Unable to remote control 'Windows 8' applications running as administrator using OCS 2007 R2

Hi,
While we are doing desktop sharing of a windows 8 system using OCS 2007, we are unable to control a few applications such as CMD Prompt - run as administrator, Device manager, Registry, etc.. even though the UAC setting is 'Never
notify'. Whereas, we are able to control all other applications without any issue. Is this a known issue?
Thanks,
CMR

Hi,
Yes, it is a known issue. Here are other threads for your reference:
http://social.technet.microsoft.com/Forums/lync/en-US/3765a320-c07c-41fe-85e0-1b41750c7218/lync-sharing-desktop-uac-promt-problem?forum=ocsclients
http://social.technet.microsoft.com/Forums/lync/en-US/ef3b0192-9802-42f7-9105-29c62caa5ffd/performing-administrative-tasks-in-a-lync-shared-desktop-session?forum=ocssecurity
http://terenceluk.blogspot.in/2011/03/lync-server-2010-desktop-share-issue.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Similar Messages

Unable to remote control Windows 7 Workstations

I'm having problem with remote control the Win 7 machines. I would get
"Rights Authentication failed. The managed device was unable to contact the
Zenworks server." error message.
It looks like all Windows 7 machines have not been contacting the Zen server
recently eventhough they are all up and on the network. I am not having
problem with the Windows XP machine however.
I can reregister the Win 7 workstation and that would reestablish the
connection to the zen server but it would seem to stop communicating after a
day or so.
Any ideas?
thanks

That does not compute, IMHO
Please specify what ports you opened, since comm. to the ZCC servers
isn't enough for remote ctrl !
Tommy Mikkelsen
IT Quality A/S, Denmark
Novell Support Forums SYSOP / NKP
Sorry, but no support through email
Please join http://www.open-horizons.net
spgsitsupport wrote:
> Firewall is not the issue, as it allows Rem Cont throug domain network
>
> Machine can definitely communicate fine with ZebCC server

Firefox Selenium Remote Control window does not close.

Using Selenium 2.17 and/or Selenium 2.26 on Windows 7 we are having a problem with the Firefox Selenium RC (Remote Control) window not closing after the Selenium tests have completed.
We did not have any issues when using Firefox 10.0.1esr, but when we upgraded to 10.0.10esr the problem showed up.
Any ideas how to solve this problem? Our company requires us to be at the latest ESR release so going back to 10.0.1esr is not an option.
Any plans to resolve this problem in another ESR release?
Thanks,
Karl

Please check SAP note 1512960 and SAP note 1384496.
http://service.sap.com/notes
This behaviour is by design.
Regards,
Stratos

How to protect applications running in Weblogic using OAM

Hi all,
I have a doubt,
I have 2 application running in weblogic.
I need to protect those application using OAM and provide single sign on.
How this can be done?
In the OAM integration guide i saw OAM with BEA Weblogic SSPI
Is SSPI like a connector r what is the use of this?
Is there any other way to protect a application running in weblogic using OAM and provide SSO for those applications
thanks in advance.

You will need to also add the OAMIdentityAsserter and possibly an Authenticator to get group/role information in the weblogic instances (assuming it's not the same one where OAM is installed).
Jack

LV 6.1, 3D Surface Graph sometimes collapses (doesn't work stably); plus blocks use of remotely controlled panel by LV run-time engine (error #26:"window.cpp", line 11518

1) "3D Surface Graph" does not work stably; sometimes it changes its properties (e.g. plot style) without me doing anything prior to that; a couple of times it lost a complete sense so that I had to delete the graph and install it again
2) I tried to remotely run a VI which contains a 3D Surface Graph in it. It turns out, the use of the "3D Surface Graph" somehow blocks the remote control over the panel. As a result of that, I got the following error message: Error #26: "window.cpp", line 11518 (with LabVIEW version 6.1).
3) Is it possible to plug into the 3D Surface Graph a few plots at
the same time since there is a built-in control "plot number" (somehow by bundling them up or putting into an array - I tried both but didn't work) or it can be done merely by use of 'case' structure preceding the Graph, where case structure decides which plot to pass into the 3D graph?
Attachments:
3D_Graph_ver_1.bmp ‏214 KB

