Unable to reinstall WSUS on SCCM 2012 Server

I'm trying to reinstall WSUS on my SCCM 2012 Server after having removed the SUP role from SCCM and then following
these steps to remove WSUS from the server. However I am not able to reinstall WSUS. I also tried all of the steps outlined
here but no luck. Here are the results from the WSUSSSetup.log:
2014-05-05 12:16:44 Success   MWUSSetup          Detected that setup was launched through Server Manager
2014-05-05 12:16:45 Success   MWUSSetup          Validating pre-requisites...
2014-05-05 12:16:45 Error     MWUSSetup          Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
2014-05-05 12:16:45 Error     MWUSSetup          WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
2014-05-05 12:19:05 Success   MWUSSetup          Initializing installation details
2014-05-05 12:19:05 Success   MWUSSetup          Skipping Asp.Net install since not running on win2k3...
2014-05-05 12:19:05 Success   MWUSSetup          Installing wYukon using ocsetup
2014-05-05 12:19:05 Success   MWUSSetup          Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
2014-05-05 12:19:16 Error     MWUSSetup          The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
2014-05-05 12:19:16 Error     MWUSSetup          ExecCmd failed (Error 0x80070643: Fatal error during installation.)
2014-05-05 12:19:16 Error     MWUSSetup          Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error
during installation.)
2014-05-05 12:19:16 Error     MWUSSetup          CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
2014-05-05 12:19:16 Error     MWUSSetup          CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
2014-05-05 12:19:23 Error     MWUSSetup          DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
I am at a loss, any suggestions would be greatly appreciated. Perhaps I can try installing SQL express and use that as my database rather than WID, since the problem appears to be with WID installation?
Shaun

Another question then - is it okay to have WSUS reside on the same server as SCCM, but without using SCCM SUP role to manage updates?
I would strongly discourage it. If you're using a single Configuration Manager instance, then most notably ConfigMgr installs an SSL-enabled Management Point website which has been known to interfere with a non-SSL standalone WSUS server.
But perhaps more importantly, looking for the long term, if at some point you determined you wanted to enable a Software Update Point, you'd be backed into the corner with your standalone WSUS already installed on the Site Server.
Converting an in-use WSUS Server to a SUP is fraught with complications, the least of which is being without a patch management environment for some period of time whilst you "convert" from standalone WSUS to ConfigMgr Software Updates.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

Why is it not possible to move a SCCM 2012 Server to a new Domain?

Hello everybody,
I know it is not supported to move a SCCM 2012 Server to a new Domain. But I am still missing why it is not supported or possible....
I could not find anything that explained it in detail on the forums/internet. So when the question comes up in front of a customer it is always better to have a good argumentation...Can somebody describe the reasons why??
Thank you very much in advance!

Have them call CSS then.
It's ultimately the result of the design of the product but not an explicit decision. To my knowledge, it relies on the domain name for certain things and this is explicitly embedded with no defined way to change this. Could it be changed? Probably.
But, that would take a lot of work and effort and is not something Microsoft has ever invested any time in.
The grass is green and the sky is blue. Knowing why doesn't change these.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

Migrate SCCM 2012 server

I have a working Primary SCCM 2012 SP1 server in my environment. Now company has aquired another company which is in another domain and forest. We are in the process of migrating them to our domain.
Problem is another company already has an SCCM 2012 server with 300 client and they want to join that server to our existing SCCM 2012 primary server and they want to manage the patches and OSD through it.
Can someone please guide how can we add their server to our primary server and where can we give them access to manage their environment

Nothing to guide, what they want is not possible: not only can you not change the domain membership of COnfigMgr site server/system but you cannot join a primary to another primary in 2012. It also makes no sense, that's what RBA is for in ConfigMgr 2012.
Jason | http://blog.configmgrftw.com

WSUS and SCCM 2012

I'm finally getting around to trying to integrate WSUS with SCCM 2012 - i.e., to begin using SCCM 2012 to manage and deploy all Microsoft updates rather than using plain old WSUS as I have in the past.
My first impression is that it's much more complicated than using WSUS alone. That said, I'm wondering now what are the advantages of using SCCM 2012 to manage Windows Updates rather than using WSUS? So far, I've added all of this complexity to the
process, but I'm not seeing the added benefits after having gone through all this. Anyone else agree?
I'm about to just trash the whole thing and go back to doing it the old way. Thoughts?
Shaun

Jorgen summed it up nicely here:
http://ccmexec.com/2012/08/top-11-reasons-why-you-should-use-configmgr-2012-for-managing-software-updates/
Jason | http://blog.configmgrftw.com

Can we re-activate Adobe patches once expired in SCUP and syncronized to WSUS and SCCM 2012 as expired?

