Unable to register unless running linux

Hi,
I just tried to register, and the question needed to register makes you have to run linux.
This is not very friendly.
I ran the command under cygwin, and the answer didn't work. I can't run linux at work.
Please make the registration question open to those who want to register, but don't have the expertise to decide a dense piece of scripting.

jasonwryan wrote:blocked for life?
Yes, even better!
@Ngoonie, you're right. You shall pass!
And futhermore, if my three strikes and you're out approach is adopted, I propose to add degrading messages in between attempts.
I imagine the average registration attempt to go something like this:
Question: What is the output of blah, blah, blah?
Prospective registrant: uname wut? WTF
Answer:
Prospective registrant: Damn, I accidentally hit the enter button.
Message: Strike one, dumb ass!
Question:What is...
Registrant: I hope I don't have to use that terminal thingy. I never did figure out what that was for. Oh well, I guess I'll try it because I really want to be an Archer! I love the simplicity. Arch is for me! OK, lets see,
#What is the output of ....?
#bash: What: command not found
Answer:bash: What: command not found
Message: Strike two. Wrong again dumb ass!
Answer:
Registrant: Dammit!, I hit the f*&^%$g enter button again!
Massage: Strike three. You're outta here. You are hereby banned for life! Go. Leave. Don't let the door hit ya where the good Lord split ya. Good luck to you and may God have mercy on your soul.
Registrant then gets redirected to the Ubuntu homepage
edit: This thread is then redirected to TGN
Last edited by stlarch (2011-10-07 13:34:23)

Similar Messages

Getting : Unable to register APS in boe_cmsd*.log

Hello all,
I am getting the following errors when trying to start my CMS server.
Facts:
Environment: Linux cat ccm_20100105_1262708802412.log
Tue Jan 05 2010 16:26:42 GMT0000 (GMT) /opt/BO_Ent_3.2/bobje/setup/jscripts//ccmunix.js started at Tue Jan 05 2010 16:26:42 GMT0000 (GMT)
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) About to process commandline parameters...
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Finished processing commandline parameters.
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Warning: No CMS name supplied, setting CMS name to machine name.
Tue Jan 05 2010 16:26:42 GMT+0000 (GMT) Creating session manager...
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) Logging onto CMS...
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) err: ERROR Couldn't logon to CMS (STU00152)
Tue Jan 05 2010 16:26:43 GMT+0000 (GMT) err: Error description: The system jldbo1 can be contacted, but there is no Central Management Server running at port 6400.
(BOSERVER)/opt/BO_Ent_3.2/bobje/logging> cat boe_cmsd_10228_2010_01_05_16_20_23_484_trace.log
apsserver.cpp:1390: TraceLog message 1
2010/01/05 16:20:23.484|>>|A| |10228|1455542784| |||||||||||||||assert failure: (apsserver.cpp:1390). (0 : Unable to register APS with local nameserver).
Attempt to fix:
I shutdown BO servers and tomcat by running following:
/opt/BO_Ent_3.2/bobje/stopservers
/opt/BO_Ent_3.2/bobje/tomcatshutdown.sh
I then restarted BO servers and tomcat by running following:
/opt/BO_Ent_3.2/bobje/startservers
/opt/BO_Ent_3.2/bobje/tomcatstartup.sh
Connected to BO repositrory by running the following:
(BOSERVER)/opt/BO_Ent_3.2/bobje> sqlplus system/****@bocms
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jan 5 18:40:30 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Still getting same errors:
Thanks.

the port is not used:
(BOSERVER)/opt/BO_Ent_3.2/bobje> netstat -an | grep 6400
(BOSERVER)/opt/BO_Ent_3.2/bobje>
I agree the CMC server is not starting, is is related to this log:
(BOSERVER)/opt/BO_Ent_3.2/bobje/logging> cat boe_cmsd_3703_2010_01_05_16_02_18_556_trace.log
apsserver.cpp:1390: TraceLog message 1
2010/01/05 16:02:18.556|>>|A| | 3703|1455542784| |||||||||||||||assert failure: (apsserver.cpp:1390). (0 : Unable to register APS with local nameserver).
Wait ... it looks like the CMC server is now running. I see someone modified the /etc/host file. They commented out the following line :
#127.0.0.1 localhost junk1 junk1.much.com
Not sure how this would help the CMC start except now when accessing the host server junk1 the IP would change from 127.0.0.1 to the public IP. Perhaps the CMC server wanted to access the public IP and not the loopback. If that is the case perhaps this error would occur if the host file was modified anytime the CMC server was up and running, then when it bounced, it would have looked up the wrong IP since the host file was changed.
Thanks.

