Unable to record a trasaction.

Hi,
While recording the transaction abt1n usig SHDB, after the save button is pressed.The recording stops and doesnt capture the next pop up screen.
so how can we capture the pop up screen after the activate or the save button is pressed.
Regards,
Pooja

ABTN1 is an enjoy transaction, but ABTN is not but still same problem exists. Do let me know what is enjoy transactions?
BDC not prefer for enjoy transactions'.
infact they have better graphics and ALV tree and all additional functionality but less promising while background processing cause they are dynamic and not able to comunicate with frontend files.
so ignore As much as possible with enjoy transactions.
Amit.

Similar Messages

Camcorder video error: "Unable to record. Resolution not supported by memory card."

We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem? I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

Unable to record on my Thin Client on WMS 2012.

I really need help here, I have up to 65 thin clients and 4 vm running WMS 2012 on WS 2008 R2 and they are all licensed. The issue is this, on the clients, i am unable to record. Its not detecting the Headphones mic, but it could speak out with the headphone-speaker
and i am confused right now. I need help. May God bless every one reading and replying this to help me solve this issue.Amen.Thanks

Hi Philippe,
I really appreciate your effort. I don't understand the gear in your response saying with certified driver and such and using the same gear with a windows laptop/com... to rule out the thin client firmware, Please can you explain a little bit with
basics. For the firmware update i will try it in one of it. Thanks, will be expecting a feedback from you and anyone else can also comment. I want to be sure of the firmware thin before making any changes because when doing any firmware upgrade/update, someone
needs to be careful.
Regards,
Kunle.

I am unable to record myself on ipad touch ?

I am unable to record my speech on the ipod touch?

What happens when you try?
- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. A few other users have reported problems with their mic not working on thier 5G due to a hardware problem.
Apple Retail Store - Genius Bar

I just purchased iPhone 5S and I am unable to record my custom greeting. It seems like it is recording but when I play it cuts off after "hello"

I just purchased iPhone 5S and I am unable to record my custom greeting. It seems like it is recording but when I tried to play it back it just plays "hello" and that is it.

Hacking an iPhone is against's Apple license agreement for the iPhone and is not supported by Apple directly or indirectly via these discussions not to mention removes the built-in security included with iOS and has likely bricked your iPhone now.
Contact whoever you downloaded that hacking garbage from for help with this.

Quicktime player x unable to record

Unable to record in Quicktime Player X, 10.8.4- QT will open, even play movies, but when the record window comes up, clicking on it will not start a recording, but switch to another open application, whatever is behind it, like the Finder, or Safari, etc. I wish I could take a screen recording of this error....

Mine also won't work, but what it does is freeze for a little, then act like it's recording for 10 seconds, then give me an error:
Console says:
2/4/14 4:53:40.630 PM QuickTime Player[36282]: Tue Feb 4 16:53:40 2014 CMIO_Unit_Input_ASC.cpp:3812:CGGrabThreadHandler signalling end of data because the CG grab failed for 10 seconds, which usually means the display went to sleep (graphics error status -67394)
2/4/14 4:53:41.318 PM QuickTime Player[36282]: -[MGScreenRecordingDocument discardEditing]: unrecognized selector sent to instance 0x7f8d8ac46d20
2/4/14 4:53:41.319 PM QuickTime Player[36282]: -[MGScreenRecordingDocument discardEditing]: unrecognized selector sent to instance 0x7f8d8ac46d20
2/4/14 4:53:41.432 PM QuickTime Player[36282]: (an unrecognized selector exception)
2/4/14 4:53:41.469 PM com.apple.security.pboxd[36289]: CGSGetWindowTags: Invalid window 0x150c
2/4/14 4:53:41.469 PM com.apple.security.pboxd[36289]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
2/4/14 4:53:41.470 PM librariand[366]: client process 36282 does not have a valid com.apple.developer.ubiquity-container-identifiers entitlement
2/4/14 4:53:41.471 PM librariand[366]: error in handle_container_path_request: LibrarianErrorDomain/9/The client process does not have a valid com.apple.developer.ubiquity-container-identifiers entitlement
2/4/14 4:53:44.404 PM com.apple.security.pboxd[36289]: CGSReleaseWindow: Invalid window 5388
2/4/14 4:53:44.404 PM com.apple.security.pboxd[36289]: _NXTermWindow: error releasing window (1000)

Unable to record Windows Explorer

I am creating my first ever project in Adobe Captivate 3. Is there a know issue with not being able to record anything within Windows Explorer or is it something that I am doing wrong?
Anyone know how to get round this?

Hi there
When you say "unable to record" that may mean several things.
Are you expecting Captivate to automatically record and it isn't?
Is Captivate listing any sort of error?
What exactly is happening?
Captivate does an amazing job with what it does. But in some cases it is unable to sense things. For example, you may be using Windows Explorer, but what is being presented that you are trying to record? Maybe Captivate just doesn't understand it.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Unable to record voicemail message, no action when red button pressed

Have used Skype for years but now about to give it up as unable to record voicemail greeting or receive voicemails consistently. I have received one voicemail from aobut 30 calls. I am unable to understand or replicate what went right in the successful exception. I go to Mac > Skyp > Preferences > Calls Set up voicemail. It's set up. I got to record with red button. It's clickable but no recording occurs and nothing to play back. Sound preferences are set to use internal iMac mike to record. I'm at divine unknowing. Anyone have useful experience or ideas?

