Unable to register a secondary ACS 5.2 appliance

Hello,
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
Am I doing anything wrong?
Is there any LOG I can check to troubleshoot this?
Thanks a lot!!!
Regards,
Julio

I finally found the problem. I was using admin user (super user priviledges). I created another user with all permissions and it worked.
Thanks a lot.

Similar Messages

Unable to login to Switch & Router through secondary Acs ,when primary ACS is down.

Dear All,
i have configured primary ACS in DC data center and secondary ACS in DR data center, i have configured replication , and it is working well, but when we put down primary ACS , we are unable to login in switch and router through secondary ACS , i ahve dedicated link between core dc sw to core dr sw through which all traffic is getting replicated . All user , mgmt vlan are created in FWSM firewall.Kindly help.
Regards
Amit Kulshrestha

Hi Bro
I'm assuming you've configured your ACS correctly and the Cisco network devices correctly. Perhaps, this could be a bug. The reason I say this is because last week, I was implementing 2 units of Cisco ACS 1121 v5.3 (in HA mode) for a client, and i had similar issues myself. When I down the primary ACS, I'm unable to login to my network devices, eventhough my secondary ACS is UP and PINGable from all network devices.
Hence, I downloaded and applied the latest cummulative patch from the CCO website 5-3-0-40-4.tar.gpg (Release Date: 27/May/2012) and my problem solved.
Perhaps, your ACS version isn't 5.3, but the morale of the story here is, maybe patching is required for your case!!
Please do let me know the outcome. May the force be with you, bro!

Unable to register secondary node on Cisco ISE 1.1.4

Hello,
I have a problems with registering the secondary node on Cisco ISE 1.1.4.
I did all like described on User Guide:
- Primary ISE is promoted to PRIMARY.
- DNS entries are added and resolved for both ISEs
- The "Certificate Store" on both ISEs are populated with self-signed certificates from both ISEs.
Durring the registration process (from Primary node), when I add the IP, username and password for secondary node, an empty popup message displayed with only button "OK".
So, I cannot proceed to far and don't see the error indicated what's wrong.
In attachment - screenshot with popup message.
I use IE 8.0.6001.
The lattest patch (1.1.4.218-7-87377) applied on both ISEs.
Is somebody had the similar problem?
Thanks,
PC

Hello,
In the debug logs "ise-psc.log" I see :
2013-11-11 08:43:47,534 ERROR 2013-11-11 08:43:47,534 [http-443-7][] cpm.admin.infra.action.DeploymentEditAction- An exception occurred during the registration of a deployment node: java.lang.NullPointerException
java.lang.NullPointerException
at com.cisco.cpm.admin.infra.action.DeploymentEditAction.registerSubmit(DeploymentEditAction.java:455)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.cisco.webui.action.common.PojoActionProxy.performExecution(PojoActionProxy.java:176)
at com.cisco.webui.action.common.PojoActionProxy.execute(PojoActionProxy.java:89)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.xmp.wap.dojo.servlet.filter.DojoIframeSendFilter.doFilter(DojoIframeSendFilter.java:58)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.admin.infra.utils.WebCleanCacheFilter.doFilter(WebCleanCacheFilter.java:35)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.rbacfilter.AccessCheckFilter.doFilter(AccessCheckFilter.java:71)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.admin.infra.utils.UserInfoFilter.doFilter(UserInfoFilter.java:110)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.admin.infra.utils.CsrfPreventionFilter.doFilter(CsrfPreventionFilter.java:113)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.admin.infra.utils.LoginCheckFilter.doFilter(LoginCheckFilter.java:188)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.cisco.cpm.admin.infra.utils.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java:121)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:563)
at org.apache.catalina.valves.RequestFilterValve.process(RequestFilterValve.java:316)
at org.apache.catalina.valves.LocalAddrValve.invoke(LocalAddrValve.java:43)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.authenticator.SingleSignOn.invoke(SingleSignOn.java:394)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.valves.MethodsValve.invoke(MethodsValve.java:52)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:602)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
at java.lang.Thread.run(Unknown Source)
2013-11-11 08:44:00,226 INFO 2013-11-11 08:44:00,226 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- editPreload() triggered. Selected hostname is BB1NACEASTP01
2013-11-11 08:44:00,226 INFO 2013-11-11 08:44:00,226 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- ParameterNames in load()= BB1NACEASTP01
2013-11-11 08:44:00,226 INFO 2013-11-11 08:44:00,226 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- editPreload(): userName= adminhostname= BB1NACEASTP01
2013-11-11 08:44:01,017 INFO 2013-11-11 08:44:01,017 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- ParameterNames in load()= BB1NACEASTP01
2013-11-11 08:44:01,017 INFO 2013-11-11 08:44:01,017 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- Inside load() API : hostNameBB1NACEASTP01 userName : admin
2013-11-11 08:44:01,017 INFO 2013-11-11 08:44:01,017 [http-443-1][] cpm.admin.infra.action.SupportBundleAction- Inside fetchFile() API : hostName: BB1NACEASTP01 userName : admin
2013-11-11 08:44:01,018 INFO 2013-11-11 08:44:01,018 [http-443-3][] cpm.admin.infra.action.SupportBundleAction- ParameterNames in sbfCreationPercentage()= BB1NACEASTP01
2013-11-11 08:44:01,021 INFO 2013-11-11 08:44:01,021 [http-443-3][] cpm.admin.infra.action.SupportBundleAction- Got hostAlias= BB1NACEASTP01
2013-11-11 08:44:01,021 INFO 2013-11-11 08:44:01,021 [http-443-3][] cpm.admin.infra.action.SupportBundleAction- Ping node: BB1NACEASTP01 for connectivity
2013-11-11 08:44:01,181 INFO 2013-11-11 08:44:01,181 [http-443-3][] cpm.admin.infra.action.SupportBundleAction- Received pingNode response : Node is reachable

