Unable to Register on Ovi-using X-6 16 gb

I just bought my phone X-6 16gb yesterday and when I switched it on, i received a PIN and a msg that told me to register for a free unlimited music subscription on OVI
but when I tried to register myself from my computer after filling the details it said Something's Wrong Looks like there’s been a problem, so you’re seeing this message instead of the what you were expecting.
Try Again
I'm reloading the page again and again but no use
and when I tried to register myself using my phone it said
Your mobile isn't supported by Ovi Music,but you can still discover and download new music by visiting music.ovi.com on your PC
and when I downloaded & installed Nokia OVI music player and tried to register myself from there, i was still unable to register
So please someone tell me what to do because I'm so much confused and whatever I do is not helping ...need help urgently

Try regristering in the OVI store app.

Similar Messages

I am unable to register in imessage and facetime using my ipad 3

I am unable to register in imessage and facetime using my ipad 3 and iphone 4s. The message pops up as user name or password is not correct, whereas i am **** sure that both are correct. I am located in uae.

Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have brought ipad 2 from USA to INDIA(32 GB WIFI). I am unable to register with app store using my credit card using india details. Pls help.

I have brought ipad 2 from USA to INDIA(32 GB WIFI). I am unable to register with app store using my credit card using india details. Pls help.

You cannot. To open an account on a different iTunes country you must have a valid credit card issued from a bank in that country. You must have a billing address in that country, as well.
There are reasons why some apps are not available in all iTunes stores.

HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

Unable to register service Error while deployment

Hi All,
I am getting the following error while deploying. I have attached the log details and the WSDL. Please suggest how to resolve this error.
2010-07-26T17:11:37.828+10:00] [soa_server1] [NOTIFICATION] [SOA-21046] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea] [arg: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: true] Calling coordinator to update composite. base composite: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea, new composite: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916, isForceDefault flag: true
[2010-07-26T17:11:38.254+10:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] Unable to register service.[[
oracle.webservices.provider.ProviderException: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:443)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:282)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:201)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:157)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:162)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.GeneratedMethodAccessor5638.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy262.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeRedeploy(StandaloneCompositeDeploymentCoordinatorImpl.java:62)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.overwriteExistingComposite(BaseDeployProcessor.java:375)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:222)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.getServiceName(ProviderConfigImpl.java:604)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:339)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:283)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:202)
... 43 more
[2010-07-26T17:11:38.265+10:00] [soa_server1] [NOTIFICATION] [SOA-21061] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: /deployed-composites] Removing label soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916 in namespace /deployed-composites of MDS storage
[2010-07-26T17:11:38.272+10:00] [soa_server1] [ERROR] [SOA-21037] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: Error during deployment: Update Failed: Unable to register service..] Sending back error message: Error during deployment: Update Failed: Unable to register service...
WSDL
<?xml version= '1.0' encoding= 'UTF-8' ?>
<wsdl:definitions
name="AVCadDataFeed"
targetNamespace="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:inp1="http://au/gov/vic/mas/ortd/Cadmsg"
xmlns:tns="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://au/gov/vic/mas/ortd/Cadmsg" schemaLocation="xsd/OdsCadMsg.xsd" />
</schema>
</wsdl:types>
<wsdl:message name="requestMessage">
<wsdl:part name="request" element="inp1:odsCadDataSet"/>
</wsdl:message>
<wsdl:portType name="livefeed_ptt">
<wsdl:operation name="livefeed">
<wsdl:input message="tns:requestMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:message name="headerMessage">
<wsdl:part name="header" element="inp1:customHeader"/>
</wsdl:message>
<wsdl:binding name="livefeed_pttSOAP11Binding" type="tns:livefeed_ptt">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="livefeed">
<soap:operation style="document"
soapAction="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed/livefeed"/>
<wsdl:input>
<soap:body use="literal" parts="request"/>
<soap:header use="literal" part="header"
message="tns:headerMessage"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="OrtdService">
<wsdl:port name="Ortd_Port" binding="tns:livefeed_pttSOAP11Binding">
<soap:address location="http://vdatdlsoa02.mas.vic.gov.au:8001/soa-infra/services/default/ProcessData/AVCadDataFeed"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks
Edited by: user5108636 on 26/07/2010 00:19

