Unable to reach the OS on my machine

Ok first off I am not sure if this is the right section to ask this question but oh well. Basically I have an issue that just occurred the other day and I am not sure what is wrong exactly. I have had my mid 2010 macbook pro hard drive partitioned with mac OS mountain lion (latest version) and windows 7 professional 64-bit. Everything has been working well for about 3 months now or so since I partitioned it. But now I have an issue where on start up i used to be able to hit the option key on the keyboard to switch between patricians but now this isn't the case when I hit the option key on start up nothing happens. My computer auto defaults to the windows side but then gives me the error "windows did not shut off properly screen" and when I select start windows normally, it doesn't go any further then that screen and I cannot get into windows side either. I have tried this numerous times and I cannot get into my machine. I was just curious if anyone has experienced this and if any suggestions are available to fix this. Or is it safe to say that this HD is done for?

can you select safe mode rather than start windows normally? " and when I select start windows normally"

Similar Messages

Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.

Hi
I am trying to set up an Azure RemoteApp Hybrid solution.
I have created RemoteApp net and uploaded a custom image and all that is fine.
When I link my template to my Collection it fails after provisioning for about an hour.
I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
The join domin works fine and I have tryed with account with different lvl of access to my AD.
Any suggestion how to solve this?

Hello Eric,
I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point.
1. Check the VPN state to ensure it is active or connected state:
Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
2. Verify your VNET configurations have proper IP address ranges
Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
3. Verify your DNS IP configurations are valid, (often this is the problem)
Sundesh: Yes its done and verified
4. Verify the credentials entered for domain join are valid.
Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
Thanks
SUndesh

My adobe cc keeps telling me that its unable to reach the server

my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs

Mybe,because you did not installed well,or because the server does not work propperly at that time!

I am unable to reach the my content page of mysites from the name link within my site collection

For some reason I am no longer able to get to the personal mysites page from within our site collection. My name appears at the top right and it has an option for setting which leads to some minimal page but I can no longer use this to get to the actual
mysites page. Is there a setting I am missing that allows this to happen?

Hi,
According to your post, my understanding is that you failed to reach the content page of mysites from the name link within site collection.
As this issue is always related to the inadequacy configuration about the MySite, you need to make sure that you had configured correctly with your MySite. You can refer to:
http://technet.microsoft.com/en-us/library/ee624362(v=office.14)
What’s more, you can also check with the following steps.
Make sure the Web site for MySites in IIS is started.
Make sure the App pool is running
Use ULSVIEWER to check your Sharepoint ULS logs for the issue.
There are two similar articles for your reference.
http://blogs.msdn.com/b/jorman/archive/2009/01/19/sharepoint-my-site-link-stops-redirecting-users-to-their-personal-site.aspx
http://sharepoint.stackexchange.com/questions/59434/sharepoint-my-profile-404-not-found
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Unable to call the EJB in remote machine --Please HELP

Hi Gurus,
I have deployed my EJB ear (EJB 3.0 we use) in a cluster with two managed servers where as the WEB is in a stand alone server.
When I try to hot the web, it is not able to access the remote EJB and throws error.
Whereas, when I add the weblogic appc generated stubs of that EJB jar to the web ear and deploye the web ear, then it responds fine..
Do someone have any reason behind this? Or any better solution to this.
I badly need a solution ,...
Pleaseeee

