Unable to receive messages on a PC but Android Tablet & iPhone OK!

I would please appreciate help with a Thunderbird ver 31.3.0 problem on my two PC's (Windows 8 PRO 64-BIT and Windows 7 PRO 32-BIT) that prevents me from receiving emails dated 18 December 2014 and onwards. Sending is fine. I can though download the same email dated 17 December 2014 but no more.
My Android Asus 7" Tablet and iPhone 4 are both able to receive/send emails and are both connected by wireless to my broadband router, the same one to which my PC's are connected. I have tried wireless on my PC's but still does not work.
Contacted my broadband supplier in the UK (Sky) and went through all the Thunderbird settings which were fine.
I then installed a GMK UK email account and downloaded emails no problem!
My suspicion is therefore that there is some form of problem with Thunderbird/Mozilla's systems but not sure.
Any assistance would be much appreciated.
Thank you.
Robert

What is the account type on both, your tablet and phone - POP or IMAP?

Similar Messages

I receive messages (via Message) on my iPad, but NOT my iPhone. What's happening?

Hi all,
I seem to be able to receive Messages on my iPad, but not my iPhone. My iPad doesn't have cellular service, so I'm assuming that I won't be able to get non-Mac-based messages on it...
Using Verizon.
I have an iPhone 5, it's up-to-date. Is there something in Settings I need to change?
Can anyone help?
Thanks,
Eri

I've removed icons from Multitask bar, both devices are completely powered down and off.
Please tell me why this would help? My iPad was at home, my iPhone with me when I messaged my husband. Receiving no response, I tried again and again and got no answer from him.
I come home and find that his responses are all on the iPad.
But I've never had that problem before!
I have to wait until my spouse sends me a message and see...
Thanks,
Eri
ETA: PS I'm not sure about my iCloud settings.

Weblogic Spring MDP consumer unable to receive message

Hi,
we have a weblogic cluster(2 machine, 2 instance per machine)
I have configured JMS server in each instance and a distributed Queue
DominName : hmidomain Weblogic 10.0MP1
And four instance of managed server and JMS server
gdmsdomain(admin)
instance11,JMSServer11
instance12,JMSServer12
instance21,JMSServer21
instance22 ,JMSServer22
Each JMS server is targeted to the corresponding Instance
connection factory and Uniform Distributed Queue target my cluster , sub deployment is Default Targetting.
I have a spring application with has Message Driven Pojo ,which has 4 listener container, each one are configured to connect to one instance
when I run the application in Tomcat all the consumer are evenly distributed to the instance and Able to receive messages.
when I try to deploy the same spring application in another weblogic server(different machine and different domain)
The setup of this server
DominName : wasdomain Weblogic 10.0
hmidomain(admin)
No cluster, I deploy the application in admin server itself I face the following problem
1) Consumers get registered but unable to receive messages
2)If I restart the server, then they are able to receive messages, until I do a update to the application. If I do an update to the project it fails to reload and leads to a server restart.
Initially I got exception as java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[system, Administrators]
After adding the security credentials for JNDI template, I don't get this exception but still it does not work.
the connection and Queue are not secured.
I am not using any bridge or SAF. but not sure if it has anything to do with Domain security.
As you might have seen above, that I have unique name for all resources and both the Domains are in same network , no firewalls
As mention earlier the Spring MDPworks fine in tomcat with out any issue.
I have not posted any config codes, If you need it, please let me know.
Any help to fix this issue is appreciated.
Thank you
Edited by: Kannan Mugundan on Jan 30, 2010 1:49 AM
Edited by: Kannan Mugundan on Jan 30, 2010 1:52 AM

