Unable to reinstall X-FI Fatality Platinum Champion series..
<Unable to reinstall X-FI Fatality Platinum Champion series.. ok seeing as i got no response at all in my other post here>>>> http://forums.creative.com/t5/Windows-7/X-Fi-Platinum-Fatality-Champion-Series-Win-7-x64-Error-I-000/td-p/547599?and now i have a new problem.. i started a new thread..
so since waiting for a response here i've noticed that along with my other problems that every now and then that a speaker here and then used to drop out.. then just a little while ago i noticed that i coudn't get anything other than the 2 front speakers on my Z-5500's to work.. so i decided to uninstall and reinstall everything related to the card..
well just now i uninstalled all things related to my creative card?through the uninstall programs feature?in the control panel.. then ran driver sweeper.. rebooted.. then driver cleaner.. rebooted.. then ccleaner.. rebooted.. then i repeated this process again in safe mode.. then i went to the device manager and removed the x-fi as it was still listed and the multimedi audio controller.. everything went ok.. or so i thought..
rebooted and began reinstalling the drivers listed as "COMPATIBLE" with Win7 x64.. but i noticed when installing the 2.8.003 driver that it took mere seconds for the sri'ver to install.. rebooted and still no sound.. installed the rest of the drivers and apps listed for my setup and still no sound.. also i noticed over half of the icons in the programs menu never even installed..
long story short i repeated all the steps mentioned above and tried the drivers from my Vista install disc and got an error saying that the drivers were not compatible with my operating system and was only given the option to exit..
any and all help would be greatly appreciated THX!!
Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.
Similar Messages
-
X-fi fatality platinum champion series windows xp
recently installed my sound card onto windows xp service pack 2, i've installed all the relevant drivers, it doesnt seem to read the x-fi, well it does but not to make it work. just reads the sb x-fi audio [9c00[
Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks. -
Sound Blaster Titanium Champion Series
&?Hello,
I recently bought a Sound Blaster Fatality Titanium Champion series cound (the one with the front panel included).
Sound and everything seems fine. One very annoying issue (not for me but mainly for the other people who are listening to me on Ventrilo) is that they hear a constant "buzzing" noise when I speak. I can't seem to get rid of it.
It was actually worse before as I was able to hear the constant buzzing too. Until I unplugged the mic and audio jack from the back sound card and plugged it into the front panel instead.
I also updated to the latest drivers as far as I can tell.
Any idea on how to fix this?
I am using a Sennheiser PC360 Headset. I don't believe it is the headset's issue, it works fine on my other systems without the constant buzzing.
Many thanks in advance.Eljher,
Sorry about that, Customer Support do not monitor these boards. Please write to them here. -
I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
What I don't understand is this: I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine. Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop. 1) Why did it work before and it's not working now? 2) Is there anything I can do that does not involve reformatting the hard drive?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
The certificate on my applications install DVD for bundled software has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help. If I use Lion, it works fine with the expired certificate. But doesnt work with snowleopard.
Create a DMG file of your DVD (instructions here: http://www.wikihow.com/Make-a-DMG-File-on-a-Mac).
Then follow the instructions here: http://managingosx.wordpress.com/2012/03/24/fixing-packages-with-expired-signatu res/ -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
I am unable to reinstall itunes. I get the message that it was not installed correctly. I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO. I get a error message that it's "Windows error 126". Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
Help!Click here and follow the instructions.
(98993) -
I had iPhoto as part of iLife 11. I recently did an erase and install on my Macbook Air and without a CD drive I'm unable to reinstall. How can I install without having to repurchase all of the apps?
Do you have access to another Mac with a disk drive? If so you can do it in one of two ways:
1 - on the Mac with the optical drive launch Disk Utility and make a disk image of the iLife 11 disk. Connect the two Macs together and transfer the disk image to your MacBook Air. Mount the disk image and install from it. I have my iLife disks saved that way for quick and easy reinstall when necessary.
2 - connect the two Mac together so you can access the MBA from the Mac with the disk drive. Insert the iLife disk, and install from the second Mac to the MBA. -
I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.
Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible. -
Licensing has stopped working/unable to reinstall
I have been using Creative suite CS3 for years now. Recently, I got the Licensing has stopped working error message. Im running windows vista 64 bit. I tried the License recovery tool on the adobe website with no luck. So I completely uninstalled CS3 and now I am unable to reinstall it.
Uninstall went fine, I restarted my laptop afterwards etc... Now I'm trying to install from scratch. During install I get the error message that the file AdobePDF.dll is needed.
The adobe website makes the solution seem very simple, 3 steps.
1. When the error occurs, click Cancel to exit the dialog box and continue with the installation.
2. Install the Microsoft has Hot Fix as documented in Microsoft article #930627 available at http://support.microsoft.com/kb/930627.
3. Update Acrobat to version 8.1 or later. The Acrobat update is available on the Adobe website at www.adobe.com/support/downloads/.
I do step one. Installation completes and I am told that Acrobat has installed successfully but photoshop, illustrator, indesign, bridge etc have not. And I do see the Acrobat Pro icon on my desktop and it appears to have installed correctly. However, when I launch acrobat, I am told that acrobat can not be opened without opening one other creative suite application such as Photoshop.