Amy,
Thanks.
Here it is ...
"Caused by: java.lang.reflect.UndeclaredThrowableException"
application log:
2009-10-26 18:27:40,850 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:27:40,851 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Exit method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:27:40,851 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.login_onClick login_onClick com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:27:40,852 [ffec04aa-3555-4d80-bb64-f69d91171d9a] ERROR MORE_SECURITY - Error while doing the login login_onClick com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
com.db.more.framework.exception.MoreException: java.lang.reflect.UndeclaredThrowableException
     at com.db.more.framework.pc.BusinessDelegate.securityLogin(BusinessDelegate.java:238)
     at com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC.login_onClick(LoginVEC.java:234)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.cc.framework.adapter.struts.ActionUtil.handleFormAction(ActionUtil.java:612)
     at com.cc.framework.adapter.struts.FWAction.handleFormAction(FWAction.java:207)
     at com.cc.framework.adapter.struts.ActionUtil.execute(ActionUtil.java:745)
     at com.cc.framework.adapter.struts.FWAction.execute(FWAction.java:278)
     at com.cc.framework.adapter.struts.FWAction.execute(FWAction.java:313)
     at com.db.more.framework.pc.AbstractVEC.execute(AbstractVEC.java:328)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.UndeclaredThrowableException
     at $Proxy119.checkUser(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.db.more.framework.pc.BusinessDelegate.securityLogin(BusinessDelegate.java:229)
     ... 34 more
Caused by: java.lang.NoSuchMethodException: com.db.more.framework.security.moreSecurityBean_vfrysx_SecurityDASRemoteImpl_1030_WLStub.checkUser(java.lang.String, java.lang.String, com.db.more.framework.business.MOREAppContext)
     at java.lang.Class.getMethod(Class.java:1605)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.getTargetMethod(RemoteBusinessIntfProxy.java:162)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:53)
     ... 40 more
2009-10-26 18:29:49,854 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:49,854 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Exit method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:49,854 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.doExecute doExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:49,854 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Exit method LoginVEC.doExecute doExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:57,910 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:57,910 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Exit method LoginVEC.doPreExecute doPreExecute com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:57,910 [ffec04aa-3555-4d80-bb64-f69d91171d9a] INFO MORE_SECURITY - Enter method LoginVEC.login_onClick login_onClick com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
2009-10-26 18:29:57,911 [ffec04aa-3555-4d80-bb64-f69d91171d9a] ERROR MORE_SECURITY - Error while doing the login login_onClick com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC
com.db.more.framework.exception.MoreException: java.lang.reflect.UndeclaredThrowableException
     at com.db.more.framework.pc.BusinessDelegate.securityLogin(BusinessDelegate.java:238)
     at com.db.more.loan.loanmgmt.uc010loginhandling.pc.action.LoginVEC.login_onClick(LoginVEC.java:234)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.cc.framework.adapter.struts.ActionUtil.handleFormAction(ActionUtil.java:612)
     at com.cc.framework.adapter.struts.FWAction.handleFormAction(FWAction.java:207)
     at com.cc.framework.adapter.struts.ActionUtil.execute(ActionUtil.java:745)
     at com.cc.framework.adapter.struts.FWAction.execute(FWAction.java:278)
     at com.cc.framework.adapter.struts.FWAction.execute(FWAction.java:313)
     at com.db.more.framework.pc.AbstractVEC.execute(AbstractVEC.java:328)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.UndeclaredThrowableException
     at $Proxy119.checkUser(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.db.more.framework.pc.BusinessDelegate.securityLogin(BusinessDelegate.java:229)
     ... 34 more
Caused by: java.lang.NoSuchMethodException: com.db.more.framework.security.moreSecurityBean_vfrysx_SecurityDASRemoteImpl_1030_WLStub.checkUser(java.lang.String, java.lang.String, com.db.more.framework.business.MOREAppContext)
     at java.lang.Class.getMethod(Class.java:1605)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.getTargetMethod(RemoteBusinessIntfProxy.java:162)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:53)

Error: Could not join the domain. Unable to reach the domain.

Hi, I'm trying to setup a demo environment. I guess VPN is working fine because i can see traffic. And also DNS. I even tried using a domain administrator account, so there is no problem with the account.
When i first created a app collection the wizard complained about using domain.local so i tried domain.com and it worked. Later i want to change back to domain.local because domain.com is only a domain suffix and not my real domainname.
Any tips and tricks I can check to get this working?

Well... This was embarrassing. A typo in the network config. Problem solved.

