Unable to read shared variable in signal express

Dear all,
I am trying to read a shared variable with data type 'Array of Double Waveform' and the signal express gives a network variable error stating
"The data type of specified shared variable xxxxxx is not supported".
could any one explain why is this not supported or suggest a work around.
Munir.
Attachments:
Untitled-1.jpg ‏66 KB

Hi Munir,
the datatype you want to use is not supported in Signal Express. So if you choose this datatype you always get this error massage. As a work around I can recomment you to take the Double Waveform datatype this is supported, create a shared variable for each array element (waveform) and read this variable in Signal Express. This should help you out.
If you got any questions feel free to ask me.
Regards
TomBaum

Similar Messages

Read shared variable using D/3 DCS

This is a rather odd question.. I think it can be done, but I have not yet figured how.
A client has a DCS System (I believe from NovaTech), which communicates with a database.
They use a different PC to get data from a cFP using Shared Variables.
There is mention of data being sent over a Modbus Interface.
They want to know if it is possible to read the Shared Variables directly using their DCS System. If the DCS was from NI, it would probably be easier to accomplish. However, I am not at all acquainted with the NovaTech product, but I believe there must be a way to innterface to it. Probably using Data Sockets and/or PSP Protocol.
I realize the above is rather obscure... I have sent an email requesting more info and I am preparing the next email. I figured that I'd better do some background investigation and ask proper questions.
Has anyone attempted such a thing or similar? How about reading Shared Variables from Non-NI software? I did find some threads discussing reading/Writing (to/from) Shared Variables using LabWindows-CVI, but I suspect this will be quite different. Maybe I'm wrong..

Thanks Christian.
I will continue in this thread after I find out more details from the client.
RayR

Weird delay reading shared variables

Hello,
I'm working on a project were I'm monitoring some prodution lines. I'm using DSC module's OPC server to connect to PLCs on the production line and I've created bound variables on my labview project of the PLC's tags.
On my project I have one main VI were I show information about the production lines and were I can access several subVIs were I show other information about those lines. Then I have a VI that is running in background were I'm reading about 50 shared variables from the PLC and where I'm registering some data in a MySQL database, datalogging data on the Citadel database and registering alarms.
The problem I'm having is that on the VI that runs in background I noticed a delay reading the variables that are reading containers weights from the production line. It seems that all the other shared variables don't suffer any delay, only the weight variables start having some delay when the values are increasing. It also seems like that, when I'm only running that VI alone, without running the main VI, there isn't any kind of delay. I'm reading the shared variables as shared variable nodes.
Can anybody help me understand what's happening and how can I fix this delay? The VI that runs in background is time critical and a weird delay like that messes up my data.
Solved!
Go to Solution.

Hi Mateus23,
The shared variable has various buffering capabilites, including integration with the Real-Time FIFO feature in LabVIEW Real-Time.
I guess that the buffering settings are causing the unexpected behavior.
Check these resources:
Buffered Network-Published Shared Variables (whitepaper)
Shared Variables Properties Dialog
- Network Page
- Real-Time FIFO Page
~~

How to read shared variables inside event structure ?

Hi,
I have a problem that my shared variables do not update inside event structure. The program(s) I am trying to get working is seen in the attached screenshot. It works as follows:
0. I start the vi that is unsquared.
1. I write a string to a shared variable using vi in red square. I make sure that its updated using write-wait-read.
2. I run the other vi (blue square), this changes the boolean shared variable.
The unsquared vi has been running the whole time, it has event structure bind to boolean shared variable change (the one in blue vi). After I have runned the blue vi, the unsquared vi should change the indicator values to match the ones in red vi. However I have to start the blue vi multiple times to get it to change, sometimes even 6 times.
Also, when I change the value in red vi to a third value and start blue vi multiple times, the unsquared vi shows all the variables. I.e. I put "cat" to red then start red, put "mouse" to red then start red,... and then start clicking blue... Unsqured shows cat, mouse,..., dog (dog is the default).
How can I force the shared variable to update inside event sructure. I want the current value of the variable, not some historical values.
Attachments:
Screenshot-5.png ‏108 KB

Found the buffering... disabling it solved the problem... thanks.
FYI, there is another solution that I just found out... attached. Adding timeout to the event structure and the variable read outside the event structure... This makes the shared variable strings (one that is read outside and the otherone that is read inside) different.
Could someone explain why the variables are in different state even if they are used in the same place and looped with 10ms intervals?
Juha
Attachments:
Screenshot-6.png ‏110 KB

How to read multicolumn data in signal express?