I have two issues. 1) unable to update Acrobat XI Pro and 2) unable to register product

First issue: I have for the second time installed Acrobat xi pro and then click on "check for updates" from the help menu. And it shows that an update is available. But when I update it I am given the following error message:
Error 1328. Error applying patch to file C:\Config.Msi\PT669B.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor."
When I click on "details" I am sent to adobe's "update error" page. Which states the following for error 1328: Error applying patch to [filename]. It's likely that something else updated the file, and the patch can't modify it. For more information, contact your patch vendor.
I have tried uninstalling program and re-installing program but still get same error message from my attempt at updating. So I am not sure if program is update or not. And I do not know who my "patch vendor" is.
Second issue: Unable to register product with Adobe. Because the option to do so from the "help" menu which lists "product registration" is greyed/dimmed out. Therefore not giving me the ability to register this product. Please let me know what is causing this problem.

I am not sure, but will suggest some things to try. On the activate issue, it may be that your system already thinks it is activated and so you might try the deactivate and check. If that works, I would suggest you then uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove anything left of the Acrobat folder, reboot, and reinstall. Hopefully you can open Acrobat and activate. Then do the updates from the Help menu.

Unable to register service Error while deployment

Hi All,
I am getting the following error while deploying. I have attached the log details and the WSDL. Please suggest how to resolve this error.
2010-07-26T17:11:37.828+10:00] [soa_server1] [NOTIFICATION] [SOA-21046] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea] [arg: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: true] Calling coordinator to update composite. base composite: default/ProcessData!1.0*soa_14ef45a1-847d-450b-aa18-a7eee66632ea, new composite: default/ProcessData!1.0*soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916, isForceDefault flag: true
[2010-07-26T17:11:38.254+10:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] Unable to register service.[[
oracle.webservices.provider.ProviderException: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:443)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:282)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:201)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:157)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:162)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.GeneratedMethodAccessor5638.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy262.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeRedeploy(StandaloneCompositeDeploymentCoordinatorImpl.java:62)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.overwriteExistingComposite(BaseDeployProcessor.java:375)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:222)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.webservices.provider.ProviderException: No service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.getServiceName(ProviderConfigImpl.java:604)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:339)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(ProviderConfigImpl.java:283)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:112)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addService(FabricProviderConfig.java:202)
... 43 more
[2010-07-26T17:11:38.265+10:00] [soa_server1] [NOTIFICATION] [SOA-21061] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916] [arg: /deployed-composites] Removing label soa_0c78781a-709d-4b7e-a8f6-ccbd9ac75916 in namespace /deployed-composites of MDS storage
[2010-07-26T17:11:38.272+10:00] [soa_server1] [ERROR] [SOA-21037] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IcD_uWX9xWD_n9G7yZ1CHweF000w^H,0] [APP: soa-infra] [dcid: 1cc699ed1d7ff4a3:-1e45b33a:129f87006e3:-7ffd-000000000000c092] [arg: Error during deployment: Update Failed: Unable to register service..] Sending back error message: Error during deployment: Update Failed: Unable to register service...
WSDL
<?xml version= '1.0' encoding= 'UTF-8' ?>
<wsdl:definitions
name="AVCadDataFeed"
targetNamespace="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:inp1="http://au/gov/vic/mas/ortd/Cadmsg"
xmlns:tns="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://au/gov/vic/mas/ortd/Cadmsg" schemaLocation="xsd/OdsCadMsg.xsd" />
</schema>
</wsdl:types>
<wsdl:message name="requestMessage">
<wsdl:part name="request" element="inp1:odsCadDataSet"/>
</wsdl:message>
<wsdl:portType name="livefeed_ptt">
<wsdl:operation name="livefeed">
<wsdl:input message="tns:requestMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:message name="headerMessage">
<wsdl:part name="header" element="inp1:customHeader"/>
</wsdl:message>
<wsdl:binding name="livefeed_pttSOAP11Binding" type="tns:livefeed_ptt">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="livefeed">
<soap:operation style="document"
soapAction="http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed/livefeed"/>
<wsdl:input>
<soap:body use="literal" parts="request"/>
<soap:header use="literal" part="header"
message="tns:headerMessage"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="OrtdService">
<wsdl:port name="Ortd_Port" binding="tns:livefeed_pttSOAP11Binding">
<soap:address location="http://vdatdlsoa02.mas.vic.gov.au:8001/soa-infra/services/default/ProcessData/AVCadDataFeed"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks
Edited by: user5108636 on 26/07/2010 00:19

