Unable to register both BRI ports of C887VA-V using MGCP (Bug : CSCuj54849)

Hi !
Does anyone know if this issue has ben solved in CUCM V10 ?
Thank you,
Regards,
Christian.

Hi folks !
I have already created a case with TAC and your answers are accurate. It seems obvious that Cisco has other priorities than developing a "small" router in the CUCM environment!
Regards.
Christian.

Similar Messages

Unable to register both BRI ports of C887VA-V using MGCP (CSCuj54849)

Hi,
Does anybody know if this problem was solved?
Thank you,
Best regards,
Christian.

Hi folks !
I have already created a case with TAC and your answers are accurate. It seems obvious that Cisco has other priorities than developing a "small" router in the CUCM environment!
Regards.
Christian.

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Unable to register system with sconadm

I'm trying to get smpatch working within my environment so I can get our patch management/automation under control. I've been able to successfully get this working on 1 system. When attempting to get this working on a second system, I have had nothing but issues. Any help with this would be greatly appreciated.
1. I have followed both ID 1288579.1 and ID 1311733.1 to a T.
2. I do have a valid MOS account, and to take it a step further, I have had my account set to Admin on the support contract I have.
3. I've verified that my account can download patches. I tested with PCA and it can retrieve patches without issue with me account.
4. my suc.sh output:
| Sun Update Collector V 1.0.10 |
Solaris release:
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
Solaris Kernel: Generic_137138-09
Machine Type: i86pc
Platform: i86pc
Software Cluster:
CLUSTER=SUNWCall
Environment:
HOME=/
HZ=
LOGNAME=root
MAIL=/var/mail/root
OLDPWD=/usr/jdk
PATH=/usr/sbin:/usr/bin
PWD=/export/home/bbranch
SHELL=/sbin/sh
SHLVL=1
TERM=vt100
TZ=US/Central
_=./suc.sh
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Sun UC package information:
Sun UC package chk:
..done..
Sun UC patch revision:
120336-04
121082-06
121082-08
121119-13
121119-19
121454-02
123004-03
123004-04
123006-07
123006-09
123631-03
123896-05
123896-25
124187-07
137138-09
Patch install dates:
Note: The dates listed and patches listed may differ due to patches included with the OS release installed.
drwxr-xr-- 2 root root 512 2011-09-21 13:47:44.093500000 -0500 121082-08
drwxr-xr-- 2 root root 512 2011-09-21 11:04:00.643649000 -0500 121119-19
drwxr-xr-- 2 root root 512 2011-09-21 13:04:38.208182000 -0500 123004-04
drwxr-xr-- 2 root root 512 2011-09-21 11:04:23.198060000 -0500 123006-09
drwxr-xr-- 2 root root 512 2011-09-21 11:11:22.682756000 -0500 123896-25
Java versions:
System default:
java version "1.5.0_22"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_22-b03)
Java HotSpot(TM) Client VM (build 1.5.0_22-b03, mixed mode)
Java 5:
java version "1.5.0_22"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_22-b03)
Java HotSpot(TM) Client VM (build 1.5.0_22-b03, mixed mode)
Java 6:
Unable to locate JRE meeting specification "1.6*"
Java used by smpatch and updatemanager:
/usr/sbin/pprosvc:JAVACMD="/usr/jdk/latest/bin/java -version:1.5+"
/bin/updatemanager:JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5+"
Cacao Java version:
java-home=/usr/jdk/latest
Cacao Base Directories:
cacao.install.rt.base.dir=/
cacao.install.etc.base.dir=/
Cacao all settings:
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11162
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags= -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8 -Djava.endorsed.dirs=/usr/lib/cacao/lib/endorsed
micro-agent=false
java-home=/usr/jdk/latest
jdmk-home=/usr/share/lib/jdmk
nss-lib-home=/usr/lib/mps/secv1
nss-tools-home=/usr/sfw/bin
retries=4
log-file-limit=1000000
log-file-count=3
log-file-append=true
enable-instrumentation=false
user=root
group=sys
network-bind-address=127.0.0.1
watchdog-heartbeat-timeout=60
Cacao Modules:
List of modules registered:
com.sun.cacao.agent_logging 1.0
com.sun.cacao.cached_connector 2.2
com.sun.cacao.command_stream_adaptor 1.0
com.sun.cacao.dtrace 1.0
com.sun.cacao.efd 2.2
com.sun.cacao.instrum 1.0
com.sun.cacao.invoker 1.0
com.sun.cacao.mib2simple 1.0
com.sun.cacao.rbac 2.1
com.sun.cacao.rmi 1.0
com.sun.cacao.session 2.2
com.sun.cacao.snmpv3_adaptor 1.0
com.sun.cacao.watchdog.heartbeat 1.0
com.sun.cacao.watchdog.probe 1.0
com.sun.scn.SolarisAssetModule 1.0
com.sun.scn.base.SCNBase 1.0
com.sun.scn.offering.ProductRegistration 1.0
com.sun.scn.offering.SoftwareUpdate 1.0
com.sun.scn.sensor.Sensor_Module 1.0
ls Cacao directories:
/etc/cacao/instances/default:
total 6
drwxr-xr-x 2 root sys 512 Sep 21 13:04 modules
drwxr-xr-x 3 root sys 512 Sep 21 11:11 private
drwxr-xr-x 5 root sys 512 Sep 21 10:12 security
/etc/cacao/instances/default/modules:
total 24
-rw-r----- 1 root sys 2581 Mar 27 2006 com.sun.scn.base.SCNBase.xml
-rw-r----- 1 root sys 2921 Dec 3 2007 com.sun.scn.offering.ProductRegistration.xml
-rw-r--r-- 1 root sys 2789 Dec 3 2007 com.sun.scn.offering.SWUPRegistration.xml
-rw-r----- 1 root sys 1307 Mar 17 2010 com.sun.scn.sam.SolarisAssetModule.xml