Kannan Mugundan wrote:
Hi,
we have a weblogic cluster(2 machine, 2 instance per machine)
I have configured JMS server in each instance and a distributed Queue
DominName : hmidomain Weblogic 10.0MP1
And four instance of managed server and JMS server
gdmsdomain(admin)
instance11,JMSServer11
instance12,JMSServer12
instance21,JMSServer21
instance22 ,JMSServer22
Each JMS server is targeted to the corresponding Instance
connection factory and Uniform Distributed Queue target my cluster , sub deployment is Default Targetting.
I have a spring application with has Message Driven Pojo ,which has 4 listener container, each one are configured to connect to one instance
when I run the application in Tomcat all the consumer are evenly distributed to the instance and Able to receive messages.
when I try to deploy the same spring application in another weblogic server(different machine and different domain)
The setup of this server
DominName : wasdomain Weblogic 10.0
hmidomain(admin)
No cluster, I deploy the application in <font face="tahoma,verdana,sans-serif" size="1" color="#000">admin</font> server itself I face the following problem
<P>1) Consumers get registered but unable to receive messages
2)If I restart the server, then they are able to receive messages, until I do a update to the application. If I do an update to the project it fails to reload and leads to a server restart.
Initially I got exception as java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[system, Administrators]
After adding the security credentials for JNDI template, I don't get this exception but still it does not work.
the connection and Queue are not secured.
I am not using any bridge or SAF. but not sure if it has anything to do with Domain security.
As you might have seen above, that I have unique name for all resources and both the Domains are in same network , no firewalls
As mention earlier the Spring MDPworks fine in tomcat with out any issue.
I have not posted any config codes, If you need it, please let me know.
Any help to fix this issue is appreciated.
Thank you
Edited by: Kannan Mugundan on Jan 30, 2010 1:49 AM
Edited by: Kannan Mugundan on Jan 30, 2010 1:52 AM</P>You can give a more complete description of your needs, It will be better for answering your question.

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HT3529 I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field.

I updated to iOS 6 on my iphone 4 and updated my macbook pro with and now my mail is not working at all on my iPhone. I can receive/send on my laptop, but not my iPhone!! Can someone help?

i updated to iOS 6 on my iphone 4 and updated my macbook pro and now my mail is not working at all on my iPhone, whether on wifi or 3G. I can receive/send on my laptop, but not my iPhone!! Can someone help?

Which email provider are you using? If it's Gmail, try unlocking your account here: https://accounts.google.com/DisplayUnlockCaptcha.

BizTalk 2013 SB-Messaging Adapter: Unable to receive messages from a Azure service bus Subscription

Hi,
I am trying to receive messages from a Azure service bus subscription using SB-Messaging Adapter in BizTalk Server 2013 but getting the following error.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
It seems the error is related with Service Bus Authentication and Authorization with the Access Control Service. Can anybody help me out if I am missing something here?
Also for consuming the AWSB (namespace, topic name, subscription name, Issuer name, Issuer Key) I have referred the following link
http://soa-thoughts.blogspot.in/2013/02/biztalk-server-2013-new-adapters-series.html
Thanks!
Regards,
Gautam
gautam

Hi,
When I am trying to receive the same messages from a Azure service bus subscription using .net (C#) client,
BusSubscriberbusSubscriber =
newBusSubscriber("TestTopic2",
"Endpoint=sb://overcasb.servicebus.windows.net/;SharedSecretIssuer=owner;SharedSecretValue=wqYlT4yHZimeUZacH+1V1hj/ZrKu7zK9ELaaLYDxqjc=",
"AssetMovement",
"AssetMovement");
I am getting the same error here also.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
By setting <defaultProxy useDefaultCredentials="true" /> in appconfig, I got rid of the above error. And now its working fine with .net(C#) client.
<configuration>
<system.net>
<defaultProxy useDefaultCredentials="true" />
</system.net>
</configuration>
The same setting I tried in BTSNTSvc.exe config file and ofcourse restarted the host instance but still getting the same error. Any help?
gautam

TS2755 Receiving "Message Send Failure" notification, but messages are going through?

For the past few days, I have been receiving a "Message Send Failure" after every iMessage that I send. The messages are going through, but I still receive the notification every time. I have restarted my phone, signed out of and back into iMessage, and reset my network settings. Nothing seems to be working. Anyone have a solution? I'm having the same problem on my iPad, which leads me to believe it's a problem with iMessage at large as opposed to a device problem. Thanks!

If you have others that are receiving your imessaging but not the group you are attempting to send to then do this:
Click on your text messaging area using imessaging enabled and then type a message to yourself. Do this test to verify that your imessaging apple server is working properly. IF you get the messsage back to you in BLUE this indicates to you that both the outgoing and incoming text messaging is working as imessaging. With this piece of information verified that will indicate there are connectivity issues with individuals or all that are a part of the group you are attempting to contact. Please do not conclude that at a point in time this communication worked via imessaging that there may be some in the group that are now having conectiviity issues of their own.
Good luck, Friend.

How does the ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my ipad but not my iphone. my ipad does not have a data plan so if i'm not on wireless, i don't receive any notifications.

