Unable to release transport request

I tried to release a request, but when I execute se10, below will have information stated "global information cannot be read", then when I need to release the main request, it will give me the message "Cannot access file
swisapfs01\sapmnt\trans\tmp\DEVE900004.DEV
Message no. PU814
Diagnosis
Access to the file
swisapfs01\sapmnt\trans\tmp\DEVE900004.DEV is not permitted.
The operating system registered the following errors:
Permission denied"
I already granted necessary authorization, anything that had been missed out?

Hi,
You need to login to SAP system.
Type transaction code AL11. A list of parameters will be displayed.
Locate the following parameters DIR_TRANS and DIR_PUT
Against those parameters some values must be placed which will tell you whats your trans directory and put directory.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Unable to release transport request because of control program tp

    I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
    could not start transport control program tp
    But if I directly execute the task 'Release Transport Request' in the task list, it works.
    Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
    Thanks
    Antonello

    I did not find any note about this error.
    Someone can help me?
    Thanks.
    Antonello

  • Unable to release Transport request in CHARM

    Hi all,
          After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
    rgds,
    rajesh
    Message was edited by: rajesh
            Rajesh M

    Dear Rajesh,
    1.Did you released the Task of the request in satellite system?
    2.What error you get when you check inside the task list of that correction.
    Please give inputs,which will help us in solving the issue faster.
    Thanks and Regards,
    Avinash.

  • Unable to release transport request for modified Planning book from Dev Sys

    Hi All
    can someone advice on this:
    We have included a new key figure to our existing Planning book, which is already defined in Planning Area. This key figure is just getting shipping data for comparison and is not having any impact on macros also. We inserted key figure and set the attributes as output only and all looks good in Development system. But when we created transportation request and trying to release request it is giving error "Test Call of transport control program (tp) ended with return code 0208" Message no: TK094
    can any one advice on this
    KV

    Hello,
    Please check with Basis team. I think this is not related to planning book that you are trying to export. A look in the message text gives the following:
    Check the following points:
    Feasibility of the transport control program tp
    Parameter settings in the transport profile
    Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    Write authorization for the subdirectories
    Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed.
    Hope this helps.
    Warm regds,
    Ashutosh

  • Releasing transport request taking long time

    Hi All,
    I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
    In SM50, i didn't find any processes running.
    Can anyone tell me the solution.
    Thanks & Regards
    Uday

    Hi Uday,
    >> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
    You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
    >> In SM50, i didn't find any processes running.
    It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
    Best regards,
    Orkun Gedik

  • Problem of calling BAPI to release transport request

    Dear Friends,
    I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work. 
    BTW, you can refer table E070.
    Could you please kindly give me some idea to solve this problem?
    Thank you in advance.
    Best regards,
    Nick

    Dear Li Nick,
    The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
    Regards, Tino

  • PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

    Dear all,
    I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
    I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
    Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
    Helpful contribution will be duly rewarded.
    Thanks & Regards,
    VICKY

    hi
    vicky just went through your Query regarding release
    of requests..first of all U be sure of TMS configuration
    see whether it is consistent or not.then after Refresh
    the system and then come to release of requests.
    its true that we can transport through scc1 but first
    check about STMS configuration and the way you set
    that.
    Regards
    manjula.

  • Urgent Correction: Release transport request (transport is red)

    Hello!
    Has some one experience to solve the problem bellow:
    By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
    If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
    AGR_1016 table class is 'C'. Entries are only imported to client '000'.
    AGR_1016B table class is 'C'. Entries are only imported to client '000'.
    AGR_PROF table class is 'C'. Entries are only imported to client '000'.
    AGR_USERT table class is 'C'. Entries are only imported to client '000'.
    AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
    Main import
    End date and time : 20071115141115
    Ended with return code:  ===> 8 <===
    The question is:
    I would like to copy some existing role to  cutomer's namespace Z... save the rolle and transport the role via CharM.
    Is it usual to get the error I get?
    Thank you very much!
    regards
    Thom

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Is it is possible to delete released transport requests...

    Hi Experts,
    I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
    Thanks & Regards,
    RAJ

    HI,
    Its not possible to delete the released transport request. You should have to follow transport procedure .
    T-code for Transport Connection- Check in SE09/se10 for creating requests.
    For collecting objects you have go Transport connection without missing the objects.
    SE03 for checking the Request objects.
    Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
    Thanks
    sudhakar.

  • Releasing transport requests with job roles take forever after upgrading to Netweaver 7

    Dear experts,
    Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
    For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
    Afterwards, the import in our QAS and PRD system don't take longer than normal.
    Apparently this time is taken by the Export phase:
    Checks at Operating System Level   
    17.04.2014 09:50:03
    (0) Successfully Completed
    Pre-Export Methods                 
    17.04.2014 09:50:37
    (0) Successfully Completed
    Export                             
    17.04.2014 13:51:02
    (0) Successfully Completed
    Does anyone know what causes this and how to solve?
    Kind regards,
    Nicolas

    Hello Nicolas,
    What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
    To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
    Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
    Hope this helps to investigate the issue
    Regards,
    Archana

  • Database tables holding details for a non - released transport request

    Dear All,
    We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
    SAP kernel release 7.00, kernel patch number 173
    Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
    The problem is the following :
    We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB  command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans  directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
    We are now facing the following conflict :
    One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
    ( This was done during the day of the data corruption)
    When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
    'Request lock on non u2013 existent task / request DEVK921426'
    No details for the transport request DEVK921426 exist in either of the two directories :
    /usr/sap/trans/data   , /usr/sap/trans/cofiles
    The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
    Any clues would be highly appreciated.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Dear Volker,
    Thank you very much for your interest.
    The transport request of interest did not appear in transaction code SE03
    Eliminating the record from table TLOCK indeed did solve the problem.
    Thank you again.
    Best regards.
    Reda Khalifa

  • Creation date for released transport request

    Hello everybody!
    Does anyone know how to find the CREATION date for a released transport request? I've already checked table E070CREATE and it only has entries for modifiable requests.
    Best regards,
    Luís Andrade.

    I think transport is released date field in E070 is overwritten with the releasing date.
    a®

  • Delete Release transport request

    Hi Gurus,
    I need to delete a transport request which is already release. Please let me know what is the best way to do that.
    Thanks
    Liza

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Is it possible to delete a released transport request

    Hello
    I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

    You can but you have to chnage status of the request:
    Use transaction SE38 or SA38 and run program: RDDIT076
    Set your request number and run the program
    After request is shown double click on it
    You should be able to change status from R to D
    And now, you can delete the transport for example in transaction: SE10...
    Help on ABAP: Few Tips for Transport Request Manipulation

  • Releasing Transport Requests

    Hi,
       I want to release trasport requests weekly once,guide me for the same.
    Thanku

    Hi Harshit,
    Releasing a transport request automatically is not a recommended practice .
    It can lead to number of errors and inconsistencies .
    Who will monitor the logs or may be developer want to add some more stuff in same TR.
    So there should be no suggestion  like releasing transport request automatically from consultant end.
    Still if you need you can get some idea from here
    Re: Automatic Release of Transport Request: By ABAP Program
    Regards,
    Gagan Deep Kaushal

Maybe you are looking for