Unable to read Configuration of AEBS

My AEBS n has worked for about 9 months, with any problems i've had being user error or windows/mac issues. Now i've got one that I am pretty much unable to find any information on. I am able to use the internet, print, and share information from my NAS to my MacBook, MBP, Mini, and WIn7 desktop. I am unable to access the AEBS from Finder, can see but not read the configuration from any machine (MB [snow leopard], MBP [leopard], Mini [leopard] all wireless, Win7 wired), and cannot use USB drives attached to the hub attached to the AEBS. I'm thinking that the AEBS isn't functioning properly, as opposed to some configuration issue, since the issue happened pretty much out of nowhere. My MB time machine uses a drive attached to the network, which it was no longer able to find, which is how i noticed the problem. Any help would be greatly appreciated.

"Using the AirPort Utility, I can view the very basic details of the AEBS (IP, etc), but when I double click for more detailed information, it hangs on "Reading the AirPort Extreme configuration" (I have gotten at least two different error messages, -6753 is the only one I have written down). I get the same result from three different machines."
Temporarily, connect an ethernet cable from your computer to one of the LAN<-> ports on the AEBS. Open AirPort Utility and see if you can read the device configuration that way.
Likewise, you can do this individually for your other devices as well

Similar Messages

PI 7.3 - AEX "unable to read configuration data" and login problems

Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PM

hi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk

Unable to read configuration from NDS

Dear All,
I just finished setting up this Border 3.9 server few months ago, everything works fine; but from time to time I will get the following message during ACLCHECK as follow: For example this is a log from system console after I made some changes on the proxy access rule.
2-19-2008 2:47:13 pm: BRDSRV-3.70-11
Severity = 1
Timestamp synchronization of BRDSRV.NLM is completed.
2-19-2008 2:47:13 pm: BRDSRV-3.70-11
Severity = 1
Timestamp synchronization of ACLCHECK.NLM is completed.
2-19-2008 2:47:47 pm: ACLCHECK-4.80-9
Severity = 1
ACLCHECK.NLM is reading rules from NDS...
2-19-2008 2:47:47 pm: ACLCHECK-4.80-1
Severity = 1
ACLCHECK.NLM read 15 rules from NDS.
2-19-2008 3:00:09 pm: BRDSRV-3.70-3
Severity = 1
Unable to read configuration from NDS (error - -669).
Again, this BDM server running just fine without any issue, all access rules is working, VPN and filtering is working fine as well. Just can't think of why it throwing me this error from time to time. Any suggestion?
Thank you,
James

In article <[email protected]>, Jkent wrote:
> 2-19-2008 3:00:09 pm: BRDSRV-3.70-3
> Severity = 1
> Unable to read configuration from NDS (error - -669).
>
This is an invalid password error, and I'm unsure why you are getting it.
Do you have a replica on the server?
> Again, this BDM server running just fine without any issue, all access
> rules is working, VPN and filtering is working fine as well. Just can't
> think of why it throwing me this error from time to time. Any
> suggestion?
3.9 sp1 is supposed to come out on Feb 29 - keep an eye out for it.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

NVRAM: Unable to read configuration. Try again later.

Hi,
I have built a 3750 switch stack (8 switches) and every now and then (random) when i do a "show run" or "write mem", i get the following error message
NVRAM: Unable to read configuration. Try again
It doesn't happen all the time, its a random thing. I'm currently using c3750-ipservicesk9-mz.122-53.SE2.bin.
I have checked the memory and there's a lot of free memory. I am the only person consoled onto the stack. I did reboot the stack but its an intermittent problem.
Anyone encountered this issue before?

