Unable to record just audio with Mac Mini - no isight

I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an audio only podcast. I have a microphone plugged into the line in and it works successfully in Garageband. Please help!

Take a look at Soundflower, which will allow you to record audio from any source:
http://soundflower.en.softonic.com/mac
http://www.macworld.com/article/1159440/soundflower_capture.html

Similar Messages

  • Unable to record internal audio with RecordMyDesktop

    In order to record sound and video from my desktop, I installed RecordMyDesktop (https://wiki.archlinux.org/index.php/RecordMyDesktop) and followed the instructions from post #4 and #6 on a thread about "Recording internal audio with alsa and recordmydesktop" (https://bbs.archlinux.org/viewtopic.php … 3#p1359593). When I try to record with "recordmydesktop --device looprec", it will not start recording and closes with the following error:
    Initial recording window is set to:
    X:0 Y:0 Width:1920 Height:1080
    Adjusted recording window is set to:
    X:0 Y:4 Width:1920 Height:1072
    Your window manager appears to be i3
    Initializing...
    Buffer size adjusted to 4096 from 4096 frames.
    Opened PCM device looprec
    Couldn't set format.
    Error while opening/configuring soundcard looprec
    Try running with the --no-sound or specify a correct device.
    If this information would be helpful, I use alsamixer and "aplay -l" gives the following:
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
    Subdevices: 7/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
    Subdevices: 8/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    I can record from the microphone with with the command "recordmydesktop". I succeeded in recording the internal audio with audacity by choosing the device "looprec" for recordings. I'm not sure why RecordMyDesktop gives an error while Audacity does not. Below is my ~/.asoundrc, which I copied from the aforementioned thread. I am not knowledgeable, but I guess there is a mistake in it? Would you please assist me solving this error? Thank you for your time.
    pcm.!default {
    type asym
    playback.pcm "LoopAndReal"
    #capture.pcm "looprec"
    capture.pcm "hw:0,0"
    pcm.looprec {
    type hw
    card "Loopback"
    device 1
    subdevice 0
    pcm.LoopAndReal {
    type plug
    slave.pcm mdev
    route_policy "duplicate"
    pcm.mdev {
    type multi
    slaves.a.pcm pcm.MixReale
    slaves.a.channels 2
    slaves.b.pcm pcm.MixLoopback
    slaves.b.channels 2
    bindings.0.slave a
    bindings.0.channel 0
    bindings.1.slave a
    bindings.1.channel 1
    bindings.2.slave b
    bindings.2.channel 0
    bindings.3.slave b
    bindings.3.channel 1
    pcm.MixReale {
    type dmix
    ipc_key 1024
    slave {
    pcm "hw:0,0"
    rate 48000
    #rate 44100
    periods 128
    period_time 0
    period_size 1024 # must be power of 2
    buffer_size 8192
    pcm.MixLoopback {
    type dmix
    ipc_key 1025
    slave {
    pcm "hw:Loopback,0,0"
    rate 48000
    #rate 44100
    periods 128
    period_time 0
    period_size 1024 # must be power of 2
    buffer_size 8192
    Last edited by rayanamukami (2014-07-05 14:05:20)

    You might want to take a look here and here.

  • Dual video and audio with mac mini

    Hi there,
    I am looking at purchasing a mac mini, but would like to know if it is possible to have 2 monitors attached, but each monitor would have a different sound.
    Example.
    Video playing on the HD TV and then listen to music via the audio out.
    Many thanks

    The dual monitors is not a problem, but the audio scenario you're suggesting will only work if the music is streamed via Airplay.  I believe since mini only has a single audio card, output via conventional outputs (SPDIF, HDMI, 1/8") may only work one at a time.  Airplay streams music as data, and not as a signal, so that's how you'd work around that.

  • How to play DVD-Audio with Mac mini?

    I tried to search the forums but didn't find any answers...
    Mini is my only machine on living room I'm using for music, videos etc.
    Apple's DVD Player won't even open the disc, but says it's "invalid format".
    VLC does open the disc, but only outputs 2ch stereo in dolby surround I think.
    I have an DVD-A disc with DTS 6.1 ES mix.
    Thank you for any help!

    Got a partial solution by ripping the DVD with MactheRipper and then opening with Apple's DVD Player. This of course means that I have to burn a copy or keep the ripped version on my hard disk...

  • The best audio interface with Mac Mini using new & existing equipment?