So I move on to step 2. I followed the install link specifically for windows vista, but am told that the update does not apply to my system.
step 3- I tried to download an acrobat update, though it was hard to determine If I was doing the right one, (I did the Adobe Acrobat 11.0.01 Pro and Standard update - All languages) but I got an error message telling me that "
The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
Any suggestions for this mess? Prior to the original issue, I was using CS3 almost daily, and I did not make any changes or updates to my system that I know of. I even tried system restore before I even uninstalled CS3.Creative Cloud Cleaner Tool
Run it, then reinstall. You will still get the failed install, so this time uninstall again and reinstall another time. There's a bug in the installer that requires all this hocuspocus of doing things twice. And unless your life depends on it, leave out Acro 8 to avoid that other issue.
Mylenium -
I am trying to re install snow leopard but i keep getting an error saying unable to reinstall
I am trying to revert back from Lion to Snow Leopard as i am not that happy with Lion yet.
Everytime i place the Snow Leopard DVD in & restart & press "C" after around 5 mins i get a screen propt saying unable to reinstall apple operating system
The disc play fine normally
N66Do you have another drive you can install SL on? If so, you can try installing SL on a 2nd drive, boot from that drive and use Migration Assistant to move your Apps and Data back from your Lion disk. I have not tried this, but see no reason why it should not work.
-
I had Itunes on my PC (Windows Vista, 64-bit) and it worked fine with my Ipod. I purchased an Ipod nano, and it was not recognized by Itunes and I was instructed to un-install and re-install. After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424.
I am also having trouble with Windows Updates, and receive the same error message: 80070424. Perhaps the 2 issues are related?
If anyone is able to help resolve the issue so I can successfully install Itunes, I would greatly appreciate it!I ran the sfc /scannow command, and yes the response was: Windows Resource Protection could not start with the repair service.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
W500 not starting - HELP - unable to locate BIOS ROM; Fatal error during GPU init
hi gurus,
Following problem:
when i start W500 (ubuntu) it stays with the black screen, not even displaying initial ThinkPad message, where you might press the ThinkVantage blue button, to go to BIOS. It just stays black and does nothing.
Than I press Power button for a few seconds to shut it down and try again. Still black screen.
The same procedure again and again and sometimes W500 boots up, sometimes wants to go to recovery mode, sometimes not.
Sometimes, after the black screen it displays the message:
Invalid ROM contents
ERROR Unable to locate BIOS ROM
Fatal error during GPU init
Anyone had the same problems?
What are the possible checks i might execute, to check up W500?
cheers
lenowiowUpdate: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.
-
Unable to reinstall Microsoft Office 2008
The Genius Bar reinstalled my operating system (Mavericks). I have been unable to reinstall Microsoft Office 2008 for Mac. It doesn't seem to even be able to read the CD. Should I be able to install Microsoft Office 2008 or will I be forced to upgrade to 2011?
My experience with Microsoft Office on the Mac is that when reinstalling an operating system, Office asks you to resupply your authorization credentials. As I recall, that is something like a twenty character code that identifes you as a legitimate purchaser.
Once your Mavericks was reinstalled, how did you recover whatever you had on your machine previously? Was it still in place? Did you recover it from a backup? Did you attempt to run Microsoft Office from either the backup or where it had been before attempting the CD approach? -
Just upgraded my MacBookPro to OSX Mountain Lion. Now unable to reinstall Capt.Installer driver for my Canon LBP3010 printer. Same Capt.Installer was used in previous OS.
Got message that the software was not obtained from Apple or trusted source.
Anyone can help solve this issue, do not wish to purcahse new printer, and Apple does not appear to be friendly to meApple is still friendly, only became more protective - for your very best. Right-click on the installer, then "Open", and then you get a window offering you the option to run it. That's a ML feature. Again, for your protection.
Independently, and as not only with Apple, a new OS X is sometimes different, and ML is that bit "pickier" with fully compatible software. So, even if your driver ran under Lion, it can be that it won't under ML. In that case please check Canon's website if they have a newer ML-compatible version, If not, also go and blame Canon. It's their responsibility to provide up-to-date drivers, not Apple's.
Good luck.
Maybe you are looking for
-
hello,i need some help! i can't go to a store and fix the problem cuz i lost the guarantee i got when i bought the iPod.. i have an iPod nano, i think its the first one.. its thin and tall and not wide:P.. it always used to work but in the past three
-
BPM Workspace with JASPER. Please help!
Hi all, Can someone please guide me to documentation with examples of where I can find integration steps of BPM Workspace with Jasper for reporting purposes? I tried googling on the same but could not find anything in particular. Thanks
-
Hi, I'm not sure if I should ask this question in this forum or use the Adobe Javascript forum. I have a form that needs to have a javascript in it. I have Adobe Acrobat X. What I need it to do is this: If a user entered a Posted Speed in the Text
-
How to create reports in java swing
I am doing an offline project for that I need to show daily report, weekly report and monthly report how to display a report in my application. Please show me with coding
-
TS3694 HELP. i keep getting error 3194 when trying to restore my iphone 4s
any body know how to fix this problem??