Unable to read my messages
10/7/2012
I recently upgraded to ios 6 and now am having a messaging issue. I am not able to read any of my incoming text messages. I try to open the messages screen and all I get is a blank screen. please advise what must i do?
Alec
Thank you for your quick response. Nothing happened when I opened it. Just before I posted my concern I registered for Adobe, and voila, I went to my message and it opened. Just think that it was meant to be.
QuiltingPennyBend
Sent from my iPad
Similar Messages
-
Unable to read SMS messages received on Xperia Arc
Hi,
I am unable to read SMS messages I have received on my Xperia Arc. They arrive ok to my handset (as they appear in the notification bar) but when I go to open it up under Messaging they don't appear. When I send messages they also don't appear in the conversation.
I assume there is a related symptom to my problem, my Call Log doesn't get updated anymore.
Any ideas? I have looked at thread 28371 and seems similar problems but I did not drop my phone...
I have installed avast! Mobile Security in case I have a virus but it comes up clean.
Cheers, Paul.I agree with Slimshaddy's comment above. Make sure the time and date is set correctly on your phone. If you continue to have the problem, try resetting the phone and ensuring the time and date it set correctly before you receive any more messages.
-
I am unable to read PDF messages in my iPad
I am unable to read PDF messages on my iPad even though I do have the Adobe Reader installed.
Alec
Thank you for your quick response. Nothing happened when I opened it. Just before I posted my concern I registered for Adobe, and voila, I went to my message and it opened. Just think that it was meant to be.
QuiltingPennyBend
Sent from my iPad -
Once I downloaded the KitKat upgrade, i was unable to read text messages or MMS messages. Battery life really short, and now I'm unable to get it to load, phone is unusable. took phone into the Version store, and they were not able to get it to work either..
I have 3 Motorola M on my account, one updated correctly, and one has not been updated to the new version. I have since taken the broken phone into the store, and they customer support people were not able to get it to load as well. Pretty much told me there is nothing they can do to make it work again, But I can buy a new phone at full price since I still have 6 months on my contract. Oh that's nice, I can see having to pay full price if the phone was broken by something I did, but not because of a software update. Its very frustrating and not right!
-
Unable to read the message java.io.IOException: No content
Getting the following Exception while reading a mail........
Caused by: java.io.IOException: No content
at javax.mail.internet.MimePartDataSource.getInputStream(MimePartDataSource.java:108)
at javax.activation.DataSourceDataContentHandler.getContent(DataHandler.java:805)
at javax.activation.DataHandler.getContent(DataHandler.java:550)
at javax.mail.internet.MimeMessage.getContent(MimeMessage.java:1396)
at com.test.services.inbound.readmail.BouncedMailReader.processBouncedMails(BouncedMailReader.java:151)
Line 151 is below
{color:#0000ff}*multipart = (MimeMultipart)msg.getContent();*
{color}
But when I manually copy the same mail back to "new" folder from "cur",then the read is successful.
Please suggest.Sounds like Subbaraja may be right, there's no synchronization between the program that's
storing the messages in the files and your program that's reading the messages from the files.
If the program storing the message has only written half the message, and then you try to read
it, you're going to get errors similar to what you got. Adding the call to getMessageID may just
slow your program down enough to allow the writer to finish writing the message.
Of course, the "maildir" local store provider that you seem to be using should be synchronizing
with the other program that's writing the messages, so you might want to talk to whoever you
got the maildir provider from to see what's going wrong there. -
BPEL Process unable to read Inbound messages from B2B Inbound IP_IN_QUEUE
Hi Greetings.
I am working on setting up trading partners at a customer place using BPEL and B2B. BPEL is 10.1.3 and B2B is 10.1.2. The previous BPEL developers developed some processes and deployed them to Development environment. B2B is also set up by them. Lets say the customer name is Pet Safe who is the host trading partner and the remote trading partner is Pet Smart. PetSmart sends Purchase Orders (850s) using EDI over Internet via AS2 connection. My B2B server has received the test PO and sent back the Functional Acknowledgement (997) to the Remote Trading partner. I can see the messages in TIP_BUSINESSMESSAGE_RT in B2B schema of the database which Oracle 10g.
There is a BPEL process called RSCProcess850. It has been developed by using JDeveloper 10g. This process has a AQ adapter configured in the source code of BPEL. It uses a managed connection factory to connect to the Adapter framework and makes a connection to the database, which in turn talks to the EIS to dequeue the messages in B2B inbound queues. This process dequeus the messages and transforms the EDI and puts the PO details into Oracle e-business Suite tables. There is another process called SendInvoice which is configured to a Data Base adapter which polls a table in the Data BAse and sends the invoice to the B2B schema by enqueing the data to OutBound queues of B2B schema. I tried creating a connection factory using Enterprize manage console for both AQ Adapter and DB Adapter but when restarted the server it is unable to load all the BPEL process because the source code of BPEL is mismathching the password. So I have deleted the connection factories that are created suing em console. These connection factories insert an entry in oc4j-ra.xml files for both AQ Adapter and DB adapter. Once I have deleted them and restarted the server all the processes are loading but the problem is the BPEL process is neither dequeueing or enqueueing the messages. There are no errors thrown in the BPEL Domain logs also. The test PO order details are not there in the staging tables of the e-business tables, which means that the BPEL process are not able to DeQ or EnQ using the adapters. How do I know whether the adapter is fetchingthe data from staging tables or not? I am nearing my deadline but unable to proceed I am stuck here. Any sort of help or approach is highly appreciated.
my e-mail Id is [email protected]
Thanks in advance
SudhakarHi,
To test whether the messgae is ENQ or DEQ u can use the sql given in thte B2B user guide.