-rw-r----- 1 root sys 1010 Mar 16 2006 com.sun.scn.sensor.Sensor_Module.xml
/etc/cacao/instances/default/private:
total 26
-rw-r--r-- 1 root sys 5386 Sep 22 09:57 cacao.properties
-rw-r--r-- 1 root sys 559 Sep 21 10:12 logger.properties
drwxr-xr-x 2 root sys 3072 Sep 21 11:11 modules
-rw-r--r-- 1 root sys 2196 Sep 21 11:11 svc_cacao.xml
/etc/cacao/instances/default/private/modules:
total 82
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.auth.session.2.2.2.properties
-rw-r--r-- 1 root sys 1435 Sep 21 11:11 com.sun.cacao.auth.session.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.cached_connector.2.2.2.properties
-rw-r--r-- 1 root sys 1033 Sep 21 11:11 com.sun.cacao.cached_connector.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.command_stream_adaptor.2.2.2.properties
-rw-r--r-- 1 root sys 1005 Sep 21 11:11 com.sun.cacao.command_stream_adaptor.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 10:12 com.sun.cacao.dtrace.properties
-rw-r--r-- 1 root sys 957 Sep 21 10:12 com.sun.cacao.dtrace.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.efd.2.2.2.properties
-rw-r--r-- 1 root sys 1115 Sep 21 11:11 com.sun.cacao.efd.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.instrum.2.2.2.properties
-rw-r--r-- 1 root sys 1025 Sep 21 11:11 com.sun.cacao.instrum.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.invoker.2.2.2.properties
-rw-r--r-- 1 root sys 1086 Sep 21 11:11 com.sun.cacao.invoker.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.logging_manager.2.2.2.properties
-rw-r--r-- 1 root sys 903 Sep 21 11:11 com.sun.cacao.logging_manager.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.mib2simple.2.2.2.properties
-rw-r--r-- 1 root sys 2816 Sep 21 11:11 com.sun.cacao.mib2simple.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.rbac.2.2.2.properties
-rw-r--r-- 1 root sys 1295 Sep 21 11:11 com.sun.cacao.rbac.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.rmi.2.2.2.properties
-rw-r--r-- 1 root sys 960 Sep 21 11:11 com.sun.cacao.rmi.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.snmpv3_adaptor.2.2.2.properties
-rw-r--r-- 1 root sys 2049 Sep 21 11:11 com.sun.cacao.snmpv3_adaptor.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.watchdog.heartbeat.2.2.2.properties
-rw-r--r-- 1 root sys 2559 Sep 21 11:11 com.sun.cacao.watchdog.heartbeat.2.2.2.xml
-rw-r--r-- 1 root sys 56 Sep 21 11:11 com.sun.cacao.watchdog.probe.2.2.2.properties
-rw-r--r-- 1 root sys 1757 Sep 21 11:11 com.sun.cacao.watchdog.probe.2.2.2.xml
/etc/cacao/instances/default/security:
total 8
drwxr-xr-x 2 root sys 512 Sep 21 10:12 jsse
drwxr-xr-x 5 root sys 512 Sep 21 10:12 nss
-rw------- 1 root sys 197 Sep 21 10:12 password
drwxr-xr-x 2 root sys 512 Sep 22 09:57 snmp
/etc/cacao/instances/default/security/jsse:
total 8
-rw-r--r-- 1 root sys 639 Sep 21 10:12 agent.cert
-rw-r--r-- 1 root sys 1630 Sep 21 10:12 keystore
-rw-r--r-- 1 root sys 486 Sep 21 10:12 truststore
/etc/cacao/instances/default/security/nss:
total 6
drwxr-xr-x 2 root sys 512 Sep 21 10:12 localca
drwxr-xr-x 2 root sys 512 Sep 21 10:12 unknown
drwxr-xr-x 2 root sys 512 Sep 21 10:12 wellknown
/etc/cacao/instances/default/security/nss/localca:
total 226
-rw-r--r-- 1 root sys 65536 Sep 21 10:12 cert8.db
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 key3.db
-rw-r--r-- 1 root sys 635 Sep 21 10:12 localca.cert
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 secmod.db
/etc/cacao/instances/default/security/nss/unknown:
total 208
-rw-r--r-- 1 root sys 65536 Sep 21 10:12 cert8.db
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 key3.db
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 secmod.db
/etc/cacao/instances/default/security/nss/wellknown:
total 226
-rw-r--r-- 1 root sys 65536 Sep 21 10:12 cert8.db
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 key3.db
-rw-r--r-- 1 root sys 32768 Sep 21 10:12 secmod.db
-rw-r--r-- 1 root sys 643 Sep 21 10:12 wellknown.cert
/etc/cacao/instances/default/security/snmp:
total 8
-rw------- 1 root sys 884 Sep 21 10:12 jdmk.acl
-rw------- 1 root sys 1110 Sep 22 09:57 jdmk.security
-rw------- 1 root sys 664 Sep 21 10:12 jdmk.uacl
/usr/lib/cacao/lib/tools/template:
total 8
drwxr-xr-x 5 root sys 512 Sep 21 09:49 config
drwxr-xr-x 2 root sys 1536 Sep 21 11:11 modules
drwxr-xr-x 2 root sys 512 Sep 21 11:11 startup
/usr/lib/cacao/lib/tools/template/config:
total 6
drwxr-xr-x 2 root sys 512 Sep 21 09:49 modules
drwxr-xr-x 3 root sys 512 Sep 21 11:11 private
drwxr-xr-x 3 root sys 512 Sep 21 09:49 security
/usr/lib/cacao/lib/tools/template/config/modules:
total 0
/usr/lib/cacao/lib/tools/template/config/private:
total 16
-rw-r--r-- 1 root sys 6045 Dec 7 2010 cacao.properties
-rw-r--r-- 1 root sys 565 Dec 7 2010 logger.properties
drwxr-xr-x 2 root sys 512 Sep 21 09:49 modules
/usr/lib/cacao/lib/tools/template/config/private/modules:
total 0
/usr/lib/cacao/lib/tools/template/config/security:
total 2
drwxr-xr-x 2 root sys 512 Sep 21 11:11 snmp
/usr/lib/cacao/lib/tools/template/config/security/snmp:
total 6
-rw-r--r-- 1 root sys 896 Dec 7 2010 jdmk.acl
-rw-r--r-- 1 root sys 1005 Dec 7 2010 jdmk.security
