Unable to refresh Task payload in Business Rules editor

Hi,
My task's payload xsd changed, so I refreshed its data control and can see additional attributes reflecting correctly in data controls accordian. However, when I try to use new attributes in business rules editor, it doesn't show them there. I even tried going to that rules dictionary's structure and refreshing 'Task' XML fact therein, but to no avail. Do we need to do anything extra to reflect new attributes in business rules editor?
Thanks,
Harsh

Hi Kranthi,
Based on my observation the source account column specification in the Automatic Adjustment Details business rule allows only to specify a member of either account id or TYPELIM property from account dimension. Other properties not available for the selection.
Hope this helps.
Regards,
Badrish

Similar Messages

Customizable checkbox at IF/THEN Business Rule Editor

Hello.
Does anyone know what "Customizable" checkbox is for? It can be found at Business Rule Editor on IF/THEN view: if you click any test or action parameter you will see in in popup. I have not found clues in documentation.
Here is the scrrenshot: View image: business rules

I have found this section in documentation of the rule engine
1.3.5.2 Constraint Definitions
Constraint definitions let you mark portions of rules as customizable. For example, the discount to offer to a Gold customer could be constrained to be within a specified range such as 5 to 25 percent. Using Rule Author, by defining a constraint, you can select a value from within the specified range using a special interface that does not allow you to modify the entire rule.
My thought is that if you check the box you can fine grain a specific rule on runtime.

Unable to use DIMLIST property in business rules

Hi Team,
We have updated Account dimension with TYPELIM(10), DIMLIST(20) properties and in AUTOMATIC ADJUSTMENT DETAILS in the SOURCE ACCT when we update it with valid account ID or TYPELIM property value, it validates sucessfully.But, when we update it with Valid DIMLIST property value, it throws an error <Property Value> value does not exists in ID,TYPELIM of Account dimension. We are able to see the DIMLIST property values in the list of available options.
We are unable to use the DIMLIST property in other business rules and for FLOW dimension also.
Server Details : BPC MS 7.0 SP3 patch level 2
Appreciate if you can give your inputs on this.Please let me know if I need to provide any other information.
Kranthi

Hi Kranthi,
Based on my observation the source account column specification in the Automatic Adjustment Details business rule allows only to specify a member of either account id or TYPELIM property from account dimension. Other properties not available for the selection.
Hope this helps.
Regards,
Badrish

Unable to associate an outline for business rule

Hi All,
I am not able to associate an outline (either essbase or planning) to validate a business rule. The hbrserver.log from epmsystem1/diagnostics/logs/eas
says below output.
2012-03-28 17:57:40,192 WARN [ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.plugin.essbase.EssbaseMetadataServerElement - Error connecting to Essbase server http://<servername>:19000/aps/Essbase?clusterName=EssbaseCluster-1.
2012-03-28 17:57:40,193 WARN [ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.plugin.essbase.EssbaseMetadata - Error connecting to Essbase server EssbaseCluster-1.
2012-03-29 09:57:13,209 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Exception occured: EPMCSS-00502: Failed to get group with identity native://DN=cn=f5ef9686a5e205bd:7ad025f2:12202d6e25a:-7ffe,ou=Groups,dc=css,dc=hyperion,dc=com?GROUP. Group not found in configured user directories. Check user directory.
2012-03-29 09:57:13,211 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving group by identity
2012-03-29 09:57:13,283 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
2012-03-29 09:57:13,354 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
2012-03-29 09:57:13,419 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Exception occured: EPMCSS-00502: Failed to get group with identity native://DN=cn=f5ef9686a5e205bd:-1c3b8cd:11ffef2e704:-7ffc,ou=Groups,dc=css,dc=hyperion,dc=com?GROUP. Group not found in configured user directories. Check user directory.
2012-03-29 09:57:13,420 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving group by identity
2012-03-29 09:57:13,725 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.plugin.planning.PlanningMetadata - Error connecting to Planning server ojhyperiondev01.mtn.com.ng.
2012-03-29 09:58:25,363 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Exception occured: EPMCSS-00502: Failed to get group with identity native://DN=cn=f5ef9686a5e205bd:7ad025f2:12202d6e25a:-7ffe,ou=Groups,dc=css,dc=hyperion,dc=com?GROUP. Group not found in configured user directories. Check user directory.
2012-03-29 09:58:25,364 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving group by identity
2012-03-29 09:58:25,449 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
2012-03-29 09:58:25,516 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
2012-03-29 09:58:25,579 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Exception occured: EPMCSS-00502: Failed to get group with identity native://DN=cn=f5ef9686a5e205bd:-1c3b8cd:11ffef2e704:-7ffc,ou=Groups,dc=css,dc=hyperion,dc=com?GROUP. Group not found in configured user directories. Check user directory.
2012-03-29 09:58:25,579 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving group by identity
2012-03-29 09:58:25,694 WARN [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.plugin.planning.PlanningMetadata - Error connecting to Planning server ojhyperiondev01.mtn.com.ng.
2012-03-29 10:00:08,562 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.plugin.essbase.EssbaseMetadataServerElement - Cannot sign on as user already signed on.
com.essbase.api.base.EssException: Cannot sign on as user already signed on.
     at com.essbase.api.session.Essbase.signOn(Unknown Source)
     at com.essbase.api.session.Essbase.signOn_internal(Unknown Source)
     at com.essbase.api.session.Essbase.signOn(Unknown Source)
Can anybody help me please.. I tried with newly created admin user with all the privillages.. still no luck.
Many Thanks