Ritesh -
OK. Another email question and I know this has been answered previously but I wasn't able to find it this time. My sent emails are reading as "The message from Sandra Xxxx has not been downloaded from the server. You need to take this account online in order to download it." I've actually deleted months worth of emails hoping this would open up some room in my sent box folder, but I still get the same message. Can you let me know how I can retrieve these sent messages?
Thanks. SandraWhat type of mail account is this (POP, IMAP, .Mac). If POP, you probably have the problem described in the following article:
Overstuffed mailbox is unexpectedly empty
As you can see, letting a mailbox grow indefinitely is a really bad idea. If you’re just starting to experience the problem, doing what the article suggests might work. If you’ve let the problem to become worse over time, however, it may be too late to solve it as described in the article, but you may still be able to fix it as follows:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate Sent Messages.mbox and move it to the Desktop.
4. Open Mail. A new empty Sent Messages.mbox will automatically be created within the account folder, and this will allow you to continue using Mail normally while trying to solve the problem.
Although Sent Messages.mbox appears to be a file, it’s actually a special kind of folder (a package) that contains several files. Ctrl-click on Sent Messages.mbox and choose Show Package Contents from the contextual menu to see the files it contains. Of these files, mbox is the most important and is where all your messages are stored. What’s the size of that file? Depending on its size, you may or may not be able to directly import it back into Mail in the next step.
An Incoming_Mail file may also be present, in which case it might contain messages that Mail couldn’t transfer to mbox. Incoming_Mail is also a standard mbox file like mbox proper, just named differently, and can be imported back into Mail in the same way.
5. In Mail, do File > Import Mailboxes and follow the instructions to import the Sent Messages.mbox that’s on the Desktop. I’m not sure what the import options available in Mail 1.x are, but you should choose Other / Standard mbox or something like that, so that Mail looks at the mbox file only (and Incoming_Mail, if present) and ignores the other files in the package.
If Mail doesn’t let you select Sent Messages.mbox in step 5 because it’s a package instead of a plain folder, rename Sent Messages.mbox to just Sent Messages (i.e. remove the .mbox suffix) so that it becomes a normal folder, and try again. You cannot do this directly in the Finder because removing a suffix by normal means causes the Finder to hide the suffix instead of renaming the file. To remove the suffix from the name, you must do File > Get Info (⌘I) on the file and change the name there.
If the mbox file is too big for Mail to handle it, however, you’ll have to break it into smaller pieces. You can do that with an MBOX Breaker Script available at Allan Sampson’s website, or with Emailchemy. The former will ignore the Incoming_Mail file that I mentioned previously, but you may try importing that file directly if it’s not too big or just ignore it if all your messages are in mbox. Also, if you removed the .mbox suffix from the name of the mailbox, you may need to add it back again for the script to recognize it.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library. -
Bridge CC. on opening message says unable to read cache, purge cache. This does not help.
On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.
Mac? REad this http://forums.adobe.com/thread/1237168
-
When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format. -
Unable to read payload from the message object in XI
Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDzHi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav -
When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation
And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I have purged the cache several times and adjusted settings with no change. I also downloaded the entire suite and installed. Do I need to uninstall all of the programs before installing the suite? There is not an option to install only Bridge from the install package.
Maria,
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.
Maybe you are looking for
-
Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks lat
-
I-beam (text) cursor doesn't show on white backgrounds
The I-beam cursor (for text editing) doesn't invert on white backgrounds, which are common in all apps. Hence, it is invisible. This occurs in the following apps: *MS Office 2004 (Word)* FINDER (when you edit the name of a file or folder) iTunes 7 (i
-
No blank first column in Excel after ECC 6.0 upgrade
Hi, I am facing a weird issue. There was a recent upgrade to ECC 6.0, after the upgrade the excel sheets that are downloaded from SAP transaction COOIS do NOT have a blank first column. Is there a way to fix this issue, some external applications use
-
BAPI's from BW to Java-Urgent!!
Hello Gurus, Just wanted to know if anyone has written BAPIs or RFCs ( function modules ) to retrieve data from BW cubes so that the reports could be generated on JAVA application. Which means it doesn't have any table or field information as r
-
RE: BPC 10.0 NW Consolidation of Investment (Multi-level)
Hi Expert, I'm having difficulty in eliminating Holding Company's investment accounts and the Subsidiaries' share capital and retained earning and computing the related minority interest, every time I process consolidation at higher level of consoli