Hello mjoler,
Thank you for contacting National Instruments.
The following example will show you how to plot multiple 3D plots on a single 3D graph. Modeling your VI after the example may also alleviate the instability that you have been experiencing.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B123AE0CBA19111EE034080020E74861&p_node=DZ52038
As far as the error you are receiving, it's difficult to say what could be causing this. ActiveX controls embedded on a front panel sometimes do not display on a remote client because they draw and operate almost completely independent of LabVIEW. If possible, try remotely controlling your VI with a client computer that has a complete installation of LabVIEW. The error could also be a bu
g. Try downloading the evaluation version of LabVIEW 7.0 from http://www.ni.com/labview. By doing this, we can determine if it is a bug in the older version that has been fixed in the latest version.
Let me know how this goes.
Matthew C
Applications Engineer
National Instruments

Remotely Control Windows 7 Home Premium

Hey,
So this is my problem: I've got two computers at home. One's a Mac and the other is a Wndows 7 Home Premium machine.
I have Lion Server coupled with ARD 3 and need to remotely control the Windows computer. I have installed VNC 4 (on Windows) but don't know what to do next.
I understand there is a bunch of restrictions within Windows 7 Home Premium when it comes to remote connections but it's something I really need to sort out.
Do you know how to set up ARD with Windows VNC (or any other paths to remote control)?
Any help will be greatly appreciated.
Cameron

Hey,
So on the Windows PC the "Allow Remote Assistance connections to this computer" checkbox is marked.
And on the Mac the error message reads:
"The Mac cannot connect to the Windows based computer.
This problem can occur if:
• The Windows-based computer is not set up to accept remote connections.
• The Windows-based computer is not turned on.
• The Mac, or the Windows-based computer is experiencing network problems.
Try connecting to the Windows-based computer again, or contact your administrator."
Thanks for being so helpful!
Cameron

Window's application run on solaris

Dear
Sun Microsystems
I am Mandar sawant. I am animator. I am using 3d-animation software which required highly configuration computer. And want operating system which give me smooth performs for my 3d-animation software. I am using AutoDesk Maya for my software. So I have some question about this is follow.
1] Can I use my software on this operating system?
2] Is this operating system good for graphic and editing work?
3] What about security in this Os?
4] Is this virus and hacker proof?
5] can i run windows's application on this os? if yes then how?
please reply me soon.

1] Can I use my software on this operating system?Is your software Solaris based or written in Java? If not you will need an emulator to overlay onto Solaris for the OS your software is written for.
2] Is this operating system good for graphic and editing work?While I am not an animator, I have always been very pleased with the performance of Solaris in any task I need to run--yes, and some are animation.
3] What about security in this Os? Unix derivatives are much more secure than Windoz.
4] Is this virus and hacker proof?There is no such thing as virus or hacker proof... if you are connected to a network, then you can make deterants, but nothing is virus nor hacker proof.
5] can i run windows's application on this os? if yes then how? With a Windoz emulator you may as far as the emulator will allow.

Can i turn off any remote control or lock the Apple TV for use with AirPlay only?

I am using multiple Apple TV's in a business environment within one network. It all works fine except the fact that people with a remote control or remote app can configure them, which is unwanted. Is there any way to lock the Apple TV so it cannot be used by any remote feature anymore? Or is there another suggestion that might solve my issue?

Block the IR receiver to stop physical remotes from working.
Use an Apple ID that no one else has for enabling Home Sharing, or don't enable it.
The Remote app requires Home Sharing be enabled on the ATV and that the ATV and iOS device use the same Apple ID.

Remote Control and MSI application Distribution

When I log into several machines remotely and NAL is launched, an MSI
application set to "Force Run" will only work on the first PC I log into.
If I login locally the application is distributed to all the machines
without any problems. Does anyone know about this problem? Thanks in
advance.