Is this 11.1.2.1 by any chance?
We had this as well, but resolved the issue with this KB:
Error: "Error connecting to Essbase server EssbaseCluster-1" When Trying to Connect Business Rules to Essbase [ID 1328483.1]
     Modified 25-JUL-2011 Type PROBLEM Status PUBLISHED
In this Document
Symptoms
Cause
Solution
References
Applies to:
Hyperion Essbase - Version: 11.1.2.1.000 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
in version 11.1.2.1, after switching Essbase from using host name to a cluster name, in Essbase Administration Services (EAS) it is no longer possible to navigate lower than "EssbaseCluster-1" in the tree of Locations in Business Rules. The following error occurs:
"Error connecting to Essbase server EssbaseCluster-1".
This happens with both pre-existing and new business rules.
Cause
This issue has been identified as unpublished BUG 11783671 - Unable To Select Outline For Essbase Rule If Essbase Cluster1 Is The Server
Solution
The current workaround is:
1. Search for the file named 'essbase.properties' under %EAS_HOME%. Note that normally on a windows setup %EAS_HOME% points to the following path:
":\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas"
If it does not exist, create a blank text file and name it 'essbase.properties' and place it under %EAS_HOME%\server\bin
2. Open it in notepad and add the following setting to the beginning of the file:
aps.resolver.urls=http://<APSSEVERNAME>:APSPORT/aps
e.g aps.resolver.urls=http://server1:13080/aps
NOTE: The line is case sensitive
3. Save the file and restart the EAS server.

LOV Refresh based on the business rule

My requirement is to refresh the LOV based on a value selected in another LOV. Say the LOV required to be refreshed as LOV2 and the LOV in which the value is selected and which triggers the LOV2 refresh is LOV1. Both the attributes of LOV1 and LOV2 are present in the same VO. Lets say attribute A1 for LOV1 and A2 for LOV2. The VA for LOV2 is present at EO Level and there are 2 view criteria and 4 bind variables in this view accessor. 3 of the bind variables are assigned values at the EO level by calling get method of another EO. For the value selected in LOV1 (i.e. it displays values of the attribute present in UI Hints of View Accessor) the corresponding attribute value present in the VO is required and that should be passed to the bind variable so that the query gets executed for LOV2 and LOV2 gets refreshed.
The few constraints which I have here is
1. View Accessor of LOV2 cannot be written at VO Level because 3bind variables should be set at the EO level as there is an association present
2. VA Override is not permissible as it throws an error because other bind variables are set at the EO Level
3. I can have a value change listener and pick the attribute Value when the user selects it and store in a page flow scope. But this value is the UI Hints value (which is displayed in the UI ) , I require the corresponding attribute value of this UI Hints attribute value being displayed.
4. I was not able to use a view link for this scenario because I've to use a DECODE functionality in where clause.

Hi Gary,
You can have try by using following tab :
The table CRMD_ORDER_INDEX: Contains GUIDs of all the transactions in CRM. Also provides a link to connect Business Partner with the CRM Transaction (Contains Header as well as Item details for a Business Transaction.Note: This table can be used for search based on the Partner No ).
Hope this will help you
Regards,
Arjun
<b>Reward points if it helps</b>

Problem in mapping Task payload parameters to Oracle Business Rules facts

Hi all,
We are using complex types from our project XSDs inside the Human Task payload. We intend to use these Human Task payload parameters to build routing rules using the Oracle Business Rules interface. Our observation is that when the complexity of these complex types increase, the business rules editor does not show these as facts that can be used in formulating rules.
Has anybody faced such a problem before. Any help is appreciated.
We are using the following link to add routing rules –
http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bp_decision.htm
Version details :
ADF Business Components     11.1.1.60.13
Java(TM) Platform     1.6.0_29
Oracle IDE     11.1.1.5.37.60.13
SOA Composite Editor     11.1.1.5.0.01.74
Thanks,
Yamini.

Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Calc Manager - Unable to select RTP on business rule

Hi,
I am unable to select RTP on calcmanaget business rule. I am running 11.1.2.1 EPM on windows VM. Have anyone had this issue? please let me know the solution if anyone knows.
regards,
Kalai

I am in the process of creating Business rule for Essbase (BSO) applicaion. Business rule is created fine getting issue on RTP. RTP check box is gray out and I am not getting any error message and using IE8
thanks,

Error while validating Business rules in EAS

Hi,
Iam new to hyperion. I created business rule in EAS (using a user with businessrule admin role). when i tried to validate the same, it gives an error message like *"Unable to validate or run this business rule. Detail:Exception occurred. Please check your log file for details"*. So wats the actual problem.
Thanks in advance.

