Unable to rearrange new playlist

I put a new playlist together last night, after doing the 8.2.1 update. Oddly, I can't rearrange the play order on this new list. Yet, I can still rearrange older lists. What gives?

Make sure shuffle is turned off, and make sure the little triangle is over the number column. (If the triangle is over some other column, the list will stay sorted by that column and the tracks cannot be moved.)

Similar Messages

  • I am unable to transfer my playlist to my Ipod in the new version of Itunes.

    Since downloading the new Itunes I am unable to transfer my playlist to my Ipod.
    I have tried dragging individual tracks but it will not let me load anything. 
    The symbol for my Ipod is no longer in the left column of my screen but at the top right hand corner.
    Can you help please.

    I also found that my previously paired 1st Gen Apple TV did not show up at all in itunes, after updating to version 11.
    I basically resolved this by re-pairing it.
    There may be less drastic steps that can be taken? But I found removing and then re-adding the pairing did the trick.
    A bit arduous I suppose... effectively a minor reset of sorts... but my resolution steps were:
    1) Removing the itunes sync account (at top) from the Settings->Computers screen on the 1st Gen Apple TV.
    This took a while, and some faith, as it then removed all synched content from the Apple TV, which took several minutes... and I wasn't convinced I'd be able to then restore the sync.
    2) After that process completed, I then clicked the option to add (re-add) the itunes sync account, on the Apple TV, noted the new code, went back to itunes (11.0.5), found the now unpaired Apple TV (that was now showing up again) in the left hand "Devices" list, and clicked "Setup", and then entered the new pairing code.
    This let me set up synching again (although I sync the majority of my library content, in fact I set it up with the "Custom Sync" option) ...and so far, so good. It is now synching my purchases from the Apple TV into itunes, and vice versa, as it was before.
    Hope this info helps someone else with a 1st Gen Apple TV...

  • Unable to add music to new playlist

    The last time I synced my ipod touch my playlists didn't sync back over and now when I try to update the software it crashes. I created a new playlist folder but I am unable to add any songs

    If a PC:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    - Backup and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • Unable to create a new playlist on Itunes when in "On My IPhone " mode. New playlist shows as greyed out. Why?

    Before the recent update on Itunes, I was able to create new playlists and drag music diretly into saved playlist folders from my laptop. Now, I can't do either because when in the what's on " my Iphone" mode, trying to creat a playlist is impossible because it is greyed out. I can no longer drag and drop music into saved playlist showing on my phone. What's going on Apple? or anyone.

    Csound1 wrote:
    Don't press the option key, instead hold down the command and R keys, if recovery is present that will take you there.
    Thanks for this suggestion, but I have already tried that. The only way for me to boot my mac is by starting in single user mode and mounting the drive, then exiting from there. Nothing else will work, I cannot press Command-R, so this will not work.
    Thank you both for your suggestions as well. I found your help useful and it will help me solve this :-)
    I have ended up buying a Flash Drive, and will now download the Mountain Lion installer. I assume that I will be able to boot from this, and then use Disk Utility to format the drive, and later on install Mac OSX Mountain Lion on it?
    Thanks Again.

  • I am unable to put new songs on my ipod

    I am unable to put new songs on my ipod. When I put new songs into my itunes, i see them just fine. I go to sync my ipod and it says "sync is complete" within seconds, so I know nothing has been synced. New playlists are also not showing up. Many of my default playlists show up multiple times(90s music, recently played, etc). I have the 30 gig ipod with video. There are about 20 gigs on it. Thanks.

    ok the manually manage music box was checked, I don't know how. That seemed to help. As long as I have you here perhaps you can help me with another problem that happens from time to time. My ipod likes to fall asleep when I'm syncing it. It goes to the apple icon on the ipod, stops syncing, and then starts back up again. The problem seems to go away when I restart the computer and/or itunes. I'll occassionally get an error message that says "the ipod "mullen's ipod can be synced. The required file cannot be found." Then I get the message at the top of the screen that says sync complete. In some cases it actually is synced! Any thoughts?

  • Unable to load movie playlist?