I have two issues. 1) unable to update Acrobat XI Pro and 2) unable to register product

First issue: I have for the second time installed Acrobat xi pro and then click on "check for updates" from the help menu. And it shows that an update is available. But when I update it I am given the following error message:
Error 1328. Error applying patch to file C:\Config.Msi\PT669B.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor."
When I click on "details" I am sent to adobe's "update error" page. Which states the following for error 1328: Error applying patch to [filename]. It's likely that something else updated the file, and the patch can't modify it. For more information, contact your patch vendor.
I have tried uninstalling program and re-installing program but still get same error message from my attempt at updating. So I am not sure if program is update or not. And I do not know who my "patch vendor" is.
Second issue: Unable to register product with Adobe. Because the option to do so from the "help" menu which lists "product registration" is greyed/dimmed out. Therefore not giving me the ability to register this product. Please let me know what is causing this problem.

I am not sure, but will suggest some things to try. On the activate issue, it may be that your system already thinks it is activated and so you might try the deactivate and check. If that works, I would suggest you then uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove anything left of the Acrobat folder, reboot, and reinstall. Hopefully you can open Acrobat and activate. Then do the updates from the Help menu.

Unable to register service Error while deployment

Hi All,
I am getting the following error while deploying. I have attached the log details and the WSDL. Please suggest how to resolve this error.
2010-07-26T17:11:37.828+10:00] [soa_server1] [NOTIFICATION] [SOA-21046] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea] [arg: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: true] Calling coordinator to update composite. base composite: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea, new composite: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916, isForceDefault flag: true
[2010-07-26T17:11:38.254+10:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] Unable to register service.[[
oracle.webservices.provider.ProviderException: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:443)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:282)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:201)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:157)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:162)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.GeneratedMethodAccessor5638.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy262.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeRedeploy(StandaloneCompositeDeploymentCoordinatorImpl.java:62)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.overwriteExistingComposite(BaseDeployProcessor.java:375)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:222)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.getServiceName(ProviderConfigImpl.java:604)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:339)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:283)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:202)
... 43 more
[2010-07-26T17:11:38.265+10:00] [soa_server1] [NOTIFICATION] [SOA-21061] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: /deployed-composites] Removing label soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916 in namespace /deployed-composites of MDS storage
[2010-07-26T17:11:38.272+10:00] [soa_server1] [ERROR] [SOA-21037] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: Error during deployment: Update Failed: Unable to register service..] Sending back error message: Error during deployment: Update Failed: Unable to register service...
WSDL
<?xml version= '1.0' encoding= 'UTF-8' ?>
<wsdl:definitions
name="AVCadDataFeed"
targetNamespace="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:inp1="http://au/gov/vic/mas/ortd/Cadmsg"
xmlns:tns="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://au/gov/vic/mas/ortd/Cadmsg" schemaLocation="xsd/OdsCadMsg.xsd" />
</schema>
</wsdl:types>
<wsdl:message name="requestMessage">
<wsdl:part name="request" element="inp1:odsCadDataSet"/>
</wsdl:message>
<wsdl:portType name="livefeed_ptt">
<wsdl:operation name="livefeed">
<wsdl:input message="tns:requestMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:message name="headerMessage">
<wsdl:part name="header" element="inp1:customHeader"/>
</wsdl:message>
<wsdl:binding name="livefeed_pttSOAP11Binding" type="tns:livefeed_ptt">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="livefeed">
<soap:operation style="document"
soapAction="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed/livefeed"/>
<wsdl:input>
<soap:body use="literal" parts="request"/>
<soap:header use="literal" part="header"
message="tns:headerMessage"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="OrtdService">
<wsdl:port name="Ortd_Port" binding="tns:livefeed_pttSOAP11Binding">
<soap:address location="http://vdatdlsoa02.mas.vic.gov.au:8001/soa-infra/services/default/ProcessData/AVCadDataFeed"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks
Edited by: user5108636 on 26/07/2010 00:19