Hi,
I expired a couple of Adobe patches in SCUP and published them in WSUS. They got synchronized in WSUS and SCCM as expired. After about two weeks those expired patches got cleaned from SCCM ( at least from UI).
I want to activate them again in SCUP and re-publish as active patches in SCCM. But its not working - I've tried WSUS cleanup and SCUP cleanup already!
Is there any way to re-active expired patches published by SCUP in WSUS and SCCM ? & How?
Excerpt from SCUP.Log:
PublishItem: Item 'Reader Multi Lingual User Interface 10.1.4 Update (UpdateId:'5c22235f-a3d9-48db-95eb-a60ec1886e8e' Vendor:'Adobe Systems, Inc.' Product:'Adobe Reader')' is on the update server and is expired, no publish actions are possible.

The key here is knowing WHY those updates were "expired" in the first place.
Most likely they were expired because they superseded another update. If so, merely duplicating and publishing won't achieve anything, because the duplicated/re-published update will also be superseded and get promptly expired again.
Ergo, if expired because superseded, the superseding package will need to be customized to remove the supersession references and it also will need to be republished, which also means that certain other considerations may need to be taken as well ... such
as the fact that you now have multiple packages that will conflict with one another that no longer have the requisite supersession metadata.
Regarding this scenario. Configuration Manager 2012 introduced the option to NOT EXPIRE superseded updates, or to defer the expiration for a specified number of days. This is not a SCUP thing; it's a ConfigMgr thing.
Configure the ConfigMgr product to behave the way you desire. Problem solved. :)
If YOU actually expired them in SCUP... then just UNEXPIRE them and republish. Shouldn't be any need to duplicate and republish. This is what Microsoft does all the time. Expire Update 'A' Rev 100 on Monday; publish Update 'A' Rev 101 on Patch Tuesday.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

Moving SCCM 2012 Server and DB to New Hardware

We're planning to move our SCCM 2012 SP1 installation to a new VM running Server 2012 R2. We're planning on keeping the same server name so the Site Backup and then restore looks like it will work for us. We'd also like to move the DB to a new, remote, SQL
2012 box. Does the DB need to be restored to a SQL box with the same name as well?
Orange County District Attorney

No sql does not need to be reinstalled on the same server but you might want to do it as a two step process. Move SQL then move the CM server.
http://www.enhansoft.com/

Legacy WSUS GPOs & SCCM 2012

Good Afternoon All -
We are in the process of introducing SCCM 2012 onto our production network. Currently, we don't use WSUS to it's full potential, yet still have a few GP's that configure some of each workstation's update settings such as update location, frequency,
reboots, etc. Eventually, all of this will be taken over by SCCM, though.
Questions
1. Will SCCM's Client / SUP settings override and Group Policy for WSUS, does a GP win out, or is it a toss up?
2. When (assuming it's needed) do these WSUS policies need to be changed and/or disabled? Previously, I believe that I've just disabled any existing WSUS policy and let the SCCM client configure each machine.
3. So that there's no window where clients may NOT be configured how we want, would the best thing be to be configure SCCMSUP policy, deploy the clients, then change / disable WSUS GPOs?
4. If SCCM is configured the way we want, is there any need for any SUP related GPO's to exist for managed clients? (Besides the SCUP WSUS one which enables "Allow signed content from
intranet Microsoft update service location”)
Thanks for your help!
Ben K.

I've found that even though a GPO should overwrite the Local Policy set by SCCM this isnt actually the case.
If you look at the WUAHandler.log file you see entries for the following
Enabling WUA Managed server policy to use server: http://MYSCCMWSUSSERVER.MYDOMAIN.COM
Waiting for 2 mins for Group Policy to notify of WUA policy change...
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server http://GPOsetwsusserver
Failed to Add Update Source for WUAgent of type (2) and id ({9F08A663-567F-4A1A-8F1A-F56DF97D3E66}). Error = 0x87d00692.
theres an MS blog on the issue here
https://blogs.technet.com/b/sus/archive/2008/12/02/wuahandler-log-failed-to-add-update-source-for-wuagent-error-0x80040692.aspx
The options are
1. Remove the group policy at the domain level
or
2. Use the same WSUS server as the Software Update Point for the SCCM as well
Thats not very helpful in my scenerio as I'd like to keep the SCCM client installed for software metering & reporting, but i'd like the WSUS server to be set by GPO for these specific computers as their updates are managed by a vendor because
of the be-spoke software running on them
MCP, MCSE, MCSA, MCITP, MCTS, MCDST

WSUS with SCCM 2012 - Products Missing, and Best Practices

Good morning all
I am integrating SCCM with WSUS, and I have a few questions regarding products. I've noticed when running through the "Add site system roles wizard" in SCCM 2012 console that when I go to "Products" it does NOT list a few major
products, such as office 2013, sql server 2013, exchange 2013, etc.
Am I missing something? I'm sure I am...what do I need to do?
Also, if there are any other gotchas or best practices you all can point me in the right direction as far as managing SCCM / WSUS together i'd be greatly appreciated.
Thanks so much!