Hi, Did you call 'Echo/Sound Test Service' for ensuring that your audio settings are configured correctly for Skype ? Here's == how to set up a personal voice message. == Hth

Unable to record just audio with Mac Mini - no isight

I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an audio only podcast. I have a microphone plugged into the line in and it works successfully in Garageband. Please help!

Take a look at Soundflower, which will allow you to record audio from any source:
http://soundflower.en.softonic.com/mac
http://www.macworld.com/article/1159440/soundflower_capture.html

I am unable to record using vista

I used to be able to use the recording icon on my Creative Media Source Organizer for my Zen V Plus. But now after I installed it on my vista, I am unable to use it. Each time I click on the record icon it says "The selected recording device cannot be used." It will not let me Select Recording source either. And when I click on the Enable Monitor icon as well it gives me the same warning.
I would like to know if it is my Organizer or my Vista which is causing this problem.
Once before my vista forced me to download a free licsence in order to play a song I had on a burned CD.
The song was from a CD I owned like all the other songs.. But for some reason my Vista made me go through all that trouble even though on my other computer I didnt need to. I don't know if that has anything to do with this situation but I thought it might help.
And I'm hoping that some people here would be able to help me as awell
Thank You.

I used to be able to use the recording icon on my Creative Media Source Organizer for my Zen V Plus. But now after I installed it on my vista, I am unable to use it. Each time I click on the record icon it says "The selected recording device cannot be used." It will not let me Select Recording source either. And when I click on the Enable Monitor icon as well it gives me the same warning.
Try to change the recording source
Select Control Panel, and then Hardware and Sound.
Click on the Recording tab.
Select the recording source for example, Line In 2/Mic 2, and then click Set Default. Recording device will be marked with a green tick mark.
Message Edited by Rad-Wulf on 03-26-2008 09:42 AM

Captivate file suddenly unable to record/import/copy and paste - shuts down with error message.

Hi
I have a project with lots of recording and I am now unable to do any of the following. Suddenly when I try to:
add a new recording slide
import a recording slide from another file (one by one)
copy and paste a recording slide from another file
Captivate freezes and shuts down because it incorporated an error. Then it tells me that another instance of captivate is recording and to shut it down when I re-open it and try to record again. (there isn't another open)
I have tried:
opening it and renaming it and shrinking the file size, but if I need to do one more recording it freezes on the new file.
opening a new file and recording. this works, but the problem is that I cannot import or paste the other slides from the original file into the new file to make it complete. I also cannot import this new recording into my original file to make it complete.
opening the backup and trying to import or record.
saving it under a new name and trying to import or record.
Any sugestions?

Hi there
Isn't this the second time you have posted the same issue? First you appended your issue onto an existing thread. This thread is new.
I've deleted your original post where you appended leaving this thread to collect responses. Per the forum guidelines at the link below, please ask your question once in a single thread.
Click here to view
Thanks... Rick

Unable to record, access planner, pause or rewind

Yesterday I was unable to watch anything at all on sky tv. Today it has come back on and I can't access my planner or pause, rewind or fast-forward anything at all. I rang sky who talked me a through a rebuild. This did not work so said I could try resetting the whole thing if I wanted which would result in losing all my recordings. I asked what other options I had and he said never use the recording feature again. As this is not really a realistic option I performed the system reset as instructed. This also made no difference and was told I would have to pay for an engineer to come out. I was also told there was no compensation for loss of services while I wait for an engineer as it is a fault with the box not the sky service. Is this correct? And is this my only option? And does it seems right that the box would just stop working like this? I have only had it for 15 months. Thanks

The one other thing you could try is to force a software refresh. To do this, switch the box off at the plug and wait 5 minutes. Then press and hold the backup button on top of the box (not the remote) while switching on again. Keep the button pressed until all 4 LEDs light on the front panel, then follow the on screen instructions.
If that doesn't help, the most likely cause is a prematurely failed hard drive. Another possibility is that the box has overheated if it is placed in a position where it doesn't get sufficient ventilation.
I'm not sure the adviser was correct concerning a service rebate. I'd give Sky a call again once the engineer has fixed the problem. I would have thought you should be eligible for a pro rata refund of your subscription from the time you reported the fault to the time it's fixed.

Unable to record audio for Voice Over from camera

Hi All:
I have an early 2008 black macbook, FCE4 and a canon HV 30 with an xlr adapter and mic. Imported all my footage just fine. Now I want to record a voiceover track using my nice mic through the camera. I plug in the camera to the computer via firewire. When I go to Voice Over Tool and try to select DV Audio, it tells me this:
"The Selected sound input device is unavailable.
It may be in use by another application, disconnected or improperly connected, or may be conflicting with a video output device."
Uh, okay. I check the manual, it warns me that "External Video" under the View menu must be to OFF. Problem is, there is NO "External Video" option whatsoever in the View menu! None! Whatsoever!
My firewire port is functioning, the computer knows there's a camera attached to it (I checked the Hardware overview, and surely enough the computer detects the camera)...
What am I doing wrong?