I is till throwing error after changing <wsdl:service name="AVCadDataFeed">Because still there are problems in WSDL. Error description gives the detail -
Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed and port livefeed_pt.
Make sure that port attribute has right value.
Also, what should be the value of the <soap:address location attribute in the service elementFrom Web Services Description Language (WSDL) 1.1 specification (http://www.w3.org/TR/wsdl#_soap:address) -
The SOAP address binding is used to give a port an address (a URI). A port using the SOAP binding MUST specify exactly one address. The URI scheme specified for the address must correspond to the transport specified by the soap:binding.
<definitions .... >
<port .... >
<binding .... >
<soap:address location="uri"/>
</binding>
</port>
</definitions>
Regards,
Anuj

Unable to register ORACLE_HOME into global orainventory

Hi,
I am unable to register my rdbms_oracle_home in global orainventory.
I am getting the velow error.
ERROR: Error in fixing ORACLE_HOME index
java.io.FileNotFoundException: /u04/Rel11i/devdb/9.2.0/inventory/ContentsXML/comps.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:91)
at java.io.FileInputStream.<init>(FileInputStream.java:54)
at oracle.apps.ad.util.OUISetup.fixHomeIdx(OUISetup.java:293)
at oracle.apps.ad.util.OUISetup.main(OUISetup.java:1347)
Removing OUI entries from the global inventory: /etc/oraInventory/ContentsXML/comps.xml
Registering the OUI component with local inventory...
ERROR: Exception while registering OUI 2.2 Component in the inventory.
java.io.FileNotFoundException: /u04/Rel11i/devdb/9.2.0/inventory/ContentsXML/comps.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:91)
at oracle.apps.ad.util.OUISetup.registerOuiComp(OUISetup.java:913)
at oracle.apps.ad.util.OUISetup.main(OUISetup.java:1349)
The error is due to missing "inventory" directory in RDBMS $ORACLE_HOME.
But the IAS$ORACLE_HOME is fine.
Is there any way to create this directory or we need to reinstall Oracle_home. if yes then how do we do that. Currently we are on 9.2.0.6. Do I need to reinstall it ?
Regards,
Farhat

So, what is the difference between this and using 'rapidwiz -techstack'? We never discussed this option in this thread ? Moreover what's the point in installing and redoing the work just for Inventory? Can you explain, if I can do the task in 5 min, why should I spend 50 min on it. Anyways that's my opinion.
Thanks

Windows XP - Unable to register with DCOM within the timeout limit

Just curious if anyone has run into iTunes server unable to register with DCOM within the given timeout limit?
Also quite often when I close iTunes, the process shutsdown but then 30sec - 2min iTunes opens its self right back up again. I ususally have to terminiate it from the Task Manager.
I am running the latest version of iTunes as of Sept 28th 1:30AM

have a look here http://www.grc.com/freeware/dcom.htm
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

