Unable to receive the vociemail in the inbox

Hi,
When I try to access the voicemail box of a user then the message is played "The Message server is offline.You can play the voice message you have received during outage.After the outage you will be able to access all the messages" then I am able to listen to the vociemails left so far but these voicemails are not getting delivered in the mailbox of the user.
I am using
Cisco Unity 7.0 (Unified Messaging without failover)
Microsoft Exchange 2007
Please advise me how should I proceed to fix the problem.
Regards
Amit

There have been some issues where Unity falsely detects Exchange being offline.A change was made in and after 7.0.2ES21 to change how we determine if the store is on or offline. This came out of CSCsx59710.
The following has been recommended:
Upgrade to the latest ES.
Change the "Startup Type" of AvMMProxySvr from "Automatic" to "Manual".
Make sure that "HKEY_LOCAL_MACHINE\SOFTWARE\Active Voice\AvWM\1.00\Check Level" is set to 0xF0.
Reboot.
So I suggest checking these things.
The issue can also be related to permissions. You might either run permission wizard again or run the latest permission wizard in reporting mode to determine if it reports any permission related issues.
Thanks,
Scott

Similar Messages

  • Unable to Receive the Purchase Order

    Hi Experts,
    A PO is created with 44 units of a material. the 44 units are divided into 4 batches.When  trying to do the goods receipt, it id not first prompt for any serial numbers.
    Hence went ahead and did the goods receipt. But could not receive the PO yet.So cancelled the Goods receipt by doing the movement type 102.
    When it was checked, the material in sending plant has a serial number profile assigned to it
    and also the batch management has been checked.(in mm03) . So assigned the serial number profile in the receing plant too.
    but it did not help.
    can you suggest any possible solution for this?

    I did not understand your story.
    And I do not really know how you want it to be.
    you are talking about sending plant and receiving plant, is your PO a stock transport order or just a standard PO?
    do you use SD shipping or just MM movements to transfer the quantity between both plants?
    do both plants belong to the same company or different companies?
    you are talking about batches. batch managment can be activated at plant, mateial or client level, which level do you use?
    if plant level, then the same material can be batch managed in one plant but not batch managed in the other plant.
    you said you did the receipt, but did not receive the PO, then cancelled the receipt. this is a real weird sentence. Has this anything to do with your problem?
    you are saying you are unable to receive the PO, I guess you talk about the quantity and a receipt in reference to the PO. Do you get any error message which prevents you from receiving.
    you actually said you have done the recipt and cancelled it, so what do you mean by "unable to Receive" ?

  • Unable to Receive the File into Target Directory Using FTP

    Hi All,
    Here I Did Simple File-File Scenario With FTP.
    Iam Able to Pick the File From the FTP Location And File has been Deleted From Source Location ( Set the Processing Mode as Delete ).
    Unable to See the Pipeline Steps in Moni, But Able to Se the Success Message With the Inbound Payload only.
    Also chked with the comm. channel of sender and receiver, where the sender shows the message process details but not the receiver comm. channel.
    Regards
    Giri

    You Did the right thing in communication channel that u selected the IS.
    Hi
    Just check out if you sending the correct parameters and also check out the payload you sending and check out in SXMB_MONI for you message that after success wat is the payload and match with your input.
    Rather, for input check, In IR, get the XML data from ur Message Mapping and then save it to your inbox that is input directory.
    Also check out the permission of Output directory and also check the configuration of sender and reciver communication channel.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Unable to receive the IDoc sent in the recipient system

    Hi All,
    We have written a custom program to trigger outbound IDoc using Master_Idoc_distribute, it shows Idoc with success 03 status.
    But an IDoc has not been received at the recipient system end and it shows a message com.sap.mw.jco.JCO$AbapException: (126) NOT_FOUND: NOT_FOUND. We find the system pointing to this same message at SM58 transaction, function module IDOC_INBOUND_ASYNCHRONOUS
    The basic config have been done in these transactions WE31, WE30, WE81, WE82, BD69, WE20.
    Kindly suggest what is missing.
    Is there any other FM which needs to be called after Master_Idoc_distribute
    Regards,
    Priya

    There have been some issues where Unity falsely detects Exchange being offline.A change was made in and after 7.0.2ES21 to change how we determine if the store is on or offline. This came out of CSCsx59710.
    The following has been recommended:
    Upgrade to the latest ES.
    Change the "Startup Type" of AvMMProxySvr from "Automatic" to "Manual".
    Make sure that "HKEY_LOCAL_MACHINE\SOFTWARE\Active Voice\AvWM\1.00\Check Level" is set to 0xF0.
    Reboot.
    So I suggest checking these things.
    The issue can also be related to permissions. You might either run permission wizard again or run the latest permission wizard in reporting mode to determine if it reports any permission related issues.
    Thanks,
    Scott

  • HT5577 Unable to receive the verivication email from Apple

    Hello, I have try to create a apple id, and using the procedure I must receive a verification email. So far I don't receive anything. The same problem has another friend of me. Does anyone know what happened, and don't receive this email?