I is till throwing error after changing <wsdl:service name="AVCadDataFeed">Because still there are problems in WSDL. Error description gives the detail -
Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed and port livefeed_pt.
Make sure that port attribute has right value.
Also, what should be the value of the <soap:address location attribute in the service elementFrom Web Services Description Language (WSDL) 1.1 specification (http://www.w3.org/TR/wsdl#_soap:address) -
The SOAP address binding is used to give a port an address (a URI). A port using the SOAP binding MUST specify exactly one address. The URI scheme specified for the address must correspond to the transport specified by the soap:binding.
<definitions .... >
<port .... >
<binding .... >
<soap:address location="uri"/>
</binding>
</port>
</definitions>
Regards,
Anuj

Unable to register ORACLE_HOME into global orainventory

Hi,
I am unable to register my rdbms_oracle_home in global orainventory.
I am getting the velow error.
ERROR: Error in fixing ORACLE_HOME index
java.io.FileNotFoundException: /u04/Rel11i/devdb/9.2.0/inventory/ContentsXML/comps.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:91)
at java.io.FileInputStream.<init>(FileInputStream.java:54)
at oracle.apps.ad.util.OUISetup.fixHomeIdx(OUISetup.java:293)
at oracle.apps.ad.util.OUISetup.main(OUISetup.java:1347)
Removing OUI entries from the global inventory: /etc/oraInventory/ContentsXML/comps.xml
Registering the OUI component with local inventory...
ERROR: Exception while registering OUI 2.2 Component in the inventory.
java.io.FileNotFoundException: /u04/Rel11i/devdb/9.2.0/inventory/ContentsXML/comps.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:91)
at oracle.apps.ad.util.OUISetup.registerOuiComp(OUISetup.java:913)
at oracle.apps.ad.util.OUISetup.main(OUISetup.java:1349)
The error is due to missing "inventory" directory in RDBMS $ORACLE_HOME.
But the IAS$ORACLE_HOME is fine.
Is there any way to create this directory or we need to reinstall Oracle_home. if yes then how do we do that. Currently we are on 9.2.0.6. Do I need to reinstall it ?
Regards,
Farhat

So, what is the difference between this and using 'rapidwiz -techstack'? We never discussed this option in this thread ? Moreover what's the point in installing and redoing the work just for Inventory? Can you explain, if I can do the task in 5 min, why should I spend 50 min on it. Anyways that's my opinion.
Thanks