I want to read multicolumn data in LabVIEW Signal Express, how can I do this, when I import the multicolumn data file, it puts all the coulms in one colum ?
Attachments:
Untitled-11.jpg ‏63 KB

Hello Munir,
I have tested this issue and it works properly for me. I am able to load multicolumn data in signal express (see attachment).I look at your picture which you have posted. In fact the delimiter is empty in your task. Even this information is very important and could be a reason for this behaviour. Please look in your text file and find out which delimiter is using between several columns. For example I use a tabulator in my text file.(see attachment)
I hope this helps.
Please feel free to contact me if you have any questions about this issue.
Best regards,
AmirG
Attachments:
SE.zip ‏56 KB

Can not read shared variable on cRIO, error -1950678968 nitaglv

Hardware setup:
Laptop
Laptop connected via USB to a frammer garber.
Laptop IP: 192.168.0.2
NI vision calculating a diameter and setting a network varaible
cRIO
cRIO connected to the laptop
cRIO IP: 192.168.0.1
Project has the shared variable in the cRIO library
NI vision writes to the variable on the cRIO. I can see the variable properly updating in system manager on the cRIO. I can also run a VI in my computer that shows the variable properly updating. But...... When I read the variable with a VI running on the cRIO, I get the folowing error and the variable never updates:
Error -1950678968 occurred at Shared Variable in Main.vi
Possible reason(s):
LabVIEW: Failed to load nitaglv, which is required for Network-Published Shared Variables.
This error or warning occurred while reading the following Shared Variable:
\\NI-cRIO-OASIS\cRIOVariableLib\BubbleDiameterFromVision
\\192.168.0.1\cRIOVariableLib\BubbleDiameterFromVision
(I do not get any errors at deloyment)
So everything (NI Vision, a VI deployed on the laptop, NI Distributed System Manager) can see the variable on the cRIO being updated by the NI Vision.... Except for a VI running on the cRIO.
I have verified that I have Network Variable Engine and Variable Client Support for RT installed on the cRIO. I have tried reinstalling all s/w on the cRIO. Tried rebooting all. And talked in a nice, positive, reassuring voice to the chassis.

Hi!
I just had the same issue with my cRIO 9073 using NI RIO 3.6.0.
The problem is not caused by a corrupted project, but the improper installation of the OS on the target. There is nothing you can do using the SW installation wizard in MAX, as it does not matter if you intall a full RIO SW, minimal or custom.
You have to install the full install or a custom one with Shared Variable support. Then you have to FTP to the cRIO, and manually edit the "ni-rt.ini" file located in the root of the controller.
Make sure you have a line in the "[MODULE VERSIONS]" section which shows the version of the nitaglv.out file. (The problem is caused because this dll is not loaded when you try to access a SV) Mine looks like nitaglv.out=6.3
Then you have to insert "nitaglv.out;" without quotes to the [LVRT] section's StartupDLLs key's value. I did it after the taggerrt.out name. So my key entry now looks like this:
[LVRT]
StartupDLLs=nisysapirpc.out;NiViSrvr.out;NiRioRpc.out;taggerrt.out;nitaglv.out;sysstatepublisher.out;
memoryChecking=False
LABVIEWRTDir=/c/ni-rt/system
PATH=/c/ni-rt/system/;/c/ni-rt/;
CDIntervalTicks=55
WebServer.Enabled=FALSE
RTTarget.VIPath=/c/ni-rt/startup
RTTarget.IPAccess=+*
RTEnetRcvMode=2
RTCPULoadMonitoringEnabled=True
RTTarget.ApplicationPath=/c/ni-rt/startup/startup.rtexe
server.tcp.access="+*"
RTTarget.LaunchAppAtBoot=True
RTTarget.EnableFileSharing=True
server.tcp.serviceName="Main Application Instance/VI Server"
After you are done with the editing, you have to save the file, and overwrite the original one. You have to reboot the controller for the modification to take effect.
After this you will be able to host your variables on the cRIO and also read/write them from the application running on that same target.
I hope this will help for you too.
Regards,
Peter

Reading shared variables

hi ,
im having problems reading a shared variable value from a vi ,
i created a project library , periodic i/o server deployed it. created the shared variables i needed . bound them , created my new vi draged the shared variable i wanted to read , just a time value , set it to a indicator , then ran the two vi s the triangle has apeared on both the main vi and the hmi vi ,and is green , no conflicts arose , but the hmi vi isnt displaying the data ,
both vi s are on the same computer , have i missed somthing ,?

