Unable to read CD's (same stock superdrive)

Hi for some reason my superdrive only reads DVD's and nothing else. When I check under disc burn under about this mac it always says that there is no media in, even though there is a CD in the drive. Plus whenever I insert a CD it doesn't even try to read it. No noise or anything from the drive. When I looked under the specs of what the drive is able to do it states that DVD: Read and write but for CD's it only says write, does that make any sense?

thanks, but that didn't help. Im pretty sure its half dead, guess I'll go to the Genius Bar for them to just tell me that and be like go home or buy something of the net

Similar Messages

Any email forwarded to me that I try to forward from my iPad or iPhone the people are unable to read if the same one I forward from my hp compatable they can read?

I am able to forward emails forwarded to me on my hp but if I forward them from my iPhone or iPad the people I send them to are unable to read them

Certainly there has not been any noticeable increase on the forums of people reporting problems with Verizon.net email. I think the Verizon tech may have been passing the buck.
Delete the account and start over. Here are the instructions:
https://www22.verizon.com/ForYourHome/VZRepair/vziha/Service.aspx?ihaweb=EmailSe tup

Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Pl;ease help I am on a deadline. Bob

Bridge unable to read cache
Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Restarted computer several times as well. Please help I am on a deadline. Bob

THANKS FOR REPLY,
No, I am on a Mac OS X 20.9.4
BOB

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

Unable to read Virtual PC 5 or 6 installation CDs

My machine in unable to read Virtual PC installation CD's in Tiger (10.4.6).
I have a Power Mac G4(1Ghz) with stock Super drive.
In the same machine I was able to read the same CDs in Jaguar before. Now after a while the machine ejects the CD.
Did any body have such problems with Virtual PC CDs in Tiger
Any suggestions..?
Powermac Mac OS X (10.4.5)

Hi, getamac.
The IOATAController device blocking bus message often indicates a failing device.
For example, if this message is found when investigating startup problems or kernel panics, it often indicates a failing hard drive. In such cases, checking the hard drives SMART diagnostics — as described in Step 1 of the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ — can determine if the hard drive is failing.
In your case, unless you're having other problems with your Mac, and assuming:• You are inserting the CDs properly, i.e. they're seated correctly before closing the drive.
• The CDs are in good shape: no dirt, scratches, cracks, or other visible defects.
• The problem arises on most or all CDs.Then I suspect your optical drive may be failing. If the computer is still covered by an AppleCare Protection Plan, contact Apple about having the optical drive replaced. Otherwise, you should probably look for a replacement. Check the Drive Compatibility Database at AccelerateYourMac.com. IMHO, this is the best site for totally unbiased reviews of this kind of hardware from people with first-hand experience.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Optiarc DVD and external DVD unable to read discs?

I am trying to burn an Ubuntu DVD. Unfotunately, either if I introduce a DVD in the in-built Optiarc unit of my iMac or in an external DVD recorder, the iMac seems unable to execute the task correctly.
If I try to use the Disk Utility, the "Burn" button is not present.
If I use a different software, uch as Burn.app, the disk is toaast, but the iMac says it is unable to read the disk content.
Btw, I have downloaded the correct iso file of Ubuntu.
Any possible help?
Thanks

17 months later... Any solution ?
I have got the same issue : I can read all CD-ROMs but not DVD (any DVD)
Same result using internal Superdrive and external DVD reader (both USB and FireWire).
iMac 27' / 3.33GHz Intel Core 2 Duo
OPTIARC DVD RW AD-5680H (3AHB) - ATAPI
Mac OSX 10.8.4 (12E55)
OSX Mountain Lion reinstalled and all updata applied
Test with different accounts, including a root account
Thanks

Unable to read the dictionary of the application or extension...