LIBTUX_CAT:582: ERROR: Unable to register, registry table full

When we tried to call one of our service 100 times parallely we got an error as :-
181936.547.MLXWTAIXDEV!GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: Unable to register, registry table full
182718.591.MLXWTAIXDEV!GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: Invalid registry table slot index passed, unable to unregister
Can somebody help us out why this error is coming.
The UBB configuration for same is as:-
MAXACCESSERS 350
MAXSERVERS 430
MAXSERVICES 1200
MAXGROUPS 100
MAXNETGROUPS 20
MAXMACHINES 256
MAXWSCLIENTS = 100
MAXACLCACHE = 10
MAXPENDINGBYTES = 100000
"TMMETADATA"
SRVGRP = "M_JOLT_GRP"
CLOPT = "-A -- -f /dev_app/dtux5/bin/reposfile"
RESTART= Y
SRVID = 1
GRACE = 3600
MAXGEN = 5
"GWWS"
SRVGRP = "M_JOLT_GRP"
CLOPT = "-A -- -iGWWS1"
RESTART= Y
SRVID = 2
The wsdf file is as
<Definition
xmlns="http://www.bea.com/Tuxedo/WSDF/2007"
name="EBATEST" wsdlNamespace="urn:salt.EBATEST.wsdl">
<WSBinding id="CURTEST_Binding">
<SOAP>
<AccessingPoints>
<Endpoint
address="http://10.16.114.145:7001/ebaapp" id="eba_HTTP_IN">
</Endpoint>
</AccessingPoints>
</SOAP>
<Servicegroup id="ebatestGrp">
<Service name="SCD_GET_TRD_UND"></Service>
</Servicegroup>
</WSBinding>
</Definition>
And salt file used for making saltconfig is as
<Deployment xmlns="http://www.bea.com/Tuxedo/SALTDEPLOY/2007">
<WSDF>
<Import location="/dev_app/dtux5/bin/example.wsdf"></Import>
</WSDF>
<WSGateway>
<GWInstance id="GWWS1">
<Inbound>
<Binding ref="EBATEST:CURTEST_Binding">
<Endpoint use="eba_HTTP_IN"></Endpoint>
</Binding>
</Inbound>
<Properties>
<Property name="enableSOAPValidation" value="true"/>
</Properties>
</GWInstance>
</WSGateway>
<System></System>
</Deployment>
The trace file as generated is as :-
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184541.717.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184541.718.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184541.722.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281396]
184541.723.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x1: SESSION: TIMEOUT VALUE IS [9999]:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: User id :mamu2:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Sssn id :281396:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Business id :B21001:
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Business msg :Invalid User:The Login Id entered is not valid
184541.727.MLXWTAIXDEV!svr_errlog.11956518.1.0: Service Name :SVC_SESSION
184541.727.MLXWTAIXDEV!svr_session.11043070.1.0: No Data in Session table for :mamu2:, :281396:
184541.728.MLXWTAIXDEV!GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
184541.729.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184700.521.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184700.522.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184700.522.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184700.523.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x2: SESSION: TIMEOUT VALUE IS [9999]:
184700.524.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x2: SESSION: SESSION [281397] IS VALID:
184700.538.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184700.538.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.691.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.692.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.693.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x3: SESSION: TIMEOUT VALUE IS [9999]:
184707.694.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x3: SESSION: SESSION [281397] IS VALID:
184707.710.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.711.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.718.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.718.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.719.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x4: SESSION: TIMEOUT VALUE IS [9999]:
184707.719.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x4: SESSION: SESSION [281397] IS VALID:
184707.732.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.732.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.738.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.738.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.739.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.739.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.739.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.739.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x5: SESSION: TIMEOUT VALUE IS [9999]:
184707.740.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x5: SESSION: SESSION [281397] IS VALID:
184707.756.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.756.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.769.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.770.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.770.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x6: SESSION: TIMEOUT VALUE IS [9999]:
184707.771.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x6: SESSION: SESSION [281397] IS VALID:
184707.798.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.799.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.807.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.807.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.808.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x7: SESSION: TIMEOUT VALUE IS [9999]:
184707.808.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x7: SESSION: SESSION [281397] IS VALID:
184707.821.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.821.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.831.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.831.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.832.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x8: SESSION: TIMEOUT VALUE IS [9999]:
184707.832.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x8: SESSION: SESSION [281397] IS VALID:
184707.843.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.843.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.855.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.856.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.856.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x9: SESSION: TIMEOUT VALUE IS [9999]:
184707.857.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af x9: SESSION: SESSION [281397] IS VALID:
184707.869.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.869.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.876.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.876.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.877.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
184707.877.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
184707.899.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.899.MLXWTAIXDEV!GWWS.2277636.1291.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.906.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.907.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.907.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.907.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
184707.908.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
184707.918.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.919.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.932.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.932.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.933.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
184707.933.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
184707.945.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.945.MLXWTAIXDEV!GWWS.2277636.1034.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.957.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.957.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
184707.958.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
184707.958.MLXWTAIXDEV!svr_session.11043070.1.0: gtrid x0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
184707.973.MLXWTAIXDEV!GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: Invalid registry table slot index passed, unable to unregister
184707.973.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Got a message from Tuxedo, SCO index=4095
184707.973.MLXWTAIXDEV!GWWS.2277636.1548.0: TRACE:ms:Send a http message to net, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A HTTP message is received, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:A SOAP message is received, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.777.0: TRACE:ms:Begin data transformation of request message, buffer type = FML32, SCO index=4095
184707.980.MLXWTAIXDEV!GWWS.2277636.1.0: TRACE:ms:Delivering a message to Tuxedo, service name =SCD_GET_TRD_UND, SCO index=4095
184707.980.MLXWTAIXDEV!svr_session.11043070.1.0: SESS: INPUT IS [mamu2] : [281397]
Regards,
Anurag