LIBTUX_CAT:582: ERROR: Unable to register, registry table full

When we tried to call one of our service 100 times parallely we got an error as :-
181936.547.MLXWTAIXDEV!GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
182718.591.MLXWTAIXDEV!GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: Invalid registry table slot index passed, unable to unregister
Can somebody help us out why this error is coming.
The UBB configuration for same is as:-
MAXACCESSERS 350
MAXSERVERS 430
MAXSERVICES 1200
MAXGROUPS 100
MAXNETGROUPS 20
MAXMACHINES 256
MAXWSCLIENTS = 100
MAXACLCACHE = 10
MAXPENDINGBYTES = 100000
"TMMETADATA"
SRVGRP = "M_JOLT_GRP"
CLOPT = "-A -- -f /dev_app/dtux5/bin/reposfile"
RESTART= Y
SRVID = 1
GRACE = 3600
MAXGEN = 5
"GWWS"
SRVGRP = "M_JOLT_GRP"
CLOPT = "-A -- -iGWWS1"
RESTART= Y
SRVID = 2
The wsdf file is as
<Definition
xmlns="http://www.bea.com/Tuxedo/WSDF/2007"
name="EBATEST" wsdlNamespace="urn:salt.EBATEST.wsdl">
<WSBinding id="CURTEST_Binding">
<SOAP>
<AccessingPoints>
<Endpoint
address="http://10.16.114.145:7001/ebaapp" id="eba_HTTP_IN">
</Endpoint>
</AccessingPoints>
</SOAP>
<Servicegroup id="ebatestGrp">
<Service name="SCD_GET_TRD_UND"></Service>
</Servicegroup>
</WSBinding>
</Definition>
And salt file used for making saltconfig is as
<Deployment xmlns="http://www.bea.com/Tuxedo/SALTDEPLOY/2007">
<WSDF>
<Import location="/dev_app/dtux5/bin/example.wsdf"></Import>
</WSDF>
<WSGateway>
<GWInstance id="GWWS1">
<Inbound>
<Binding ref="EBATEST:CURTEST_Binding">
<Endpoint use="eba_HTTP_IN"></Endpoint>
</Binding>
</Inbound>
<Properties>
<Property name="enableSOAPValidation" value="true"/>
</Properties>
</GWInstance>
</WSGateway>
<System></System>
</Deployment>
The trace file as generated is as :-
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184541.718.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184541.722.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281396]
184541.723.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x1: SESSION: TIMEOUT VALUE IS [9999]:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: User id :mamu2:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Sssn id :281396:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Business id :B21001:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Business msg :Invalid User:The Login Id entered is not valid
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Service Name :SVC_SESSION
184541.727.MLXWTAIXDEV!svr_session.11043070.1.0: No Data in Session table for :mamu2:, :281396:
184541.728.MLXWTAIXDEV!GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
184541.729.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184700.522.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184700.522.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184700.523.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x2: SESSION: TIMEOUT VALUE IS [9999]:
184700.524.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x2: SESSION: SESSION [281397] IS VALID:
184700.538.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184700.538.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.692.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.693.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x3: SESSION: TIMEOUT VALUE IS [9999]:
184707.694.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x3: SESSION: SESSION [281397] IS VALID:
184707.710.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.711.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.718.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.719.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x4: SESSION: TIMEOUT VALUE IS [9999]:
184707.719.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x4: SESSION: SESSION [281397] IS VALID:
184707.732.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.732.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.738.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.738.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.739.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.739.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.739.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.739.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x5: SESSION: TIMEOUT VALUE IS [9999]:
184707.740.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x5: SESSION: SESSION [281397] IS VALID:
184707.756.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.756.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.770.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.770.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x6: SESSION: TIMEOUT VALUE IS [9999]:
184707.771.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x6: SESSION: SESSION [281397] IS VALID:
184707.798.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.799.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.807.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.808.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x7: SESSION: TIMEOUT VALUE IS [9999]:
184707.808.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x7: SESSION: SESSION [281397] IS VALID:
184707.821.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.821.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.831.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.832.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x8: SESSION: TIMEOUT VALUE IS [9999]:
184707.832.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x8: SESSION: SESSION [281397] IS VALID:
184707.843.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.843.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.856.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.856.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x9: SESSION: TIMEOUT VALUE IS [9999]:
184707.857.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x9: SESSION: SESSION [281397] IS VALID:
184707.869.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.869.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.876.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.877.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
184707.877.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
184707.899.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.899.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.907.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.907.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.907.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
184707.908.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
184707.918.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.919.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.932.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.933.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
184707.933.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
184707.945.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.945.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.957.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.958.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
184707.958.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
184707.973.MLXWTAIXDEV!GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: Invalid registry table slot index passed, unable to unregister
184707.973.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.973.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.980.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
Regards,
Anurag