-rw-r--r-- 1 root sys 680 Dec 7 2010 jdmk.uacl
/usr/lib/cacao/lib/tools/template/modules:
total 54
-rw-r--r-- 1 root sys 1435 Dec 7 2010 com.sun.cacao.auth.session.2.2.2.xml
-rw-r--r-- 1 root sys 1033 Dec 7 2010 com.sun.cacao.cached_connector.2.2.2.xml
-rw-r--r-- 1 root sys 1005 Dec 7 2010 com.sun.cacao.command_stream_adaptor.2.2.2.xml
-rw-r--r-- 1 root sys 957 Feb 15 2007 com.sun.cacao.dtrace.xml
-rw-r--r-- 1 root sys 1115 Dec 7 2010 com.sun.cacao.efd.2.2.2.xml
-rw-r--r-- 1 root sys 1025 Dec 7 2010 com.sun.cacao.instrum.2.2.2.xml
-rw-r--r-- 1 root sys 1086 Dec 7 2010 com.sun.cacao.invoker.2.2.2.xml
-rw-r--r-- 1 root sys 903 Dec 7 2010 com.sun.cacao.logging_manager.2.2.2.xml
-rw-r--r-- 1 root sys 2816 Dec 7 2010 com.sun.cacao.mib2simple.2.2.2.xml
-rw-r--r-- 1 root sys 1295 Dec 7 2010 com.sun.cacao.rbac.2.2.2.xml
-rw-r--r-- 1 root sys 960 Dec 7 2010 com.sun.cacao.rmi.2.2.2.xml
-rw-r--r-- 1 root sys 2049 Dec 7 2010 com.sun.cacao.snmpv3_adaptor.2.2.2.xml
-rw-r--r-- 1 root sys 2559 Dec 7 2010 com.sun.cacao.watchdog.heartbeat.2.2.2.xml
-rw-r--r-- 1 root sys 1757 Dec 7 2010 com.sun.cacao.watchdog.probe.2.2.2.xml
/usr/lib/cacao/lib/tools/template/startup:
total 14
-rw-r--r-- 1 root sys 3770 Dec 7 2010 cacao
-rw-r--r-- 1 root sys 2164 Dec 7 2010 svc_cacao.xml
checking Cacao ports:
*.111 Idle
127.0.0.1.11161 Idle
*.111 *.* 0 0 49152 0 LISTEN
127.0.0.1.11164 *.* 0 0 49152 0 LISTEN
127.0.0.1.11163 *.* 0 0 49152 0 LISTEN
127.0.0.1.11162 *.* 0 0 49152 0 LISTEN
checking Cacao java process:
root 3225 0.3 4.011263241060 ? S 09:57:06 0:03 /usr/jdk/latest/bin/java -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8 -Djava.endorsed.dirs=/usr/lib/cacao/lib/endorsed -classpath /usr/share/lib/jdmk/jdmkrt.jar:/usr/share/lib/jdmk/jmxremote_optional.jar:/usr/lib/cacao/lib/cacao_cacao.jar:/usr/lib/cacao/lib/cacao_j5core.jar:/usr/lib/cacao/lib/bcprov-jdk14.jar -Djavax.management.builder.initial=com.sun.jdmk.JdmkMBeanServerBuilder -Dcacao.print.status=true -Dcacao.config.dir=/etc/cacao/instances/default -Dcacao.monitoring.mode=smf -Dcom.sun.cacao.ssl.keystore.password.file=/etc/cacao/instances/default/security/password com.sun.cacao.container.impl.ContainerPrivate
root 1325 0.2 1.68425216216 ? S 09:42:59 0:02 /usr/jdk/latest/bin/java -version:1.5+ -jar /usr/lib/patch/swupna.jar -wait
noaccess 710 0.1 11.6196796119900 ? S 09:08:02 0:13 /usr/java/bin/java -server -Xmx128m -XX:+UseParallelGC -XX:ParallelGCThreads=4 -classpath /usr/share/webconsole/private/container/bin/bootstrap.jar:/usr/share/webconsole/private/container/bin/commons-logging.jar:/usr/share/webconsole/private/container/bin/log4j.jar:/usr/java/lib/tools.jar:/usr/java/jre/lib/jsse.jar -Djava.security.manager -Djava.security.policy==/var/webconsole/domains/console/conf/console.policy -Djavax.net.ssl.trustStore=/var/webconsole/domains/console/conf/keystore.jks -Djava.security.auth.login.config=/var/webconsole/domains/console/conf/consolelogin.conf -Dcatalina.home=/usr/share/webconsole/private/container -Dcatalina.base=/var/webconsole/domains/console -Dcom.sun.web.console.home=/usr/share/webconsole -Dcom.sun.web.console.conf=/etc/webconsole/console -Dcom.sun.web.console.base=/var/webconsole/domains/console -Dcom.sun.web.console.logdir=/var/log/webconsole/console -Dcom.sun.web.console.native=/usr/lib/webconsole -Dcom.sun.web.console.appbase=/var/webconsole/domains/console/webapps -Dcom.sun.web.console.secureport=6789 -Dcom.sun.web.console.unsecureport=6788 -Dcom.sun.web.console.unsecurehost=127.0.0.1 -Dwebconsole.default.file=/etc/webconsole/console/default.properties -Dwebconsole.config.file=/etc/webconsole/console/service.properties -Dcom.sun.web.console.startfile=/var/webconsole/tmp/console_start.tmp -Djava.awt.headless=true -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog org.apache.catalina.startup.Bootstrap start
root 3224 0.0 0.2 1864 1184 ? S 09:57:06 0:00 /usr/lib/cacao/lib/tools/launch -w /var/cacao/instances/default -L 16384 -A /usr/lib/cacao/lib/tools/proc_analysis -W /var/cacao/instances/default -T 300 -P /var/run/cacao/instances/default/run/hb.pipe -f -U root -G sys -- /usr/jdk/latest/bin/java -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8 -Djava.endorsed.dirs=/usr/lib/cacao/lib/endorsed -classpath /usr/share/lib/jdmk/jdmkrt.jar:/usr/share/lib/jdmk/jmxremote_optional.jar:/usr/lib/cacao/lib/cacao_cacao.jar:/usr/lib/cacao/lib/cacao_j5core.jar:/usr/lib/cacao/lib/bcprov-jdk14.jar -Djavax.management.builder.initial=com.sun.jdmk.JdmkMBeanServerBuilder -Dcacao.print.status=true -Dcacao.config.dir=/etc/cacao/instances/default -Dcacao.monitoring.mode=smf -Dcom.sun.cacao.ssl.keystore.password.file=/etc/cacao/instances/default/security/password com.sun.cacao.container.impl.ContainerPrivate
copying cacao files to /tmp/suc-cacao...
done.
Solaris 10 cacao instances:
STATE NSTATE STIME CTID FMRI
online - 9:57:07 88 svc:/application/management/common-agent-container-1:default
9:57:06 3224 launch
9:57:06 3225 java
Full list of cacao SMF service(s):
fmri svc:/application/management/common-agent-container-1:default
name Cacao, a common Java container for JDMK/JMX based management solution