Hi,
From the Tuxedo documentation, LIBTUX_CAT:582 is described as follows along with a recommended action.
>
582
ERROR: Unable to register, registry table full
Description
The BEA TUXEDO system was attempting to find a registry table slot for a process, but the registry table was full.
Action
Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, then reboot the application and try again.
>
So try increassing MAXACCESSERS and see if your problem goes away.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Unable to register my data warehouse in Service Manager

I have been trying to register my data warehouse but keep getting the same error message each time - "Invalid URI: the hostname could
not be parsed." I know the issue is on the ServiceManager database side of things, but there is not a lot of information related to this error message and the info I do find is unrelated to ServiceManager. I have gone as far as building a
brand new data warehouse server and reinstalling all of the data warehouse databases from scratch. It doesn't matter if I tried to register with the original data warehouse environment or the new environment, I get the same error message. I also
received a powershell command from Microsoft Support to help clean up any residual entries in the ServiceManager database that might be left over. At this point I'm at a loss on how to proceed. Anyone ever run into this issue?
Here's the event log message:
Unable to register Service Manager installation with Data Warehouse installation.
Data Warehouse Server: DW_SCSM
Service Manager Management Server: FlowSMRC
Exception: Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSServiceException: Invalid URI: The hostname could not be parsed.
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.executeHelper(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.Invoke(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.DWRegistration.Registration.DWRegistrationHelper.AcceptChanges(WizardMode wizardMode)
Also, I tried registering the data warehouse using powershell Add-SCDWMgmtGroup and get an error saying that Cannot associate Service Manager installation on scsm_server with Service Manager Data Warehouse installation on dw_server.

Just got additional information about this error. If you run the following query in SQL pointing to the ServiceManager database you should see the name of the Management Server. The query is:
select * from MT_Microsoft$SystemCenter$ResourceAccessLayer$SdkResourceStore
There is a column named Server_<some GUID> that should contain the Management Sever NetBIOS name. If it has some other name, run an update query to ensure the column has the NetBIOS name of the Management Server. Restart the SCSM Console
and retry the Database Registration again and it should succeed.
Microsoft has said that this is normally caused by either moving the database or database server to another server and the value is never updated.
Try registering the DW Server again and see if you have better luck.

Unable to register UWL

Hello
We are unable to register the UWL.
Following is the status of current configurations:
1. SSO works fine.
2. JCO to all systems are fine.
3. Unable to register the WebFlowConnector and AlterConnector
The WebFlowConnector has following settings:
System Alias: ECCCLNT500
Connector Type: WebFlowConnector
The error while registering WebFlowConnector is:
System ECCCLNT500: Tue Feb 16 20:14:03 EET 2010
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Tue Feb 16 20:14:03 EET 2010
: No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :ECCCLNT500
Is there any specific area to verify?
Another area, which I think is related, Connection Test for Connectors is also failing and gives SSO error. While SSO for users is activated and in working condition. The exact error while testing Connection Test for Connectors is:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards
Yash

