Unable to receive Buyer Work Centre Complex PO

Dear All,
I created Complex PO through Buyer Work Centre and approved it but when i go to receive this PO system not found the PO, even i select the same organization. Kindly help me regarding this issue.
Regards,

user12217438 wrote:
ok so how can i create invoice and match with this PO
Regards,Hi,
There are two options.
1. Run the Receiving Transaction Processor once the work confirmation is created which will create a receipt. Then you create invoice manually and match accordingly.
2. If you are using RCTI, then the invoice will also be created automatically along with the receipt.
Thanks,
PS.

Similar Messages

  • How to see Planned Purchase Order in Buyer Work Center

    Hello,
    I need to see Planned Purchase Order
    (created in Purchasing Super User(responsibility) => Purchase Order -> Purchase Order , Type (Planned Purchase Order))
    in Buyer Work Centre.
    I can see Standard Purchase Order in Buyer Work Center (under Orders Tab).
    I can see Contract Purchase Agreement in Buyer Work Center (under Agreement Tab).
    I can see Blanket Purchase Agreement in Buyer Work Center (under Agreement Tab).
    But can not see Planned purchase Order in "Buyer Work Center".
    Is this intentional ? If yes, then why.
    if no, then where we can see Planned Purchase Order in HTML pages.
    Thanks,
    Vishal Garg
    Mb: 9985803224
    Email: [email protected]

    hi
    there is no standard report which shows the expenditure/conditional value in po. you have to develop your customs report./

  • "Unable to find a working IR device" Error (Audigy

    I just bought the Audigy 4 sound card today, and did a Full Installation. Unfortunatley, the remote does not work. When Windows XP loads, Windows says it has found New Hardware and identifies it as "Creative USB IR Recei'ver", but it can't locate the files to install it. When I press a button on the remote, the red light in the receiver lights up, but nothing happens. Also, when I try to launch Creative Entertainment Centre Settings, I get the following error: "Unable to find a working IR device". I tried uninstalling everything and then installing it again. This didn't fix anything. I also downloaded the latest drivers and tried another USB port. Needless to say, neither fixed the problem. I really want to get this remote working. Can someone please help me out? Thanks in advance.Message Edited by Marce22 on 2-02-20060:0 PM

    _ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

  • I am unable to receive texts on my new LG G2 when sent from some other iPhones

    I had an iPhone 4 and switched to LG G2 android.  I am unable to receive texts on my new LG G2 when sent from some other iPhones.  I've done everything Sprint and Apple have suggested - turned off imessaging, made sure the contact info on the other iPhones is plain mobile numbers, deactivated my iCloud account.  Nothing is working.  Anybody have any suggestions?

    See this support document http://support.apple.com/kb/TS5185. If you have done everything there, then look at the last line which says to get in touch with Apple Support. This is not Apple support, this is a user to user forum. Call Apple support based on your location with information from this support document. http://support.apple.com/kb/HE57

  • Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

    I have Audigy 4 Pro with the RM-500 remote that came with it.
    The remote is not working in Vista 64-bit (Enterprise).
    It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
    When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
    <img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
    <img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
    Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
    Regards,
    Lawrence