Hi,
From the Tuxedo documentation, LIBTUX_CAT:582 is described as follows along with a recommended action.
>
582
ERROR: Unable to register, registry table full
Description
The BEA TUXEDO system was attempting to find a registry table slot for a process, but the registry table was full.
Action
Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, then reboot the application and try again.
>
So try increassing MAXACCESSERS and see if your problem goes away.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Unable to register my data warehouse in Service Manager

I have been trying to register my data warehouse but keep getting the same error message each time - "Invalid URI: the hostname could
not be parsed." I know the issue is on the ServiceManager database side of things, but there is not a lot of information related to this error message and the info I do find is unrelated to ServiceManager. I have gone as far as building a
brand new data warehouse server and reinstalling all of the data warehouse databases from scratch. It doesn't matter if I tried to register with the original data warehouse environment or the new environment, I get the same error message. I also
received a powershell command from Microsoft Support to help clean up any residual entries in the ServiceManager database that might be left over. At this point I'm at a loss on how to proceed. Anyone ever run into this issue?
Here's the event log message:
Unable to register Service Manager installation with Data Warehouse installation.
Data Warehouse Server: DW_SCSM
Service Manager Management Server: FlowSMRC
Exception: Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSServiceException: Invalid URI: The hostname could not be parsed.
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.executeHelper(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.Invoke(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.DWRegistration.Registration.DWRegistrationHelper.AcceptChanges(WizardMode wizardMode)
Also, I tried registering the data warehouse using powershell Add-SCDWMgmtGroup and get an error saying that Cannot associate Service Manager installation on scsm_server with Service Manager Data Warehouse installation on dw_server.

Just got additional information about this error. If you run the following query in SQL pointing to the ServiceManager database you should see the name of the Management Server. The query is:
select * from MT_Microsoft$SystemCenter$ResourceAccessLayer$SdkResourceStore
There is a column named Server_<some GUID> that should contain the Management Sever NetBIOS name. If it has some other name, run an update query to ensure the column has the NetBIOS name of the Management Server. Restart the SCSM Console
and retry the Database Registration again and it should succeed.
Microsoft has said that this is normally caused by either moving the database or database server to another server and the value is never updated.
Try registering the DW Server again and see if you have better luck.

Unable to register UWL

Hello
We are unable to register the UWL.
Following is the status of current configurations:
1. SSO works fine.
2. JCO to all systems are fine.
3. Unable to register the WebFlowConnector and AlterConnector
The WebFlowConnector has following settings:
System Alias: ECCCLNT500
Connector Type: WebFlowConnector
The error while registering WebFlowConnector is:
System ECCCLNT500: Tue Feb 16 20:14:03 EET 2010
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Tue Feb 16 20:14:03 EET 2010
: No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :ECCCLNT500
Is there any specific area to verify?
Another area, which I think is related, Connection Test for Connectors is also failing and gives SSO error. While SSO for users is activated and in working condition. The exact error while testing Connection Test for Connectors is:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards
Yash

Finally, we got it through.
We were doing two major mistakes, and until I myself looked into we were not able to identify the root cause of problem.
The two mistakes we were doing:
1. We had a user communication uwl_service in R/3 but it was missing in portal. Even after we created it, our administrator was logged in as Admin instead of uwl_service.
2. We goofed up the Connector settings:
System Administration -> System Landscape -> Browse to your System (double click on it) -> Select Connector from the Property Catalog
0. Use appropriate group in group. Check with BASIS consultant to know correct Group.
1. In the Logical System Name type the correct Logical System Name. Check with BASIS consultant to know correct Logical System Name.
2. In the message server, instead of Hostname type the IP address of your message server. Check with BASIS consultant to know correct IP Address.
3. Remote Host Type should be set to 3 if the message server is R/3.
4. SAP Client should be client to which you want to connect in Message Server.
5. SID should be the SID of Message Server.
6. Server Port should be the correct port for Message Server. Check with BASIS consultant to know correct Port Number.
7. Rest all settings should be left to defult.
8. To know if these settings are correct, along with BASIS guy perform the following: Logon to portal with an administrator user in EP whos communication user also exist in R/3. Go to System Administration -> Support -> SAP Application -> SAP Transaction -> Select any system, type any R/3 tcode and select SAP GUI for Windows. Click Go!! You should see the TCODE Output on Screen. If yes, you configurations are correct.
It worked for us, hope it works in future for someone else too.
Would like to thank Sandeep for excellent post: /message/6787312#6787312 [original link is broken] , which helped us troubleshoot to great extent.
Thanks
Yash

Unable to register web service in CF 7

I am unable to register a web service on admin without providing a username/password. the ws works well enough on other systems without even providing the username/password.
Any replies will be appreciated. thanks!