I have noticed the same problem when working on larger 3750 and 3750X stacks on several different code levels. I applied the "DEBUG CONFIGURATION LOCK" command and was able to duplicate the problem. I shut down and unused interface and tried to write the configuration and got the messages below:
May 25 00:09:55: Parser: - Config. Lock requested by process <342> client
May 25 00:09:55: Parser: - Config. Lock acquired successfully !
May 25 00:09:55: Parser: - Config. SHARED UnLock requested
May 25 00:09:55: Parser: - Config UNLOCKED !
May 25 00:10:08: Parser: - Config. Lock requested by process <342> client
May 25 00:10:08: Parser: - Config. Lock acquired successfully !
May 25 00:10:08: Parser: - Config. SHARED UnLock requested
May 25 00:10:08: Parser: - Config UNLOCKED !wr
May 25 00:10:15: Parser: - Config. Lock requested by process <342> client
May 25 00:10:15: Parser: - Config. Lock acquired successfully !
May 25 00:10:15: Parser: - Config. SHARED UnLock requested
May 25 00:10:15: Parser: - Config UNLOCKED !end
Stack-1#wr
May 25 00:10:17: %SYS-5-CONFIG_I: Configured from console by tkazee on vty0 (10.65.128.62)
May 25 00:10:20: Exec command locking feature is not enabled.
NVRAM: Unable to read configuration. Try again later.
Stack-1#
The problem appears to be related to the "SSH Process". You are not alone.

Unable to read configuration data (ExchangeProfile/aii.properties)

Pls anybody can help me in solving this issue
Unable to read configuration data (ExchangeProfile/aii.properties)

look at this two threads
Exchange Profile Error
XI 3.0 Problem on Java startup
Thanks

Unable to Read Configuration (Airport Extreme w. OS 10.2.8/G4)

I purchased an Airport Extreme Base Station. I am unable to configure it through the Airport Setup Assistant v 3.1. I get the following error when I click on the [Configure] icon "The Airport Admin Utility was unable to read the configuration of the selecetd base station". Airport works fine with my G4, but I cannot configure it so it will work with my PC laptop. Futher details:
Mac OS 10.2.8
Airport Setup Assisitant v3.1
Apple Base Station v 5.7
Mac G4 400 MHz w/ MacWireless 11g PCI Card
G4 Mac OS X (10.2.x)

I get an authentication error. My PC can see the Airport, but get past it. Do you have any tips on why I cannot access the configuration function of Airport Admin Utility? I see a lot of postings re this error but no real solutions yet.
Thanks for your reply!

"Unable to read configuration"

I recently moved and am sharing a wireless connection with my neighbor, who uses static IP and 128 bit WEP. I've been able to configure all my computers, including my iMac by wiring it to a bridge.
The only thing is my AEX doesn't work, presumably because he has DHCP turned off and it doesn't have an IP assigned in the correct range. SO, I've been trying to configure it by plugging in the AEX to the bridge via ethernet and resetting.
The base station shows up in both Admin Asst and Admin Utility, with an IP address (wrong range) and everything; and the green light is on. WHen I click on "configure" in Admin Utility, it spins for a while then asks me for a password - I have entered a few different ones (I don't know if I ever gave it one), it spins some more, then says "Aiport Admin Utility was unable to read the configuration of the slected base station. An error occurred while reading the configuration." Admin Asst gives me a similar response.
How do I can get in and what do I do from there, just assign a new IP address and the SSID and voila?
Any help would be vastly appreciated. FYI I am using it to stream Airtunes to my stereo; it worked brilliantly on my old setup before moving.

First thing you need to do - ask your neighbor to provide you with a unique IP address that will work with his router.
Then temporarily cable the Airport Express directly to the ethernet port of one of your Macs. The Airport Admin Utility will now "see" and allow you to configure the Airport Express. Under the Internet tab, select to "Configure Manually", then enter the IP address and subnet mask your neighbor provided. Under the Network tab, uncheck the box to "Distribute IP addresses". Update settings to the Airport Express. You can now cable the Airport Express (and the Mac) back to the wireless bridge - and if you run the Airport Admin Utility again, it should now be able to access the configuration of the Airport Express.

WorkStation 11 shared VM's suddenly get a red X and "unable to read configuration data"

This will usually follow a re-boot of the host machine, running Windows Server 2012.
I can then REMOVE the machine(s)
And open the .vmx file from the file manager ...
After which I can again share the file.
What can I do to prevent this? Has anyone else seen the problem?
Thanks!