enabled true (temporary)
state online
next_state none
state_time Thu Sep 22 09:57:07 2011
logfile /var/svc/log/application-management-common-agent-container-1:default.log
restarter svc:/system/svc/restarter:default
contract_id 88
dependency require_all/none svc:/system/filesystem/local (online)
dependency require_all/none svc:/network/initial (online)
dependency require_all/none svc:/milestone/multi-user (online)
Services in maintenance/disabled state:
svc:/system/pkgserv:default (Flush package command database to disk (see pkgadm(1m)).)
State: offline since Thu Sep 22 09:07:25 2011
Reason: Dependency file://localhost/usr/sadm/install/bin/pkgserv is absent.
See: http://sun.com/msg/SMF-8000-E2
Impact: This service is not running.
All ccr properties:
18:
cns.assetid:
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
cns.security.password:
dAw5y36sZJoC+XZR504J4YfvVN8gcxGUYp1bCb8i7x21
cns.security.privatekey:
cns.security.publickey:
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
patchsvr not installed.
Entitlement:
smpatch settings:
patchpro.backout.directory     -     ""
patchpro.baseline.directory     -     /var/sadm/spool
patchpro.download.directory     -     /var/sadm/spool
patchpro.install.types          -     rebootafter:reconfigafter:standard
patchpro.patch.source          -     https://getupdates.oracle.com/
patchpro.patchset          -     current3
patchpro.proxy.host          -     ""
patchpro.proxy.passwd          ****     ****
patchpro.proxy.port          -     8080
patchpro.proxy.user          -     ""
debug smpatch analyze:
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a GUUS server
... ... Hostname of URL is getupdates.oracle.com
... ... Filename of URL is /xml/motd.xml
... ... File path portion of URL is /xml/motd.xml
Defining request header : IF_MODIFIED_SINCE... valueWed Dec 31 18:00:00 CST 1969
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 401
((HttpURLConnection)connection).getResponseMessage() : Authorization Required
Error: Unable to download document : "xml/motd.xml"
Cannot connect to retrieve motd.xml: Authorization Required
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a GUUS server
... ... Hostname of URL is getupdates.oracle.com
... ... Filename of URL is /detector/detectors.jar
... ... File path portion of URL is /detector/detectors.jar
Effective proxy host : ""
Effective proxy port : "8080"
Effective proxy user : ""
... Submitting download request against a GUUS server
... ... Hostname of URL is getupdates.oracle.com
... ... Filename of URL is /database/current3.zip
... ... File path portion of URL is /database/current3.zip
Defining request header : IF_MODIFIED_SINCE... valueWed Dec 31 18:00:00 CST 1969
Defining request header : IF_MODIFIED_SINCE... valueWed Dec 31 18:00:00 CST 1969
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 401
((HttpURLConnection)connection).getResponseMessage() : Authorization Required
... Caught IO Exception.
((HttpURLConnection)connection).getResponseCode() : 401
((HttpURLConnection)connection).getResponseMessage() : Authorization Required
Failure: Cannot connect to retrieve current3.zip: Authorization Required
ls /var/sadm/spool:
/var/sadm/spool:
total 2
drwxr-xr-x 5 root sys 512 Sep 22 10:00 cache
/var/sadm/spool/cache:
total 6
drwxr-xr-x 2 root root 512 Sep 22 10:00 Database
drwxr-xr-x 3 root sys 512 Sep 21 09:54 updatemanager
drwxr-xr-x 2 root root 512 Sep 22 10:00 xml
/var/sadm/spool/cache/Database:
total 0
/var/sadm/spool/cache/updatemanager:
total 2
drwxr-xr-x 2 root sys 512 Sep 21 09:54 analysis.results
/var/sadm/spool/cache/updatemanager/analysis.results:
total 0
/var/sadm/spool/cache/xml:
total 0
copying sconadm log files to /tmp/suc-sconadm...
done.
checking certificate...
Enter keystore password:
***************** WARNING WARNING WARNING *****************
* The integrity of the information stored in your keystore *
* has NOT been verified! In order to verify its integrity, *
* you must provide your keystore password. *
***************** WARNING WARNING WARNING *****************
Keystore type: jks
Keystore provider: SUN
Your keystore contains 11 entries
Alias name: smirootcacert
Creation date: Jun 18, 2002
Entry type: trustedCertEntry
Owner: CN=Sun Microsystems Inc Root CA, O=Sun Microsystems Inc, C=US
Issuer: CN=GTE CyberTrust Root, O=GTE Corporation, C=US
Serial number: 200014a
Valid from: Tue Nov 07 16:39:00 CST 2000 until: Thu Nov 07 17:59:00 CST 2002
Certificate fingerprints:
     MD5: D8:B6:68:D4:6B:04:B9:5A:EB:34:23:54:B8:F3:97:8C
     SHA1: BD:D9:0B:DA:AE:91:5F:33:C4:3D:10:E3:77:F0:45:09:4A:E8:A2:98
Alias name: updateserver.sun.com
Creation date: Apr 20, 2004
Entry type: trustedCertEntry
Owner: CN=updateserver.sun.com, OU=Solaris Patch Server, O="Sun Microsystems, Inc.", L=Santa Clara, ST=California, C=US
Issuer: CN=updateserver.sun.com, OU=Solaris Patch Server, O="Sun Microsystems, Inc.", L=Santa Clara, ST=California, C=US
Serial number: 4085ad7d
Valid from: Tue Apr 20 18:08:45 CDT 2004 until: Fri Apr 18 18:08:45 CDT 2014
Certificate fingerprints:
     MD5: C7:0D:9B:84:B2:E0:57:FA:F4:D1:0C:2E:F3:0E:68:DF