How does the Family Share ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my iPad, but not on my iPhone. My iPad does not have a data plan so if I'm not on wireless, I don't receive any notifications.

Did you ever receive a solution for this issue?

Lync 2013 + Windows 8 phones not getting any notification but android and iphone works fine

Dear All,
Issue : None of the windows 8 phones gets alert when someone pings in lync2013
Description: We get notification when someone pings to lync2013 im configured in android or iphone and it fails to notify when someone pings lync2013 configured in windows phones Example : Lumia 920,930,625
Environment:
Singe FE and Edge
Assessments:
Push notification is enabled in the server side and on mobile
Tried using 2010 version client had the same issue
Push testing was successful until I updated the server and now after update I am getting the following error
PS C:\Users\administrator.tester> Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com -verbos
e
cmdlet Test-CsFederatedPartner at command pipeline position 1
Supply values for the following parameters:
TargetFqdn: edge.tester.com
VERBOSE: Reading access proxy port from topology process started.
VERBOSE: Reading access proxy port '5061' from topology process successfully finished.
VERBOSE: Reading certificate process started.
VERBOSE: Reading certificate process successfully finished.
VERBOSE: Searching for certificate with issuer name = 'CN=test-certsrv-CA, DC=tester, DC=com' and serial number =
'4200000013a701fa4732b0475b000000000013'.
VERBOSE: Successfully found certificate with the matching issuer name and serial number.
VERBOSE: Workflow Instance Id 'd283786a-ba07-42ad-83e2-ad4ed5692597', started.
VERBOSE: Command line executed is 'Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com
-verbose'.
Test-CsFederatedPartner : A 500 (The server encountered an unexpected internal error) response was received from the
network and the operation failed. See the exception details for more information.
At line:1 char:1
+ Test-CsFederatedPartner -Domain push.lync.com -ProxyFqdn sipfed.online.lync.com ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OperationStopped: (:) [Test-CsFederatedPartner], FailureResponseException
    + FullyQualifiedErrorId : WorkflowNotCompleted,Microsoft.Rtc.Management.SyntheticTransactions.TestFederatedPartner
   Cmdlet
VERBOSE: Workflow Instance ID 'd283786a-ba07-42ad-83e2-ad4ed5692597' completed.
VERBOSE: Workflow run-time (sec): 0.1410312.
Please let me know if this is causing the issue,
Please note : As soon as I see this tried invoking the csmanagementstore replication and got to know my edge server is not up to date - I am sure this has no relation with push this is for getting the changes informed to edge server,
Everything works normal with no issues apart from this,
Seeking your valuable advice here,
Thanks
Nelson
Nelson N Exchange 2003|2007|2010

Hi Nelson,
To better understand the issue, I would like to collect the following information.
1. Have you added the new hosting provider, Microsoft Lync Online, and then set up hosting provider federation between your organization and Lync Online ?
Configuring for push notifications in Lync Server 2013
2. Have you installed the new root certificate?
Lync Servers currently use the GTE CyberTrust Global Root and beginning on June 1st, 2013 will migrate to the Baltimore CyberTrust Root. The
migration of Lync Online Service to use the new Baltimore trusted root Certificate Authority is planned during May 2013. As of June 1st 2013,
all of our servers including the Lync Push Notifications Clearing House Service will be on Baltimore certs only. So please ensure that your Lync Server deployments have been updated to trust the Baltimore Root before that.
http://blogs.technet.com/b/lync/archive/2013/05/02/lync-mobile-push-notifications.aspx
In addition, it is recommend to update the Lync servers to the lasted version.
Best regards,
Eric