I'm seeing this as well. With Win7 as host OS. Not sure what causes it yet...
Highly annoying!
Update: Restarting "VMware Workstation Server" service seems to solve it. Tried setting the service to Automatic Start (Delayed), but that didn't help.
Update2: For now I've implemented a script (based on http://csi-windows.com/toolkit/csi-vmwsautoshutdown) that restarts the service with some delay after system startup (Scheduled Task) and forcefully starts all VM's. This seems to help ensuring the VM's Auto-Start.
VMwareHostdrestart.bat (call this from Scheduled Task)
@echo off
net stop VMwareHostd
net start VMwareHostd
%~dp0vmstartup.bat >%~dp0VMwareHostdrestart-vmstartup.log 2>&1
vmstartup.bat (modify to contain credentials for an user with sufficient rights in VMware Workstation)
@echo off
set PROGROOT=%ProgramFiles%
if not "%ProgramFiles(x86)%" == "" set PROGROOT=%ProgramFiles(x86)%
set HOST=127.0.0.1
set LOCALUSER=%COMPUTERNAME%\<username>
set LOCALPWD=<userpass>
set LOGGING=1
if not exist "%PROGROOT%\VMware\VMware VIX\vmrun.exe" (
echo VMware VIX Not Installed, aborting...
if %LOGGING% EQU 1 (
eventcreate /T ERROR /ID 1 /L APPLICATION /D "VMware VIX not installed, aborting..."
goto :ALLDONE
set VMRUN="%PROGROOT%\VMware\VMware VIX\vmrun.exe"
rem start, stop, reset, suspend, pause, unpause
set VMACTION=start
setlocal EnableDelayedExpansion
echo searching for vms...
set STOPPEDVMCOUNT=0
for /f "tokens=*" %%i in ('%VMRUN% -T ws-shared -h %HOST% -u %LOCALUSER% -p %LOCALPWD% listRegisteredVM ') do (
echo %%i |findstr /I /C:"["
if !ERRORLEVEL! EQU 0 (
echo Processing %VMACTION% for VM: %%i
%VMRUN% -T ws-shared -h %HOST% -u %LOCALUSER% -p %LOCALPWD% %VMACTION% "%%i"
if %ERRORLEVEL% EQU 0 (
if %LOGGING% EQU 1 (
eventcreate /T INFORMATION /ID 1 /L APPLICATION /D "Successful %VMACTION% of VM: %%i"
set /a STOPPEDVMCOUNT=!STOPPEDVMCOUNT!+1
) else (
if %LOGGING% EQU 1 (
eventcreate /T ERROR /ID 2 /L APPLICATION /D "Failed %VMACTION% of VM: %%i"
echo %STOPPEDVMCOUNT% VMs Started
rem if %LOGGING% EQU 1 (
rem eventcreate /T INFORMATION /ID 1000 /L APPLICATION /D "%STOPPEDVMCOUNT% VMs Started"
rem )
endlocal
:ALLDONE
REM pause

Oblix_OBWebGate_AuthnAndAuthz: ..- Unable to read log configuration file.

Hi All,
I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.oracle.com/thread/2549716).
Now I have apply patch BP9 (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate) for Webgate, Now I have a new issue, I am unable to get the logon page of OAM when I try to access my Apache resource.
The Error Message in the browser is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
In the error log file of Apache I have found
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
[Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz: Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
Can Anyone help me regarding this issue...
Thanks
Tamim Khan

Hi Colin,
Thanks for your help, You are right I have change the permission of /opt/netpoint/webgate/access/oblix/lib/libxmlengine.so.
Now I am able to access the logon page of the access manager.
But the problem as I mention in (https://forums.oracle.com/thread/2549716) my ObSSOCookie value is still loggedcontinue.
My Authentication return (ExecutionStatus.SUCCESS) Successful from the Java Code , and I am unable to login in the application. The thing is I can't manipulate ObSSOCookie from Java code.
I have apply Patch 12363955 to resolve this issue. But this patch is now to resolve this issue.
Have you any idea how to resolve this issue.
Thanks
Tamim Khan

Reading of configuration of AEBS not successful...?