Sounds like you have not added security to the rule. Before you assign security you must set the Location in the Location tab, this is the db you want to run the BR on (you can also use 'Allow all Locations')
Then you must goto security tab and assign users / groups to the BR, once you have done this the BR should validate and run.
J

Hyperion Business Rules and Essbase

I have an allocation business rule that uses the DATACOPY command to copy data from one cost center to another. I would now like to have the sum of 2 cost centers copied into the allocation cost center. In an Essbase calc script, I accomplished this by FIXing on some dimensions and then:
DATACOPY cc1 TO alloc_cc;
alloc_cc = alloc_cc + cc2
This works fine in a calc script, but the business rule does not like the "alloc_cc = alloc_cc + cc2" line. How do I accomplish this task in a business rule?
Thanks.
Terri T.

when I validate, I get this message.
Detail:Cannot calculate. Essbase Error(1200354): Error compiling formula for [alloc_cc] (line 13): expected type [NUMBER] found [STRING] (["CC2"]) in function []
Edited by: Terri T on Jan 30, 2013 11:07 AM

Business Rules : Sample Project

Hi,
Is any body has use the BPM's Business Rules feature, i need a sample project how to define and use this feature.
Thanks,
Brijesh Kumar Singh

Here's a tutorial I wrote that shows how to create and edit business rules using the Oracle BPM 10g Business Rules Editor from both a developer and an end user perspective. It's a part of the basic training we provide:
http://www.4shared.com/file/GiMR6iei/Business_Rules.html
Dan

Where is the Rules Editor in 11G TP4

Based on the link the Oracle Business Rules editor should be in 11G TP4, however I can't seem to find it anywhere on the menu. What am I missing?
http://www.oracle.com/technology/products/jdev/collateral/papers/11/newfeatures/index.html#JDeveloperandADFRelease11NewFeatures-JavaCodingandAgileDevelopment

Sorry...I found the answer in the MetaLink section.

Unable to create Human Task and Business Rule in JDeveloper

Hello,
I am unable to create Human Task or business rule in my JDev... am getting below error in Feedback tab.
Previously reported error [NoSuchMethodError in o.mds.internal.dt.config.NamespaceConfigBuilder:397]
And Below is the message log trace.
Oct 15, 2012 12:58:51 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Oct 15, 2012 12:58:51 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.
Oct 15, 2012 12:58:51 PM oracle.jps.common
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: line 3 column 19.
Any idea/suggestions would be greatly helpful.
Thanks,
Sudheer

Its due to JDeveloper installation or cache issue...
I uninstalled completely and installed again. I am able to create Human Task now. Maybe it helps someone.
-Sudheer

Unable to refresh database after forced stop of the business rule

Hello, Experts!
I am currently testing and tuning performance of business rules in Hyperion Planning 9.3.1. I launched a business rule in EAS Console that was running way too long so I decided to stop it manually. But after this manual stop when I try to refersh Essbase from Hyperion Planning (Administration>Manage Database>Database Refresh) I get the following error:
+com.hyperion.planning.olap.EssbaseException: Cannot restructure. There are other active users on database [%s] (1013101)+
I remember having done forced business rule stops earlier in other Hyperion Planning 9.3.1 deployments and they did not generate such errors. So could you help me on how I prevent Hyperion Planning from this error after manual business rule stops because most likely I will have to do them in the future? Thanks very much!

John, you are right. I erred earlier: I was thinking that I had stopped the business rule, but it still was running. I had not seen this rule running because of lack of permissions for my user name. After adding extra Essbase permissions to my user name in HSS, I was able to see in EAS Console in Ediit>Sessions window that the rule was still running and Hyperion Planning definitely will produce the above error message if one tries to refresh Essbase cube while the rule is still running.

Unable to access Business Rules Facts after refreshing XML Facts

I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
Is this a bug or a feature?
I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Unable to open/edit Business rules v9.3

Hello,
I am unable to open/edit existing business rules in v9.3 in the AAS console. I get an error message: Exception occured: Please check your log for details.
Business rules have been working without issues for months. I checked the easserver.log and it is getting a java.lang.nullpointerexception when I try to open/edit rules. I have done all the normal checks/updates: restarted services, rebooted servers, checked provisioning, refreshed security from shared services, refreshed planning to essbase, logged into Planning first, etc.
I believe the issue occured when a business rule was deleted which "may" have been included in a sequence. Since I cannot open any BRs or sequences I cannot validate that assumption.
Another side note, I can create a BR and attached it to a location, but once I save it I am unable to open it. I have started looking thru the tables in the AAS RDB but it "seems" ok.
Any help would be appreciated!

Hi,
I have not come across this sort of issue before, if you don't find a solution then as a final measure I would backup up the repository and export all the rules/macros/variables etc to xml.
Then I would first redeploy the web application server and see if that helps, if not I would reconfigure the database and drop it and then import the xml back in.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to refresh Task payload in Business Rules editor

Similar Messages

Maybe you are looking for