Unable to remove a video

I am unable to remove a video from my iPhone when I sync it using iTunes.  The video is unchecked in iTunes and I have even gone so far as to delete it from my iTunes library.

Have you tried to turn your phone completly off and back on since syncing with the video unchecked? (http://support.apple.com/kb/ht1430)

Similar Messages

  • Pasword protected bios - unable to remove password

    I have bought a used Lenovo ThinkCentre S20 (model: 45G, type 4157) 
    The BIOS is passwordprotected and I'm unable to remove it. I called the Lenovo support in Finland and was told that replacing the motherboard with a new one is the only solution, can this really be true?
    I'm able to enter the BIOS but saving tyhe changes is disabled. Some fields are view-only, some can be edited. For example the password fields and date/time can not be accessed at all. Fields like boot order can be edited, but since the save-function is disabled there'is no point in making changes.
    The vendor Cruz Broker (sells a lot of used computers) does not have the BIOS password.
    The startup looks like this:
    =======================
    Phoenix TrustedCore(tm) DeskTop for ThinkStation.
    Copyright 1985-2006 Phoenic Technologies Ltd.
    All Rights Reserved
    (c) Copyright Lenovo Corporation 2008 All rights reserved
    (c) Copyright IBM CORPORATION 1981-2005 All rights reserved
    Portions copyright 1998-1999 Intel Corporation
    1024 KB L2 Cache per processor core
    8192K L3 Cache Detected
    System BIOS shadowed
    Video Bios Shadowed
    Fixed Disc 0: ST3500418AS
    ATAPI CD-ROM: ATAPI DVD A DH16A6S
    Mouse initalized 
    ERROR 0162: Configuration Error - Deault configuration used
    ERROR 0198: System Security - Unauthorized BIOS Update Attempted.
    Press <F1> to setup, <F2> to resume
    I've tried to reset bios according to this:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-72076
    1. disconnect the power cable from the back of the system
    2. press and hold the power button until you hear the capacitors drain
    3. open the access panel and move the CMOS jumper from pins 1+2 to pins 2+3
    4. plug in the power cable and boot system
    5. when the system beeps, turn the system off
    6. move the CMOS jumper from pins 2+3 back to 1+2, then repeat steps 1, 2, 3, and 4
    - No change
    I removed the motherboard battery for 20hours and put it back. 
    - No change
    I downloaded the BIOS update from lenovo, updated the BIOS, everything seemed to work ok, but still:
    - No change
    Posting to this forum is kind of the last desperate attempt to solve this but  seems I have to take the computer back to the vendor and get a refund. Unless someone has a solution to provide?

    I double checked this with our BIOS team, and clearing CMOS should clear any existing BIOS passwords.  The steps you list seem a little off though, so I would try the following procedure...
    Disconnect AC power
    Move clear CMOS jumper from pins 1+2 to pins 2+3
    Plug in system power and power on until system beeps.  Then power off.
    Reset the CMOS jumper to pins 1+2.
    Power on system normally.
    If this doesn't work, then I suspect you might not be encountering a BIOS password.

  • Unable to play recorded video using BB multimedia api in other platform

    Hi all,
    I am new to Blackberry application development. The application I am developing it is required to record a video using multimedia api.
    I am using
    video encoding : MPEG-4
    audio encoding : AMR
    res : 320 x 240
    Device using Curve 8250
    It is the same encoding combination BB curve use to record a video from default recorder.
    _player = Manager
    .createPlayer("capture://video?encoding=video/3gpp&width=320&height=240&fps=12&video_codec=MPEG-4&audio_codec=AMR");
    After recording it from my application I am able to play the video in vlc even in BB devices. But when I am trying toplay in android,J2ME and iPhone platform. It is unable to play the video..Can anybody help me out in this regard.
    I am really in trouble. I need your help .
    Thanks in advance.
    Regards,
    Angan

    In my experience if windows media player plays it(the mpeg4), it will not be compatiable with quicktime. At least if you do not go installing the codecs to read ISO mpeg 4 (.mp4 is the standard extension that quicktime puts on the files). Another thing to check is if you are creating ISO compliant files. The mpeg4s that windows media reads by default are not ISO compliant. You also need to keep in mind that Quicktime is a simple profile mp4 and main profile mp4 player (although not all b frames are compatable with quicktime). See http://en.wikipedia.org/wiki/Quicktime for a basic overview of the profile support. I suggest that you try playing the media with free softwares such as vlc http://www.videolan.org/vlc/ and mplayer http://www.mplayerhq.hu/design7/news.html and check that the format and codecs are correct. Although they will play non standard files they will list the codecs in use (make sure that you are using ISO compliant standards as you can put more than MPEG 4 in mp4).

