Unable to recover data files from cds after system recovery

My g7 Pav. NB crashed. I made backup cds and recovery media cds. I performed a system restore and the NB started working OK, Now I can't restore any data from the cds. The data on the cds will not "recover".
What now? I have thousands of photos in the recovery/backup cds.
PJC

It would be great If you could  share the exact error message that comes out whenever you try to access that particular media CD. Alternatively, you could use another computer/laptop to check and see if that particular CD has problems only in your system.
CD DVD Recovery software would be your last resort if none of the above options would seems working. Download trial version of stellar phoenix CD recovery software from here:
http://www.stellarinfo.com/cd-data-recovery.htm
Good Luck!!

Similar Messages

  • Unable to delete data files from my Ipod if used as data storage...

    Hello everybody
    I bought months ago an Ipod Nano 8GB. I've got an issue when i use it as disk storage i'm not able to sort out. I've checked all the topics but i cannot find any solution.
    Example: I use the Ipod with the option "Manually manage music and videos". I put audio and video files on my Ipod through Itunes, then i put also some files on my Ipod as normal data files through my Mac Finder (Easy, i drag VLC, JPG files etc. from folders to my Ipod). The Ipod/Itunes summary page shows (Correctly) the capacity column colored in blue (Audio), video (Purple) and orange (Data). No probs when i transfer data files to another computer.
    Problem: when i delete the data files from my Ipod (Through finder) the orange column doesn't disappear (I have no problems if i delete audio/video files via Itunes) and although i've actually deleted all the files if i try to add some other data or videos/music files to my Ipod, Itunes says that there is no space available in my device. It's very strange, i check and double check all the options but eventually i have to restore my Ipod all the times and (Pretty annoying) add all my files again.
    It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
    It'd be great if someone can help me out as it's very important for me to be able to use my Ipod as disk storage, thanks a lot!

    It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
    Empty it from the Finder menu or by control-clicking it in the Dock.
    (44613)

  • Recovering lost files from iphone after it was restored?

    Hi, i was restoring my iphone (the last time i had restored it was in february), and now all my files, pictures, contacts, everything, that ive had since february until now are gone. Is there any possible way i can recover them? Or is there no way to get them back?

    This is my first iPhone and iPhone issue, but I think your out of luck...unless magic happens

  • I cannot recover my pdf files from ibooks after upgrading to os 6

    Does anyone know how to recover pdf files from ibooks after os 6 upgrade?

    In your next-to-last post, you said: "... when I recovered the iBooks app, it was empty due to having a different owner of the app."
    I'm suggesting you change the owner of the app and maybe then it won't be empty.
    You can delete/remove the app and get your own from the app store and install it.  Maybe then you'll see your PDFs.

  • I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

    I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

    renatocremonese wrote:
    I want to use it for backing up my Mac.
    It's good for that . . . 
    But also I don't keep all my stuff in my Mac.
    But not for that. 
    This older and not day-by-day usage files I want to store in the time machine.
    You can do that (see below), but how are you going to back them up?   If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
    Is it possible to split TC in two partitions.
    No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space.  See #Q3 in Using Time Machine with a Time Capsule.
    But you still won't have backups of the stuff you put there.
    You don't say what kind of Mac you have.  If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
    However, it sounds like you may have a laptop, where that's not going to be convenient.  In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
    To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
    Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
    You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

  • Using Data Rescue II to recover lost files from corrupt hard drive!!!

    OK I am terribly confused. I found out my MacBook Pro hard drive is corrupt and I can't even start up my computer. I was told to get Data Rescue II, another Mac, and an external hard drive.
    I have all of the above but have no idea how to make it work!! How do I access the corrupt HD on the current iMac I am using with Data Rescue and then transfer the found files to the external HD??? Please I need help asap!!

    First, if you have an external drive, then install OS X on the external drive. Boot from the external drive, install Data Rescue, then run Data Rescue and see if you are able to recover any files from the bad drive.
    You boot from the external drive by restarting the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the external drive then click on the down arrow button.
    If you do not have an external drive then you can try connecting the two computers with a FireWire cable and booting the computer with the bad drive into Target Disk Mode. Boot the good computer normally. Install Data Rescue and run it to see if you can recover anything from the bad drive. My guess is this method will not likely work, but one never knows without trying.
    BTW, have you tried the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

    My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

    After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB.  Then try to drag and drop  your data to the new HDD. 
    If this proves unsuccessful, you may look for data recovery software on the Internet.  There will be free trails to see if it will work or not.  If the trial suggests that it will work, then you will have to purchase the software.
    The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
    As you now can appreciate, backups eliminate such predicaments.
    Ciao.

  • HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

    Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • R3trans finished 0012 / cannot recover data file 1 file is in use or recove

    Hi
    After a system Cloning from PRD to SandBox, SAP doesn't start any more :
    /usr/sap/SID/SYS/exe/run/startdb: Terminating with error code 12
    DB startup failed
    On the other hand, I can start the database manually, but SAP still doesn't connect to the DB.
    The R3trans -d returns the following :
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SID/SYS/exe/run') or dbms_type ('ORA')"
    R3trans finished (0012).
    DIR_LIBRARY is correctly set.
    I tought may be the databse is inconsistent, so I tried to recover the it.
    The recover command doesn't work too :
    ORA-00283: recovery session canceled due to errors
    ORA-01124: cannot recover data file 1 - file is in use or recovery
    ORA-01110: data file 1: '/oracle/SID/sapdata1/system_1/system.data1'
    I shall be very grateful to you for any help !
    Regards

    Hi,
    DB was started with "startup"
    trans.log
    4 ETW000 R3trans version 6.14 (release 701 - 23.07.10 - 09:23:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 24.08.2011 - 14:15:28
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  wed aug 24 14:15:28 2011                                                 106  0.000106
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                        11  0.000117
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                 30  0.000147
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/SID/SYS/exe/run/dboraslib.o' ...             37  0.000184
    4 ETW000  [dlux.c      ,00000]  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dboraslib.o") FAILED
    4 ETW000                          "     0509-022 Cannot load module /usr/sap/SID/SYS/exe/run/dboraslib.o.
    4 ETW000                                0509-150   Dependent module libclntsh.a(shr.o) could not be loaded.
    4 ETW000                                0509-022 Cannot load module libclntsh.a(shr.o).                        1360  0.001544
    4 ETW000                                0509-026 Syste"  (errno=2,No such file or directory)
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dboraslib.o'
    4 ETW000                                                                                69  0.001613
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SID/SYS/exe/run') or dbms_type ('ORA')"
    Thanks

  • How can i recover deleted files from my mac book

    how can i recover deleted files from my mac book

    Check out software like Data Rescue 3 (and you need an external drive to recover to)

  • B2b unable to pick the file from xml gateway

    Hi All,
    I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
    Still its unable to pick the files from xml gateway.
    Clarify my understanding please
    While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
    Here i am attaching the logs:
    2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
    2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
    2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
    2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
    2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
    2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
    2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
    2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
    2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
    2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
    2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
    2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
    2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
    2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
    2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
    2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
    2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
    2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
    2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
    2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
    2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
    2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
    2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
    2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
    2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
    2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
    2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
    2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
    2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
    2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
    2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
    2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
    2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
    2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
    2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
    2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
    2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
    2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
    file.receiver.wallet_password = *****
    file.receiver.polling_interval = 5
    file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
    file.receiver.marker = false
    marker = false
    ccc = false
    file.receiver.channel_mask = None
    file.receiver.minimum_age = 0
    filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
    file.receiver.van = false
    file.sender.channel_mask = None
    file.receiver.user = eiced1
    PROTOCOL_ENDPOINT = null
    file.receiver.password = *****
    file.receiver.preserve_filename = false
    transport_callout_waittime = 30
    preserve_filename = false
    file.receiver.ccc = false
    van = false
    polling_interval = 5
    2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
    2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
    2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
    2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
    2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
    2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
    2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
    2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
    2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
    2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
    2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
    2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
    2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
    2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
    regards
    cnu

    Anuj,
    The log which i placed on top, thats the complete log and DC log is given below
    2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
    2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

  • Unable to download pdf files from websites

    For a month now I have been unable to dowload PDF Files from websites.
    I have un-installed Adobe Software & re-installed hoping this would solve
    this on going problem. But I am afraid it has not this problem seems to
    have accured since the latest up date of Sarfari I trust Apple are coming up with
    some sort of solution to this current problem ??