I have Built-In Microphone, Built-In Input and DV Audio as source options...but I only get the above-mentioned error message when I select DV Audio. Even when I don't have the firewire & camera connected, I get that same error message when I select DV Audio...which makes me think that the computer doesn't detect the camera, but I know it does because the computer detects a Canon HV 30 in System Profiler (and I can capture w/o a problem...I just click Capture and press escape when the tape end is reached).
And what I meant earlier about capturing is that a window does pop up whenever I'm capturing from my camera and it shows the footage during capture, but the computer does not automatically respond to just my plugging the firewire cable in (idk if it's supposed to recognize it and ask me if I want to capture or not, but it doesn't...I have to prompt it to capture)
I'm also puzzled that I don't have an External Monitor option under View...I'm not using an external monitor, and the only thing close to External Monitor under the View menu is Video Out, under which there are: Refresh Video Devices, Toggle Last, Canvas Playback & Digital Cinema Desktop Preview - Main.

Unable to record audio

I am trying to record audio into Logic through a electro-acoustic guitar and AKG microphone, which are both plugged into my Saffire 6 interface. Everytime I set up a new audio track and select the 'R' record button, a loud static noise plays through my monitors. You can see that the interface is picking up a signal from the guitar but all you can hear is the static.
When I increase the gain on the instrument channel on my interface, the noise stays at the same level. But when I increase the volume of the monitors or the volume of the mixer channel in Logic the noise gets louder. This makes me think that all the cables are fine but it is something to do with a setting in Logic.
The mixer channel in logic always looks like this when audio recording is enabled:
I've read on some other forums that it might be to do with the buffer size - I've tried changing this but the problem seems to persist. I also read that it might have something to do with setting the midi clocks in the synchronization tab but there wasn't enough information explaining how to do this.
My midi setup currently looks like this:
I've had this problem for ages now and can't find a way around it....

Couple of more questions:
Does the Focusrite have a feature called zero latency monitoring, also called direct monitoring? If so make sure it is turned off and not used. The Saffire has a "Mixer" knob, do you have that in the correct position. Do you have the latest drivers? 2.6 it looks like.
http://www.focusrite.com/products/audio_interfaces/saffire_6_usb/downloads/
Does the microphone channel work ok? Have you tried reversing them.
What happens to that channel if the guitar is not plugged in, is there any noise?
Are you using a standard 2-conductor guitar cable, or is it by chance a three conductor stereo cable? It should be just a standard guitar cable.
It there anything else being used on the USB bus, are you plugged into a USB hub or directly into the Mac?
Speaking of which, wht Mac and OS?

Unable to record internal audio with RecordMyDesktop

In order to record sound and video from my desktop, I installed RecordMyDesktop (https://wiki.archlinux.org/index.php/RecordMyDesktop) and followed the instructions from post #4 and #6 on a thread about "Recording internal audio with alsa and recordmydesktop" (https://bbs.archlinux.org/viewtopic.php … 3#p1359593). When I try to record with "recordmydesktop --device looprec", it will not start recording and closes with the following error:
Initial recording window is set to:
X:0 Y:0 Width:1920 Height:1080
Adjusted recording window is set to:
X:0 Y:4 Width:1920 Height:1072
Your window manager appears to be i3
Initializing...
Buffer size adjusted to 4096 from 4096 frames.
Opened PCM device looprec
Couldn't set format.
Error while opening/configuring soundcard looprec
Try running with the --no-sound or specify a correct device.
If this information would be helpful, I use alsamixer and "aplay -l" gives the following:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 7/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
I can record from the microphone with with the command "recordmydesktop". I succeeded in recording the internal audio with audacity by choosing the device "looprec" for recordings. I'm not sure why RecordMyDesktop gives an error while Audacity does not. Below is my ~/.asoundrc, which I copied from the aforementioned thread. I am not knowledgeable, but I guess there is a mistake in it? Would you please assist me solving this error? Thank you for your time.
pcm.!default {
type asym
playback.pcm "LoopAndReal"
#capture.pcm "looprec"
capture.pcm "hw:0,0"
pcm.looprec {
type hw
card "Loopback"
device 1
subdevice 0
pcm.LoopAndReal {
type plug
slave.pcm mdev
route_policy "duplicate"
pcm.mdev {
type multi
slaves.a.pcm pcm.MixReale
slaves.a.channels 2
slaves.b.pcm pcm.MixLoopback
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
pcm.MixReale {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
pcm.MixLoopback {
type dmix
ipc_key 1025
slave {
pcm "hw:Loopback,0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
Last edited by rayanamukami (2014-07-05 14:05:20)

You might want to take a look here and here.

Unable to record a trasaction.

Similar Messages

Maybe you are looking for