  • Unable to read DVD video

    I unable to read DVD video discs, although I can read DVD-R and CD.
    I try to change the region using regionset but with no change.
    here is the output of vlc, when I try to open DVD:
    VLC media player 0.8.6b Janus
    libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net
    libdvdread: Using libdvdcss version 1.2.9 for DVD access
    libdvdread: Could not open /dev/hdc with libdvdcss.
    libdvdread: Can't open /dev/hdc for reading
    libdvdnav: vm: faild to open/read the DVD
    [00000291] dvdread demuxer error: DVDRead cannot open source: /dev/hdc
    [00000294] vcd access error: could not read TOCHDR
    [00000294] vcd access error: no movie tracks found
    [00000294] access_file access error: file /dev/hdc is empty, aborting
    [00000294] cdda access error: could not read TOCHDR
    [00000294] cdda access error: no audio tracks found
    [00000289] main input error: no suitable access module for `dvd:///dev/hdc'
    [00000278] main playlist: nothing to play
    signal 2 received, terminating vlc - do it again in case it gets stuck
    [00000278] main playlist: stopping playback

    whats in your
    /etc/fstab
    yours is probably
    /dev/dvd         /mnt/dvd    auto      ro,user,noauto,unhide   0      0
    mine is
    /dev/dvd        /mnt/dvd    udf,iso9660      ro,user,noauto,unhide   0      0
    i had issues with some dvd's till i changed from auto to udf

  • Unable to watch rendered video

    I can watch video in real time preview on out monitor but unable to watch rendered video. It is just like a unsynchronized video. What may be the cause?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Unable to Display This Video

    Watching videos at nbcnews.com, some days get message: Unable to display this video. The ads always display, but not the stories.  And only some days. Why?

    You're right that when the apps are available they work better than Safari.  I can't find one for The Last Word, which is my favorite show.  And like I said, the problem seems to be intermittent, so I don't believe that its a Flash issue.  Actually, it's been a couple of days now since I could view The Last Word, so perhaps they are doing something different with their coding than before.
    Thanks for your suggestions... They are helpful.  :-)

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • I am unable to watch Youtube videos on Firefox ?

    I don't know why I am unable to play Youtube videos on Firefox (this problem stated around mid Sept. 2014).
    I explored many solutions but in vain. Firefox/flash (I am not sure) is behaving weirdly, I found some solutions on 'Mozilla Support' when I apply these, I am able to play YT videos but after some time (usually after a re-boot) I get the screen "An error occurred please try again Later" and this cycle repeats. I use a public Wifi/LAN of my university and everyone(using Firefox) has the same problem, and everyone noticed the problem at the same time.
    Some solutions I tried are:
    1. Deleting Cache, Cookies, History etc etc
    2. Uninstalling and Re-installing Firefox and flash.
    3. I do have the latest version of both flash and Firefox
    4. Using Firefox in safe-mode (Sometimes even in safe-mode I couldn't play YT videos)
    5. Disabling Hardware Acceleration (though I use a I5 machine with Windows 7 and Intel(R) 3000 Graphics card).
    6. Tweaking DNS settings (changed my DNS server address to 8.8.4.4 etc)
    7. Degrading to previous versions of Firefox (I used FF 28.0 in Linux worked fine for a while and then the problem repeats itself)
    I am confused, I am not sure where the problem is, because I use Linux(Ubuntu 14.04) and Windows 7 and in both of them Firefox won't play YT videos but Chromium/Chrome does. As I said before videos would play for certain time and then they would stop playing giving me "An error occurred please try again Later......". Another observation is there were only 2 resolutions (1020p and 240p ) available and the result won;t change even if I change them.

