B dbexpbuf: Buffer CUA (addr: 141000D0, size: 3072000, end: 143EE0D0)
B dbexpbuf: Buffer OTR (addr: 143F00D0, size: 4194304, end: 147F00D0)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jun 12 12:20:37 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 19C02060
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S
S Tue Jun 12 12:20:38 2007
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DE600A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DE60330
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4968kb, dir_size: 4928kb.
A Attached to PXA (address D6D30040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Tue Jun 12 12:20:40 2007
A ABAP ShmAdm attached (addr=FACF4000 leng=20955136 end=FC0F0000)
A >> Shm MMADM area (addr=FB169DD8 leng=126176 end=FB188AB8)
A >> Shm MMDAT area (addr=FB189000 leng=16150528 end=FC0F0000)
A RFC Destination> destination SolMan_SM7_01 host SolMan system SM7 systnr 1 (SolMan_SM7_01)
A RFC Options> H=SolMan,S=01,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 9514 bytes at 0FFF0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SM7\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\SM7\DVEBMGS01\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N
N Tue Jun 12 12:20:41 2007
N ===...sucessfully completed.
N =================================================
N
N Tue Jun 12 12:20:42 2007
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume SolMan_SM7_01
E
E Tue Jun 12 12:20:43 2007
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Jun 12 12:20:54 2007
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05F10040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05F107A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05F107E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05F107EC
S
S Tue Jun 12 12:21:00 2007
S server @>SSRV:SolMan_SM7_01@< appears or changes (state 1)
B
B Tue Jun 12 12:21:03 2007
B table logging switched off for all clients
A
A Tue Jun 12 12:23:45 2007
A RFC FRFC> fallback on the central gateway SolMan sapgw01 activ
B
B Tue Jun 12 12:29:43 2007
B dbmyclu : info : my major identification is 3960471903, minor one 1.
B dbmyclu : info : Time Reference is 1.12.2001 01:00:00h GMT.
B dbmyclu : info : my initial uuid is B72492363DCA9542AE1A8272B3631C24.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
S
S Tue Jun 12 12:45:43 2007
S found spool memory service RSPO-ACTIONS at 1DE699F8
A
A Wed Jun 13 05:00:45 2007
A generated report RSCUECRM with fingerprint F5EC62C2673C7A1E16F13E3D9F26AF06| 15661
A
A Wed Jun 13 05:00:47 2007
A generated report CRMCUE_BUPA with fingerprint 484635D63005669D331000290B550AC5| 32062
A
A Wed Jun 13 05:00:49 2007
A generated report RSXRPM with fingerprint B51066CF7A08AD68AE5E9B8B7F0181B2| 16973
A generated report RPM_COLLECTOR_RUN with fingerprint B44F1BA6A58D78D1210BD462D9403C11| 15679
A
A Wed Jun 13 05:00:52 2007
A generated report SAPLRPM_UTILIZATION with fingerprint 803022D674431D7401FDDC27DF66C2D2| 23200
A
A Wed Jun 13 05:01:05 2007
A generated report SAPLRPM_PROJECT_DATA with fingerprint F0E89C8100CFAA3A6831E5C629471D81| 366049
A
A Wed Jun 13 05:01:08 2007
A generated report CX_RPM_CUSTOMIZING_ERROR======CP with fingerprint 34CADF16BEE5936317C29027D4FB3038| 9864
A generated report CX_RPM_FATAL_ERROR============CP with fingerprint 722CC02C9499AD12A3974DB1C436E966| 13716
A
A Wed Jun 13 05:01:09 2007
A generated report SAPLRPM_CP with fingerprint F1C912E0ED3C559B21F68184DBB79AF9| 80352
A
A Wed Jun 13 05:01:10 2007
A generated report CL_RPM_CO=====================CP with fingerprint D2D73476CA50CB2E7C2AEF0F70F48E14| 35016
A
A Wed Jun 13 05:01:12 2007
A generated report CL_RPM_MESSAGE_SERVICES=======CP with fingerprint 2C23208B669EFE59AB8CCB53DCA553D8| 19694
A
A Wed Jun 13 05:01:15 2007
A generated report CL_CGPL_APPLICATION_LOG=======CP with fingerprint C8731BC4ECF2EE6D4BFB39DD9F34102F| 37022
M
M Wed Jun 13 12:06:06 2007
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M ThExecShutDown: perform exclusive shutdown actions
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, SolMan_SM7_01 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: commit and keep resources
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: called rsau_log_system_stop
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20070612 122023 SOLMAN
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=065A4F88,usrhp=065CB5A8)
C Detaching from DB Server (con_hdl=0,svchp=065A4F88,srvhp=065B6854)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=8755, com_tx=1718)
B statistics db_con_rollback (roll_total=100, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1804) [dpnttool.c 327]