I is till throwing error after changing <wsdl:service name="AVCadDataFeed">Because still there are problems in WSDL. Error description gives the detail -
Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/ORTDWS/ProcessData/AVCadDataFeed}AVCadDataFeed and port livefeed_pt.
Make sure that port attribute has right value.
Also, what should be the value of the <soap:address location attribute in the service elementFrom Web Services Description Language (WSDL) 1.1 specification (http://www.w3.org/TR/wsdl#_soap:address) -
The SOAP address binding is used to give a port an address (a URI). A port using the SOAP binding MUST specify exactly one address. The URI scheme specified for the address must correspond to the transport specified by the soap:binding.
<definitions .... >
<port .... >
<binding .... >
<soap:address location="uri"/>
</binding>
</port>
</definitions>
Regards,
Anuj

Windows XP - Unable to register with DCOM within the timeout limit

Just curious if anyone has run into iTunes server unable to register with DCOM within the given timeout limit?
Also quite often when I close iTunes, the process shutsdown but then 30sec - 2min iTunes opens its self right back up again. I ususally have to terminiate it from the Task Manager.
I am running the latest version of iTunes as of Sept 28th 1:30AM

have a look here http://www.grc.com/freeware/dcom.htm
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Unable to register my data warehouse in Service Manager

I have been trying to register my data warehouse but keep getting the same error message each time - "Invalid URI: the hostname could
not be parsed." I know the issue is on the ServiceManager database side of things, but there is not a lot of information related to this error message and the info I do find is unrelated to ServiceManager. I have gone as far as building a
brand new data warehouse server and reinstalling all of the data warehouse databases from scratch. It doesn't matter if I tried to register with the original data warehouse environment or the new environment, I get the same error message. I also
received a powershell command from Microsoft Support to help clean up any residual entries in the ServiceManager database that might be left over. At this point I'm at a loss on how to proceed. Anyone ever run into this issue?
Here's the event log message:
Unable to register Service Manager installation with Data Warehouse installation.
Data Warehouse Server: DW_SCSM
Service Manager Management Server: FlowSMRC
Exception: Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSServiceException: Invalid URI: The hostname could not be parsed.
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.executeHelper(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.UI.Core.Shared.PowerShell.PSHostService.Invoke(String cmd, Object[] input)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.DWRegistration.Registration.DWRegistrationHelper.AcceptChanges(WizardMode wizardMode)
Also, I tried registering the data warehouse using powershell Add-SCDWMgmtGroup and get an error saying that Cannot associate Service Manager installation on scsm_server with Service Manager Data Warehouse installation on dw_server.

Just got additional information about this error. If you run the following query in SQL pointing to the ServiceManager database you should see the name of the Management Server. The query is:
select * from MT_Microsoft$SystemCenter$ResourceAccessLayer$SdkResourceStore
There is a column named Server_<some GUID> that should contain the Management Sever NetBIOS name. If it has some other name, run an update query to ensure the column has the NetBIOS name of the Management Server. Restart the SCSM Console
and retry the Database Registration again and it should succeed.
Microsoft has said that this is normally caused by either moving the database or database server to another server and the value is never updated.
Try registering the DW Server again and see if you have better luck.

I am unable to register my debit card after creating my apple ID. Whenever i click enter after filling all the debit card details, it shows that, "your payement method has been declined". Please help me people, why is it so.?

I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!

The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store.