Unable to reach the bios

I've installed 8.1 on my 2 y\o PC.
Motherboard asks to press DEL, but I get a message like this: press any key to log via the DVD
Now, I know that windows 8 starts SO fast but whatever I do, at most it gets me to where I can handle most of things, but still, it's not the bios.
Is there a chance that windows 8.1 prevents me from get into the bios?
if NO, what steps should I take?
Thanks in advance.
details:
del = bios setup\q-flash
Motherboard = gigabyt H61M-S2-B3
bios= award modular BIOS v6.00PG

This step no need any 3rd party Software
1. try to access by pressing F2 before windows boot screen
2. using this command:
shutdown /s /t 0
choose adjust UEFI setting, PC will be restart and go to BIOS
3. or just go to PC setting - general - advance setting - UEFI Firmware Settings
PC will be restart and go to BIOS
screenshoot

Unable to capture the D4OSESSION during LOAD testing??

Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
Nats

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Mac Mini unable to reach NAS while MacBook Air can

Hi Everyone,
I've got an issue with my LAN. One computer on the LAN, a Mac Mini, is unable to reach the NAS even though all other devices can.
The setup is nothing exotic. It's a home wifi router from my local telco provider. On the Cabled interface I have a NAS, on the Wifi side I have several devices amongst which a Mac Mini and a Macbook Air. All IP addresses are handed out through DHCP. The DHCP server is set to assign a fixed address to both the NAS and the Mac Mini.
The Macbook and the Mac Mini can see each other just fine, the Macbook can access the NAS but the Mini can not. The Mini has no other issues to speak of, it can access everything else just fine.
The issue appears intermittent but I have not found a pattern. Rebooting the NAS, Mini or router individually had no effect. Below is a log of commands and output from the mac mini.
What should I be looking for to troubleshoot this appropriately?
[admin@htpc] ~ $ system_profiler SPSoftwareDataType
Software:
    System Software Overview:
      System Version: OS X 10.8.4 (12E55)
      Kernel Version: Darwin 12.4.0
      Boot Volume: Macintosh HD
      Boot Mode: Normal
      Computer Name: HTPC
      User Name: admin (admin)
      Secure Virtual Memory: Enabled
      Time since boot: 25 minutes
[admin@htpc] ~ $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
        ether 10:9a:dd:6d:8b:b7
        media: autoselect (none)
        status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 10:9a:dd:ba:d4:96
        inet6 fe80::129a:ddff:feba:d496%en1 prefixlen 64 scopeid 0x5
        inet 192.168.1.19 netmask 0xffffff00 broadcast 192.168.1.255
        media: autoselect
        status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
        lladdr 70:cd:60:ff:fe:5a:f2:30
        media: autoselect <full-duplex>
        status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
        ether 02:9a:dd:ba:d4:96
        media: autoselect
        status: inactive
[admin@htpc] ~ $ arp -a
livebox.home (192.168.1.1) at 3c:81:d8:d7:bc:a4 on en1 ifscope [ethernet]
lightmac.home (192.168.1.15) at 10:93:e9:7:a8:66 on en1 ifscope [ethernet]
droboshare.home (192.168.1.20) at 0:1a:62:0:7:ce on en1 ifscope [ethernet]
? (192.168.1.255) at ff:ff:ff:ff:ff:ff on en1 ifscope [ethernet]
[admin@htpc] ~ $ ping droboshare.home
PING droboshare.home (192.168.1.20): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
Request timeout for icmp_seq 7
Request timeout for icmp_seq 8
Request timeout for icmp_seq 9
^C
--- droboshare.home ping statistics ---
11 packets transmitted, 0 packets received, 100.0% packet loss

Hi Linc,
The NAS responds to pings from other devices on the network.
The Mac Mini has no other issues with regards to accessing the network or the Internet.
I'll restart the router once more to see if this has an effect, but so far no positive change.