Hi Ben,
The sapcpe .log file is showing like this :
INFO: sappardem:
INFO: sapargv:
INFO: sapargrem:
INFO: sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#9 $ SAP
WARNING: unknown SAPSYSTEMNAME from the profiles
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory
SolMan\sapmnt
SYS\exe\UC\NTI386\sapcpeft
INFO: not found any file table.
=========================================================
Update Local Programs (incl. directory sync + pathnames)
=========================================================
Starting at 2007/06/18 12:51:01
ERROR: can't change to local Executable-Dir
SolMan\sapmnt
SYS\exe\run (No such file or directory) 2 [sapxxcpe.c:1267]

Design Time Connection of SAP Server failure using TIBCO Designer

Hi All,
While Connection to SAP Server using TIBCO Designer using Design Connection Configuration followed error we are facing.
Connection Error. Unable to Create a Connection with the target application bdhn4973.na.pg.com using connection parameters
programID=BWAH-IFS-L6A430 gatewayService=sapgw00 and the target application error is 102RFC_ERROR_COMMUNICATIONConnect to SAP gateway failedConnect_PM TPNAME=BWAH-IFS-L6A430, GWHOST=bhdn4973.na.pg.com, GWSERV=3300LOCATION CPIC (TCP/IP) on local ost with Unicode ERROR partner 'bdhn4973.na.pg.com:3300' not reached TIME Mon Jul 18 03:28:21 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40RC - 10 MODULE nixxi.cppLINE 3284DETAIL NiPConnect2: 155.125.167.58:3300SYSTEM CALL connectERRNO 239 ERRNO TEXT Connection refusedCOUNTER 6
Note: SAP Server is running but still we are not able to connect from TIBCO Designer. Few times it's able to connect and few time it will throw an error while connecting to SAP Server.
Can you please help me if any one you have any idea regarding this.
Regards,
Vijaya

Hi,
Since you are able to connect, seems the issue with network instability.
1) Create an RFC connection and perform the connection test. Note down the time taken (milli seconds), a notable delay also can be the cause of the issue.
2) Do the ping from Tibco system to SAP and note down the time taken
3)Also check the firewalls in between the two systems and check the valid access
You may need Nework admin teams help to cross check these.
Regards,
Syed

Unable to reach Adobe servers, Please check firewall settings and try again

I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
I do not have any firewalls on my network.
I've uninstalled all previous versions of the applications.
The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.

I'm having the exact same problem. Photoshop is stuck at 0%.
Have the links for direct download changed? When I went to http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
Photoshop CC 2014 (64-bit)
740 MB
File 2
801 MB
File 1
and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server."

