Unable to read CD
I'm unable to read a particular CD burnt on a PC. When I insert the CD no icon appears on the desktop, a clicking sound is audible for 30 seconds then the machine ejects it. This has never occurred previously on this machine. The CD reads on a PC. Can anyone help please?
Mac OS X 10.2.8
Hi, Donald. The CD was burned in a format that isn't Mac-compatible, or else it was burned without taking the final step (which seems to be optional in some PC-based burning software) of "closing" or "finishing" the burn session. A disc that hasn't been "closed" is unreadable on a Mac.
In either case, the fault lies with the person who prepared the CD, not with your Mac. Ask them to burn you another disc in ISO9660 format and to be sure to close the session.
Similar Messages
-
System unable to read table in Adhoc Query
Hi Experts,
I am trying to extract a report based on Infotype 0022 through Adhoc query. Even after maintaining data for IT0022 for a few employees the system is unable to read the educational details of those employees.
I am unable to trace the defect . can anybody please tell me what could be the reason. I have checked the table PA0022, there the data is been stored.
Thanks & Regards,
SmithaHi paul and experts
actuall im reading data from 0022 infotype . im using macro
rp_provide_from_last p0022 '11' pn-begda pn-endda.
no data found for this.
but in pa30 for that particular employee data is there.
please help me out of this.
thanks a lot -
Bridge CC. on opening message says unable to read cache, purge cache. This does not help.
On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.
Mac? REad this http://forums.adobe.com/thread/1237168
-
Install Software HANA unable to read repository
Hello,
I'm new to Eclipse. I'm trying to get up the trial Cloud environment for SAP HANA. I have Eclipse Juno installed. When I attempt to do an install of the HANA software on top of Eclipse I receive error "Unable to read Repository".
We do not use a proxy, so network was set to "DIRECT". I can get to the SAP site from the browser tools.hana.ondemand.com/luna. I downloaded the certificate for that site and added it to the cacerts file for JDK1.6.0_45.
The error message in full says:
Unable to read repository at tools.hana.ondemand.com/luna/content.xml.
Using the browser, tools.hana.ondemand.com/luna/content.xml returns a 404 error. If I change it to tools.hana.ondemand.com/luna/content.jar, it gives me a download.
As far as I can tell, there's no way to make Eclipse point to content.jar. Can someone tell me where this is going wrong?
Thanks.
Danny HearnOn 06/26/2015 08:52 AM, Danny Hearn wrote:
> Hello,
>
> I'm new to Eclipse. I'm trying to get up the trial Cloud environment
> for SAP HANA. I have Eclipse Juno installed. When I attempt to do an
> install of the HANA software on top of Eclipse I receive error "Unable
> to read Repository".
> We do not use a proxy, so network was set to "DIRECT". I can get to the
> SAP site from the browser tools.hana.ondemand.com/luna. I downloaded
> the certificate for that site and added it to the cacerts file for
> JDK1.6.0_45.
>
> The error message in full says:
> Unable to read repository at tools.hana.ondemand.com/luna/content.xml.
>
> Using the browser, tools.hana.ondemand.com/luna/content.xml returns a
> 404 error. If I change it to tools.hana.ondemand.com/luna/content.jar,
> it gives me a download.
> As far as I can tell, there's no way to make Eclipse point to
> content.jar. Can someone tell me where this is going wrong?
>
> Thanks.
>
> Danny Hearn
Likely the best support for SAP/HANA would come from SAP/HANA. -
PI 7.3 - AEX "unable to read configuration data" and login problems
Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PMhi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk -
Error: Unable to read footer file
Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing -
I unable to read DVD video discs, although I can read DVD-R and CD.
I try to change the region using regionset but with no change.
here is the output of vlc, when I try to open DVD:
VLC media player 0.8.6b Janus
libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Could not open /dev/hdc with libdvdcss.
libdvdread: Can't open /dev/hdc for reading
libdvdnav: vm: faild to open/read the DVD
[00000291] dvdread demuxer error: DVDRead cannot open source: /dev/hdc
[00000294] vcd access error: could not read TOCHDR
[00000294] vcd access error: no movie tracks found
[00000294] access_file access error: file /dev/hdc is empty, aborting
[00000294] cdda access error: could not read TOCHDR
[00000294] cdda access error: no audio tracks found
[00000289] main input error: no suitable access module for `dvd:///dev/hdc'
[00000278] main playlist: nothing to play
signal 2 received, terminating vlc - do it again in case it gets stuck
[00000278] main playlist: stopping playbackwhats in your
/etc/fstab
yours is probably
/dev/dvd /mnt/dvd auto ro,user,noauto,unhide 0 0
mine is
/dev/dvd /mnt/dvd udf,iso9660 ro,user,noauto,unhide 0 0
i had issues with some dvd's till i changed from auto to udf -
Unable to read the dictionary of the application or extension...