Unable to receive message from an Asynchronous service - BPEL

Hi
I had developed a simple asynchronous BPEL Composite that takes in two parameters(firstName, lastName) and returns back fullName.
I had used a wait activity(for 30 seconds) in the BPEL , after which the two inputs are concatenated, and returned finally. I could test this successfully thru EM, and check the response in the Flow Trace.
The problem is occuring when I'm using this async service in another BPEL.
In another BPEL(which is synchronous), i wanted to use this service, so I used an invoke activity to invoke it, and receive activity to get the response.
But, I'm not getting the final response. Instead, getting the following error after some time(defenitely longer than 30 seconds which is the wait for the async service. Trace given at last)
I think the problem is with the correlation of the response with the req, but the documentation says correlation is automatically enforced with ws-addressing and no need to correlate seperately. So, I haven't done anything extra for correlation. I tried with both transaction properties of BPEL (required and requiresNew), but none could solve. Please help me in this
I checked the flow trace, and it is stopping after the async service invocation activity.
Here is the BPEL Flow Trace
ReceiveAsyncResp (pending)
Waiting for the expiry time "9/20/12 4:55 PM".
Waiting for "callback" from "FullNameAsyncService". Asynchronous callback.
The transaction was rolled back. The work performed for bpel instance "310002" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message.The transaction was rolled back. The work performed for bpel instance "310002" was rolled back, but the audit trail has been saved for this instance.If this is a sync request, please resubmit the request from the client. If it is an async request, please recover from the recovery console by resubmitting the invoke message
Here is the log message(highlighted for easy readability)
[2012-09-20T16:53:33.718+05:30] [soa_server1] [NOTIFICATION] [] [oracle.integration.platform.blocks.tenant] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [WEBSERVICE_PORT.name: BPELProcessForAsyncUsage_pt] [APP: soa-infra] [composite_name: UsingAsyncService] [J2EE_MODULE.name: fabric] [component_instance_id: 310002] [component_name: BPELProcessForAsyncUsage] [J2EE_APP.name: soa-infra] [WEBSERVICE.name: bpelprocessforasyncusage_client_ep] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] NM or Event does not contain property, apps.context.header or fabric.enterpriseId
[2012-09-20T16:54:19.453+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.delivery] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [WEBSERVICE_PORT.name: BPELProcessForAsyncUsage_pt] [APP: soa-infra] [composite_name: UsingAsyncService] [J2EE_MODULE.name: fabric] [J2EE_APP.name: soa-infra] [WEBSERVICE.name: bpelprocessforasyncusage_client_ep] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] No response found for the reply for conversation id urn:9B8F42F0031511E2BFF01541EF21AC0F
[2012-09-20T16:54:19.812+05:30] [soa_server1] [NOTIFICATION] [] [oracle.wsm.agent.WSMAgent] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [WEBSERVICE_PORT.name: BPELProcessForAsyncUsage_pt] [APP: soa-infra] [composite_name: UsingAsyncService] [J2EE_MODULE.name: fabric] [J2EE_APP.name: soa-infra] [WEBSERVICE.name: bpelprocessforasyncusage_client_ep] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] Message Type is normalized, exiting agent.processFault()
[2012-09-20T16:54:19.812+05:30] [soa_server1] [NOTIFICATION] [] [oracle.wsm.agent.WSMAgent] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [WEBSERVICE_PORT.name: BPELProcessForAsyncUsage_pt] [APP: soa-infra] [composite_name: UsingAsyncService] [J2EE_MODULE.name: fabric] [J2EE_APP.name: soa-infra] [WEBSERVICE.name: bpelprocessforasyncusage_client_ep] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] Message Type is normalized, exiting agent.processFault()
[2012-09-20T16:54:19.812+05:30] [soa_server1] [NOTIFICATION] [] [oracle.integration.platform.blocks.tenant] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [WEBSERVICE_PORT.name: BPELProcessForAsyncUsage_pt] [APP: soa-infra] [composite_name: UsingAsyncService] [J2EE_MODULE.name: fabric] [J2EE_APP.name: soa-infra] [WEBSERVICE.name: bpelprocessforasyncusage_client_ep] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] NM or Event does not contain property, apps.context.header or fabric.enterpriseId
[2012-09-20T16:54:20.312+05:30] [soa_server1] [ERROR] [OWS-04086] [oracle.webservices.service] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [APP: soa-infra] [composite_name: UsingAsyncService] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] javax.xml.rpc.soap.SOAPFaultException: *Waiting for response has timed out. The conversation id is null. Please check the process instance for detail.[[*
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.generateSoapFaultException(WebServiceEntryBindingComponent.java:1193)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:971)
     at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1112)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
[2012-09-20T16:54:20.421+05:30] [soa_server1] [ERROR] [OWS-04115] [oracle.webservices.service] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0:2] [APP: soa-infra] [composite_name: UsingAsyncService] [TARGET: /Farm_soa_domain/soa_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: Waiting for response has timed out. The conversation id is null. Please check the process instance for detail..
[2012-09-20T16:54:20.500+05:30] [AdminServer] [ERROR] [] [oracle.webservices.jaxws] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0] [APP: em] [TARGET: /Farm_soa_domain/soa_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Error while invoking endpoint "http://ravi:8001/soa-infra/services/Partition4MrPai/UsingAsyncService/bpelprocessforasyncusage_client_ep" from client; Security Subject: Administrators
[2012-09-20T16:54:20.531+05:30] [AdminServer] [NOTIFICATION] [] [oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0] [APP: em] [TARGET: /Farm_soa_domain/soa_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Dispatch.invoke failed.Exception stack trace written to trace file.
[2012-09-20T16:54:20.578+05:30] [AdminServer] [ERROR] [EM-00453] [oracle.sysman.emas.model.wsmgt.WSTestModel] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0] [APP: em] [TARGET: /Farm_soa_domain/soa_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Failed to invoke operation
[2012-09-20T16:54:20.578+05:30] [AdminServer] [ERROR] [EM-00453] [oracle.sysman.emas.view.wsmgt.WSView] [host: rsavirig-idc] [nwaddr: 10.10.10.10] [tid: [ACTIVE].ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 3f3d2d8955322f32:3a1f20bc:139e2cf6c4c:-8000-0000000000000280,0] [APP: em] [TARGET: /Farm_soa_domain/soa_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Failed to invoke operation