Unabl to start sap (DISP+WORK Stopped) While installing/importing database

Dear Experts, As iam installing/ importing windows ecc 6.0 sr3 & DB2 9.5 ( Database exported using Hetrogeneous system copy from sqlserver 2005 to DB2), All phases finished and finally start sap failed due to db connect failure and i have tried by mmc and command mode but no hope. . Kindly help. trans log file and dev_w0 files below.
_Trans log file_
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2009 - 05:15:05
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:07 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9294 0.009294
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 41 0.009335
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 25 0.009360
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009383
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 641 0.010024
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010076
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.010162
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010193
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010217
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.010257
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:08 2009 472441 0.482698
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 51 0.482749
4 ETW000 35 0.483487
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260) 24 0.483511
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892) 25 0.483536
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743) 24 0.483560
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 34 0.483594
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568) 24 0.483618
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847) 24 0.483642
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574) 24 0.483666
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852) 24 0.483690
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102) 24 0.483714
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779) 25 0.483739
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194) 24 0.483763
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 37 0.483800
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 88 0.483888
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 35 0.483923
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 35 0.483958
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 35 0.483993
4)
4 ETW000 35 0.484718
4 ETW000 [dev trc ,00000] (0.198) DB6: patch collection 02/09 (note 1294443) 24 0.484742
4 ETW000 [dev trc ,00000] (0.201) DB6: cobra enhancements (note 1315762) 24 0.484766
4 ETW000 [dev trc ,00000] Supported features: 20 0.484786
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 28 0.484814
4 ETW000 [dev trc ,00000] ..done 475 0.485289
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 22 0.485311
4 ETW000 [dev trc ,00000] Running with CLI driver. 376278 0.861589
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 373762 1.235351
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 2467 1.237818
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 520 1.238338
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 44597 1.282935
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 50 1.282985
4 ETW000 [dev trc ,00000] Database code page is ok. 480 1.283465
4 ETW000 [dev trc ,00000] Tue Oct 06 05:15:09 2009 241001 1.524466
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 38 1.524504
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 45663 1.570167
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 35785 1.605952
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 255 1.606207
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 27 1.606234
4 ETW000 [dev trc ,00000] INFO: Unable to determine SAPDBHOST; defaulting to 'UNKNOWN' 20363 1.626597
4 ETW000 Connected to database.
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 72901 1.699498
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2049 1.701547
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=19; appl_id="10.0.0.146.44548.091006101508"
4 ETW000 46 1.701593
4 ETW000 [dev trc ,00000] Disconnected from connection 0 79 1.701672
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 121 1.701793
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 24 1.701817
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 06.10.2009 - 05:15:09
dev_w0 file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Oct 06 05:07:11 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3572
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3572) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Tue Oct 06 05:07:12 2009
M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]
M
M Info for wp 0
M
M pid = 3572
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Oct 06 05:07:12 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3572) [dpnttool.c 333]
Thanks in advanc
Chidam

Dear experts, As i have updated as per yours inputs and still unable to start sap. Kindly help.
1. SAPDBHOST is now accepting and there is no issues on "SAPDBHOST unknown."
2. dscdb6.conf file is available and it has all permission (including login userlevel)
3. dscdb6.conf was recreated new and tried, still dev_w0 shows
"M ThInit: running on host mascon-sap2
M calling db_connect ...
C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf' "
4. Environment variable all were added.
Tans log file
4 ETW000 r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.10.2009 - 06:34:10
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:12 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 9419 0.009419
4 ETW000 [dev trc ,00000] using "E:\usr\sap\SA4\SYS\exe\uc\NTAMD64\dbdb6slib.dll" 33 0.009452
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 24 0.009476
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll 23 0.009499
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.201) 635 0.010134
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll 26 0.010160
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll 26 0.010186
4 ETW000 [dev trc ,00000] New connection 0 created 36 0.010222
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 60 0.010282
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.010313
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 24 0.010337
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.010378
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:13 2009 473631 0.484009
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '
mascon-sap2\sapmnt\SA4\SYS\global\db6\WINDOWS_AMD64\db6_clidriver\bin\db2app64.dll' successfully loaded
4 ETW000 57 0.484066
4 ETW000 [dev trc ,00000] Supported features: 21 0.486055
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 21 0.486076
4 ETW000 [dev trc ,00000] ..done 491 0.486567
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 21 0.486588
4 ETW000 [dev trc ,00000] Running with CLI driver. 329019 0.815607
4 ETW000 [dev trc ,00000] DB2 client driver version '09.05.0004' 266666 1.082273
4 ETW000 [dev trc ,00000] Connected to DB server type 'DB2/NT64' 3005 1.085278
4 ETW000 [dev trc ,00000] Connected to DB server version '09.05.0004' 513 1.085791
4 ETW000 [dev trc ,00000] Connected to 'SA4' as 'SAPSA4' schema 'SAPSA4' o.k. 20120 1.105911
4 ETW000 [dev trc ,00000] Connected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.105955
4 ETW000 [dev trc ,00000] Database code page is ok. 37 1.105992
4 ETW000 [dev trc ,00000] Wed Oct 07 06:34:14 2009 52298 1.158290
4 ETW000 [dev trc ,00000] Database collating sequence is ok. 34 1.158324
4 ETW000 [dev trc ,00000] DB2_WORKLOAD=SAP is set in DB2 registry as required. 18173 1.176497
4 ETW000 [dev trc ,00000] CLI Insert Buffering is disabled on single partition databases. 10689 1.187186
*4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 235 1.187421
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 24 1.187445
4 ETW000 [dev trc ,00000] DbSlControl: returning SAPDBHOST='mascon-sap2' 5737 1.193182
4 ETW000 Connected to database.*
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections: 9176 1.202358
4 ETW000 [dev trc ,00000] Disconnected from 'SA4' 2033 1.204391
4 ETW000 [dev trc ,00000] Disconnected: con_hdl=0 ; appl_hdl=381; appl_id="10.0.0.146.19717.091007113413"
4 ETW000 44 1.204435
4 ETW000 [dev trc ,00000] Disconnected from connection 0 75 1.204510
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=0, com_tx=0) 116 1.204626
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 23 1.204649
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 07.10.2009 - 06:34:14
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Oct 07 06:03:29 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'E:\usr\sap\SA4\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.201)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SA4
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 201
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 304
M
M kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 304) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
MX <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host mascon-sap2
M calling db_connect ...
*C Registering callback for dynamic profile parameters
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] CON = 0 (BEGIN)
C &+ DbSlConnectDB6: unable to open file: '
mascon-sap2\sapmnt\SA4\SYS\global\dscdb6.conf'
C
C &+
C &+
C *** ERROR in DbSlConnectDB6[dbsldb6.c, 1233] (END)
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1451]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10561]*
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server mascon-sap2_SA4_00 on host mascon-sap2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Oct 07 06:03:29 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10781
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 304) [dpnttool.c 333]
Thankyou
Chidam.