Finally, we got it through.
We were doing two major mistakes, and until I myself looked into we were not able to identify the root cause of problem.
The two mistakes we were doing:
1. We had a user communication uwl_service in R/3 but it was missing in portal. Even after we created it, our administrator was logged in as Admin instead of uwl_service.
2. We goofed up the Connector settings:
System Administration -> System Landscape -> Browse to your System (double click on it) -> Select Connector from the Property Catalog
0. Use appropriate group in group. Check with BASIS consultant to know correct Group.
1. In the Logical System Name type the correct Logical System Name. Check with BASIS consultant to know correct Logical System Name.
2. In the message server, instead of Hostname type the IP address of your message server. Check with BASIS consultant to know correct IP Address.
3. Remote Host Type should be set to 3 if the message server is R/3.
4. SAP Client should be client to which you want to connect in Message Server.
5. SID should be the SID of Message Server.
6. Server Port should be the correct port for Message Server. Check with BASIS consultant to know correct Port Number.
7. Rest all settings should be left to defult.
8. To know if these settings are correct, along with BASIS guy perform the following: Logon to portal with an administrator user in EP whos communication user also exist in R/3. Go to System Administration -> Support -> SAP Application -> SAP Transaction -> Select any system, type any R/3 tcode and select SAP GUI for Windows. Click Go!! You should see the TCODE Output on Screen. If yes, you configurations are correct.
It worked for us, hope it works in future for someone else too.
Would like to thank Sandeep for excellent post: /message/6787312#6787312 [original link is broken] , which helped us troubleshoot to great extent.
Thanks
Yash

Unable to register web service in CF 7

I am unable to register a web service on admin without providing a username/password. the ws works well enough on other systems without even providing the username/password.
Any replies will be appreciated. thanks!

Wow, that's interesting (that you can invoke the web service without a username/password in CFML, but can't register it in the Admin).
Still, I want to understand what makes you want to do that (register it in the admin). You say, "I have a pool of web services to manage so I assume admin to be the best place to maintain them seeing on a broader perspective." I'm not sure what you mean by that.
Besides a little more explanation, I'd still ask: if you can't get around this (not saying that it should fail, but just if it can't be resolved), do you at least agree that you don't NEED to define the web services this way to use them. In fact, the opposite is true: if you invoke them in CFML (whether with createobject/cfobject/cfinvoke) that will populate this Admin page for each web service that's invoked, so you could "get around" the problem and have all your web services listed this way, for whatever value that offers.
But yes, it seems it should work the way you want to. I'm not denying that.
Just trying to help.
/charlie

I am unable to register my debit card after creating my apple ID. Whenever i click enter after filling all the debit card details, it shows that, "your payement method has been declined". Please help me people, why is it so.?

I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!

The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store.

MSDTC connection manager is unable to register with RPC

HI
I am using the Windowserver 2012. We mount a WCF application , the server is working fine.. sundenly this error occurred in production environment. what might be the reason. What should i check in my server? how to fix this ? I navigate to components
and click distributed coordianator nothing comes in the list like LOCAL DTC. I am very confused. it is not happening in any other sites. This server is database server for my application
Thank you.
Log Name:      Application
Source:        Microsoft-Windows-MSDTC
Date:          9/20/2014 9:00:41 AM
Event ID:      4358
Task Category: MSDTC Proxy
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IO-DB1
Description:
The MS DTC Connection Manager is unable to register with RPC to use one of LRPC, TCP/IP, or UDP/IP.
Please ensure that RPC is configured properly. If "ServerTcpPort"
registry key is configured(DWORD value under the HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC for local DTC instance or under cluster
hive for clustered DTC instance), please verify if the configured port is valid and the port is not already in use by a different component.
Error Specifics:hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe"
"C:\Windows\system32\comexp.msc" , Pid: 956
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MSDTC" Guid="{719BE4ED-E9BC-4DD8-A7CF-C85CE8E4975D}" EventSourceName="MSDTC" />
    <EventID Qualifiers="49152">4358</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-20T02:00:41.000000000Z" />
    <EventRecordID>19391</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>IO-DB1</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe" "C:\Windows\system32\comexp.msc" , Pid: 956</Data>
    <Binary>4D005300440054004300</Binary>
</EventData>
</Event>
Thanks & Regards Manoj