RaviKiran,
I agree that the explanation oracle provided in the attach link, is a bit confusing. The main goal there is to describe the behavior of processes, when there is a need to combine, or split the transactions within those processes (or in some cases the processes themselves).
The thing is - The default transaction for a synchronous process is requiresNew. That was until version 11.1.1.6. On this last version, you are asking to enter a Transaction parameter when creating a new synchronous bpel process. The default value being prompt is required and that's what causing the problem – You automatically accept the default.
The assumption is, that developing bpel processes, should come with understanding of all those behaviors.
The problem for my understanding is that some of those behaviors were not so cleared until now.
Arik

Receive message to "get iTunesU" but it is already installed

Hi,
I am an instructor for several private courses on iTunesU.
When I send the enroll code to my students to enroll in a course, a couple of my students receive a message on their iOS device ti "Get iTunesU". But the app is already installed.
Any suggestions?

With my most recent update of Flash on 12/8/2014 I am having the same problem, but the Shockwave Flash Add-On is set to "always activate."
Firefox 34.0
Shockwave Flash Add-On 15.0.0.239

Getting IFS Error 40014 Unable to receive message over channel

When we try to start our 9.0.3 IFS Node from the Oracle Enterprise Manager we get IFS-40014 errors. This keeps all of our Servers (Agents) from running.
Can someone tell me what is causing this and what we need to do to fix it?
Thanks,
Joe

RaviKiran,
I agree that the explanation oracle provided in the attach link, is a bit confusing. The main goal there is to describe the behavior of processes, when there is a need to combine, or split the transactions within those processes (or in some cases the processes themselves).
The thing is - The default transaction for a synchronous process is requiresNew. That was until version 11.1.1.6. On this last version, you are asking to enter a Transaction parameter when creating a new synchronous bpel process. The default value being prompt is required and that's what causing the problem – You automatically accept the default.
The assumption is, that developing bpel processes, should come with understanding of all those behaviors.
The problem for my understanding is that some of those behaviors were not so cleared until now.
Arik

I'm receiving iMessages on my ipad but not my iPhone 4S.

I've had my iPhone and iPad for well over a year now and never any problems. All of a sudden I've stopped receiving iMessages on my iPhone but I am receiving them on my ipad - slightly annoying as I don't tend to carry my iPad around!
Has anyone got any ideas?

Go to settings and message and see what is showing in there.
If it all looks OK then click on send & receive then the Apple ID and sign out. Then sign in again with your Apple ID and password and see if this solves it.
If it says waiting for activation or anything else, go to settings > phone and make sure the telephone number in there is correct.

HT1688 cant receive messages to my galaxy s3 from other iphone users

How do you deactivate this imessage thing so that all iphone users can send messages to my new galaxy s3... I hate to ask them to deactivate on their end.. there has to be a better solution. Any help?? please

Do you still have access to the iPhone or iOS device you were using with iMessage?
Settings > Messages > iMessage > Toggle Off
Hope that helps

Unable to receive messages on a PC but Android Tablet & iPhone OK!

Similar Messages

Maybe you are looking for