I'm quite surprised - first time no "plug&play", most likely a user problem...
Just tried to start configuring my new AEBS, connected BS to DSL modem and power - connected to iMac via WLAN, detected by software, started reading configuration of the base ....
But the reading of the configuration is never ending... what may be wrong? It just continues reading.... never giving any chance to set anything.
It tries to read the current configuration and never succeeds in showing the configuration, not to speak of a chance to set the configuration to my provider values etc.
Who may help?
Thanks a lot!

I have the same problem, but it doesn't work if I try an ethernet cable either. The first time I encountered this problem (only a day or two after purchase) , I did a hard reset, but a day later I am in the same situation. Any suggestions?
MacBook Core2 Duo 2.0 Mac OS X (10.4.8) 1 Gb SDRAM

ASDM is unable to read the configuration from ASA.

Earlier today I was configuring the Cisco ASA (7.2(2)) using the ASDM, but after a reboot of the appliance I now get the following:
ASDM is unable to read the configuration from ASA.
This happens shortly after ?Loading running configuration from the device? appears in the ASDM status window.
I have tried restarting both the appliance and my workstation, but the issue persists. I have also tried clearing the ASDM cache, but that doesn?t help either. The issue occurs whether I used the Cisco ASDM Launcher or the web interface.
SSH access to the appliance works fine.
Thanks for any assistance (why is it that Cisco?s GUIs always have issues?!?).

I have exactly the same issue , SSH works fine but ASDM and Web interface reply with that error message "ASDM is unable to read the configuration from ASA".
My ASA is a 5520 ver 7.1(2) with ASDM 5.1(2)
Could it be something related to Java ?
Thanks for any hint.

Unable to read task sequence configuration disk

Target Server is an HP ProLiant BL460c G5
I'm trying to load my reference iso via the iLO connection, mounting the image to the CD drive. I used the same process to create the WIM file on my Source Server and it worked fine. I boot from the CD, it loads windows files, then comes up to
the SCCM screen with the error "Unable to read task sequence configuration disk."
Any ideas what's going on?

In my case I had the same error using SCCM boot media in a USB 3.0 port. Solution was here to use a USB 2.0 port to solve it.
Maybe this will help you:
http://www.jamesbannanit.com/2012/02/unable-to-read-task-sequence-configuration-disk-in-sccm-osd/
My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn

WebUtil error: WUC-6: Unable to read WebUtil configuration file

Dear Colleague,
I received the following error:
WUC-6: Unable to read WebUtil configuration file
c:\OraHome_BIForms\forms\server\webutil.cfg
In the meantime, I have verified that my default.env file contains the following path definition:
# webutil config file path
WEBUTIL_CONFIG=C:\OraHome_BIForms\forms\server\webutil.cfg
What is wrong here? Does "unable to read..." mean that the file security settings do not allow read access to the webutil.cfg file?
I would appreciate any advice you can give me.
Thank you and kind regards,
Randy

In the meantime, I have figured out the solution to my problem.
The webutil.cfg file was not in the directory that was being pointed to in the path parameter.
Regards,
Randy

Unable to read registry key for log4net configuration location

I am getting this error "Unable to read registry key for log4net configuration location."
Regards Ravin

Thanks for reply.
I m using log4net in Biztalk server 2010. I wrote code in my orchestration like
// Create the logger using the ProjectName property value
from the .btdfproj
logger = log4net.Ext.Serializable.SLogManager.GetLogger("MyProjectName",
log4net.helpers.CallersTypeName.Name);
// Configure the logger by referencing the registry key written
during the deployment process
logger.RegistryConfigurator();
// Set some properties in the PropertiesCollectionEx object
logProps.Set("InstanceId", MyOrchestration(Microsoft.XLANGs.BaseTypes.InstanceId));
// Write a debug level entry to Log4Net including the properties
object
logger.Debug(logProps, "Received top level request...");
After successfully Deploying solution. Im getting this error.
I think problem is with the " log4net 64bit".
Regards Ravin

Error reading configuration file

I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
          at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
          at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
          at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
          at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
          at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
          ... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
          ... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?

I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated

Unable to read Configuration of AEBS

Similar Messages

Maybe you are looking for