     SHA1: 48:B3:6B:35:AB:15:FE:BF:C5:B9:FF:39:F9:7E:FF:BB:C2:07:9B:7A
Alias name: gtecybertrustglobalca
Creation date: Feb 6, 2006
Entry type: trustedCertEntry
Owner: CN=GTE CyberTrust Global Root, OU="GTE CyberTrust Solutions, Inc.", O=GTE Corporation, C=US
Issuer: CN=GTE CyberTrust Global Root, OU="GTE CyberTrust Solutions, Inc.", O=GTE Corporation, C=US
Serial number: 1a5
Valid from: Wed Aug 12 19:29:00 CDT 1998 until: Mon Aug 13 18:59:00 CDT 2018
Certificate fingerprints:
     MD5: CA:3D:D3:68:F1:03:5C:D0:32:FA:B8:2B:59:E8:5A:DB
     SHA1: 97:81:79:50:D8:1C:96:70:CC:34:D8:09:CF:79:44:31:36:7E:F4:74
Alias name: verisignclass3g2ca
Creation date: Feb 6, 2006
Entry type: trustedCertEntry
Owner: OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 3 Public Primary Certification Authority - G2, O="VeriSign, Inc.", C=US
Issuer: OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 3 Public Primary Certification Authority - G2, O="VeriSign, Inc.", C=US
Serial number: 7dd9fe07cfa81eb7107967fba78934c6
Valid from: Sun May 17 19:00:00 CDT 1998 until: Tue Aug 01 18:59:59 CDT 2028
Certificate fingerprints:
     MD5: A2:33:9B:4C:74:78:73:D4:6C:E7:C1:F3:8D:CB:5C:E9
     SHA1: 85:37:1C:A6:E5:50:14:3D:CE:28:03:47:1B:DE:3A:09:E8:F8:77:0F
Alias name: smicacert
Creation date: Jun 18, 2002
Entry type: trustedCertEntry
Owner: O=Sun Microsystems Inc, CN=Sun Microsystems Inc CA (Class B)
Issuer: CN=Sun Microsystems Inc Root CA, O=Sun Microsystems Inc, C=US
Serial number: 1000006
Valid from: Mon Nov 13 13:23:10 CST 2000 until: Fri Nov 13 13:23:10 CST 2009
Certificate fingerprints:
     MD5: B4:1F:E1:0D:80:7D:B1:AB:15:5C:78:CB:C8:8F:CE:37
     SHA1: 1E:38:11:02:F0:5D:A3:27:5C:F9:6E:B1:1F:C4:79:95:E9:6E:D6:DF
Alias name: patchsigning3
Creation date: Dec 9, 2008
Entry type: trustedCertEntry
Owner: CN=patchsign 20081125, OU=Class B, OU=Corporate Object Signing, O=Sun Microsystems Inc
Issuer: CN=Object Signing CA, OU=Class 2 OnSite Subscriber CA, OU=VeriSign Trust Network, O=Sun Microsystems Inc
Serial number: c6c945f7361c6aa3c520502b3db45a7
Valid from: Mon Nov 24 18:00:00 CST 2008 until: Fri Nov 25 17:59:59 CST 2011
Certificate fingerprints:
     MD5: 37:FD:5B:76:06:29:65:DB:47:D8:A5:AB:E7:D7:2C:08
     SHA1: 30:C7:C3:AF:85:00:8F:3B:41:DC:55:A3:99:53:E4:00:D8:97:D7:01
Alias name: patchsigning2
Creation date: Feb 8, 2006
Entry type: trustedCertEntry
Owner: CN=Patch (No version), OU=Class B, OU=Corporate Object Signing, O=Sun Microsystems Inc
Issuer: CN=Object Signing CA, OU=Class 2 OnSite Subscriber CA, OU=VeriSign Trust Network, O=Sun Microsystems Inc
Serial number: 3ed0ec9de0eed991b93f09d331d05e93
Valid from: Tue Jan 24 18:00:00 CST 2006 until: Sat Jan 24 17:59:59 CST 2009
Certificate fingerprints:
     MD5: 07:5C:E4:4F:4C:DC:4D:D5:D0:A8:A8:16:C8:DB:37:5F
     SHA1: A2:A8:17:32:2C:C4:7E:DE:8E:67:70:5E:08:2B:91:E9:8A:48:8C:05
Alias name: patchsigning
Creation date: Jun 18, 2002
Entry type: trustedCertEntry
Owner: CN=Enterprise Services Patch Management, O=Sun Microsystems Inc
Issuer: O=Sun Microsystems Inc, CN=Sun Microsystems Inc CA (Class B)
Serial number: 1400007b
Valid from: Mon Sep 24 15:38:53 CDT 2001 until: Sun Sep 24 15:38:53 CDT 2006
Certificate fingerprints:
     MD5: 6F:63:51:C4:3D:92:C5:B9:A7:90:2F:FB:C0:68:66:16
     SHA1: D0:8D:7B:2D:06:AF:1F:37:5C:0D:1B:A0:B3:CB:A0:2E:90:D6:45:0C
Alias name: smirootcacert2
Creation date: Oct 21, 2002
Entry type: trustedCertEntry
Owner: CN=Sun Microsystems Inc Root CA, O=Sun Microsystems Inc, C=US
Issuer: CN=GTE CyberTrust Root, O=GTE Corporation, C=US
Serial number: 40002ae
Valid from: Wed Oct 16 10:45:00 CDT 2002 until: Sat Oct 16 18:59:00 CDT 2004
Certificate fingerprints:
     MD5: 54:E3:D1:E4:79:B4:17:23:65:B4:F9:14:AD:C6:4A:FE
     SHA1: 90:F1:AB:87:AE:A0:4C:1F:AF:43:60:DE:5D:A8:0E:D8:CE:E7:06:AE
Alias name: getupdates.oracle.com
Creation date: Apr 25, 2011
Entry type: trustedCertEntry
Owner: CN=*.oracle.com, OU=Terms of use at www.verisign.com/rpa (c)10, OU=Global IT, O=Oracle Corporation, L=Redwood Shores, ST=California, C=US
Issuer: OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign, OU=VeriSign International Server CA - Class 3, OU="VeriSign, Inc.", O=VeriSign Trust Network
Serial number: 7854c9713b40a03d934e4b1b7f266170
Valid from: Mon Apr 12 19:00:00 CDT 2010 until: Thu May 05 18:59:59 CDT 2011
Certificate fingerprints:
     MD5: 03:CB:5F:B8:58:40:23:03:7E:89:A7:49:AF:06:7C:23
     SHA1: 63:95:E0:5C:87:42:8E:38:95:73:EE:03:1C:50:48:FE:43:8F:DC:8C
Alias name: oracle.com
Creation date: Apr 25, 2011
Entry type: trustedCertEntry
Owner: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Serial number: 641be820ce020813f32d4d2d95d67e67
Valid from: Sun Feb 07 18:00:00 CST 2010 until: Fri Feb 07 17:59:59 CST 2020
Certificate fingerprints:
     MD5: BA:B0:65:B4:3B:9C:E8:40:30:21:7D:C5:C6:CD:3F:EB
     SHA1: B1:8D:9D:19:56:69:BA:0F:78:29:51:75:66:C2:5F:42:2A:27:71:04
checking network settings...
141.146.44.51     updates.oraclegha.com getupdates.oracle.com updates.oracle.com
164.58.129.138     a248.e.akamai.net
164.58.129.143     a248.e.akamai.net
141.146.44.51     updates.oraclegha.com cns-services.oracle.com updates.oracle.com