I had previously installed the HP Color LaserJet 3600 driver from the install CD under Tiger. I recently did an archive and install of Leopard, then ran all the system updates. (Currently at 10.5.5)
When I insert the 3600 CD, though, I get a bunch of jibberish (parts of images, etc.) and a MAC OS X directory. The installer inside that directory attempts to be opened with Script Editor, though, and gives an error: "Unable to read the dictionary of the application or extension because it is not scriptable." followed by "The document 'HP Color LaserJet v5.6.1.069' could not be opened."
Previously this would launch the HP installation program that would install the driver. Now, it's like it's not a recognized program or something. I downloaded the driver from the HP website to try it that way (clj3600MacOSX.dmg) with the same result. The .dmg file opens a disk image with the "HP Color LaserJet v.5.6.1.069" file in it...same result. Cannot open.
I know this program ran fine under Tiger...and a co-worker got it to run after doing an upgrade to Leopard (instead of archive and install.)
When I downloaded the HP 4300 installer dmg, it launches a .mpkg file and Get Info says it's set to open with "Installer (default)". The 3600 file, though is set to open with "Script Editor (default)". I've looked to set it to Installer, but don't know where it is...it's not in Applications or Utilities folder.
I then right clicked on the installer file and selected "Show Package Contents". In the window that was displayed, there was a Contents folder. Inside that folder was a file called "HP Color LaserJet v5.6" with no file extension (Get Info doesn't show an extension either,) but it has a VISE logo. Opening that file launches the VISE installer and performs the setup.
So, by jumping through hoops and getting lucky, I was able to install the driver.
The bigger issue, though, is why the installation CD and/or .dmg file downloaded from HP's website cannot run the installer as usual...why are they set to open with Script Editor as the default application...and how can I fix it so that other disks won't have the same problem?
[I originally posted this in the Printers forum, but it appears it's not a printing problem...it's an OS problem...]Installer.app is in /System/Library/CoreServices/
-
Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.comhi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When I open my gmail in firefox, it instantly directs my gmail to the gmail calendars. I am unable to read my gmail on firefox, but I can read it on safari. Please help.
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16Is there a solution for this?
I just opened Firefox for the first time in a couple of weeks and am experiencing the same problem. I see my Gmail inbox briefly before being redirected to the calendar. Clicking the back button produces the same result.
Very frustrating. -
Unable to read file from application server
Hi guys,
I am reading file(could be any extension) from application server,but some time i am successfuly able to read file and sometime unable to read,why its happening .
my code is here
OPEN DATASET E_FILE FOR INPUT IN BINARY MODE . "
IF SY-SUBRC = 0.
DO .
READ DATASET E_FILE INTO GS_PDF_TAB.
IF SY-SUBRC = 0.
APPEND GS_PDF_TAB TO GT_PDF_TAB.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET E_FILE.
ENDIF.
Thanks
Ankur SharmaHi,
What actually happens? Do you get a short dump? Do you get a return code ne 0? Does it run fine but you get no data in your table?
We aren't mind-readers and can't help much without more information.
Try using transaction AL11 to see if you access the files you are trying to open.
Gareth. -
RMAN unable to read backupset file during Cloning
Hi,
I'm performing cloning operation on windows to windows. On target I have taken backup through rman using recovery catalog. I've taken fresh backup of database along with archivelogs and delete the obsoleted one using rman recovery catalog repository.
When I connect to Target,Recovery catalog and auxiliary instance after executing some commands RMAN gives error that it is unable to read backupset file. What could be the reason for this. I'm posting the Error Portion of RMAN listing please see it and tell me what could be the reasons as I have taken fresh backups and it seems that it is unable to read that particular backup.
channel ORA_AUX_DISK_1: reading from backup piece C:\ORACLEBASE\PRODUCT\10.2.0\F
LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
6YLD_.BKP
ORA-19870: error reading backup piece C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP
ORA-19505: failed to identify file "C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_
AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2010 13:17:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
Please help me in this matter.