Do not use WSUS Console to manage the updates. All you things you can finish is in the SCCM Console. Refer to the link posted by Jason.
Juke Chou
TechNet Community Support

Offline SCCM 2012 Server

OK I have SCCM 2012 R2 installed in a lab which is alowed internet access.
I have SCCM 2012 R2 installed in our live environment which does not have ANY internet access.
I run a sync in the lab which completes successfully and I can see a nice long list of updates in the SCCM console.
I copy WSUSContent folder from lab to live environment. (well I get it moved over, its a process)
I then run wsusutil and export copy the move the cab and log files over
I run import and it claims to have run successfully
However no updates are listed!! What step am I missing? Need halp asap PLEASE

You need to run the Sync from SCCM console manually. If still no updates, you need to check the log file wsyncmgr.log.
Juke Chou
TechNet Community Support

Unable to reinstall WSUS on air-gapped Windows Server 2008 R2 SP1 server

A co-worker installed WSUS on an air-gapped (not connected to the Internet) server running Windows Server 2008 R2 SP1, but he wasn't sure he'd configured everything properly, and asked me to uninstall and reinstall it. The uninstallation went without
a hitch, but reinstalling through the Server Manager gives the error message "The update could not be found. There may be a network connection issue." The Server Manager log shows the following:
8632: 2014-04-25 15:30:22.578 [Provider]                  System changed since last refresh: False
8632: 2014-04-25 15:30:29.489 [InstallationProgressPage] Loading progress page...
8632: 2014-04-25 15:30:29.520 [InstallationProgressPage] Creating WindowsUpdateDownloader.
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Searching for Updates...
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Starting asynchronous download.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Creating session.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
8632: 2014-04-25 15:30:29.582 [WindowsUpdateDownloader]   Searching....
8632: 2014-04-25 15:33:07.906 [WindowsUpdateDownloader]   Search failed, HRESULT: -2145107924, message: Exception from HRESULT: 0x8024402C
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Search completed, result: Failed.
8632: 2014-04-25 15:33:07.921 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Download completed, result: NotStarted.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for
more information.</a>'
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Invoking LoadFinishPage.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] About to load finish page...
8632: 2014-04-25 15:33:07.937 [InstallationFinishPage]    Loading finish page
8632: 2014-04-25 15:33:07.953 [InstallationFinishPage]    Finish page loaded
Any ideas?

Hi,
0x8024402C WU_E_PT_WINHTTP_NAME_NOT_RESOLVED
Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name cannot be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED.
Stop/Restart service or reboot the machine if you see this error frequently.
Since the server is not connect to the internet, at least it should have an available upstream server. Did you configure it correctly? The error message indicate that the
name could not resolved, make sure you can resolve the name of the upstream server. Run nslookup check the result.
If it is the only WSUS, then give it internet connection and test.
Hope this helps.

SCCM 2012 & Server 2012 Dedupe

I’ve come across
a problem
recently with SCCM2012 on a server using Win2012 Dedupe.
We have been using the dedupe functionality & found huge savings, however have since had problems crop up with importing drivers for OSD.
After some digging around, we found a forum post saying that SCCM doesn't support reparse points which are used by Server 2012 Dedupe.
I’ve been unable to track down any more concrete information about this so wondering if anyone had more information about this lack of support & what it affects within
SCCM2012? E.g. is it only driver imports affected (in which case we can just exclude the drivers folder from dedupe), or should other folders (or the entire content volume) not be deduped.
Also, would this still apply if hosting source files on a remote file share that is using dedupe?
Cheers!

I'm unable to browse that link, I get a "page not found or you don't have permissions" error.
Checking through the open items on the feedback page for ConfigMgrVNetxt i couldn't see it either.
Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution? This blog post will help you find the right connect page.
http://www.enhansoft.com/blog/microsoft-connect-and-page-not-found-error-message
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

My SCCM 2012 server is listed in the Windows updates local policy

On my end user computers Navigate to Computer Configuration > Administrative Templates > Windows Components > Windows Updates > Specify intranet Microsoft update service location
Does it specify your Primary Site server? YES
Endpoint Protection leverages the software update component of ConfigMgr for delivery of definitions. This local Windows Updates policy was created when you configured this component.
1. How do I disable this local Windows Updates policy in SCCM ? Thanks

The client will set these local policy settings if your Client Settings are set to manage software updates and you don't have a group policy in place.
If you do NOT want ConfigMgr to control updates, then you can go to Client Settings > Software Updates and change "Enable software updates on clients" to No.
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Unable to reinstall WSUS on SCCM 2012 Server

Similar Messages

Maybe you are looking for