I had previously installed the HP Color LaserJet 3600 driver from the install CD under Tiger. I recently did an archive and install of Leopard, then ran all the system updates. (Currently at 10.5.5)
When I insert the 3600 CD, though, I get a bunch of jibberish (parts of images, etc.) and a MAC OS X directory. The installer inside that directory attempts to be opened with Script Editor, though, and gives an error: "Unable to read the dictionary of the application or extension because it is not scriptable." followed by "The document 'HP Color LaserJet v5.6.1.069' could not be opened."
Previously this would launch the HP installation program that would install the driver. Now, it's like it's not a recognized program or something. I downloaded the driver from the HP website to try it that way (clj3600MacOSX.dmg) with the same result. The .dmg file opens a disk image with the "HP Color LaserJet v.5.6.1.069" file in it...same result. Cannot open.
I know this program ran fine under Tiger...and a co-worker got it to run after doing an upgrade to Leopard (instead of archive and install.)
When I downloaded the HP 4300 installer dmg, it launches a .mpkg file and Get Info says it's set to open with "Installer (default)". The 3600 file, though is set to open with "Script Editor (default)". I've looked to set it to Installer, but don't know where it is...it's not in Applications or Utilities folder.
I then right clicked on the installer file and selected "Show Package Contents". In the window that was displayed, there was a Contents folder. Inside that folder was a file called "HP Color LaserJet v5.6" with no file extension (Get Info doesn't show an extension either,) but it has a VISE logo. Opening that file launches the VISE installer and performs the setup.
So, by jumping through hoops and getting lucky, I was able to install the driver.
The bigger issue, though, is why the installation CD and/or .dmg file downloaded from HP's website cannot run the installer as usual...why are they set to open with Script Editor as the default application...and how can I fix it so that other disks won't have the same problem?
[I originally posted this in the Printers forum, but it appears it's not a printing problem...it's an OS problem...]

Installer.app is in /System/Library/CoreServices/

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I open my gmail in firefox, it instantly directs my gmail to the gmail calendars. I am unable to read my gmail on firefox, but I can read it on safari

When I open my gmail in firefox, it instantly directs my gmail to the gmail calendars. I am unable to read my gmail on firefox, but I can read it on safari. Please help.
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Is there a solution for this?
I just opened Firefox for the first time in a couple of weeks and am experiencing the same problem. I see my Gmail inbox briefly before being redirected to the calendar. Clicking the back button produces the same result.
Very frustrating.

RMAN unable to read backupset file during Cloning

Hi,
I'm performing cloning operation on windows to windows. On target I have taken backup through rman using recovery catalog. I've taken fresh backup of database along with archivelogs and delete the obsoleted one using rman recovery catalog repository.
When I connect to Target,Recovery catalog and auxiliary instance after executing some commands RMAN gives error that it is unable to read backupset file. What could be the reason for this. I'm posting the Error Portion of RMAN listing please see it and tell me what could be the reasons as I have taken fresh backups and it seems that it is unable to read that particular backup.
channel ORA_AUX_DISK_1: reading from backup piece C:\ORACLEBASE\PRODUCT\10.2.0\F
LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
6YLD_.BKP
ORA-19870: error reading backup piece C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP
ORA-19505: failed to identify file "C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_
AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2010 13:17:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
Please help me in this matter.
Regards,
Abbasi

If your RMAN backup exist on target server path.
Target Server: C:\Oracle\RMAN_BACKUP\
Put it on the same location in the auxiliary server.
Auxiliary Server: C:\Oracle\RMAN_BACKUP\
During cloning also connect with your recovery catalog as you are using recover catalog for the target server.
Regards
Asif Kabir
Edited by: asifkabirdba on Sep 27, 2010 2:51 PM

IDOC import from CRM 7.0 to SAP PI 7.0 fails: unable to read segments

Hello,
We want to import an Idoc from a CRM 7.0 system to SAP PI 7.0.
The import fails with the message ""unable to read segments".
The issue is related to ALL Idocs, standard and customer defined.
The result of any import is that we can see the object in the import folder, but the structure is missing.
Importing any RFC from the same CRM system is no problem.
Any ideas?
Your help is appreciated.
Regards
Dirk

Hi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

Unable to read the file using UTL_FILE Dir

I need to read/write a file from/to the operating system through PLSQL Package. I used UTL_FILE package to do the same. In the application server the utl_file_dir(/usr/tmp in my system) is created as a softlink to database server.
oI want to run this package through the application server. However I am unable to read and write the file to the operating system.
I just wondering it is not reading/opening the file from the server. Please suggest me how to modify my code.