Hi Vadajooz,
Good Morning and I hope your well today.
I was wondering how you got on with your application and if you still require support?
If so, I would be interested to know what version of LabVIEW you are using?
I would make two simple VIs, one to write to the variable and one to read from the variable.
1. Create the bound variable.
2. Deploy the library, make sure it appears in the Distributed System Manager (DSM - LabVIEW 8.6+) or Variable Manager (LabVIEW 8.5 - ).
3. Run the writer VI, for example, just have a switch (true/false) and when you change the switch state does the status update in the DSM or Variable Manager?
4. If so, then run the reader VI, is the status matching the writer and there DSM/Variable Manager.
*DSM/Variable Manager can be found by going to tools>>... in the VI toolbar.
If you are still having problems,
A. There is a known issue with bound variables in LabVIEW 8.6 - so I can inform you on this if you are using it.
B. I would confirm that the variable is deployed - to do this right-click the library and select Deploy All.
C. Make sure you write to the variable before reading from it.
D. Add error cluster indicators and note any errors you see.
E. Please attach your simple (test) project - so we can confirm its correct.
I hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Reading shared variables in C.

Hello all,
How would I recognize the value of a LabVIEW shared variable within the C programming of an mbed microcontroller (LPC1768). We have created a connection between the mbed and LabVIEW, but can't tell if the shared variable we created is actually being passed to the mbed.
Thanks,
Joe Maness

If you extend your LabVIEW by the Measurement Studio option you'll get a licenced .net component called NetworkVariables, which allows to access the shared variables engines processes and it's variables.
I don't no the IDE / Compiler you use to program your controller, but if it's able to handle .net / COM you have all options to access the SVE and there's no need to involve LabVIEW.
Feel free to ask more
Christian

Unable to read shared cd drive

I recently acquired a MBP without optical drive and want to use another MBP's drive to read disks.
Both MBPs are running Mavericks;
I have turned on CD/DVD sharing in the MBP with the drive;
have enabled Remote Disk in the Finder window of the recieving MBP;
both machine are on the same LAN (Time Machine)
CD it is not a protected - just data with PDF files etc.
Even though the remote MBP appears in Finder, when I click on it all I get is "Waiting for disk drive". (The disk opens fine in the remote MBP).
Am I missing a step in the setup?
Rob

I don't like putting two drives on the same bus, so I would move one of your drives to the front drive cage. And, if Apple Hardware Test doesn't find any problem with the Mac itself, you are going to have to initialize it.
You may not feel you need new drives, but 3 yrs for ATA and you can expect possible problems. Having two backup sets - one of which is always off line - should be mandatory.
If you can't repair it from your boot drive, and you have tried "a few things" (always helps to know so we don't waste time with what has been tried) like Disk Warrior, what is the SMART status? time to buy a new drive - even if it can be repaired. If in your "tried a few things" like to erase/partition the drive?

VI cannot find shared variable in engine despite successful deployment

I am unable to use Shared Variables to communicate between VIs located on my PC and the VIs located on my cRIO-9014. This is a new development as I have been running the same VIs for over a year without this problem. The only recent development is that the IT department at my company installed new virus protection software and changed some windows firewall settings on the PC that I am using. This problem first began as soon as I got the PC back from IT. I have since unblocked LabView in Windows Firewall but that has not fixed the problem. The error I get every time I try to read a shared variable on the real time target is:
Error -1950679035 occurred at Shared Variable Read in RT Interface.vi
Possible reason(s):
LabVIEW: (Hex 0x8BBB0005) Unable to locate variable in the Shared Variable Engine. Deployment of this variable may have failed.
I have redeployed all of my shared variables and according to LabView the deployment was successful, yet I still get this error every time. Is it likely that something the IT department did with the Antivirus/Firewall software has blocked communication between the cRIO-9014 and my PC? I have used Measurement & Automation Explorer to check communication with the device and as far as I can tell everything seems fine.

After adding LabVIEW to the exceptions list of Windows Firewall, my issue seemed to be cleared up. I am now getting the same error message once again, but now I get it every time I run a VI with shared variables and it actually pops up an error message asking me to continue or stop. Again, according to LabVIEW the shared variables deployed successfully. I looked at the two KB articles that were posted and it seemed like this error has three causes:
1-Unsuccessful deployment - everything seems to have deployed
2-Firewall Issues - were taken care of to fix my original problem
3-Shared Variable Engine not running
I've looked around and I found a reference to 'repairing' the shared variable engine but not a guide for how to do that. I have opened variable manager (I am using LabVIEW 8.5) and have stopped and started the shared variable engine with no effect.
What are steps I can take to ensure the Shared Variable engine is running properly?

