Unable to release production order
E C2 009 1 1 1000962 Order 1000962: Release rejected
E CO 118 1 1 Release of order not possible
Hi Kumar,
Did you maintain material availability check and if material missing then release should be rejected?
if yes and you want to maintain above then without stock you cant release the Order.
If you want to release without material then check in No check in material availability t.code opjk
Thanks
Bala
Similar Messages
-
System Status WCRE is active unalbe to release production order
Unable to release production order,
System status is WCRE is active.Hi
WCRE - Indicates Workcenter Until Release.
Please check the status of you work center
Go to CR03 transaction, In the Basic Data view check click on Admin Data to view the status if it is in Locked Status.
Regards
Venugopal -
How get all released production orders
Hi experts,
I need to get all released Production Orders for a specific plant. I noticed that usually you don´t select directly from table AUFK. Most of people use function module WCFS_STTXT_GET to get the status of an order. I know that table AUFK has fields ASTNR (status) and PHAS1 (released) however those fields don't reflect the status of an order (thatu2019s why WCFS_STTXT_GET is used).
Also, I know that table JEST contains status for an order; however, for a simple order that table shows more than one status (I guess is like a history of all status the order had).
So my question is: How can I get all released orders for an specific plant? If I use WCFS_STTXT_GET I would have to select all orders and check the status one by one, which is obviously not efficient at all.
Thanks!Hi Carlos,
As far as i know, it is not possible to get the latest status on a production order. if we see a production order in CO03, we see that all the status' are displayed on the order which it has been through.
I remember we had to include the system status logic similar to the transaction COHV, and we had used the table JEST for the same.
Kindly update the solution if you find any.
Thanks. -
Material shortage ( soft or hard error ) while releasing production order?
Hi Guys
I am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage.
My BDC program can't afford any hard errors in the process. The execution stop abruptly for any hard error.
How to change that Material shortage from hard error to soft error or any info message.
Any ideas? any thing to do with material master or spro?
Thanks
HariHi
You can make settings in SPRO, so that the material availability check will not restrict you to go further...
follow the path:
SPRO>Production->Shop floor control>Operations->Availability Check-->Scope of check
There you will find the settings for order creation and release (1 & 2)..
You have remove the restriction there.
Regards
Bala -
Abap dump error while release Production order
Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
KamalHello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea -
Error while releasing Production order
Dear experts
I am getting error "JV Object Type Is Required by JV Parameters for Company '1000'", message = Message no. GJ118 while releasing Production order. Plz help me on this issue.Hi Harish,
Please refer the below link, hope should be helpful
Creating a Cost Center -
Change of sales order in combination with planned/released production order
Hi Guru's,
How do you deal with changes in the sales order in combination with planned orders and the scenario how to deal with release production orders?
Can you tell me the SAP scenario, technically or reports or transactions or user exits, etc?
Thank you in advance,
EricHere You have 2 scenarios
1. Sales order changed at planned order stage
In this case any chagne of quantity done in the sales order level will be taken care by the Planned order until it was not firmed .
In case if it was firmed for the increased qty you will get a new planned order getting created.
In case if it is reduced and if it was unfirmed it will get changed accordingly
2. Sales order changed at production order stage
if the planned order was converted to production order change we can manually changes the respective Production order util no confirmation was done to any operations..
is all this scenariors you are looking for if it is helpful let me know
thanks..
dskumar -
Releasing production order using workflows from outlook.
Hi ,
i am working on workflows and my scenario is whenever production order creates it will send mail to approver in his/her outlook. And approver will approve/reject from outlook only by just clicking on approve or reject tab.
As of now mail is coming from SAP to outlook but the problem is how to release production order by just clicking on approve or reject tab in mail.
please help on this its urgent.
point will be awarded.
Edited by: Rahul Bhasin on Dec 27, 2007 7:00 AMHi satish,
Thanks for ur reply first .
as u told me create an event for relaesing production order , but as per my knowledge event are somethings that gets trigger at some point like creation , deletion. with events one cannot process things those are only for alerts so please confirm the same and how to process it.
Thanks,
Rahul -
Add/change multiple operations on a released Production Order
How can I add/change multiple operations on a released Production Order...I know how to add them manually one by one but is there a better way to add...like copy/paste since i am adding operations from an alternate route? Please advise?