    Far as I know the problem isn't on Apple's end. I'm download PDF files with no problem. But I've experienced what you are in the past and I think you were on the right track when you suspected Adobe. In the main Library folder (not the one in your personal directory) there's a folder called Internet Plugins. Look inside for a file called AdobePDFViewer and delete it. If I remember properly, you force Adobe Reader to install a new one by just starting Reader and it will ask if you want to install the PDF reader. Or, you might want to look at this plugin which, in my opinion, beats Adobe's plugin hands down.

  • ORA-01124: cannot recover data file 1 - file is in use or recovery

    I am trying to recover standby database, but it is giving the below error.
    ORA-00283: recovery session canceled due to errors
    ORA-01124: cannot recover data file 1 - file is in use or recovery, recovery is already stated
    ORA-01110: data file 1: 'I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM.DATA1'
    when i checked in the alert log the recovery is not started. and later i hae given "alter database recover cancel' and the command end up with the below line
    "media recovery not started".
    it seems that the recovery has stuck in between.
    please advise me how to kill the recovery session that's stuck. because i dont want to bounce the standby database.
    thanks in advance.

    Without dataguard and MRP, you are running a scripted standby.
    In a scripted standby, a RECOVER DATABASE session would have an UNTIL clause (most likely UNTIL SEQUENCE). At the end of the recovery to that point (SEQUENCE#), it exits and shuts down the database.
    Also, the scripting is such that when one RECOVER session is active, another session is not allowed to start. It may loop in wait state or exit and retry at the next scheduled interval.
    Apparently your standby scripting is not robust enough to prevent another RECOVER session from starting off even as the first is active (and/or it doesn't have a proper UNTIL clause and stop, exit, shutdown actions)
    What you have is a custom implementation of a standby database. Without complete details of the script, the "locking" between sessions (to prevent a second RECOVER from starting when one is already running) etc .... we really cannot do much to help you.
    Your scripts should be maintaing status information . It should be possible for you to discover the "other" sqlplus session that has issued a RECOVER DATABASE but not yet exited (e.g. ... how about a simple "ps -ef |grep sql" and "ps -ef | grep ora" combination ??)
    Hemant K Chitale
    Edited by: Hemant K Chitale on May 29, 2013 5:47 PM

  • Recover missing files from FAT32 SD card?

    I got back from a trip and used the SD card slot in my MacBook Pro to import my photos -- first into Aperture, and then using Image Capture to make a second copy as regular image files. Then I used Image Capture to delete the files from the card.
    So far, so good....except nearly 300 photos have are missing -- the last 300 I took on the card. If I look at the card in the Finder now (it's FAT32), there aren't any photos on it. But there is still over 3GB of data, suggesting the missing photos' data is on there somewhere.
    Any suggestions for how to recover it? TechTool Pro doesn't see the card at all (maybe doesn't support FAT32?).
    Thanks.

    You can follow the way to see how to recover deleted files from sd card. Connect the data cable for the card reader to an empty USB port on your computer. Insert the SD card into the external or built-in card reader. Right-click the Recycle Bin icon on the desktop, then click "Open." Highlight and select the deleted files on the SD card you want to restore to the device. Right-click one of the selected files on the SD card and then click "Restore." Besides, you can also use Data Recvoery to restore your data even your SD card is damaged.