    Hi,
    I got my existing set-up back in 2003. I'm now about to update it.
    I've talked to Apple Technical Support re which computer is best for me.
    Some important questions remain in terms of the audio interface or sound bridge I should use.
    I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
    Existing set-up:
    Hardware...
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. PowerMac G4 (PowerPC processor) computer
    3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    4. MOTU 2408 mk3
    5. Quested monitors
    6. Focusrite Session Pack ff ISA220 compressor
    7. MOTU micro lite (midi-usb interface)
    8. Keyboard (yet to choose - I'll explain later)
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Tiger 10.4.11 operating system
    12. Logic Studio 8 music program
    Desired set-up:
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. Mac Mini full spec = £999.00
    3. _______________________________________
    4. _______________________________________
    5. Quested monitors
    6. _______________________________________
    7. _______________________________________
    8. _______________________________________
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Top-end operating system = Comes with Mac Mini
    12. Logic Pro X music program = £139.99
    Existing configuration:
    ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
    PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
    When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
    When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
    I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
    My Questions:
    Q1) Can you recommend any keyboards meeting my specifications?
    Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
    Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
    Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
    Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
    Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
    Many thanks!

    Is there a reason you don't want to use your current Tascam?

  • Had it with Dell, just ordered a Mac Mini

    For a number of reasons (that are so boring it will likely kill anyone who reads them so I won't post them here) I am going to throw my 6 month old top of the line Dell XPS in the pool.
    I just ordered a Mac Mini and I can't tell you how happy I am. However I was wondering if there is anything I should expect, we warned of when I make the conversion.
    Are there any problems I should expect?
    How hard is it to get my "Stuff" from a pc to a Mac?
    Will I be able to read/use my excel and word files?
    Will the Mac work with my Dell monitor? It's a pretty nice monitor 27" inch monitor, and besides the fact that it has the Dell name on it there's nothing wrong with it. I've seen a couple of posts here that people are unable to connect the Mac to a TV through an HDMI port.
    After getting the iPhone I knew that I had to make the move to Apple and I can't wait. Any info would be appreciated.
    GBA

    Welcome!
    Most word processing and spreadsheet and photo files could be easily moved by putting them on an inexpensive USB "thumb" or "flash" drive. That's how I would transfer them. Or you could burn them to a CD or DVD on your DELL.
    Your Mini should have a trial version of Mac MS Office 2004. It should be able to open most of your PC files, depending on how you saved them. MS will be coming out with a newer Mac version early next year.
    A free option that would open just about all of them (and more than Office 2004 can) is NeoOffice ( http://neooffice.org ). That's what I use.
    If your Dell monitor has a VGA or DVI port it should work fine, unless it requires a Dual Link card to drive it. What model is your monitor?
    The new Minis now come with 1 Gig of RAM which is adequate for OK performance. If you ordered 2 Gig, multi-tasking will be snappier.

  • 2 different "switchable" audio output (HDMI and analog) with Mac mini

    Hello,
    I have a 2010 Mac mini that I use as a media center.  Its hooked up to my HDTV in the living room via HDMI.  I also want to hook up external speakers via the 3.5mm analog jack.  These speakers are in the kitchen.
    I would like to get my audio through HDMI when I watch TV and be able to get audio output via 3.5mm jack when I just want to listen to music in my iTunes library.  I like to control my iTunes library with the Remote app on multiple devices.
    Is it possible to switch automaticaly the audio output?
    Right now I use my Airport Express to stream music from my Mac mini to the speakers but I think that the Airport isn't really needed since it lies just by my Mac mini.  I'm pretty sure the mini can do both.
    I've tried to hook the speakers to my Mac mini but first: I hear a "hum" in the speakers (wich I don't hear with the Airport) and second: I can't seem to get the audio out in the speakers.
    I've read many posts about the audio midi settings but I can't figure it out...
    Any help?
    Thanks a lot.

    I hit post too early... here's the rest of it.
    See the Linein app- https://www.rogueamoeba.com/freebies/
    See the SoundFlower app- http://cycling74.com/soundflower-landing-page/
    See AU Lab- http://www.apple.com/itunes/mastered-for-itunes/
    With those apps (or combination thereof)
    You can copy an  audio stream from one output to another.

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

    I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

    Bluetooth: How to set up your Apple Wireless Keyboard

  • I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
    Also Time Machine does not back up a boot camp partition.

  • I HAVE JUST BOUGHT A MAC MINI WITH BLUETOOTH KEYBOARD AND ON SCREEN ALL IM GETTING IS A PIC SHOWING TO SWITCH ON KEYBOARD AND ANOTHER THAT SHOWS A SWITCH ON COMPUTER. I CANT SEE A SWITCH ON THE MINI.

    I have just bought a mac mini and am trying to set up. The unit is asking me to swith on bluetooth keyboard via pic 1 then pic 2 shows another switch.
    I can't see this switch. can anyone help before i launch this thing out the window!