Hy Aziz,
In process order go to operation screen go to Operation - Include Master recipe, then one pop up comes select required Master recipe and add operations of your interest.
But there are some restriction which doesn/t allow it if Inspection Lot, Control Recipe are created..
Regards,
Dhaval -
Capacity Requirement From Released Production Order
Hi PP Gurus,
Can i limit capacity requirement only from released production order ? I don't want to count requirement from production order that just created but not yet release.
Regards,
Arman LieDear Arman,
As a standard practice the system creates the capacityrequirements once the production order is created.
Check this,
When a production order is created the following actions are carried out:
· A routing is selected, its operations and sequences are transferred to the order
· The bill of materials is exploded and the items in the bill of material are transferred to the order
· Reservations are generated for bill of material items held in stock
· The planned costs for the order are generated
· The capacity requirements are generated for the work centers
· Purchase requisitions are generated for non-stock items and externally-processed operations
Regards
Mangalraj.S -
Cannot release production order for a plant
Hi:
When I try to release a process order , I get this error message:
"CAnnot release production order for plant".
I get this message for a particular material in the plant. For other materials, it's working fine.
Please give your suggestions!
GauthamHi,
Check the Tasklist usage for your routing for that material.
For this usage ,check in op45 against the task list type whether until release indicator has been enabled.If so remove
and do the release.
or
check whether workcenter which is used for producing the material has been locked in work center itself.
Indicator: Usage only until release in orderIndicator used to specify for a task list usage and a task list type that an operation in the order cannot be released. This occurs when a work center group that is not intended for production is allocated to this operation.
When this type of operation in the order is released you must enter the work center where production should take place.
Regards,
nandha -
Unable to release planned order for single line from MRP workbench
Hi
We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
User want to release a specific line but no new requisition is generated
It is highly appreciable if anyone could help to resolve this issue
Appreciate the Help
Regards
VKPKIt sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org
-
Don't release Production Order for negative stock.
Actually i don't want Production Order to be released, if component (child) items falls into negative stock. Is there any solution for that. If yes, please help me out.
ThanksHI!
you can write a SP to block Release a production order from planned state.
Check the onHand stock of all child items w.r.t the warehouse and block updating the status to release -
Error at time releasing production order
Hi guru,
I am creating production order manually but at the time release i got error"No product cost collector could be deterimined for material " in material master i will check mRP -4 but there activation for REM. I am not get this exactly what happen, Pl do needful.
With regards,
Ravindra.Dear Ravindra,
It seems for the production order type which you are using in CO01 has the order type dependent parameters where the check
box for product cost collector has been included (in the third tab - controlling).Check the setting in OPL8 for the production order
type which you are using to create the production order and the plant combination.
If it's included means you can remove this setting and try once again.
Check and revert
Regards
Mangalraj.S -
Release Production order in Background
Hello,
Does someone know if there is a functionallity or exit to release a Production order in background even if the order has missing parts and the customizing setting in TA OPJK is set for the relevant order type to indicator 1 ( User decides on release if parts are missing ) !
In background it should release the order automatically in Foreground the the user should decide
Thanks in advance
HolgerThanks for your quick response.
I would like to know if we can run CO05N in background ? I dont want user to execute CO05N.
Do to client business it is not possible to configure SAP system to auto release.
Regards
Seshu
Maybe you are looking for
-
Error while creating Attribute In BPM Object
Hi, I am getting error while creating attributes in BPM Object.I am not able to open BPm object. while opening I am getting Below error. Please suggest. java.lang.StringIndexOutOfBoundsException: String index out of range: 28 at java.lang.String
-
How do I get my HD back to one partition?
I'm done using Windows and Linux, I don't need them for work anymore and I want to erase both and merge the partitions back into Macintosh HD. I was able to remove a few of the Linux partitions, but neither Bootcamp setup or Disk Utility are letting
-
Os 10.4.6/logic 7.2 pro user - trouble installing Waves plugins
on trying to install waves plugins i fall at the first hurdle - actually installing the files to the machine! help thanks dual g4 Mac OS X (10.4.6)
-
Account suspended- how do I re activate?
How can I re activated my Apple ID which has been suspended?
-
Yesterday my phone restored itself. Using a backup that was made a month ago I had no way to stop other than to unplug the phone. Which wipped the phone completely and then when I plugged it back in all it would do is use the old backup again. So I h