Is Shared Variable Engine with LV8 an OPC server ?

Hello
Is the shared variable engine with LV8 an OPC server ?
Does any OPC client can acces to Variable Engine OPC server an read shared variable ?
Can I build an installer and deploy my application with Variable Engine OPC server on other PC without LV8.
Thank you

Hi
You can communicate between an OPC serveur and LV8 and use shared variable. To deploy an LV8 exe application, you must have the run time engine installed on the PC without installing LV8. You can create a setup with LV 8 in which you can integrate the run time engine.
Kamal
NIF

Shared Variable Engine

Hi,
What happens to network variables stored in the RT machine after a restart(after calling RT restart). I am experiancing weid behaviour.
They seem to reset to a default value and I checked in the project via their propertis, Initial values is not set, and there are no callers at the start of the VI.
Anyone has any ideas for this? Or at least tell me if values should persist after restart or reset?
Thank you very much,
Mihai

Hi,
I use shared variables stored on a PXI RT embedded controller.
After a reboot, the variables are not set to the default value corresponding to their data type structure but to a "no known value" state (I don't know how it's exactly labelled in english, as I use a french version of LabVIEW).
I noticed that if you try to read a shared variable in a "no known value" state using the "read variable" VI, you just get a warning. If you use the "read variable with timeout" VI, the code waits for a modified value of the variable, but once the shared variable has been initialized (ie has a known value) no stop occurs at the first reading with the "read variable with timeout" VI (even with an infinite timeout), as the current value of the variable when the code is launched is viewed as a "new" value.
Not sure that this message will help you
I've also experienced strange behaviours in reading shared variables : I've posted here a message in the french section af the forum, but without answer ; I plan to repost it here after new tests.
Best regards,
HL

Shared Variable Crashing LabVIEW

This is just one of those projects that has a brick wall at every turn so far. Two computers running LV2009. Computer A hosts Data Write Shared Variable. Computer B hosts Data Read Shared Variable. Data Read is bound to Data Write. Everything was working fine, and then late yesterday afternoon, I don't think I had changed anything on the shared variable, I start up my VI on Computer B, and LV crashes. The VI starts to run until the first execution of Data Read, and then poof, everything open in LV dissapears. The problem is one hundred percent repeatable since then.
Here is what I know:
1. An error indicator hooked to Data Read shows -1950679034 (Shared Variable has no value) for about a second before the crash. Everything stops executing as soon as the warning appears.
2. The Data Write is single writer, but it is also occasionally read in the VI that it is written in. It is not being read when the crash happens. I can however perform the read on Computer A without incident.
3. Not sure if this is related, but if I open the VI on Computer B, and then open the project, I am not able to drag Data Read from the project onto the block diagram. I also cannot perfrom any operations on the Shared Variable (like right click, ignore timestamp). I have to close the VI and reopen it from the project. Thinking back, this problem may have started when I opened the VI without opening the project.
I am torn between abandoning Shared Variables and trying to figure this out. I would definetely prefer to use the Shared Variable, especially because I need some buffering. I'm guessing I can buffer things some other way. Not sure if I can remotely access a queue, or ... ?
Solved!
Go to Solution.

I looked at STM, but I think the Data Socket VI's may be a better fit for me. It seems like Data Socket and shared variables are sort of intertwined, but I'm hoping DS doesn't suck as much as the SV seems to so far.
I think NIC means network interface card? Anyway, I don't really know how many I have. The Data Writer is on a PXI8108 with Windows, the reader is an old crappy Dell that I inherited with the desk.
I'm also not sure about the logos.ini file you referred to.
My intention is to transmit an array of double waveform that is about 15 - 20 channels acquired at 100 - 1000 Hz. I think the Data Socket looks like the simplest way to do this, and I could live with 100 Hz if speed is a problem, but I sort of don't think it will be. I'll try tomorrow unless somebody has a better suggestion.
By the way, I saw in another post a similar problem with Shared Variables that is supposedly fixed with the new patch for 2009, but I'm not sure I trust SV's because this will, for about thirty seconds of its lifetime, be one of the most critcal applications I've written, so I want confidence that it will work for those thirty seconds.