Mac Mini unable to reach NAS while MacBook Air can

Hi Everyone,
I've got an issue with my LAN. One computer on the LAN, a Mac Mini, is unable to reach the NAS even though all other devices can.
The setup is nothing exotic. It's a home wifi router from my local telco provider. On the Cabled interface I have a NAS, on the Wifi side I have several devices amongst which a Mac Mini and a Macbook Air. All IP addresses are handed out through DHCP. The DHCP server is set to assign a fixed address to both the NAS and the Mac Mini.
The Macbook and the Mac Mini can see each other just fine, the Macbook can access the NAS but the Mini can not. The Mini has no other issues to speak of, it can access everything else just fine.
The issue appears intermittent but I have not found a pattern. Rebooting the NAS, Mini or router individually had no effect. Below is a log of commands and output from the mac mini.
What should I be looking for to troubleshoot this appropriately?
[admin@htpc] ~ $ system_profiler SPSoftwareDataType
Software:
 System Software Overview:
 System Version: OS X 10.8.4 (12E55)
 Kernel Version: Darwin 12.4.0
 Boot Volume: Macintosh HD
 Boot Mode: Normal
 Computer Name: HTPC
 User Name: admin (admin)
 Secure Virtual Memory: Enabled
 Time since boot: 25 minutes
[admin@htpc] ~ $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
 options=3<RXCSUM,TXCSUM>
 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
 inet 127.0.0.1 netmask 0xff000000
 inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
 ether 10:9a:dd:6d:8b:b7
 media: autoselect (none)
 status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 ether 10:9a:dd:ba:d4:96
 inet6 fe80::129a:ddff:feba:d496%en1 prefixlen 64 scopeid 0x5
 inet 192.168.1.19 netmask 0xffffff00 broadcast 192.168.1.255
 media: autoselect
 status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
 lladdr 70:cd:60:ff:fe:5a:f2:30
 media: autoselect <full-duplex>
 status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
 ether 02:9a:dd:ba:d4:96
 media: autoselect
 status: inactive
[admin@htpc] ~ $ arp -a
livebox.home (192.168.1.1) at 3c:81:d8:d7:bc:a4 on en1 ifscope [ethernet]
lightmac.home (192.168.1.15) at 10:93:e9:7:a8:66 on en1 ifscope [ethernet]
droboshare.home (192.168.1.20) at 0:1a:62:0:7:ce on en1 ifscope [ethernet]
? (192.168.1.255) at ff:ff:ff:ff:ff:ff on en1 ifscope [ethernet]
[admin@htpc] ~ $ ping droboshare.home
PING droboshare.home (192.168.1.20): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
Request timeout for icmp_seq 7
Request timeout for icmp_seq 8
Request timeout for icmp_seq 9
^C
--- droboshare.home ping statistics ---
11 packets transmitted, 0 packets received, 100.0% packet loss

Hi Linc,
The NAS responds to pings from other devices on the network.
The Mac Mini has no other issues with regards to accessing the network or the Internet.
I'll restart the router once more to see if this has an effect, but so far no positive change.