Z77A-GD65 Unable to reach BIOS setup

Motherboard: Z77A-GD65
CPU: i5-3570K
GPU: EVGA GeForce GTX 660Ti
Memory: G.SKILL 8GB, 2x8GB, 1600MHz
SSD: Intel 330 Series 2.5-Inch
Bios A: A.A
Bios B: A.A
I am dual-booting Windows 7 and Mac. At some point along the way of getting this set up, I have seemingly broken access to my MSI BIOS.
My computer is able to boot into Windows 7 and Mac no problem, and is completely functional in both partitions. But I am completely unable to access my BIOS setup screens (using the DEL key during startup).
When attempting to access the BIOS during startup, I hit the DEL key and it flashes briefly on the BIOS screen (blue MSI logo, but most of the controls are not rendered, the UI looks corrupted) before restarting immediately.
I have tried many times to flash the BIOS to various versions, including the prior 3 versions before A.A and have been unable to reach the BIOS screen.
My most recent BIOS flash was using the Forum HQ tool, and I installed the Intel Management Extensions afterward.
While my computer is functional, I am worried that eventually I will need access to the BIOS to change or update settings and don't like not having this capability. Does anyone have any idea how to get back to a working BIOS? Has anyone seen the problem where the BIOS screen partially renders but then goes immediately into a reboot?
Any help would be appreciated -- apologies if I have omitted any important details. Let me know if more background would help.
Thanks,
Josh

Hi Svet, thanks for the advice. I tried to use the GO2BIOS button which essentially caused the same outcome as when I jam on the delete key during restart.
Basically, it initiates a reboot, the black startup screen begins...
1) I see 9C in the lower right corner
2) then B4 for several seconds
3) then very briefly A2.
4) Then the blue BIOS screen flickers in the upper-left corner (btw, this is only a partially rendered screen, it's only the title bar plus the boot dropdown which is unclickable), then the computer restarts and goes back to step 1.
I also have tried using the ClickBIOS and that just fails to start with an error like "SCEWIN_64.exe has stopped working".
I think my issue is deeper, any further ideas?
Thanks,
Josh

Runcluvfy.sh stage -pre crsinst: error Unable to reach any of the nodes

Hii all,
Well, I've gone through the pre-reqs for trying to install 11G clusterware on RHEL 5.3.
I'm to the point where i'm trying to run:
./runcluvfy.sh stage -pre crsinst -n node1 -verbose
I get this:
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check failed from node "node1 ".
Check failed on nodes:
node1
ERROR:
Unable to reach any of the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I'm just wanting right now, to install a one node RAC system (I will add servers later as I get them online).
I've verified that ssh is working (thinking it may be trying to connect to itself by ssh). I have the keys generated and installed...if I connect ssh as the oracle user back to the same machine, it gets me right on with no prompts for passwords.
nslookup on node1 looks great.
This box has 2 cards....eth0 and eth1. Right now in the /etc/hosts file, I have node1 to the IP for eth0, and node1-priv set for the IP address eth1.
I do have a little trouble understanding what the node1-vip is supposed to do or be set. I found the an IP address one higher than for eth0 wasn't being used, and set node1-vip to be that.
(Can someone explain to me a little more about the vip host?? Is it supposed to somehow point to node1's IP address on eth0 like the regular one does?)
Since this is a one box, one node install...hoping clusterware and checks are just looking at the /etc/hosts file. I've tried playing around, and setting node1-vip to be the same as node1 (IP)...that doesn't work either.
One thing I can guess 'might' be wrong. Does runcluvfy use "ping"? I found the oracle user cannot ping this box from this box. The box (node1) can be pinged from outside the box...it is registered on DNS, I can ssh into it no problem, and again, oracle can ssh into himself on same box with keys properly generated).
I've been looking around, and I just don't see much of what to look at to troubleshoot with this error, I guess everyone gets past the verification the first time with no host unreachable errors?
I'm a bit weak when it comes to networking. Any help greatly appreciated...suggestions, links...etc!!
cayenne

Ok...looks like this was the problem. It appears the SA's, per newer policy, had turned off "ping" for any other user on the box besides root.
I took a shot in the dark, and had them turn it on (as that ssh'ing and other items to check seemed to work outside the runcluvfy script). They turned on ping. The nodes from the script are now reachable and test positive for equivalency.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node1 passed
Result: User equivalence check passed for user "oracle".
Pre-check for cluster services setup was unsuccessful on all the nodes.
I"m guessing that last line...was due to not having the clusterware running on any other boxes?
Anyway, will try to config. RAC, and get things installed.

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

Unable to reach the OS on my machine

Similar Messages

Maybe you are looking for