Sampath,
You can use one of the following workarounds :
1. Install redhat-release package from AS
or
2. Edit /etc/redhat-release
change (for example):
Red Hat Enterprise Linux ES release 4 (Nahant Update 4)
to:
Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
The next version of "up2date" will correctly handle "ES" or "WS" systems.
Regards,
Björn

Having problems connecting things to both usb ports at same time

I'm trying to connect both Serato Scratch and an audio interface into each of the usb ports on my powerbook, but i'm having problems. Serato will register when plugged into either of the usb ports, but as soon as i plug my audio interface into the other socket, Serato instantly loses the connection. As soon as unplug plug the interface, Serato instantly registers again.
Is this likely to be a mac problem? Should i be able to have both usb ports connected to and both things registering?
This is driving me crazy. Any help is greatly appreciated!

It's known that Powerbooks don't put out alot of electrical juice onto the USB ports. If both devices are relying on power from the USB ports, that may be the issue. If so, solution is to get a powered USB hub, or if the devices will support their own power supply, get one.

Unable to register service Error while deployment

Hi All,
I am getting the following error while deploying. I have attached the log details and the WSDL. Please suggest how to resolve this error.
2010-07-26T17:11:37.828+10:00] [soa_server1] [NOTIFICATION] [SOA-21046] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea] [arg: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: true] Calling coordinator to update composite. base composite: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea, new composite: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916, isForceDefault flag: true
[2010-07-26T17:11:38.254+10:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] Unable to register service.[[
oracle.webservices.provider.ProviderException: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:443)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:282)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:201)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:157)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:162)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.GeneratedMethodAccessor5638.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy262.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeRedeploy(StandaloneCompositeDeploymentCoordinatorImpl.java:62)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.overwriteExistingComposite(BaseDeployProcessor.java:375)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:222)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.getServiceName(ProviderConfigImpl.java:604)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:339)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:283)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:202)
... 43 more
[2010-07-26T17:11:38.265+10:00] [soa_server1] [NOTIFICATION] [SOA-21061] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: /deployed-composites] Removing label soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916 in namespace /deployed-composites of MDS storage
[2010-07-26T17:11:38.272+10:00] [soa_server1] [ERROR] [SOA-21037] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: Error during deployment: Update Failed: Unable to register service..] Sending back error message: Error during deployment: Update Failed: Unable to register service...
WSDL
<?xml version= '1.0' encoding= 'UTF-8' ?>
<wsdl:definitions
name="AVCadDataFeed"
targetNamespace="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:inp1="http://au/gov/vic/mas/ortd/Cadmsg"
xmlns:tns="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://au/gov/vic/mas/ortd/Cadmsg" schemaLocation="xsd/OdsCadMsg.xsd" />
</schema>
</wsdl:types>
<wsdl:message name="requestMessage">
<wsdl:part name="request" element="inp1:odsCadDataSet"/>
</wsdl:message>
<wsdl:portType name="livefeed_ptt">
<wsdl:operation name="livefeed">
<wsdl:input message="tns:requestMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:message name="headerMessage">
<wsdl:part name="header" element="inp1:customHeader"/>
</wsdl:message>
<wsdl:binding name="livefeed_pttSOAP11Binding" type="tns:livefeed_ptt">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="livefeed">
<soap:operation style="document"
soapAction="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed/livefeed"/>
<wsdl:input>
<soap:body use="literal" parts="request"/>
<soap:header use="literal" part="header"
message="tns:headerMessage"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="OrtdService">
<wsdl:port name="Ortd_Port" binding="tns:livefeed_pttSOAP11Binding">
<soap:address location="http://vdatdlsoa02.mas.vic.gov.au:8001/soa-infra/services/default/ProcessData/AVCadDataFeed"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks
Edited by: user5108636 on 26/07/2010 00:19

I is till throwing error after changing <wsdl:service name="AVCadDataFeed">Because still there are problems in WSDL. Error description gives the detail -
Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed and port livefeed_pt.
Make sure that port attribute has right value.
Also, what should be the value of the <soap:address location attribute in the service elementFrom Web Services Description Language (WSDL) 1.1 specification (http://www.w3.org/TR/wsdl#_soap:address) -
The SOAP address binding is used to give a port an address (a URI). A port using the SOAP binding MUST specify exactly one address. The URI scheme specified for the address must correspond to the transport specified by the soap:binding.
<definitions .... >
<port .... >
<binding .... >
<soap:address location="uri"/>
</binding>
</port>
</definitions>
Regards,
Anuj

Number of irf (integer register file) reading ports, 3 or 4??

All T1 documents indicate that irf (integer register file) has 3 reading ports. But when reading through its rtl model bw_r_irf.v, I have to raise the doubt that it actually has 4 reading ports physically, which are r1, r2, r3 and r3h. Even though the addresses of r3 and r3h are very close, they are different by the lowest bit in the rtl. In physical implementation, you have to use a different ports for different addresses. So my question is:
1. Is T1 irf implemented with 4 ports physically or I miss-understand the problem?
2. What's the use for that extra port 3h?