Enabling SNC on SAP Server

I am trying to enable SNC on SAP Server. I have downloaded the SAP Cryptographic library and installed it as per in the instructions in http://help.sap.com/saphelp_erp2004/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
Using STRUST transaction I created a PSE for SNC.
I have modified with the instance profile (using RZ10 transation) and specified the following values
snc/enable - 1
snc/accept_insecure_rfc -1
snc/accept_insecure_gui - 0
snc/accept_insecure_cpic -1
snc/permit_insecure_start -1
snc/data_protection/min - 2
snc/extid_login_diag -1
snc/extid_login_rfc - 1
and restarted the SAP Server.
I got the following error
trc file: "dev_w7", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Nov 16 18:44:31 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 5840) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F90040, size: 3192688)
M DpShMCreate: allocated sys_adm at 05F90040
M DpShMCreate: allocated wp_adm at 05F91B58
M DpShMCreate: allocated tm_adm_list at 05F94478
M DpShMCreate: allocated tm_adm at 05F944A0
M DpShMCreate: allocated wp_ca_adm at 0623B0E8
M DpShMCreate: allocated appc_ca_adm at 06240EA8
M DpShMCreate: allocated comm_adm_list at 06242DE8
M DpShMCreate: allocated comm_adm at 06242E00
M DpShMCreate: allocated vmc_adm_list at 06289AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06289AF8
M DpShMCreate: allocated wall_adm at 06289B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Nov 16 18:44:32 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 43
C patchcomment View with literal containing (0x60) (786638)
C np:(local) connection used on SAP50UNI
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:33 2007
C Provider Release:08.10.1830
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:44 2007
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes
C Using shared procedure name cache SAP50UNI_EUCEUC_EUC_MEM initialized by another process.
C Connected to db server : [SAP50UNI] server_used : [np:(local)], dbname: EUC, dbuser: euc
C pn_id:SAP50UNI_EUCEUC_EUC
C Not using MARS (on sql 8.0)
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071116 184432 SAP50UNI
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Fri Nov 16 18:44:52 2007
I MtxInit: 7 0 0
M SHM_PRES_BUF (addr: 0A650040, size: 4400000)
M SHM_ROLL_AREA (addr: 5F030040, size: 159744000)
M SHM_PAGING_AREA (addr: 0AA90040, size: 72089600)
M SHM_ROLL_ADM (addr: 0EF60040, size: 1595440)
M SHM_PAGING_ADM (addr: 0F0F0040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F180040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 08060040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 140600C8, size: 30000000, end: 15CFC448)
B dbtbxbuf: Buffer TABLP (addr: 15D000C8, size: 10240000, end: 166C40C8)
B dbexpbuf: Buffer EIBUF (addr: 166D00D0, size: 4194304, end: 16AD00D0)
B dbexpbuf: Buffer ESM (addr: 16AE00D0, size: 4194304, end: 16EE00D0)
B dbexpbuf: Buffer CUA (addr: 0FC300D0, size: 3072000, end: 0FF1E0D0)
B dbexpbuf: Buffer OTR (addr: 16EF00D0, size: 4194304, end: 172F00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss32.dll".
N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
M *** ERROR => DlLoadLib: LoadLibrary(sncgss32.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 7
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 7 5840) [dpnttool.c 357]
I am unable to connect to SAP Server using SAP GUI.
Any help on this is appreciated.
Thanks

