Unable to recognize document as valid XSDCheck the selected category

w.r.t the thread below, any solution expert..
Unable to convert imported document to WSDL --- PI 7.1
in Pi 7.0 XSD is working perfectly... in XML spy its not showing any error. but when i want to upload in 7.1 its giving errror like
Unable to convert imported document to WSDL
Reason:
Unable to recognize document as valid XSDCheck the selected category
what change i should make in the xsd... so that it can be imported in 7.1

Hi
What you can do is (in XML Spy) generate a sample XML file from your schema. Make sure you tick of for "Generate all elements".
From the sample XML file that you get, generate a schema (Generate DTD/Schema). This new schema will be different to the one you have, but importing it in PI should work.
When you use it in your message mapping, just make sure that you choose the correct field as the top node and also check that all fields are there (they were in my case and worked as a glove..:).
regards Ole

Similar Messages

Preview is opening unselected documents in addition to the selected one.

Preview is opening unselected documents in addition to the selected one. Recently upgraded to Mountain Lion. Tried tweaking the Preferences, but no effect.

This is part of the resume feature of Preview, similar to Safari opening the last viewed pages when reopened. There are several methods to avoid this behavior. Clicking the red dot in the upper left corner before quitting Preview is one method. Also, clicking on the Preview menu, press and hold the option key, and then choose Quit and Close All Windows, A third method is to choose Close Window from the File menu on the document before closing Preview.

This Certificate not valid for the selected purpose

I have installed on my Windows 7 (64 bit Professional w/SP1)
a Self-Signed CA (IDS_MstrCert)  that has been accepted by the system certificate "store". via mmc & certmgr
I generated this CA on my Redhat Linux 7 server using the openssl utilities.
It shows: This certificate is intended for the following purpose(s):
All issuance policies
All application policies
It is enabled for ALL purposes (However I did not generate with ALL purpose set)
Under Certification Path:
Certificate Status: This Certificate is OK
I have also installed a Client Certificate (winxclient) (also generated by my Redhat Linux 7 server)
That has been "signed" by my CA (IDS_MstrCert)
I added it successfully to the system certificate "store" via mmc & certmgr.
However when I open the certificate I see the following message: This Certificate not valid for the selected purpose
When I view the Certificate path I see the following:
IDS_CA                          (friendly name for the CA)
    |-----> VPNIKEv2cli     (friendly name for the client certificate)
    Certificate Status: This certificate is OK
In the Intended Purposes field: ServerAuthentication, ClientAuthentication
How do I resolve this problem ? This Certificate not valid for the selected purpose
When I attempt my vpn/ikev2 connection (using machine certificates) I get the 13806 error.
Best Regards
Guy Rich

Hi,
In my opinion, this is not Windows system problem. You need to make troubleshoot with the Certificate.
I made a research with this error message, the link below might be helpful:
http://support.persits.com/show.asp?code=PS030304105
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

Hi,
I am need of help! I have had this issue for a while now and it's becoming frustrating.
My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
Someone please help me fix this problem.
Many thanks.
Matt.

Hi
So just close iTunes and re-open iTunes thats it and that worked for you?
When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
Thanks.

After creating a searchable database I am unable to search documents based off of the bates number.

I just finished creating a searchable database in Adobe Acrobat Pro and it finds documents based off of search terms fine. It does not however locate documents based off of the Bates number that I am using as a search term. Why won't it let me do this?

Hi Dodu.NET,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
In addition you cna try these steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.

Validation for the select option value range of selection screen

Hi All.
if i wish to validate the selection screen parameter for a value range(select options),is it possible?
what should i write in code.Also,m using FM DD_DOMVALUES_GET to get the values for a specific domain name.
Please reply.

Hiii,
Yes it is possible.... Can you give me the piece of code ... about the select option
and also the value range against which you want to validate the select option.
So that i can help you with the coding tips...
Thanks in advance..

Date validation in the selection screen

Hi
I am new to all this..so pls help me with this...
I need to validate my input field in the selection screen to have the format as YYYYMMDD i.e user is allowed to enter the date in this format only!!
Now how to validate this kind of a format??

Hi
That's INPUT format just one used to save a date, so u need to check it only.
It's the same if you used a DATS format, because its INPUT FORMAT is the same, for example, output format of SY-DATUM is DD.MM.YYYY, but input format is YYYYMMDD, so:
PARAMATERS: P_DATE LIKE SY-DATUM.
AT SELECTION-SCREEN.
IF P_DATE < SY-DATUM.
MESSAGE E208(00) 'Error'.
ENDIF.
In your case the INPUT and OUTPUT format are the same so:
PARAMATERS: P_DATE(8) TYPE N.
AT SELECTION-SCREEN.
IF P_DATE < SY-DATUM.
MESSAGE E208(00) 'Error'.
ENDIF.
Max

SharePoint Online IE 11 Unable to View Document Library

I have a user that is using Windows 7 and IE 11. Whenever they open any sharepoint site, they are unable to view documents. They see the webpart title, but nothing underneath. I know this happens with the "Links" list as well as document libraries.
Newsfeeds work fine.
I have tried compatibility view, deleting cache, cookies, history, restoring advanced settings, and resetting the browser. None of these things work. I know it is not a permissions issue because I am able to log in as the user and I am able to see everything.
Any ideas?