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please help

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

Error deploy SOA application "Deployment Failed: Unable to register service

Hi All
I have build a SOA application and tried to build and deploy to my SOA server but stuck with below error msg.
Step-1: Created the application, with BPEL components etc.
Step-2: Right click on the application, then Deploy -> To -> My Server..
Step-3: SOA build msg
Buildfile: F:\PF\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml
BUILD SUCCESSFUL
Total time: 5 seconds
Step-4: Deployment msg
+[03:09:24 PM] ---- Deployment started. ----+
+[03:09:24 PM] Target platform is (Weblogic 10.3).+
+[03:09:24 PM] Running dependency analysis...+
+[03:09:24 PM] Building...+
+[03:09:32 PM] Deploying profile...+
+[03:09:32 PM] Wrote SAR file to F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Deploying sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
+[03:09:32 PM] Processing sar=/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Adding sar file - F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:32 PM] Preparing to send HTTP request for deployment+
+[03:09:33 PM] Creating HTTP connection to host:9.184.173.34, port:8001+
+[03:09:33 PM] Sending internal deployment descriptor+
+[03:09:33 PM] Sending archive - sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+[03:09:53 PM] Received HTTP response from the server, response code=500+
+[03:09:53 PM] Error deploying archive sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
+[03:09:53 PM] HTTP error code returned [500]+
+[03:09:53 PM] Error message from server:+
Error during composite deployment: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: Deployment Failed: Unable to register service.: Deployment Failed: Unable to register service..
+[03:09:53 PM] Check server log for more details.+
+[03:09:53 PM] #### Deployment incomplete. ####+
+[03:09:53 PM] Error deploying archive file:/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
+(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)+
Also I have check the http://localhost:8001/soa-infra/ and it says*
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.0.0 - 11.1.1.1.0_090609.1407.5182 built on Tue Jun 09 15:06:41 PDT 2009
WebLogic Server 10.3.1.0 Wed Jun 10 22:24:41 MDT 2009 1227385 (10.3.1.0)
There are no composites deployed to the platform
Edited by: user11263460 on Dec 13, 2009 2:39 AM

If this still needed. Take a look in Your WSDL file - any references to schemas etc. Are they accessible on server? For example - XSD file have absolute file system link - change it to project level import (copy xsd file to project) or publish to MDS.

Curve 8520 os: 5.0.0.681 randomly crashing and only shows white screen and unable to reboot unless plugged in

Anyone else suffering from their curve 8520 os: 5.0.0.681 randomly crashing and only showing a white screen as well as it being unable to reboot unless it is plugged in? It often occurs when I'm playing media, using apps and maps. Had the same problem with my previous phone so it was sent in for repair and replaced but I'm still suffering from the same problem with the replacement handset! Any ideas how it fix this?
Thanks

Hello Me_Again
Welcome to BlackBerry Support Community Forums
Since you got a replacement it the same old Battery you are using or its a new Battery with your replacement device.Sometime this white Screen or unable to reboot happen because of weak battery .I suggest if you can arrange a good quality Battery then try running your device a few hours to see if the problem is within the device or its just Battery issue.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Unable to Register Porsche 9981

Hi, Need help,
1. Unable to register the device on the network,
I have tried all possible solutions available in the Forums.
I have updated the OS to 7.1 through the desktop manager
The diagnostics pass all tests except Blackberry Services where it waits for 90 secs & error is FAIL.
The BIS ACTIVATED sim cards carrier Airtel & Vodafone are working on BB 9900 & BB9780 BUT FAIL ON THE PORSCHE 9981
The HRT table is empty despite numerous attempts to register it.
The carrier BIS website fails to detect the new device,
Blackberry India will not support Phones purchased outside the country

Well, from here, we can only guess...so here are some possibilities:
Your BB is not truly unlocked...please check this helpful thread for information:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Your BB is, for one reason or another, registered inside of another carriers BIS system. Each BB can be registered into one, and only one, BIS system in the world at any given moment. If this is the case, what would happen is pretty much exactly as you describe. While running on the India carrier data network, no BIS Services are available since they cannot create a BIS account for you. But, when you activate WiFi, BIS services become available...but they are not coming from your India carrier...rather, they are coming (via WiFi) from that other carrier. Until that other carrier releases the BB PIN from their BIS system, the India carrier will be unable to enable any data services for you. But, the India carrier certainly should have been able to tell you that they could not create a BIS account...
But, from all you have described (especially the lower case edge/gprs), the problem resides on the carrier side...there is typically nothing the end user can do to resolve this situation. The carrier(s) must do so.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Deployment Failed: Unable to register service. 11g

Hi ,
i am using JDev version 11.1.1.3.0. While deploying a composite i got th efollowing error. can someone please let me know :
Error during deployment
oracle.fabric.common.FabricException: Deployment Failed: Unable to register service.
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:37)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:359)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:219)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.fabric.common.FabricDeploymentException: Unable to register service. {rootCauses=[]}

If this still needed. Take a look in Your WSDL file - any references to schemas etc. Are they accessible on server? For example - XSD file have absolute file system link - change it to project level import (copy xsd file to project) or publish to MDS.