you have two problems (read the log):
> C Failed to initialize provider SQLNCLI. See note
> #734034 for more information.
> C Using provider SQLOLEDB instead.
> C OpenOledbConnection: Failed to set MARS property.
Check the mentioned note.
> SncInit(): Trying builtin default as a
> gssapi library name: "sncgss32.dll".
> ncInit(): snc/gssapi_lib UNDEFINED in profile!
> N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
> M *** ERROR => DlLoadLib:
> LoadLibrary(sncgss32.dll) Error 126 [dlnt.c
> 237]
> Error 126 = "The specified module could not be
> found."
> *** ERROR => SncPDLInit():
> DlLoadLib("sncgss32.dll")=DLENOACCESS
> [sncxxdl.0340]*** ERROR =>
> SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll
> not loaded
> N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
> N sec_avail = "false"
> M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001)
> [thxxsnc.c 223]
> M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT)
> [thxxsnc.c 225]
> M in_ThErrHandle: 1
> M *** ERROR => SncInitU (step 1, th_errno 44, action
> 3, level 1) [thxxhead.c 9413]
the log clearly sais, what to do... what is unclear?
Markus

Messaging Server 4: WebMail login returns "unable to locate the server"

When I log into WebMail, the following error occurs: 

Netscape is unable to locate the server hostname.
Please check the server name and try again.

End User

First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.

However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem: 

<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.

<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.

<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>

If the above actions do not work, then you will need to contact the
system administrator or the help desk.

Mail Server Administrators

As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems: 

<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>

In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.

In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.

The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.

For more information on messagehostname
, please see "What is messagehostname?"
at 
article 4250

You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL: 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887

Note: You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.

When I log into WebMail, the following error occurs: 

Netscape is unable to locate the server hostname.
Please check the server name and try again.

End User

First verify that you cannot reach the hostname
server by using the ping
utility (Windows NT or Unix). If
you cannot reach the host, report this problem to the appropriate system
administrator or help desk.

However, if you can reach the host with ping
, then the problem may be a minor
networking issue that you can resolve. There is also the possibility that
the network has been configured to allow users to ping
unreachable systems. You can use the
following actions to rule out possible sources of the problem: 

<OL>
<LI>Attempt to log in to WebMail again. If you can log in successfully, then
the problem with the WebMail server may have been temporary or is an
intermittent problem.

<LI>End the current browser session and then restart the browser and try to
connect to the WebMail server again. If you can log in successfully, then,
most likely, the browser had cached some old network information that was
reset when you exited the browser.

<LI>Verify the DNS configuration of your system and then restart the entire
system.
</OL>

If the above actions do not work, then you will need to contact the
system administrator or the help desk.

Mail Server Administrators

As the problem with connecting to the WebMail server is caused by configuration
or availability problems, make sure that users who report this problem have
HTTP network connectivity to the hostname. The following scenarios are
possible causes of connectivity problems: 

<UL>
<LI>Users have the wrong proxy.
<LI>Users are being blocked by firewalls.
<LI>Users are connecting from the wrong network.
<LI>Users specify the incorrect DNS servers.
</UL>

In addition, users may also report that the server is down. As the login page
for WebMail does not contain URL links that are FQDNs or absolute path names,
it is possible that users may still be able to see the login window if it was
cached or loaded before the server stopped working.

In some cases, it may be necessary to access the hostname that is used in the
WebMail links. This hostname setting is stored in the configdb
parameter
service.smtp.messagehostname.
This configuration setting is not mentioned in the Messaging Server
documentation.

The messagehostname is a
configuration value that affects many server functions. For this reason, do
not make changes to this value without first considering the effects of such a
change on other WebMail settings, such as the postmaster group and user
mailhost values. Also, please note that changing messagehostname
is not supported from Console.

For more information on messagehostname
, please see "What is messagehostname?"
at 
article 4250

You can also find documentation for configutil
in the Messaging Server Administrator's
Guide at the following URL: 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887

Note: You must stop and restart the HTTP service in order for changes to
the messagehostname to
take effect.

Copying file between non SAP and SAP server in background

Hi,
I have written a program to copy files from a non SAP server to our SAP server which works when running in the foreground.
When I try to run this program in the background, I get the following error ...
Control Framework: Fatal error - GUI cannot be reached
Can anyone tell me how to do this in the background.
Thanks.

Hello,
seems that you use some customer controls in your program. These controls are bound to a dynpro - and that doesn't work in background.
You could try to avoid this and just do the copy without using controls.
Regards Wolfgang

Unable to reach SAP server

Similar Messages

Maybe you are looking for