There's conflicting ideas on this. WebDAV handles explorer views on the server side. SharePoint used to (don't know if it still does) have it's own built in version of that. But when it's asking for username/password, that sounds to me
like an ISS authentication issue, or a permissions issue. Since you probably own it, I doubt permissions is the problem.
For an overview
http://support.sherweb.com/Faqs/Show/how-to-connect-to-a-sharepoint-site-using-webdav-sharepoint-2013
Take a look at this for solutions:
http://sharepointinterface.com/tag/webdav/

Is it possible to edit (levels, curves, exposure, saturation, etc.) a selected area of a photo (using quick selection, magnetic lasso, etc.) without moving the selected section to another document and editing it there?

I'm trying to edit a portion of a photo of a lake so that the rays of sunlight (the lines that run across the sky) are more prominent, without darkening the rest of the photo. I've sucessfully selected, removed, and edited the sky in the photo (the part that I want to enhance the sun rays on), but I can't figure out how to get that piece (currently it's own document) back onto the original jpeg document. I took the selection from the Background copy if that is of any help to figuring this out.

Another way in photoshop is to make a Group above the photo. add a layer mask using the selection and put the adjustment layers in the group
There is also a forum for the full version of photoshop:
Photoshop General Discussion

Is there any event listener for changing the selection of layer?

Hi all,
I am looking into an event listener which fires on changing the selection of layer. I found 'Select' event listener which fires on selecting the different object.
Actually the problem with Select event listener is that when we select an object and move it and deselect it by clicking on the document, event fires on the selection of that object. But if we again select the same object and move it, no event is fired at that time.
Is there any workaround of this? So that the event is fired every time when we select the same object.
Please help me on this..
Regards,
VG.

Thanks for the reply..
Actually I want the same behaviour as in illustrator i.e
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier calls the listener again)
- Move it.
But in photoshop,
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier doesnot calls the listener again as the layer is already selected in panel as you explained.)
- Move it.
Is there any way to get the same behaviour of illustrator in photoshop?

Selection order to follow the select-option order rather than numerical ord

Hi Gurus!
I have created a program to print Form headers. The program selects the documents from nast table based on the document numbers eneterd in selection screen. When I eneter for example documents :
10000007
10000005
10000001
10000002
10000004 and run the program it prints the headers in sequential order rather than the order I put the documents numbers in selection screen.
It prints
10000001
10000002
10000004
10000005
10000007.
Is there by any chnace a way that I can print it exactly in the same order as the documents are entered in the selection screen?
Thanks. Help will be greatly appreciated.

Yes, I agree. But my suggestion was to display or call the Form FM within the Select-options loop and Read Nast internal table for details. Hope you have restricted the Select options to restrict the entries only for "=" with no extension.
Loop at S_SELOPT.
     Read table GT_NAST into GS_NAST with key OBJKY = S_SELOPT-LOW.
     If Sy-Subrc eq 0.
..... your existing logic to display the form....
     endif.
Endloop.

When syncing, what does the 'Other' category refers to?

I sync my iPad to a computer originally. Now that I've purchased another computer I'm trying to sync to it but I'm unable to determine had to make sure the 'other' category is not lost during the transfer. Any help would be appreciated.

Don't sweat it. "Other" is primarily the Operating System (IOS).

"The Selection is not within a valid module" - unable to run on server

Hi,
I have WLP 10.2 portal web and ear projects, but for some reason I am unable to run on server the .portal files or any other resources within the project.
When I try to run I get the error - The selection is not within a valid module. Does anyone have any idea in what scenarios this might happen?
Thanks,
Sid

never faced this before but came across this eclipse bug
http://dev.eclipse.org/newslists/news.eclipse.webtools/msg13972.html
'The current handling of project modules is such that the project name must match the deploy-name in the .settings/org.eclipse.wst.common.component for "everything" to work correctly. If they don't match, I believe the symptom you are experiencing is one of the "things" that goes wrong.'

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Unable to open document. Please check to see if you have read permission for the above file.

System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
B

I think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

Unable to recognize document as valid XSDCheck the selected category

Similar Messages

Maybe you are looking for