Hi,
The register file is implemented such that, when doing a read, only 4 high bits of the address got decoded, so content of two neighboring register got read out. For port 1 and 2, the lowerst bit of the address is used to select which one goes to the output.
RTL for port rs1, rs2 and rs3 are identical but implementation could be how you describe above. ie. using lowest bit of address to mux select which output goes out.
However for port3, the lowerst bit of the address is not used(even thouth it exists in RTL), so the content of both registers goes to the output, the data from the even register goes to port 3 while the data from the odd register goes to port 3h
All five bits of address are used for port3 in RTL, lowest bit is hardcoded to 1 for the port 3h. For double-store the lowest bit has to be zero (double word/even register alignment). For single word store, port3 can access either odd or even address (same mechanism as port1 and port2) and lower 32bits of port3 will be the same as port3h.
Thanks.

Unable to register UWL

Hello
We are unable to register the UWL.
Following is the status of current configurations:
1. SSO works fine.
2. JCO to all systems are fine.
3. Unable to register the WebFlowConnector and AlterConnector
The WebFlowConnector has following settings:
System Alias: ECCCLNT500
Connector Type: WebFlowConnector
The error while registering WebFlowConnector is:
System ECCCLNT500: Tue Feb 16 20:14:03 EET 2010
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Tue Feb 16 20:14:03 EET 2010
: No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :ECCCLNT500
Is there any specific area to verify?
Another area, which I think is related, Connection Test for Connectors is also failing and gives SSO error. While SSO for users is activated and in working condition. The exact error while testing Connection Test for Connectors is:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards
Yash

Finally, we got it through.
We were doing two major mistakes, and until I myself looked into we were not able to identify the root cause of problem.
The two mistakes we were doing:
1. We had a user communication uwl_service in R/3 but it was missing in portal. Even after we created it, our administrator was logged in as Admin instead of uwl_service.
2. We goofed up the Connector settings:
System Administration -> System Landscape -> Browse to your System (double click on it) -> Select Connector from the Property Catalog
0. Use appropriate group in group. Check with BASIS consultant to know correct Group.
1. In the Logical System Name type the correct Logical System Name. Check with BASIS consultant to know correct Logical System Name.
2. In the message server, instead of Hostname type the IP address of your message server. Check with BASIS consultant to know correct IP Address.
3. Remote Host Type should be set to 3 if the message server is R/3.
4. SAP Client should be client to which you want to connect in Message Server.
5. SID should be the SID of Message Server.
6. Server Port should be the correct port for Message Server. Check with BASIS consultant to know correct Port Number.
7. Rest all settings should be left to defult.
8. To know if these settings are correct, along with BASIS guy perform the following: Logon to portal with an administrator user in EP whos communication user also exist in R/3. Go to System Administration -> Support -> SAP Application -> SAP Transaction -> Select any system, type any R/3 tcode and select SAP GUI for Windows. Click Go!! You should see the TCODE Output on Screen. If yes, you configurations are correct.
It worked for us, hope it works in future for someone else too.
Would like to thank Sandeep for excellent post: /message/6787312#6787312 [original link is broken] , which helped us troubleshoot to great extent.
Thanks
Yash

JDeveloper was unable to determine the HTTP port number

Hi,
I am trying to deploy my application from Jdeveloper(9.03) to Oracle Application server(9i). Both the servers are running on the same machine.[oc4j is running]
When I deploy my applicaion (web war), I am getting the following error:
"http://Anil:????/ManApp
Note: JDeveloper was unable to determine the HTTP port number of the remote server for the above URL(s)."
I have specified 8888 port in the connection dialog and it is successfully connecting to the Oracle AS.
Please help me sort this out.
Regards
~anil.

JDEV Version: 10.1.2.17.84
ORACLE AS - 10.1.2.0.0

MSDTC connection manager is unable to register with RPC

HI
I am using the Windowserver 2012. We mount a WCF application , the server is working fine.. sundenly this error occurred in production environment. what might be the reason. What should i check in my server? how to fix this ? I navigate to components
and click distributed coordianator nothing comes in the list like LOCAL DTC. I am very confused. it is not happening in any other sites. This server is database server for my application
Thank you.
Log Name:      Application
Source:        Microsoft-Windows-MSDTC
Date:          9/20/2014 9:00:41 AM
Event ID:      4358
Task Category: MSDTC Proxy
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IO-DB1
Description:
The MS DTC Connection Manager is unable to register with RPC to use one of LRPC, TCP/IP, or UDP/IP.
Please ensure that RPC is configured properly. If "ServerTcpPort"
registry key is configured(DWORD value under the HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC for local DTC instance or under cluster
hive for clustered DTC instance), please verify if the configured port is valid and the port is not already in use by a different component.
Error Specifics:hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe"
"C:\Windows\system32\comexp.msc" , Pid: 956
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MSDTC" Guid="{719BE4ED-E9BC-4DD8-A7CF-C85CE8E4975D}" EventSourceName="MSDTC" />
    <EventID Qualifiers="49152">4358</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-20T02:00:41.000000000Z" />
    <EventRecordID>19391</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>IO-DB1</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe" "C:\Windows\system32\comexp.msc" , Pid: 956</Data>
    <Binary>4D005300440054004300</Binary>
</EventData>
</Event>
Thanks & Regards Manoj

Hi Partner,
Thank you for your post.
From your description, I see that the current issue is you notice Event ID 4358 error (source: Microsoft-Windows-MSDTC) logged in Application log.
Please let me know if I misunderstand anything or you have any additional information.
Firstly, could you help clarify that what operation you are performing while the issue occur? It would be nice if you can provide a GUI error message if any.
Currently, based on the error message and my research, some incorrect register key about RPC dynamic port resulting in MSDTC behaves unexpectedly might cause such symptom.
If that is the case, let's take the following steps to check our issue.
[Note: As the operation is related to the registry key components, I suggest we backup the entries firstly before performing the steps]
1. Delete all the register keys about RPC dynamic port you inserted manually.
2. Configure the ports via UI.
3. Reboot the server.
Please let me know if there is any update. Thank you for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am unable to register in imessage and facetime using my ipad 3

I am unable to register in imessage and facetime using my ipad 3 and iphone 4s. The message pops up as user name or password is not correct, whereas i am **** sure that both are correct. I am located in uae.