Hi Partner,
Thank you for your post.
From your description, I see that the current issue is you notice Event ID 4358 error (source: Microsoft-Windows-MSDTC) logged in Application log.
Please let me know if I misunderstand anything or you have any additional information.
Firstly, could you help clarify that what operation you are performing while the issue occur? It would be nice if you can provide a GUI error message if any.
Currently, based on the error message and my research, some incorrect register key about RPC dynamic port resulting in MSDTC behaves unexpectedly might cause such symptom.
If that is the case, let's take the following steps to check our issue.
[Note: As the operation is related to the registry key components, I suggest we backup the entries firstly before performing the steps]
1. Delete all the register keys about RPC dynamic port you inserted manually.
2. Configure the ports via UI.
3. Reboot the server.
Please let me know if there is any update. Thank you for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

You are unable to register what ? If you are in China then you can only use the China iTunes store (you have to be in a country to use its store), if you want to contact China iTunes Support then you can do so via this page : http://www.apple.com/cn/support/itunes/contact/

Flash Player Auto Upgrade ver 14, Won't Install: Error- Unable to Register

The Flash Player Upgrade attempted to install but stopped and gave me an error: Unable to Register. I have been all through the forums and I believe I have tried everything suggested. These have been my attemptsOS - Windows XP Pro, latest updates loaded.
1- I read a suggestion to attempt a "clean install" . I watched the YOUTUBE video that was on the page and followed it exactly. Attempted to re-install ver 14, and recieved the same error. this is the link to the page I followed: Can not install Adobe Flash Player. Error messages are "Failed to - Microsoft Community
2- I also downloaded the SubInACL file and the reset_fp10.zip file, followed the instructions and ran the file. Attempted to re-install ver 14 and got the same error, unable/failed to register.
3- I have attempted this numerous ways, rebooting the computer in between each change, re-booting after I did all, and nothing seems to work.
4- Downloaded Mozilla Firefox at someones suggestion, attempted to download and install, still the same error.
5- When I open AOL, it attempts to install Flash Runtime and the same thing happens. Error, Failed to Register.
6- Purchased a Registry Editor/Cleaner. Ran this cleaner and it did speed up my computer. Did clean uninstall of Flash Player making sure no files were on my computer. Same error.
7- Finally, contacted Adobe by phone. The tell me they can help and try to fix the problem, but it will cost me $39.95 per instance. And, I didn't get any warm feeling that there was a gaurantee that they could fix it. In fact, i could hardly understand the indian speaking tech support.
8- I also was told that after 1pm EDT, the new Adobe help page would be up and there would be a fix on it. Now, 3:20 EDT, and the page is still not up.
Anyone have any suggestions to fix this. I want to avoud the "F" word ,,, Format and re-install from scratch just to get this fixed.

I'm using WinXP (Home Edition) with Service Pack 3, and IE ver 8. When I tried the auto upgrade to Ver 14, I got the same results as you -- "failed to register". What tickes me off the most is that the auto upgrade deleted the previous version of FlashPlayer that worked fine. Now I get no flash content using IE8,
Like you, I tried to install a previous version of FlashPlayer and got the idotic response "you need to install the latest version, Ver 14" which caused all the problems.
Maybe the brainworks at Adobe can develop a fix soon.
If not, I will never install another Adobe product on my newer Win8 computer.

Unable to register the SAP JAVA CONNECTOR sapjco3.dll file

HI
I'm trying to intergrate BO and BW using SAP BO Integration kit, and following the manual at http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f&overridelayout=true
But first i must install the SAP Java Connector, I have downloaded them from https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000719346&.
My server is a WMvare win 2008.service pack 2.
My problem is that i'm unable to register the sapjco3.dll file.
I'm runnning the comand regsvr32 "C:windowssyswow64sapjco3.dll
but I only get the error message "The module "sapjco3.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "sapjco3.dll" is a valid DLL or OCX file ant try again"
I hav tried both the 64 bit and the 32 bit version of the dll. same error.
the dll version is 7110.34.16.7531
Any ideas
Thanks
På

Hi Pal,
you need to use the Java Connector v 2.1.8 and there is no need to register the DLL.
ingo

Unable to Register on Ovi-using X-6 16 gb

Similar Messages

Maybe you are looking for