  • ORA-01173: data dictionary indicates missing data file from system tablespa

    Hello
    My Database is 11gR1 and Linux is the OS. Thought of posting it as a new thread as things have changed a lot.
    2 of my database file were lost due to hardware failure. (the datafile do not belong to SYSTEM TABLESPACE) and and the second was datafile for undo tablespace.
    I created control files with command not mentioning the lost datafiles:
    CREATE CONTROLFILE REUSE DATABASE "BSSGLB" NORESETLOGS NOARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 5
    MAXDATAFILES 600
    MAXINSTANCES 10
    MAXLOGHISTORY 1168
    LOGFILE
    GROUP 1 '/DB/app/oracle/oradata/bssglb/redo01.log' SIZE 500M,
    GROUP 2 '/DB/app/oracle/oradata/bssglb/redo02.log' SIZE 500M,
    GROUP 3 '/DB/app/oracle/oradata/bssglb/redo03.log' SIZE 500M
    -- STANDBY LOGFILE
    DATAFILE
    '/DB/app/oracle/oradata/bssglb/system01.dbf',
    '/DB/app/oracle/oradata/bssglb/sysaux01.dbf',
    '/DB/app/oracle/oradata/bssglb/users01.dbf',
    '/DB/app/oracle/oradata/bssglb/bss01.dbf',
    '/var/oracle/oradata/bssglb/bss02',
    '/var/oracle/oradata/bssglb/system02.dbf'
    CHARACTER SET US7ASCII
    I have all the files mentioned in the datafile section of the above command.
    But somehow when i try to open the DB, first it asks for the media recover. When i recover database then it disconnects database saying:
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Process ID: 4768
    Session ID: 170 Serial number: 5
    Contents of the alert log file are:
    Beginning crash recovery of 1 threads
    parallel recovery started with 3 processes
    Started redo scan
    Completed redo scan
    1 redo blocks read, 0 data blocks need recovery
    Started redo application at
    Thread 1: logseq 7, block 2, scn 20356182450
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 7 Reading mem 0
    Mem# 0: /DB/app/oracle/oradata/bssglb/redo01.log
    Completed redo application
    Completed crash recovery at
    Thread 1: logseq 7, block 3, scn 20356202453
    0 data blocks read, 0 data blocks written, 1 redo blocks read
    Sun Feb 20 08:16:23 2011
    Thread 1 advanced to log sequence 8
    Thread 1 opened at log sequence 8
    Current log# 2 seq# 8 mem# 0: /DB/app/oracle/oradata/bssglb/redo02.log
    Successful open of redo thread 1
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Sun Feb 20 08:16:23 2011
    SMON: enabling cache recovery
    Errors in file /Oracle/app/oracle/diag/rdbms/bssglb/bssglb/trace/bssglb_ora_4550.trc:
    ORA-01173: data dictionary indicates missing data file from system tablespace
    Error 1173 happened during db open, shutting down database
    USER (ospid: 4550): terminating the instance due to error 1173
    Sun Feb 20 08:16:25 2011
    Instance terminated by USER, pid = 4550
    ORA-1092 signalled during: alter database open...
    ORA-1092 : opiodr aborting process unknown ospid (4550_182910338848)
    Sun Feb 20 08:16:26 2011
    ORA-1092 : opitsk aborting process
    Guys please help me out of this situation.
    Regards, Imran

    STOP opening new threads for ongoing solution to SAME problem
    Re: I have copy of data files! How to install and add these files to database!
    Re: Failure of network storage!
    Re: I have copy of data files! How to install and add these files to database!
    Handle:      misterimran
    Email:      misterimran
    Status Level:      Newbie
    Registered:      Jan 15, 2002
    Total Posts:      1,109
    Total Questions:      130 (115 unresolved)
    so many questions & so few answers!
    Edited by: sb92075 on Feb 19, 2011 7:49 PM

Maybe you are looking for

  • Data Laoded successfully, giving error while activating the ODS

    Hi, Process Chain is running daily for  loading and activating the data into the ODS. Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated. I ch

  • I lost entire photo library in iPhoto.  How do I retrieve the lost library?

    I went to open iPhoto only to find my entire photo library was gone.  I have no idea how this has happened.  I backed up my photos on an external hard drive but cannot access them that way.  I keep getting a message saying it's a backed up version an

  • 'Gross sales' field in mc+e report

    Hi, Only for certain sales areas, the 'gross sales' field in the mc+e report is getting populated. For others it is not. Is there any setting which needs to be done for this field to get populated? Also, which value exactly is supposed to be showing?

  • Have two facet in column header

    Hi, i want have in the column header a static text and button, i do this with facet but if i add a button, the text become invisible, how can i do this? If i want use button only it not centred in the header, how I can make it center? NB : in the old

  • I have to refresh every single website in order to see it

    Hello, i have a problem with my safari, everytime i try to go to a website i have to refresh the website in order to see it. If i dont refresh, it takes long to load the website. Does anyone know why this is happening?, i thought i was only safari bu