    I'm really starting to regret Upgrading to Director 11. I
    didn't have any of these issues going from MX to MX 2004. All I'm
    trying to do is make a simple projector work on a Mac and it's one
    issue after another. Not to mention all this after updating a whole
    boat load of Xtras 11 requires.
    The new one is this;
    Unable to load movie playlist. Does the INI file exsist? It
    must contain a section '(Movies)' with an entry
    'Movies01=pathname.dir'.
    I've already read a couple of other forum post with the same
    error message going on with others but can't find certain files
    required to make the fix like the 'Projec32.skl',
    and I don't know how to read, let alone make an .INI file.
    I'll mention I got this error after updating to Shockwave 11
    EVEN though I was not publishing a Shockwave movie.
    I know I just need to include a certain file on my CD when I
    burn one because all works great on the desk top, but I'm throwing
    darts trying to figure out what the CD burn is missing.
    So to make a long story short does anyone know what I might
    be missing?
    I'm new to making director movies for the Mac, and even using
    a Mac so I might need it spelled out a little more for being a
    novice.
    Thanks in advance. :o)>
    PS I tried making a Mac Projector from my PC with no good
    results either.

    This is a very frustrating problem.  I have run into it as well, but can't tell you exactly how I solved it, its been a while since I've seen it.  It does have something to do with the length of the path to your projector when its published.  I would suggest moving your movie as close as possible to the root of the drive, you may even want to restart to ensure all the internal variables have been reset and then republish the movie.
    If you publish the movie from your authoring location and then copy the projector to a cd or the desktop the path length seems to be built into the projector at publishing. So that does not solve the problem.  It is fairly easy to get a long path name - c:/mylocaldrive/documents and settings/yourusername/yourprojectsfolder/yourprojectname.dir has a path name length of 100 characters!  I realize you are on a mac, but the same rules apply.
    I also might be mistaken with the maximum path length.  Perhaps its 128 characters?
    Has anyone else run into this error?
    Mike M

  • Can not drag songs into new playlist

    itunes issue, Unable to drag songs into new playlist folder.
    New itunes 10.4
    has not worked since I installed Lion
    Macpro 2.66 GHZ Quad-Core xeon

    Probably something very simple and might be quicker answered if posted in one of the iTunes forums?
    https://discussions.apple.com/community/itunes
    Regards,
    Colin R.

  • The screen no longer displays a playlist column and when I hit the plus sign the screen no longer has a right side column to let me make a new playlist. Now what?

    The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?

    iOS: Unable to update or restore

  • I copied my entire iTunes folder to my new Mac and now new playlists won't sync to my iPhone.

    Hi. I recently installed a new hard drive to my Macbook Pro and as I wanted a clean start decided not to restore from Time Machine. I just copied the entire old iTunes folder into my new music library. iTunes itself functions normally but it won't sync new playlists to my iPhone 5.
    I had similar problems with syncing my iPhoto library to my iPhone through iTunes but I rebuilt the iPhoto library and that seemed to fix it. Is there a way to rebuild the iTunes library? I used this document:
    http://support.apple.com/kb/HT1451?viewlocale=en_US&locale=en_US
    and was given error code -50 saying it was unable to import the playlists.
    Any help greatly appreciated.
    Max

    Hi. I recently installed a new hard drive to my Macbook Pro and as I wanted a clean start decided not to restore from Time Machine. I just copied the entire old iTunes folder into my new music library. iTunes itself functions normally but it won't sync new playlists to my iPhone 5.
    I had similar problems with syncing my iPhoto library to my iPhone through iTunes but I rebuilt the iPhoto library and that seemed to fix it. Is there a way to rebuild the iTunes library? I used this document:
    http://support.apple.com/kb/HT1451?viewlocale=en_US&locale=en_US
    and was given error code -50 saying it was unable to import the playlists.
    Any help greatly appreciated.
    Max

  • Zen Xtra unable to create new or update playli

    I am unable to create new play lists on my Zen Xtra. When I use the Zen itself, it looks like it creates the playlist but when I open it, the Zen screens draws a box and prints "error" in the box. Using Nomad explorer, it creates the list, I can add to it, delete from it, and it appears to work in every way but when I try to open it on the Zen, I get the little box and the word "error" in it. I tried taking an existing playlist, removing all the titles, add title to the playlist and I get the same eror message. I have run the clean up disk from the utilities menu on the Zen. I have also upgraded to the latest firmware version. Other than the error on the play list, the unit works perfectly.
    Any suggestions?
    Thanks
    Randy

    Does this player have an upgraded hard disk?
    Either way, how many tracks are on the player?