    _ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

  • Unable to receive Queue Message Unable to create Queue in MDM 2.0.1

    Hi All,
    I am getting below exception when i am trying to read JMSQueue from weblogic server to MDM 2.0.1
    Steps i configured as below:
    Created XAI JNDI server : XAI JNDI Server(Demo), Provider URL(http://localhost:7001), Initial Connection Factory(weblogic.jndi.WLInitialContextFactory)
    created XAI JMS Connection:XAI JMS Connection(DemoConn), XAI JNDI Server(Demo), JNDI Connection Factory(weblogic.jms.XAConnectionFactory)
    created XAI JMS Queue: XAI Queue Name(DemoQueue), Queue Name(TestQueue), XAI JNDI Server(Demo)
    created XAI Receiver DemoRx mapped with XAI Class JMSRCVR and with above configurations
    MPL is creating intial context factory for jndi server properly and intializing queues properly.
    But getting namenotfound exception at Receiver DemoRx
    [Thu May 26 15:01:46 IST 2011] Receiver DemoRx - Read interval is 10 seconds.
    [Thu May 26 15:01:47 IST 2011] Receiver "DemoRx" initialization failed:Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
    com.splwg.mpl.receiving.ReceiverInitException: Unable to receive Queue MessageUnable to create Queue: javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TestQueue'. Resolved '']; remaining name 'TestQueue'
         at com.splwg.mpl.jms.queue.JMSReceiver.prepareConnection(JMSReceiver.java:394)
         at com.splwg.mpl.jms.queue.JMSReceiver.init(JMSReceiver.java:266)
         at com.splwg.mpl.receiving.AsyncReceiverManager$1.call(AsyncReceiverManager.java:232)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    Please help me in this regard
    Thanks in advance,
    sukumar

    Hi Suraj,
    I would prefer to discuss the problems in the forum. There are maybe other that have the same problem and they could then participate from the discussion.
    No back to your problem:
    As fare as I know there is no build in function to read directly from file system.
    MPL is no longer supported in this product and this was the only module for reading the file system.
    You have to develop an application to fetch the files form the file system or you must use an Enterprise Service Bus
    like OSB or ServiceMix.
    To enable the system for the IMD import you have to publish a Business Object or Script via XAI Inbound service.
    The recommended way is to use the D1-IMDSeeder BO.
    There is a chapter in the MDM Configuration Guide, explaining how to setup the XAI Inbound service.
    There is also a service script available. The advantage of the service script is, that you can import IMDs for more than on device (D1-IMDEvtUpl and DM-IMDEvtUpl). The DM-IMDEvtUpl is eventually only in the demo database available.
    The disadvantage of the IMDSeeder is, that you have to setup a lot of configurations in the system. There is another thread in the forum explaining the setup.
    My preferred way is to use the D1-InitialLoadIMDScalar or D1-InitialLoadIMDInterval BO but you have to do a lot of things by your own.
    /Markus

  • Unable to receive gmail through apple's mail app 4.3 on Mac Book Pro

    I am unable to receive gmail through apple's mail app 4.3, on my MacBook Pro although I can receive my email on the gmail web site. *I can send email through Mail with no problems I just can't receive any e-mail in Mail.* Recently I got a message that my user name or password was incorrect. I made sure the information was correct but still I can't receive any e-mail in Mail. Could somebody please help me?
    Here are the settings. Are they correct?
    Account Type: Gmail IMAP
    Incoming Mail Server: imap.gmail.com

    I had the same problem. The unlocking mentioned above worked for me. Right now mail.app is downloading the messages.
    I've also on other message boards found a link for correct setup: http://www.macobserver.com/tmo/answers/howto_setup_gmail_imap_andmail.app1/
    The key here is to go to labs and enable advanced IMAP settings.
    I'm not cheering yet if I hover over the folders / labels that are synced I get de message "Unable to open "foldername""

  • The Sender unable to receive delivery and read receipts

    The Sender unable to receive delivery and read receipts through ironport (outbound).
    How does the delivery and read receipts works in ironport?
    However, The Sender able to receive delivery and read receipts without ironport (outbound).
    Please help!
    Alex Ling

    Hi Alex,
    At this time, the IronPort does not support positive DSNs ( read recipiects ). Refer to the following Knowledge Base article:
    http://tinyurl.com/yo78ns
    -whardison

  • Why am I unable to receive incoming mail?

    Why am I unable to receive e-mail but I can send it? Mail version 3.6 for Macbook.

    I took it to the Apple store and it had them all stumped. They kept saying I had to have a "bad" e-mail that was preventing others from passing. They tried to erase all e-mails but it still wouldn't work. When they were just about ready to give up the man decided to wipe out anything having to do with e-mail-and start a new account, so I lost messages, but once he cleared all e-mail related items on the laptop, the mail went through!!!
    I haven't had problems since- so....I hope that helps!!