Hi,
How to check if it is end of file or not? I have the following function which is working fine in my win2003 server std 32bit and Oracle10g Database R2 Standard Edition one 32bit. HOwever, when I deploy to production server which is 64bit OS and database, it gives error at UTL_FILE.GET_LINE(fptr, tmp);
Any idea why it behaves like that?
     FUNCTION readFile (
          inHTML OUT CLOB,
          path IN VARCHAR2,
          htmlFile IN VARCHAR2
     ) RETURN BOOLEAN IS
     fptr utl_file.file_type;
     tmp VARCHAR2(5023);
     bufferlen BINARY_INTEGER;
     BEGIN
          fptr := UTL_FILE.FOPEN(path, htmlFile, 'r');
          DBMS_LOB.CREATETEMPORARY(inHTML, TRUE);
          DBMS_LOB.OPEN(inHTML, DBMS_LOB.LOB_READWRITE);
          LOOP
               UTL_FILE.GET_LINE(fptr, tmp);
               if tmp is not null then
                    tmp := tmp || CHR(10);
                    bufferlen := LENGTH(tmp);
                    DBMS_LOB.WRITEAPPEND(inHTML, bufferlen, tmp);
               end if;
          END LOOP;
          WHEN NO_DATA_FOUND THEN
          DBMS_LOB.CLOSE(inHTML);
               UTL_FILE.FCLOSE(fptr);
               RETURN TRUE;
          WHEN OTHERS THEN
               DBMS_LOB.CLOSE(inHTML);
               DBMS_LOB.FREETEMPORARY(inHTML);
               RETURN FALSE;
     END readFile;

Unable to read attribute of type TABLE

Hello IDM Gurus,
I was having some trouble reading data in the source tab from a temporary table created in a FROM AD Pass; specifically I am unable to read from an attrribute of type TABLE, which is being used for the memberOf attribute when reading members of a group from AD. I don't get any errors in the FROM Pass, nor do I get any errors when trying to read all other data from the temporary table; I'm able to read all data except the memberOf attribute of type TABLE; I've tried different variations of SELECT statements as well as different possible values in the destination tab but it still hasn't resulted in valid memberOf values from the temporary table.
I thought this would be a lot simpler than it's turned out to be; I would appreciate any help I could get on this issue.
Thanks a lot in advance!
Best regards,
Sandeep

Hi Achim,
Thank you for your quick response! I was actually able to spend a bit of time on the table itself and after experimenting a bit I managed to work out a query to correlate the memberOf values with the appropriate keys from the two separate tables in the same pass.
Thanks again for your suggestions!
Best regards,
Sandeep

Cdparanoia 004: Unable to read table of contents header

Hi. I've been trying to rip wavs with grip but it was unable to locate any audio cd even though I could explore it from my desktop (xfce 4.10) and I am part of the optical group. Because of this, I tried running cdparanoia from the terminal.
Running the next command: cdparanoia -vsQ displays the next warning:
cdparanoia III release 10.2 (September 11, 2008)
Using cdda library version: 10.2
Using paranoia library version: 10.2
Checking /dev/cdrom for cdrom...
Testing /dev/cdrom for SCSI/MMC interface
SG_IO device: /dev/sr0
CDROM model sensed sensed: ASUS DVD-E616P3H 1.04
Checking for SCSI emulation...
Drive is ATAPI (using SG_IO host adaptor emulation)
Checking for MMC style command set...
Drive is MMC style
004: Unable to read table of contents header
Unable to open disc. Is there an audio CD in the drive?
if I try to listen a track from an external application like mplayer it won't play any audio but if I manually locate the audio and choose them an application to play, they will. Also, the hardware itself is functional since I ripped music from a debian squeeze (dvd) installation.
Finally If it's useful, I used gvfs and exec ck-launch-session dbus-launch startxfce4 in my .xinitrc to mount usb and other devices automatically
Thanks in advance

You removed all mailboxes (.mbox files) located within this problem account named folder at Home > Library > Mail and the same occurs when re-launching Mail?
The TableofContents file is a package file for a .mbox so it is hidden.
I'm not sure how you removed all mailboxes for this account but quit Mail first and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account). Move the account named folder to the Desktop.
Launch Mail and if it launches successfully without locking up and quitting, a new account named folder will be created automatically by Mail within the account named folder.
All email clients have limits and the recommended size limit for a Jaguar or Panther mailbox is 1GB and for Tiger Mail, 2GB.
An "overstuffed" mailbox issue can occur at any mailbox size (which means the mailbox has some corruption and/or is over the recommended size limit) but is more likely to occur depending on the number and size of message attachments contained in a mailbox and especially as a Jaguar or Panther mailbox approaches or exceeds 1GB in size.
Since an account's Inbox mailbox is usually the most active mailbox, it is not a good idea to use an account's Inbox mailbox as the final storage location for all received messages not deleted.

Elements 7 on windows 7, have downloaded a new version on raw for my new camera eos50d still unable to read the raw files help

Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisa

please have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks

Unable to read CD's (same stock superdrive)

Similar Messages

Maybe you are looking for