Kato,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Unable to open any Windows 8 application

I just recently started experiencing issues when attempting to access Windows 8 apps. There a two different scenarios that are going on and one root cause to the issue that I have found through the troubleshooting steps that have been provided
in various other threads about applications that cannot be opened.
The obvious error that is being seen is "This app does not support the contract specified or is not installed." when accessing settings options such as "Lock Screen Settings". The second issue is when accessing the "PC
Settings" application, it minimizes to the desktop and cannot be upsized.
From the troubleshooting efforts I have taken through various other issues that are similar but not quite this problem, I have identified it is because the profile I am using is lacking a proper Microsoft Account and I need to enter in my credentials to resolve
these problems. The issue with doing that is that when going into the "Your Account Settings" app or the "PC Settings" app I am faced with one or the other of the issues that were mentioned above.
Is there any alternate way to add the my Microsoft credentials to my account to resolve this issue?
Various related articles that I worked through before posting:

Hi,
Please check the answers from
andy562 in this thread:
http://social.technet.microsoft.com/Forums/windows/en-US/6f119828-dd1b-42da-b8b5-c6e6c0d5617c/no-apps-or-windows-store-work-after-upgrading-to-windows-81-enterprise?forum=w8itproinstall
And the suggestions here:
Fix Store App in Windows 8.1
http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
If we still fail to open any store app and PC settings, please help to collect following event logs, upload to Onedrive or similar file service and share the link here for our research:
Kate Li
TechNet Community Support

Unable to remote control Tektronix TBS1062 with USB Interface

Hi,
I have recently downloaded IVI Driver for Tektronix TBS1062 from national instruments. I am using USB communication.I have configured the instrument in NI MAX and can identify the instrument successfully. However I am unable to use any of the other functions using IVI driver. The IVI Step in NI TestStand always passes without any errors and NI I/O Trace shows VI_SUCCESS but I cannot see any chanes to settings in the horizontal scale and the veritical scale as configured by the IVI step. The horizontal and vertical scales always remain the same.
I am not really sure ,But could it be because of the USB interface?? Does the driver support USB?
Did anyone have the same error or Could anyone please help resolve this issue.
Many Thanks
Solved!
Go to Solution.

First thing I would do is make sure the instrument is setup properly to accept commands over the USB.
After that, try sending commands through MAX to see if the scope reacts.
Then make sure you aren't using a simulated IVI session.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

Remote into Windows VNC on a different port using ARD3 Administrator

Hey everyone. I'm having trouble using Apple Remote Desktop 3 Administrator to control a Windows Computer running VNC. My main problem is we use a different port (other than 5900) for VNC sessions. Is there a way to change the port number for VNC sessions on ARD3 admin?

Take a look here:
Remote Desktop: How to specify a port number for a VNC client

How to make GUI application run fast and use less memory?

Hi, there,
My GUI application have:
Menu, toolbar, filechooser, JTable, and log panel.(There is not much file io operation)
When I run it in my machine, it is so slow, and if I run several times, close it after each run, it will run out of my memory. I am using PII266MMX, 256RAM. (When I run another software, such as flashfxp, GUI of which is more complicated than mine, however it is far faster than mine, but I don't think it is written in JAVA), Is JAVA's GUI desktop application not fast?
Regardless hardware factors, what should I pay attention to writing an efficient GUI application?
Can anybody give some advice?
Thanks a lot, thanks .....

Thank you, Denis.
I can run several times of this applicaiton in another machine: PIII866, 256M RAM (windows 2000). I didn't encounter the memory problem, I can open serveral windows of it with that machine.
Why I met this problem in this old machine, I alway get memory not enough problem.(this old machine comes with Win98). Both of machines have same memory(256M).
Could you please give me some hint?
Thanks,
Sitai

How to control windows XP machine with ARD (by using a VNC Client on the PC

I have TightVNC on the Windows machine and I can control it fine with Chicken of the VNC on the Mac; however, I would like to control the Windows machine with ARD like Apple's website states.
How do I do this?
thanks
Matt

Thanks, I found my problem to be the VNC client I was using on the PC's. I was using TightVNC and while it worked for Chicken, it did not work for ARD. Once I installed RealVNC and configured it everything worked beautifully.
thanks
Matt

XLS vs XLT on Windows Server 2012 running CF 10 using (don't say it!) IE

Has anyone else run into a problem with downloading XLT files in this environment that produce a "your file may be corrupted" window when you choose Open, then has Enable Editing button which, if clicked, shows a corrupted file?
Yet XLS of the same file (produced from the same XLT) opens up just fine and dandy with no need to enable editing?
Were you able to solve this somehow?

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Unable to remote control 'Windows 8' applications running as administrator using OCS 2007 R2

Similar Messages

Maybe you are looking for