    Symptoms
    When using Setup Assistant to configure your Mac mini or iMac for the first time, the Bluetooth keyboard may have difficulty pairing.
    Resolution
    Use a wired keyboard to configure the Mac mini or iMac with the Setup Assistant. If a wired keyboard is not available, follow these steps:
    Press and hold the Power button until the computer turns off.
    Press the Power button to start the computer.
    When a language selection appears, press and hold the power key on the Bluetooth keyboard so that the green light is flashing (discoverable mode).
    Use the mouse to click the language you would like.
    A code should appear on the screen. Enter the code on the Bluetooth keyboard and press Return. Note: No visible feedback appears on the screen while you enter the code.
    The computer and the wireless keyboard should now be paired.
    Reference link:
    http://support.apple.com/kb/TS4456

  • Just got a Mac Mini with iDVD 5...

    Now can I get the latest version (6) without having to pay the full price? I mean, I JUST got this new Mac about 3 weeks ago. Maybe 2? I forget.
    Thanks.
    Mini   Mac OS X (10.4.4)   1.5GHz G4, 1 gig of RAM, 64MB VRAM, 80GB hard drive, 300GB FW drive.

    SANTALOPE wrote:
    how do i get videos to loop in quick time. i just got a mac mini with mac OS X 10 lion. there is no menu bar at the top of the screen. thanks.
    It sounds like your playing the video full-screen and hence hiding the menubar. You can hit escape to get out of full-screen mode and then access the menus. However the keyboard command for this is Command-L (for loop).

  • Just purchased first mac, (Mini) did I forget anything?

    Hey Guys,
    I am a windows user, want to play with the Mac. I just bought a Mac Mini 80gig superdrive unit. I ordered a mac keyboard, apple support, and the M-Audio FastTrack Recording Interface to record my instruments.
    I expect to buy a regular usb mouse (is ths possible or has to be an apple mouse?)
    Also what would be the best way to switch the monitor between my pc and the mac? I am aware of KVM's but not sure how the Monitor ONLY solution will work!
    Please help and offer any advice, I am VERY excited about getting my hands on this thing!

    <q>Also what would be the best way to switch the monitor between my pc and the mac? I am aware of KVM's but not sure how the Monitor ONLY solution will work!</q>
    Arnold,
    Before I got my Apple Cinema Display I shared a TFT between the mini and my iMac. I bought a cheap, mechanical KVM-switch and just connected the TFT and both computers. Each computer used it's own keyboard and mouse. Worked like charme.
    JJ
    Don't steal music !! Just a statement, not an accusation

  • Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

    I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
    Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
    and plays properly.
    Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
    Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
    I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
    Thanks again.
    JP

  • Mic not working with MAC Mini on Line in

    Hi,
    Just got my MAC Mini 3 weeks ago - I've just tried using my audio line-in mic to do a test call with SKYPE and it doesn't work.
    I've gone into system preferences and tried to adjust the input volume but it doesn't seem to want to know...
    Any advice for this MAC newbie?

    Welcome to Apple Discussions!
    I would say the fact you get some audio from the mic but not enough for viable use indicates that your present microphone is not outputting a high enough signal. Many elecret condeser type mics, and others with battery power sources output below line level voltages, so the input in the mini would simply not be sensitive enough to register the signal, and you would get exactly the results you describe.
    There are microphone preamplifiers you could get to boost the mics signal level, or alternatively, a number of other microphones, including almost all USB devices of this type, which would likely serve your purposes very well.

Maybe you are looking for

  • ITS 620 - how to create a service file for SAPGUI for HTML option

    Hi, We have the following configuration : ITS 620 installed IIS webserver NTLM Authentication on webserver SAP 46C We have some reports that use the IACs option of creating ITS reports and we are able to create the service files using webstudio where

  • Need some pointers getting video from iPhone 4S to iMovie09

    Based on my research in this forum either of these methods should work, but they're not working for me.  If you have any advice on debugging the problem it would be greatly appreciated! I took video with the 4S and see that it's in the Camera Roll. F

  • Is Apple TV able to connect to more then one tv

    I was wanting to get Apple TV but I have 3 TVs can I connect Apple TV to all of them or do I have to buy a seaprate Apple TV for each tv.

  • How to get back my Photos in iOS 8

    Hi. I have a iPhone 5S, last week I updated my device to iOS 8 and then i lost 50% of my photos. Im not talking about "Streaming photos", i lost 50% of the photos in the camera roll. I know that in iOS 8 the camera roll its split in different folders

  • Reference entities in View Objects

    Hi, I have several questions related to the use of multiple entities in a View Object. Suppose I have three entity objects: Product (N) <-> (0..1) Manufacturer (N) -> (1) State. (In a state there are several manufacturers, and each manufacturer makes