  • How to print a RFQ from buyer work center

    Hi everyone,
    We are unable to find out why there is no action to print a RFQ (or RFI) from the buyer work center. There is no option for it Under the action LOV. How could it be done without returning to Forms screen and even there what is the concurrent programs to print it if it exist ?
    Regards,
    Jean

    Hi Jean,
    Check this MOS note...it should be helpful.
    "How To Make Print Options Available In Action Menu In Oracle Sourcing [ID 738244.1]".
    Thanks
    -Arif.

  • Unable to receive emails on third party account

    Hi
    I have several email accounts all at the same domain. They have worked flawlessly for 2 years until today,
    I am no longer able to receive mail on these accounts using BT Broadband however when I switch to my mobile broadband I am able to receive my mail as usual.
    I contacted BT who remotely changed my Send details even though sending mail was working fine till the changes. I have returned the Send settings back to where they were.
    Please does anyone have an idea what could be wrong.
    Many thanks

    Hi
    No my email is with daily.co.uk and my mobile bb is TMobile.
    I have reset all my settings and can send/receive using TMobile. I can send using mail.daily.co.uk but am unable to receive when using BT BB.
    My mail was working fine this morning

  • Buyer Work Center

    We have below Business Requirement  on Buyer Work Center  ( R12.1.3)
    1.  View Price/Amounts in particular format e.g ( 1000,000.00)  on Orders Tab in  Buyer Work Center.
    2.  Allow only two decimal values to be displayed in the Price Column even though they may copy and paste a value that has more than two decimal values from a excel while Creating Complex PO in Buyer Work Center
    Please suggest as how we can proceed to meet the above requirement.
    Regards
    Udit

    Dear Udit,
    For the first requirement please refer to the Profile Option  ICX: Numeric characters and make sure XDO: Numeric Characheters is pointing to this profile option.
    For Comma Separator of 1000's, you may need to enable Currency:Thousands Separator to 'yes'
    Bounce oc4j (iAS/Apache) and clear cache, and then retest to confirm
    For the Second requirement, you will have to personalize the OA page, please refer to guidelines as per note:
    How To Restrict Entry Of Decimal Value For Fields Such As Price On Purchase Order (Doc ID 1376060.1)
    Similar to the personalization done in the form, get an OA developer to do it for the BWC Pages.

  • Unable to receive e mails

    I am unable to receive e mails on my new Q10.
    The account set up advice provided by my services provider, is for the Z10 model, but does not seem to work - in that i can send e mails but not receive them. There is also an anomaly with the smtp server settings which differ from those listed for the Z10 - but which work for sending e mails.
    the server settings i am using are;
    o/g; pop.outlook.com - port 995
    smtp; pod51017.outlook.com - port 587 (setup instruction says to use smtp.outlook.com - but this doesn't work)
    The above setup allows me to send but not receive
    any other combinations and i get a message to say the server is not responding, when i try to validate the account.
    i have searched but can't find any specific set up info for the Q10 - not sure if the operating system is the same?/
    can anyone help

    The device model doesn't make a difference here. The OS might make a difference in UI organization, don't know, but in the bigger picture it doesn't make a difference.
    Did you try the basic method of just entering email address and password in setup and let the BlackBerry and servers do the rest? For outlook.com that should work, I believe. http://crackberry.com/how-add-outlookcom-email-address-your-blackberry
    Also, I would use POP3.
    - Ira

  • SRM Notification sent but user has not received the work item

    The notification is received by the user but the work item is not actually visible in the user's inbox.
    Please suggets what to do?