Wow, that's interesting (that you can invoke the web service without a username/password in CFML, but can't register it in the Admin).
Still, I want to understand what makes you want to do that (register it in the admin). You say, "I have a pool of web services to manage so I assume admin to be the best place to maintain them seeing on a broader perspective." I'm not sure what you mean by that.
Besides a little more explanation, I'd still ask: if you can't get around this (not saying that it should fail, but just if it can't be resolved), do you at least agree that you don't NEED to define the web services this way to use them. In fact, the opposite is true: if you invoke them in CFML (whether with createobject/cfobject/cfinvoke) that will populate this Admin page for each web service that's invoked, so you could "get around" the problem and have all your web services listed this way, for whatever value that offers.
But yes, it seems it should work the way you want to. I'm not denying that.
Just trying to help.
/charlie

I am unable to register my debit card after creating my apple ID. Whenever i click enter after filling all the debit card details, it shows that, "your payement method has been declined". Please help me people, why is it so.?

I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!

The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store.

MSDTC connection manager is unable to register with RPC

HI
I am using the Windowserver 2012. We mount a WCF application , the server is working fine.. sundenly this error occurred in production environment. what might be the reason. What should i check in my server? how to fix this ? I navigate to components
and click distributed coordianator nothing comes in the list like LOCAL DTC. I am very confused. it is not happening in any other sites. This server is database server for my application
Thank you.
Log Name:      Application
Source:        Microsoft-Windows-MSDTC
Date:          9/20/2014 9:00:41 AM
Event ID:      4358
Task Category: MSDTC Proxy
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IO-DB1
Description:
The MS DTC Connection Manager is unable to register with RPC to use one of LRPC, TCP/IP, or UDP/IP.
Please ensure that RPC is configured properly. If "ServerTcpPort"
registry key is configured(DWORD value under the HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC for local DTC instance or under cluster
hive for clustered DTC instance), please verify if the configured port is valid and the port is not already in use by a different component.
Error Specifics:hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe"
"C:\Windows\system32\comexp.msc" , Pid: 956
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MSDTC" Guid="{719BE4ED-E9BC-4DD8-A7CF-C85CE8E4975D}" EventSourceName="MSDTC" />
    <EventID Qualifiers="49152">4358</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-20T02:00:41.000000000Z" />
    <EventRecordID>19391</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>IO-DB1</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe" "C:\Windows\system32\comexp.msc" , Pid: 956</Data>
    <Binary>4D005300440054004300</Binary>
</EventData>
</Event>
Thanks & Regards Manoj

Hi Partner,
Thank you for your post.
From your description, I see that the current issue is you notice Event ID 4358 error (source: Microsoft-Windows-MSDTC) logged in Application log.
Please let me know if I misunderstand anything or you have any additional information.
Firstly, could you help clarify that what operation you are performing while the issue occur? It would be nice if you can provide a GUI error message if any.
Currently, based on the error message and my research, some incorrect register key about RPC dynamic port resulting in MSDTC behaves unexpectedly might cause such symptom.
If that is the case, let's take the following steps to check our issue.
[Note: As the operation is related to the registry key components, I suggest we backup the entries firstly before performing the steps]
1. Delete all the register keys about RPC dynamic port you inserted manually.
2. Configure the ports via UI.
3. Reboot the server.
Please let me know if there is any update. Thank you for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Services not starting after upgrading the secondary acs 4.0.1

Hi
I upgraded 2 ACS ver 3.3.2 servers to ver 4.0.1 the upgrade worked perfectly fine but when I restarted the secondary acs, the ACS services are on starting status and CSlogs service shows stopping.
any idea why?
thanks in advance.

Hi,
Seems link hitting CSCsc95237. You can check following link for further information.
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsc95237&Submit=Search
-Parm

I am unable to register my iPhone on iTunes

After 3 days I am still unable to register my iPhone on iTunes. Everytime I try to start the process I receive the message "An error has occured: please try again later".
I have done all of the software updates for iTunes, iPhone, confirmed updated terms and conditions, tried to register as if I didn't have an Apple ID, etc....all to no avail. Help.

Register it here:
http://www.apple.com/register/

Unable to register a secondary ACS 5.2 appliance

Similar Messages

Maybe you are looking for