    Hi, first of all Thank you for your instant response.
    Yes, I have updated to version 33, Now the problem is not as random as it was before. I found that I have absolutely no issues when I use FF for the first time after starting my computer. At this point there is no issue at all I can watch videos when both logged-in/logged-out and also they work perectly if I switch between flash and HTML5.
    But as soon as I restart Firefox I cannot watch the videos at all. No matter if I am logged in/logged out, I did try HTML5 but still it didn't work. The error message was same in all the cases "An error occurred, please try again later".
    We are secured by "Cyberoam" so I don't have access to proxy sites.
    By the way these observations are for Windows 7.

  • Unable to remove this item from GRIR.  It was a consignment PO receipt done

    Hi Guys,
    The user saying that"unable to remove this item from GRIR.  It was a consignment PO receipt done improperly, so it needs to be deleted".
    Because of this the the material documet which shows $6725.43-(Negative) in GRIR account.when i check this this transation was originated through MI10(Physical inventory differenvces posting).May be user done wrongly.
    Now the problem is this
    -          how this transaction originated?
    -          Why is this posted to GR/IR account?
    -          How do we correct the open item in the GR/IR account?
    -          What need to happen to rectify the mistake?
    can any tell me how can we do this,i will be greatful to u.
    Thanks&Regards,
    Babu,
    09930154536

    Hi Jurgen,
    when i check the material document and accounting document,it was showing that said amount in negative sign and transaction done by MI10 means posted differences with out reference to document.
    it means the user may entered wrongly i think.
    was there any GRIR account for MI10?
    MI10 does not have reversal or cancel?
    so how to resolve it?
    as per my idea it can be done by FI posting.
    please help to resolve.
    Thanks in advance.
    Regards,
    Babu
    09930154536

  • Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

    Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

    Try this first.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    And then try this.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    And ... Are you using the mobile YouTube website?
    http://m.youtube.com/home

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • I am unable to initiate a video chat on facebook from a pc to a new ipad mini.  Is this possible and do I need a special app on my iPad?

    I am unable to initiate a video chat on facebook from a pc to a new ipad mini.  Is this possible and do I need a special app on my iPad?   Receivew a message on the PC after request a video chat with the iPad that the connection is too slow and the iPad does not show an incoming video.  JMaruje

    A Mac Mini s a computer you can use with the iPad.
    YO do not need a computer fro backup since yo can backup to iCloud.
    However, sometimes software glitches occur and require connecting the device to a compute to restore vi iTuunes.
    You can control a computer via an iPod with an app like TeamViewer or LogMeIn. There are others too.
    You can also use an iPad a a SECONDAY monitor for a computer. with other apps.
    You need a dedicated monitor,  keyboard and mouse to setup the Mini. You can use a PC USB mouse and keyboard.

  • Unable to view music videos in iTunes on mac

    I have iTunes on a G5 Mac Pro It is on the latest version of 10.5 with the most recent update to iTunes. I am unable to view music videos many of which I purchased from the iTMS or came with music CD's as extras some are m4v others are mp4.
    If on import I set the option for format as being Music Video I cannot get the videa to launch double clicking on the video gives a picture in the album cover window but does not launch the video viewer nor does the video play. I dont often view  music videos just Movies or TV Shows and last time I did I recall Music Videos playing they opened in a seperate window and there was once a setting in preferences where you could choose if a video launched in a new window or used on in iTunes.
    I have used the info window to change the video type to standard movie and then going back to the file in iTunes double clicking launches the video in full screen mode. Once I then set back to Music Video it reverts to refusing to play.
    In any format the file plays in Quicktime
    Any suggestions pointing to where the problem may lie would be welcome. I cant see any relevant settings to set how a video displays in either menus or Preferences other than ensuring video window stays on top. It maybe in one of the many upgrades this Mac and iTunes has had the settings have been corrupted.

    They will not show up in a separete category in iTunes. This is because the videos will show up as songs so that you can play the audio portion of a video without the video. Try it.

  • When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

    Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

Maybe you are looking for