Akamai NetSession Interface failes to install client: Unable to register Control Panel. Aborting installation.

I am trying to eval SQL Server 2014 for use on a new BI project that we starting. However, the first step, downloading and installing the Akamai NetSession Interface (download mgr. ) is failing to install on my laptop due, as it raises the following error
message: " Failed to install client: Unable to register Control Panel. Aborting installation." I have tried running it as Administrator, and granting my ID security to run it. Both tasks failed to get it to install.
Can you please help me get beyond this roadblock?
kwh

Hello,
Please login as an administrator and follow troubleshooting instructions provided on the following article:
http://www.akamai.com/html/solutions/downloadmanager_faq.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Skgmdetach - Unable to register unmap

Hi,
I have a problem with a Oracle 10.1.0.2.0 Database.
The database runs about three months without a problem.
Yesterday the database crashed and I found the following in
the alert-logfile:
"Warning: skgmdetach - Unable to register unmap, error 4210"
I found nothing to explain this message.
Please help!
Thanks

Hi,
here some more informations.
Oracle Database 10g Release 10.1.0.2.0 - Production
Windows Server 2003 Version V5.2
CPU : 2 - type 586, 1 Physical Cores
Memory (A/P) : PH:1329M/2047M, PG:3326M/3947M, VA:1737M/2047M
This is the original logfile:
Mon Sep 19 03:01:08 2005
ARC0: Evaluating archive log 3 thread 1 sequence 2035
Committing creation of archivelog 'D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\LEIMER\ARCHIVELOG\2005_09_19\O1_MF_1_2035_1LW3GNMT_.ARC'
Created Oracle managed file D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\LEIMER\ARCHIVELOG\2005_09_19\O1_MF_1_2035_1LW3GNMT_.ARC
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Mon Sep 19 03:02:34 2005
Warning: skgmdetach - Unable to register unmap, error 4210
Starting up ORACLE RDBMS Version: 10.1.0.2.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 83886080
large_pool_size = 8388608
java_pool_size = 50331648
control_files = D:\ORACLE\PRODUCT\10.1.0\ORADATA\LEIMER\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.1.0\ORADATA\LEIMER\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.1.0\ORADATA\LEIMER\CONTROL03.CTL
db_block_size = 8192
db_cache_size = 25165824
compatible = 10.1.0.2.0
log_archive_format = ARC%S_%R.%T
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size= 21474836480
db_flashback_retention_target= 600
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=leimertestXDB)
job_queue_processes = 10
background_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\LEIMER\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\LEIMER\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\LEIMER\CDUMP
sort_area_size = 65536
db_name = leimer
db_unique_name = leimer
open_cursors = 300
pga_aggregate_target = 25165824
Mon Sep 19 03:04:56 2005
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
PMON started with pid=2, OS id=2160
RECO started with pid=8, OS id=2184
DBW0 started with pid=4, OS id=2168
CKPT started with pid=6, OS id=2176
SMON started with pid=7, OS id=2180
CJQ0 started with pid=9, OS id=2188
LGWR started with pid=5, OS id=2172
MMAN started with pid=3, OS id=2164

Unable to locate labview run time engine (lab view 8.5)

Hello I have a problem whit the labview 8.5 installer. I have created I project with included a .vi file (a simple panel wich control a serial port, with parameters (baud rate, stop bits, ...)), then I have created an application for this file (.exe) and then the installer (I have included the labview run time engine 8.5). When I run the setup.exe I have the following error message:
Unable to locate labview run time engine, the application require a labview run time engine 8.5 or compatible...
What I'm missing??
Thanks
Maurizio

are there one other reasons why it would not work. I have asimilar problem.
I intsalled version 8 of run time engine and acrtivated software. Now I am trying to run compiled application provided to me by third party.
When I click on application it says
Unable to locate LV run time engine
Test server requires a version 6.0 or compatible LV engine.
How do I know if the engine I installed and activated is running and is it supposed to be able to execute a program which is expectin rev 6 of the rund engine?

Unable to register unless running linux

Similar Messages

Maybe you are looking for