    Hi
    The user will receive the work-item in few cases only.
    1) Incase the manager has partially rejected the Document.
    2) Incase Buyer has made some changes to the Document.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Weblogic Spring MDP consumer unable to receive message

    Hi,
    we have a weblogic cluster(2 machine, 2 instance per machine)
    I have configured JMS server in each instance and a distributed Queue
    DominName : hmidomain Weblogic 10.0MP1
    And four instance of managed server and JMS server
    gdmsdomain(admin)
    instance11,JMSServer11
    instance12,JMSServer12
    instance21,JMSServer21
    instance22 ,JMSServer22
    Each JMS server is targeted to the corresponding Instance
    connection factory and Uniform Distributed Queue target my cluster , sub deployment is Default Targetting.
    I have a spring application with has Message Driven Pojo ,which has 4 listener container, each one are configured to connect to one instance
    when I run the application in Tomcat all the consumer are evenly distributed to the instance and Able to receive messages.
    when I try to deploy the same spring application in another weblogic server(different machine and different domain)
    The setup of this server
    DominName : wasdomain Weblogic 10.0
    hmidomain(admin)
    No cluster, I deploy the application in admin server itself I face the following problem
    1) Consumers get registered but unable to receive messages
    2)If I restart the server, then they are able to receive messages, until I do a update to the application. If I do an update to the project it fails to reload and leads to a server restart.
    Initially I got exception as java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[system, Administrators]
    After adding the security credentials for JNDI template, I don't get this exception but still it does not work.
    the connection and Queue are not secured.
    I am not using any bridge or SAF. but not sure if it has anything to do with Domain security.
    As you might have seen above, that I have unique name for all resources and both the Domains are in same network , no firewalls
    As mention earlier the Spring MDPworks fine in tomcat with out any issue.
    I have not posted any config codes, If you need it, please let me know.
    Any help to fix this issue is appreciated.
    Thank you
    Edited by: Kannan Mugundan on Jan 30, 2010 1:49 AM
    Edited by: Kannan Mugundan on Jan 30, 2010 1:52 AM

    Kannan Mugundan wrote:
    Hi,
    we have a weblogic cluster(2 machine, 2 instance per machine)
    I have configured JMS server in each instance and a distributed Queue
    DominName : hmidomain Weblogic 10.0MP1
    And four instance of managed server and JMS server
    gdmsdomain(admin)
    instance11,JMSServer11
    instance12,JMSServer12
    instance21,JMSServer21
    instance22 ,JMSServer22
    Each JMS server is targeted to the corresponding Instance
    connection factory and Uniform Distributed Queue target my cluster , sub deployment is Default Targetting.
    I have a spring application with has Message Driven Pojo ,which has 4 listener container, each one are configured to connect to one instance
    when I run the application in Tomcat all the consumer are evenly distributed to the instance and Able to receive messages.
    when I try to deploy the same spring application in another weblogic server(different machine and different domain)
    The setup of this server
    DominName : wasdomain Weblogic 10.0
    hmidomain(admin)
    No cluster, I deploy the application in <font face="tahoma,verdana,sans-serif" size="1" color="#000">admin</font> server itself I face the following problem
    <P>1) Consumers get registered but unable to receive messages
    2)If I restart the server, then they are able to receive messages, until I do a update to the application. If I do an update to the project it fails to reload and leads to a server restart.
    Initially I got exception as java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[system, Administrators]
    After adding the security credentials for JNDI template, I don't get this exception but still it does not work.
    the connection and Queue are not secured.
    I am not using any bridge or SAF. but not sure if it has anything to do with Domain security.
    As you might have seen above, that I have unique name for all resources and both the Domains are in same network , no firewalls
    As mention earlier the Spring MDPworks fine in tomcat with out any issue.
    I have not posted any config codes, If you need it, please let me know.
    Any help to fix this issue is appreciated.
    Thank you
    Edited by: Kannan Mugundan on Jan 30, 2010 1:49 AM
    Edited by: Kannan Mugundan on Jan 30, 2010 1:52 AM</P>You can give a more complete description of your needs, It will be better for answering your question.

Maybe you are looking for