    You can get another verification email sent out by going to id.apple.com and logging in using Manage Apple ID.  The button will be on the first page just under your primary email.
    If you still don't receive it, the email may be linked to another Apple ID already.  Check any other IDs that you know of belonging to friends or family.  Your email could be linked as a secondary or rescue email.  If so, remove it and request the verification email from your account again.
    If the prior steps still do not get the email to you, call Apple directly and ask for Account Security.  They can usually force the email to be sent if they can verify your identity as the account owner.  The verification is usually just answering your security questions, giving details about the credit card linked to the account, or confirming a code sent out to your devices.
    Good luck!

  • My hotmail is unable to receive the iCloud activation mail and I cannot verify my hotmail address within the Apple ID homepage.  Any way to resolve this?  Any help appreciated

    I have a hotmail address set up as a primary account in my Apple ID homepage only.
    Any way to resolve this?  Any help appreciated

    The email address that forms the username for your AppleID is irrelevant. It does not have to be accurate, working, or even in use by you. Software purchased with a specific AppleID must use that ID to update that software.
    I don't know what happens when you change the old username for the AppleID.
    Did you change the user name for th AppleID or did you get a new AppleID with your new email?

  • I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

    I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
    The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
    I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
    This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
    For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
    Is anyone else having this issue?
    I will soon loose my patience....
    I have reset my phone three time and have reset network and other setting mutltiple times.

  • I am suddenly unable to receive calls on my iPhone 4S.  Is it possible that the age of the phone will affect its ability to receive calls? HELP!

    I am suddenly unable to receive calls on my iPhone 4S. 
    I have spent 2 hour-long sessions with technical support and although they were very nice, it is still not fixed.
    When I try to call the phone from a land line, it doesn't ring AND it doesn't recognize that a call is coming in (no missed call) BUT if I leave a message, it records it.
    Is it possible that the age of the phone will affect its ability to receive calls?
    HELP!

        MarketingMary,
    I am truly sorry to hear that your are unable to receive calls on your device. Thank you tbo27 for providing great troubleshooting steps. Making sure call forwarding is not active by dial *73 is great. Have you already reset network settings also? http://vz.to/RTz70g Are you able to make calls fine? Make sure Do not Disturb is not active. Settings>Do Not Disturb
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    Which version of OSX and what email provider are you using.

  • I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

    I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

    Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

  • HT4528 i upgraded from an iphone to a Samsung galaxy and now i am unable to receive text messages now from iphone users.the iphones think that my number is still another iphone and always sends a message as imessage.

    Upgraded from iphone to a Samsung and now i am unable to receive text messages from other iphone users unless they disable imessage .
    Being my original number was on an iphone is why this is happening .
    Please help. Almost everyone has an iphone

    You should have turned iMessage off before disabling the phone. Do you still have the phone so you can turn iMessage off? If not, you will need to go to Apple support on their website and delete the product from your profile.

  • After a failed itunes update I attempted to open itunes and received a message "unable to locate component MSVCR80.clll, as well as an error message "Error 7 (Windows error 126).  I was told to reinstall itunes, which I did, then received the same message

    I have an itunes account on a pc running Windows Vista.  After a failed update I can no longer open my itunes account.  I receive 2 messages.  The first says "unable to locate component MSVCR80.clll".  Ther other is an error message which says "Error 7 (Windows error 126).  It was suggested that reinstalling itunes might solve the problem.  After doing so I receive the same messages.  What now?

    isarver wrote:
    What are the other components to uninstall besides the itunes program?
    thanks.
    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

    This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
    So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
    Please guide me how I can achieve this requirement.

    Hi,
    yes, it is a little bit different. This is the issue.....  
    But I am not sure if your links will help:
    1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
    is about a different solution. I do not need to count the number of lines of the source message.
    And the second variable is about concat line by line from unbound node to unbound node.
    My issue is:
    Souce:
    Message line (0...unbound) ! ! ! ! ! ! ! !
    .    ResultLine   (1..1)
    Mapping:
    =>   ResultLine1
           ResultLine2
           ResultLine........          => into UDF to an element  (1..1) in one mapping operation.
    So that all "ResultLine"s are included.
    The result is explained in the given link for Mail attachment with UDF.
    So I am not sure how to use this thread for my issue.
    In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
    So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
    2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
    shows where to find the button "Java section" which is not available here in 7.1
    3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
    too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.  
    So my issue is: How to replace the Java section function with global variables in PI 7.1?
    Best regards
    Dirk

  • Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

    Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).  I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue.  I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support.  This also has not resolved the issue.
    When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.”  Verify you have sufficient privileges to start system services.  I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

Maybe you are looking for