  • IPhone 5 iOS 8.2 no "new playlist" option in Music

    I have an iPhone 5.  my wife has an iPhone 5c.  when we each look in our playlist section of the Music app, her's has a "button" called "new playlist" and mine does not.
    is there something wrong with my phone or a switch that i can turn on to make this option available for my phone?
    thanks

    Hello timmyboylad,
    Thanks for using Apple Support Communities.
    As a first step for troubleshooting this issue where you're unable to create a new playlist, please update your iPhone to iOS 8.3.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Have a good one,
    Alex H.

  • Unable to create a playlist on ipod mini 6gb

    I bought a used ipod. When I'm in itunes and the ipod is highlighted, I click new playlist and it just adds the new playlist feature to my itunes library and not to the ipod itself. It seems I am unable to add a playlist to my ipod. Help, please.
    G4 cube   Mac OS X (10.3.2)  

    I think I can drag a playlist from my itunes library onto the ipod (blindly) and it will show up as a playlist on the ipod.
    Any idea why I can't see the playlist on my ipod when the itunes app is open?
    Thanks.

  • My ipod touch 2 no longer recognizes or syncs new playlists from my computer.  But it does takes the playlists from the ipod and syncs to the computer.  This is a reverse process - what am I doing wrong?  It always synced the correct way in the past.

    Why doesn't my ipod touch 2 recognize or sync new playlists from my computer?  It did in the past, but now the syncing process goes in reverse; the
    playlists on the ipod touch 2 sync to my computer!

    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    - Backup and then restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Unable to download new songs from iTunes

    I have iTunes 7.6.2 and when I plug in my iPod I get 'syncing' then 'its ok to disconnect' message and I'm unable to download new songs I just bought. I tried this on 2 computers and the same results. One is running XP Pro SP1 and one is running Vista SP1 and the same issue with both pc's.
    Any suggestions?

    iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
    Upgrade OS X on your Mac.

  • Unable to see "New from Par" option while creating Custom portal layout

    Hi All,
    I am unable to see "New from Par" option in Content Administrator. I am trying to create a custom page Layout for which I am need create layout using new par file. I am not able to see this menu option. Does anyone know from where to enable this option?
    Nitesh

    There is no option like "new from par" from ep 7.
    Create an iview based upon portal components.
    check the below link for creation
    http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm
    Koti Reddy

Maybe you are looking for

  • Help with K8N NEO 4 and AMD X2 3800+!!!

    For christmas i got a new AMD Athlon X2 3800+ CPU. System Specs Below. AMD Athlon 3800+ Dual Core CPU MSI K8N Neo4 Sli motherboard, nforce 4 chipset XFX Geforce 7800GT 256 MB PCI-E GFX Card 2X512 MB Corsair XMS 3200 Xtra low latency memory Antec True

  • Created ringtone, but itunes created a Tones folder instead of Ringtones

    I created a ringtone by cutting a song up into a 29 sec. clip. converted to .m4r and synced with my iphone.  itunes and the phone created a Tones folder and put the file there, but there is no Ringtones folder and I cannot find the tone on the phone

  • Download file doesn't open

    Then downloading file i cannot open the file

  • Custom XML worked on 10.2.0.4 after upgrading to 11.2.0.1 it fails

    Hi Our developers had written custom jobs in ebus11i using XML publisher , now we have upgraded to 11.2.0.1 and it stopped working We have logged a TAR and Oracle say they dont support custom code Anyone can help Ahmed Jassat Oracle APPS DBA @ Medsch

  • Proxy agent in solaris ldap client

    Since ldap service provides naming service, that is supposed to be accessed by anyone who needs it, I don't know why we need a proxy agent when we set up solaris ldap client. The anoymous credential level is enough. Also in order to use proxy agent,