Regards,
AbbasiIf your RMAN backup exist on target server path.
Target Server: C:\Oracle\RMAN_BACKUP\
Put it on the same location in the auxiliary server.
Auxiliary Server: C:\Oracle\RMAN_BACKUP\
During cloning also connect with your recovery catalog as you are using recover catalog for the target server.
Regards
Asif Kabir
Edited by: asifkabirdba on Sep 27, 2010 2:51 PM -
Unable to read dependencies of an included VI.
Hey all.
I am trying to build an executable for a project that I have been working on.
When I tell it to build I get the following error.
Unable to read dependencies of an included VI. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
C:\Documents and Settings\du402c\Desktop\XPDR\Working Folder\XPDR_GUI_SELECT.vi
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller in Charge.
I can't for the life o fme figure out what is wrong. Everything runs fine when I just run it, but I can't actually build it.
I have gone inot the main GUI and done the CTRL-SHIFT Run Arrow bit, and it hasn't changed anything.
Any suggestions?
Thanks.
Any suggestions?Ok, ignore this.
I created a new project from scratch and it worked fine. -
I have a mac osx 10.411 power pc and recently i downloaded excel for mac 2004 so that i could download some program that only would work if i have excel for mac but what happen was it went to script and said that unable to read the dictionary of the application of the extension because it is not scriptable and the second pop up said the document autorun,inf could not open script editor can not open files in script editor app can any one help me how do i get these program working thank you norro460
good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along
-
When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Frm-40502: oracle error: unable to read list of values
Hi All,
I am personalizing the assignment form, where we need to restrict the JOB LOV based on Organization value.
In Forms Personalization we are creating the record group from query and attaching to Job field.
The query is,
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = :CTL_GLOBALS.BUSINESS_GROUP_ID
AND j.date_from <= :CTL_GLOBALS.SESSION_DATE
AND ( (j.date_to IS NULL)
OR (j.date_to >= :CTL_GLOBALS.SESSION_DATE)
ORDER BY j.NAME
When we use this query, we are getting the error "frm-40502: oracle error: unable to read list of values"
If i replace the bind variable with values we are not getting the error and its working fine.
Replace query:
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = 202
AND j.date_from <= TRUNC(SYSDATE)
AND ( (j.date_to IS NULL)
OR (j.date_to >= TRUNC(SYSDATE))
ORDER BY j.NAME
how to use bind variables (Block.field) here? We are getting this error only when using the bind variable in the query.
Please share your ideas.
Thanks.Hi;
What is your EBS version? There are 96 docs avaliable about similar error message. I suggest use metalink for your issue
You can also check:
FRM-40502: Oracle Error: Unable To Read List Of Values [ID 1161404.1]
Frm-40502: Oracle Error: Unable To Read List Of Values. [ID 351931.1]
FRM 40502: Oracle Error:Unable to Read List of Values [ID 179162.1]
Regard
Helios
Maybe you are looking for
-
Hi All, I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error while opening the previous instances of the crystal report in BOCMC. I am trying to run or schedule the report but it is always going t
-
I finally figured out how to get the virtual hosting piece to work in wls811. Now I have a question about the console presenting me with some web app information. The Web Application Modules node and the Deploy tab shows me the application is deploye
-
Geturl not working of ferris wheel effect
Hi, Thanks to Rob i have managed to get the effect i want and he has kindly given me the code to add a geturl to each of the images on the ferris wheel effect. The only thing is that when i view it it does not work so maybe i am missing somthing, see
-
Can delegate and strategy patterns coexist ?
Say I have an interface for persistence call that PersistenceInterface. Now for MySQL I created MySQLPersistenceClass and for DB2 I created one more class DB2PersistenceClass. Now to proceed with my busines slogic I have a class BusinessLogicHandler
-
Any pre configured apps for EID
Hi Experts, Am new to BI platform but not to Endeca. On my initial comparisons between Endeca information discovery and its counterparts in BI, I found that some BI tools like OBIEE provide BI apps by which you can configure predefined dashboards bas