Datasocket and Shared Variables

I am curious if there is any advantage to using Datasocket to read/write shared variables (as opposed to a direct read/write). I'm specifically talking networked shared variables here.
Is there any speed advantage to accessing shared variables thru the Datasocket functions? Since both a direct read/write and a Datasocket PSP read/write talk to the same variable engine I assume they are equally efficient but I'm looking for confirmation here. I've seen benchmarks for shared variable performance but none of them use DS/PSP to access the variables.
Normally I would not even think of using Datasocket to access shared var's but where I currently work we have a large app that does this and it works great. I suspect that this functionality only exists in LV8.x for backward compatibility and non-Windows OS compatibility and is not really meant to be used for new, Windows-based apps? Am I off base on this?
I am working in LV 8.5, BTW.....

Hello Jared,
Thank you for the reply with clarification.
Based on your comment, I changed the buffer parameters and also tried the programs with two different data types, previously StringArray and now String.
In the attached LV8.6 project, you have all the programs, and shared variable library to review my tests.
There are two sets of two files - each set has a Write Shared Variable and Read Shared Variable file. One set is for StringArray type Shared Variable (named StrArr in the library), and the other set is for String type Shared Variable (named Str in the library).
String Array example:
MultipleDS-Write-SharedV-StrArr.vi / MultipleDS-Read-SharedV-StrArr.vi
In my String Array shared variable, I use only 4 element array, each having 4 character strings - meaning 16 bytes per String Array data. I have two loops in the write file, writing to the same variable, an array of 4 strings, each loop continues until the loop index is >0. This means, sometimes, depending on the processor speed, the variable will be written 3 times or 4 times (the variable could have a new value before the loop condition is checked).
So this means, if I have buffer of 100 bytes (16*4=64<100), it's enough for 4 such arrays (of 4 elements, each element with 4 characters) could be buffered to have sufficient time at the client (Read) program to read them.
I am putting 2048 bytes in buffer, which is much more than sufficient in my case.
The writer loops run with 200 ms to wait for each iteration. The reader loop runs with 100 ms in DS timeout and 100 ms in wait timer. This gives results without any loss. However, if I run the reader loop with 1000 ms to wait for each iteration, the data is lost. The buffer is not maintained for 2048 bytes.
In the read program, just to make sure if all data is read or not, I am showing data in two different string indicators, showing data of each loop.
String example:
MultipleDS-Write-SharedV-Str.vi / MultipleDS-Read-SharedV-Str.vi
The String Array shared variable didn't show values in the Distributed System Manager. Hence, I created another simple variable with String datatype.
The writer program writes strings of 4 characters, one-by-one, in two loops. Meaning, total 8 strings of 4 characters each are written in the "Str" Shared variable.
The reader program, however, doesn't always display all the 8 strings. Although the wait timer is not high (slow) it still misses some data usually. Data is overwritten even before the buffer is filled (in buffer, I have defined 50 strings with 4 elements in each).
In both of the Read programs, I read using datasocket. I think thought datasocket has more ability to buffer. Earlier I had "BufferedRead" in DataSocket, which I have changed to just Read, because BufferedRead didn't give any special buffer advantage in the Shared Variable reading.
---- This is an update on the issue.
Ok, just while typing the last paragraph above, regarding datasocket, something clicked in my mind, and I changed the DataSocket functions to simple Shared variables (completely eliminating datasocket functions) in the read programs as well. And bingo, the buffer works as expected, even if I have reading loops very very slow, there is no data loss in any of the program sets.
The two changed Read programs are also included in the attached project - MultipleSV-Read-SharedV-Str.vi and MultipleSV-Read-SharedV-StrArr.vi
So this means, I can completely eliminate DataSockets (not even using PSP URLs in DataSocket Open/Read functions) from my programs.
One question here, what will be an advantage of this (or any side effects that I should be keeping in mind)?
Vaibhav
Attachments:
DataSocket.zip ‏71 KB

Shared variable sampling rate

Hi, I would want to read some shared variable on the network at 1KHz on SignalExpress but I'm actually limited at 200Hz on it.
Is there any possibility or not?
Thanks.

Hi pattegain,
I'm not sure reading shared variables published on the network at 1kHz is possible.
I suggest you to read this :
Buffered Network-Published Shared Variables: Components and Architecture
http://zone.ni.com/reference/en-XX/help/371268P-01/expresswb/read_shared_variable_se/
However, I tried the Shared Variable Examples (Reader and Writer) and I have been able to run the Reader with 0,002 sec (500Hz) as Sample Period parameter. Did you test those examples?
Regards,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Unable to read shared variable in signal express

Similar Messages

Maybe you are looking for