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Unable to register the SAP JAVA CONNECTOR sapjco3.dll file

HI
I'm trying to intergrate BO and BW using SAP BO Integration kit, and following the manual at http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f&overridelayout=true
But first i must install the SAP Java Connector, I have downloaded them from https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000719346&.
My server is a WMvare win 2008.service pack 2.
My problem is that i'm unable to register the sapjco3.dll file.
I'm runnning the comand regsvr32 "C:windowssyswow64sapjco3.dll
but I only get the error message "The module "sapjco3.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "sapjco3.dll" is a valid DLL or OCX file ant try again"
I hav tried both the 64 bit and the 32 bit version of the dll. same error.
the dll version is 7110.34.16.7531
Any ideas
Thanks
På

Hi Pal,
you need to use the Java Connector v 2.1.8 and there is no need to register the DLL.
ingo

Error deploy SOA application "Deployment Failed: Unable to register service

Hi All
I have build a SOA application and tried to build and deploy to my SOA server but stuck with below error msg.
Step-1: Created the application, with BPEL components etc.
Step-2: Right click on the application, then Deploy -> To -> My Server..
Step-3: SOA build msg
Buildfile: F:\PF\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml
BUILD SUCCESSFUL
Total time: 5 seconds
Step-4: Deployment msg
+[03:09:24 PM] ---- Deployment started. ----+
+[03:09:24 PM] Target platform is (Weblogic 10.3).+
+[03:09:24 PM] Running dependency analysis...+
+[03:09:24 PM] Building...+
+[03:09:32 PM] Deploying profile...+
+[03:09:32 PM] Wrote SAR file to F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Deploying sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
+[03:09:32 PM] Processing sar=/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Adding sar file - F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Preparing to send HTTP request for deployment+
+[03:09:33 PM] Creating HTTP connection to host:9.184.173.34, port:8001+
+[03:09:33 PM] Sending internal deployment descriptor+
+[03:09:33 PM] Sending archive - sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:53 PM] Received HTTP response from the server, response code=500+
+[03:09:53 PM] Error deploying archive sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
+[03:09:53 PM] HTTP error code returned [500]+
+[03:09:53 PM] Error message from server:+
Error during composite deployment: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: Deployment Failed: Unable to register service.: Deployment Failed: Unable to register service..
+[03:09:53 PM] Check server log for more details.+
+[03:09:53 PM] #### Deployment incomplete. ####+
+[03:09:53 PM] Error deploying archive file:/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)+
Also I have check the http://localhost:8001/soa-infra/ and it says*
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.0.0 - 11.1.1.1.0_090609.1407.5182 built on Tue Jun 09 15:06:41 PDT 2009
WebLogic Server 10.3.1.0 Wed Jun 10 22:24:41 MDT 2009 1227385 (10.3.1.0)
There are no composites deployed to the platform
Edited by: user11263460 on Dec 13, 2009 2:39 AM

If this still needed. Take a look in Your WSDL file - any references to schemas etc. Are they accessible on server? For example - XSD file have absolute file system link - change it to project level import (copy xsd file to project) or publish to MDS.

Getting : Unable to register APS in boe_cmsd*.log

Hello all,
I am getting the following errors when trying to start my CMS server.
Facts:
Environment: Linux cat ccm_20100105_1262708802412.log
Tue Jan 05 2010 16:26:42 GMT0000 (GMT) /opt/BO_Ent_3.2/bobje/setup/jscripts//ccmunix.js started at Tue Jan 05 2010 16:26:42 GMT0000 (GMT)
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) About to process commandline parameters...
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Finished processing commandline parameters.
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Warning: No CMS name supplied, setting CMS name to machine name.
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Creating session manager...
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) Logging onto CMS...
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) err: ERROR Couldn't logon to CMS (STU00152)
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) err: Error description: The system jldbo1 can be contacted, but there is no Central Management Server running at port 6400.
(BOSERVER)/opt/BO_Ent_3.2/bobje/logging> cat boe_cmsd_10228_2010_01_05_16_20_23_484_trace.log
apsserver.cpp:1390: TraceLog message 1
2010/01/05 16:20:23.484|>>|A| |10228|1455542784| |||||||||||||||assert failure: (apsserver.cpp:1390). (0 : Unable to register APS with local nameserver).
Attempt to fix:
I shutdown BO servers and tomcat by running following:
/opt/BO_Ent_3.2/bobje/stopservers
/opt/BO_Ent_3.2/bobje/tomcatshutdown.sh
I then restarted BO servers and tomcat by running following:
/opt/BO_Ent_3.2/bobje/startservers
/opt/BO_Ent_3.2/bobje/tomcatstartup.sh
Connected to BO repositrory by running the following:
(BOSERVER)/opt/BO_Ent_3.2/bobje> sqlplus system/****@bocms
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jan 5 18:40:30 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Still getting same errors:
Thanks.

the port is not used:
(BOSERVER)/opt/BO_Ent_3.2/bobje> netstat -an | grep 6400
(BOSERVER)/opt/BO_Ent_3.2/bobje>
I agree the CMC server is not starting, is is related to this log:
(BOSERVER)/opt/BO_Ent_3.2/bobje/logging> cat boe_cmsd_3703_2010_01_05_16_02_18_556_trace.log
apsserver.cpp:1390: TraceLog message 1
2010/01/05 16:02:18.556|>>|A| | 3703|1455542784| |||||||||||||||assert failure: (apsserver.cpp:1390). (0 : Unable to register APS with local nameserver).
Wait ... it looks like the CMC server is now running. I see someone modified the /etc/host file. They commented out the following line :
#127.0.0.1 localhost junk1 junk1.much.com
Not sure how this would help the CMC start except now when accessing the host server junk1 the IP would change from 127.0.0.1 to the public IP. Perhaps the CMC server wanted to access the public IP and not the loopback. If that is the case perhaps this error would occur if the host file was modified anytime the CMC server was up and running, then when it bounced, it would have looked up the wrong IP since the host file was changed.
Thanks.

Akamai NetSession Interface failes to install client: Unable to register Control Panel. Aborting installation.

I am trying to eval SQL Server 2014 for use on a new BI project that we starting. However, the first step, downloading and installing the Akamai NetSession Interface (download mgr. ) is failing to install on my laptop due, as it raises the following error
message: " Failed to install client: Unable to register Control Panel. Aborting installation." I have tried running it as Administrator, and granting my ID security to run it. Both tasks failed to get it to install.
Can you please help me get beyond this roadblock?
kwh

Hello,
Please login as an administrator and follow troubleshooting instructions provided on the following article:
http://www.akamai.com/html/solutions/downloadmanager_faq.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to register both BRI ports of C887VA-V using MGCP (Bug : CSCuj54849)

Similar Messages

Maybe you are looking for